Stock not showing properly in for Batch determination

Dear Gurus,
While doing the following msg appearing since JAN 01, 2008, IN BATCH DETERMINATION THE SYSTEM NOT SHOWING EXACT QUANTITY AS IN ACTUAL STOCK
Pls help for this issue,
Regards,
Atul

Dear Jagdish,
In MMBE in unrestricted use column there is total 16.979 stock position is there and again for posting ( PGI ) after delivery for selecting batch determination Available Qty is showing 9,999,999,999.000
How I will correct it could not understand.
Regards,
Atul

Similar Messages

Table for batch determination date

hi,
im printing the Dispensing slip...they want the output based on the batch determination date..
can any one tel me in which table i willl get batch determination date?
Regards
Smitha

Are you using a separate batch selection class versus the batch class?
There are characteristics that must be in the selection class, but cannot be in the batch class.
See OSS note 33396.
1. If you want to search for batches on the basis of a remaining shelf
         life in batch determination, the system has to calculate a requested
         shelf life expiration date dynamically from the information you
         give.
     2. Add characteristic LOBM_VFDAT to the batch classes.
         For the revaluation of reference characteristics, refer to Note
         78235.
         Characteristics LOBM_RLZ and LOBM_LFDAT must not be included in the
         batch classes!
     3. Add characteristics LOBM_VFDAT, LOBM_LFDAT, and LOBM_RLZ to the
         selection classes.
         Maintain a remaining shelf life in the strategy records for batch
         determination. Relational operators (> , < , <= , >=) are considered
         in the dynamic calculation of the shelf life expiration date in
         batch determination.
From your note you have placed LOBM_RLZ and LOBM_LFDAT in your batch class. You cannot do that.
FF

BDC FOR VL02N FOR Batch DETERMINATION --ERROR IN BACKGROUND

HI,
I am running a BDC in Background Mode for VL02N Transaction for Batch Determination. When i run this BDC in Foreground its working Fine, But when i use Background Mode its not working.
Error in Messtab : LIPS-POSNR(1).
Flow is like : Vl02n - enter delivery..then select a material in that delivery and click on batchdetermination.
So its giving me error in LIPS-POSNR(1).
Can u suggest something..
Thanxs
RISHI

Hi,
Check whether proper ok-code has been assigned to the line to be selected in back ground, in foreground as there is always a manual intervention,we will never come to know these kind of trivial issues,
Rgds,

Filter for batch determination of production order

Filter for batch determination of production order
Dear guru ,
We trigger batch determination manually for every production order using CO02.
How can I understand whose are the production orders arenu2019t taking place batch determination?
Checking all the production orders is too heavy ?
Does exist a massive transaction (coois or others) where I can select the production orders with components not assigned to the batch ?
Thanks in advance

Hi
In COOIS > In the initial screen select Documented Goods movement in the list Field along with and other selection criteria and run the Report
In the list of orders > Expand corresponding order to view Documented goods movements list with the components with and w/o batch numbers
Regards
Brahmaji

Adding one more field in field catalog for batch determination

Hi,
I am configuring batch determination..I need to create condition table based on plant and material type... but material type field is not there in the field catalog...I need to add field MTART (Material Type) in the field catalog. can you please guide me how to do that...
Thanks
Kumar

Hi Kumar,
Go to SPRO---Batch Management---Batch Determination and Batch Check---Condition Tables--Define Production Order Condition Tables here select Conditions: Allowed Fields (Process Order) here first add the field MTART Material Type then it will be available Condition Table for Batch Determination.
Regards,
R.Brahmankar

After upgrading to iOS 8, the weather app does not show up results for any of the Indian States/cities

After upgrading to iOS 8 on my iPhone 5, the weather app does not show up results for any of the Indian States/cities. Can Apple look into this or does anyone have a solution to this.

Swipe from bottom of days listed ("Wednesday, Thursday, Friday, etc") upwards. I thought it was gone too but it's still there~just takes different way to access it.

My mini with IOS 7.0.6 is not showing an option for wish list in the options. What is happening?

My mini with IOS 7.0.6 is not showing an option for wish list in the options. What is happening?

The three Rs to IOS, try them in order until the issue is resolved;
Restart - Press and hold the Power button until the red Power Off stripe appears. Swipe to power off. Press and hold the Power button to turn the device back on.
Reset - Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons.
Restore - Connect the device to the Mac or PC with which it is usualy synced and use the iTunes app to restore the device to the factory settings. You can then restore the device with a previously made backup or set it up as new.

Tables names for Batch determination

tables used for Batch Determination screen in MIGO?
Regards,
pandu.

Dear Pandurangarao,
For your future requirements,
You may also check the same (i.e. Table Name/ Field Name/ Program Name/ Screen Field) by yourself.
There are few requirements:
1. You have to decide from where (i.e. Document..???, say Sales Order in VA02) you want to fecth the data for your requirement.
2. Go in to that document (say, you wanna all data to be fetch from Sales Order; then VA02).
3. Click one within the field and Press F1. This will open an Overview window. In to the same window, down there, you will find on e Tab: Technical Information. Click the Tab.
4. Now, you may get all technical informations for your inputs.
Best Regards,
Amit

Listener not showing the instance for informix.

Hi All,
I am using oracle gateway 11g and here I just discovered that the one of the database listener not showing the instance for the informix gatways, though it has already configured. whereas on other database , the listner is showing the instances for informix database. it was running fine few days back though.
would appriciate , if you coule let me know that why it suddenly stop responding ?
----------------- OK Listener ----------------------------
ptmsap> lsnrctl status LISTENER_PTMSAP
LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 29-JUL-2012 05:07:07
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=10.222.68.34)(Port=1621))
STATUS of the LISTENER
Alias                     LISTENER_PTMSAP
Version                   TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start Date                19-JUL-2012 10:25:25
Uptime                    9 days 18 hr. 41 min. 41 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /db/ptmsap11/oracle/product/11.2.0/network/admin/listener.ora
Listener Log File         /db/ptmsap11/oracle/diag/tnslsnr/tbx4new/listener_ptmsap/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.222.68.34)(PORT=1621)))
Services Summary...
Service "MSCARD4" has 1 instance(s).
Instance "MSCARD4", status UNKNOWN, has 1 handler(s) for this service...
Service "as400" has 1 instance(s).
Instance "as400", status UNKNOWN, has 1 handler(s) for this service...
Service "db2test" has 1 instance(s).
Instance "db2test", status UNKNOWN, has 1 handler(s) for this service...
Service "ptmsap" has 1 instance(s).
Instance "ptmsap", status UNKNOWN, has 1 handler(s) for this service...
Service "tg4ifmx" has 1 instance(s).
Instance "tg4ifmx", status UNKNOWN, has 1 handler(s) for this service...
Service "tg4trai" has 1 instance(s).
Instance "tg4trai", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LISTENER_PTMSAP =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = TCP)
          (Host = host_ip)
          (Port = 1621)
SID_LIST_LISTENER_PTMSAP =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = ptmsap)
      (ORACLE_HOME = /db/ptmsap11/oracle/product/11.2.0)
      (PRESPAWN_MAX = 10)
   (SID_DESC=
     (SID_NAME=tg4ifmx)
     (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
     (PROGRAM=dg4ifmx)
   (SID_DESC=
      (SID_NAME=tg4trai)
      (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
      (PROGRAM=dg4ifmx)
   (SID_DESC=
     (SID_NAME=db2test)
     (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
     (PROGRAM=dg4db2)
   (SID_DESC=
     (SID_NAME=as400)
     (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
     (ENV="LD_LIBRARY_PATH=/db/ptmsap11/oracle/product/11.2.0/dg4db2/driver/lib:/db/ptmsap11/oracle/product/11.2.0/lib")
     (PROGRAM=dg4db2)
(SID_DESC=
    (SID_NAME=MSCARD4)
    (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
    (PROGRAM=dg4odbc)
    (ENVS=LD_LIBRARY_PATH=/opt/minisoft:/db/ptmsap11/oracle/product/11.2.0)
+++++++ Not OK Listener++++++++++++++++++
LISTENER_SMI =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = TCP)
          (Host = host_ip)
          (Port = 1821)
SID_LIST_LISTENER_SMI =
(SID_LIST =
     (SID_DESC=
     (SID_NAME=SMICAN)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
     (PROGRAM=dg4db2)
        (SID_DESC=
        (SID_NAME=SMIINTL)
        (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
        (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
        (PROGRAM=dg4db2)
        (SID_DESC=
        (SID_NAME=SMIMEL)
        (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
        (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
        (PROGRAM=dg4db2)
        (SID_DESC=
        (SID_NAME=SMIMRKTS)
        (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
        (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
        (PROGRAM=dg4db2)
LISTENER_PTMQA11 =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = TCP)
          (Host = host_ip)
          (Port = 1521)
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = ptmqa11)
      (ORACLE_HOME = /pdsdev/ptmqa/oracle/product/11.2.0/db)
      (PRESPAWN_MAX = 10)
   (SID_DESC=
     (SID_NAME=tg4ifmx)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (PROGRAM=dg4ifmx)
   (SID_DESC=
      (SID_NAME=tg4trai)
      (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
      (PROGRAM=dg4ifmx)
   (SID_DESC=
     (SID_NAME=db2test)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (PROGRAM=dg4db2)
   (SID_DESC=
     (SID_NAME=as400)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib)
     (PROGRAM=dg4db2)
(SID_DESC=
    (SID_NAME=MSCARD4)
    (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
    (PROGRAM=dg4odbc)
    (ENVS=LD_LIBRARY_PATH=/opt/minisoft:/pdsdev/ptmqa/oracle/product/11.2.0/db)
)Regards
Edited by: 937853 on Jul 29, 2012 2:10 AM

thanks all, I was able to solve the issue. it was indeed a port no , which caused this issue.

Thai characters not showing properly

Hi,
When creating a product catalog in thai language the characters do not show properly. The characters have small aspects attached to them that hover above as you can see here http://www.gte-premium.com but when editing in Indesign the small aspects that are meant to hover above overlap the portion of the character below and are not aligned left to right properly.
I have tried every thai-friendly font I can find but this does not fix the problem, how can I amend this?
Thanks in advance

If you're using a well-made font, you can probably get the tone marks to behave by turning on the World-Ready Composer. It's exposed in InDesign CC and CS6, in the Paragraph menu I think, but if you're using an earlier version of InDesign it's a hidden feature that you would need to use a script or a plugin to turn on.

Chess.app runs OK on my MacBookPro under OS 10.6.8. Under the same OS on my Mac Pro Chess.app will not show the hint for the next move.

Chess.app runs OK on my MacBookPro under OS 10.6.8. Under the same OS on my Mac Pro Chess.app will not show the hint for the next move. The detail on the desktop MacPro is
Model Name:    Mac Pro
Model Identifier:    MacPro1,1
Processor Name:    Dual-Core Intel Xeon
Processor Speed:    2.66 GHz
Number Of Processors:    2
Total Number Of Cores:    4
L2 Cache (per processor):    4 MB
Memory:    1 GB
Bus Speed:    1.33 GHz
Boot ROM Version:    MP11.005C.B08
SMC Version (system):    1.7f10
Serial Number (system):    G87212BJUPZ
Hardware UUID:    00000000-0000-1000-8000-0017F20A3C06

Hello
did the keaybord shortcut work ?
For info chess app come from system install
HTH
Pierre

Onlive TV listing does not show HD listing for series when I try to create a recording

It happened now already several times the the "Online TV Listing" does not show HD listing for series when I try to create a recording. Instead, it will show two series options in SD. Is this to make people use less bandwidth?
Here is what I am doing:
I go to this link https://www.verizon.com/fiostv/myservices/members/fiostv.aspx
Then to ...........DVR Manger
select ...........Record A Show
I type search e.g. Nathan for You
I click on ........Search
and I select ......Click here to Show Details
Then I get to chose from 2 (the same) SD channels.
Nathan for You
190 Comedy Central
Tue, Jul 29 10:30 PM
Record Show Record Series
Nathan for You
190 Comedy Central
Tue, Aug 05 10:30 PM
Record Show Record Series
But there is the same on channel 690 HD!
This happens not only to this particular channel!
I remember it used to show also the HD channels.
The only way to schedule in HD is to find the listing in the TV schedule, at the right time and there you will get the
correct choices for both SD & HD.
Can this be fixed?
Thanks!

On the right click on HD under video quality to filter it.

Anychart labels not showing properly..

Hi all...
Anychart Version: 5.1.2
I have a bar simple bar chart which calculates surgeons and their percentage of surgeries.
x axis: surgeon name (labels rotated to 90 degrees)
y axis: percentage
If i am just showing 10 surgeons it is showing properly.
But if am trying to show all the surgeons (around 100 surgeons on x axis).
The Flash chart x axis labels are not showing properly
In this thread..Austin suggested to increase the width of the chart
APEX Flash Chart labels not displaying
If i increase the width the labels are showing properly. But the chart looks so ugly with huge width. Is there any other way to show the labels properly
without incresing the chart width
In Mozilla filefox i checked the XML returned. In the XML it is showing the labels but in the chart
it is not showing up.
Sample X axis..
The X axis is looking like this..
s s
u u
r r
g g
e e
o o
n n
1 3
It is not showing the "surgeon 2" which is between 1 and 2
This is custom XML that i am using..
<anychart>
<margin all="1"/>
<settings>
<animation enabled="true"/>
</settings>
<charts>
<chart use_anychart3_data_model="true" use_sets_colors="false">
<chart_settings>
<title enabled="True" vertical_padding="30">
<font bold="True" size="15" />
<text>Death by Surgeon</text>
</title>
<subtitle enabled="True">
<background enabled="false" />
<font bold="False" size="15" />
<text>Arranged by Increasing Annual Rate of Procedure</text>
</subtitle>
<footer enabled="true" align="Center" padding="30">
<background enabled="false" />
<font bold="False" size="12" color="Red"/>
<text><![CDATA[Notice: This report generated considered privileged and confidential. &APP_TIME_STAMP.]]></text>
</footer>
<axes>
<y_axis>
<title><text>Percentage</text></title>
<labels>
<format>{%Value}{numDecimals:0}</format>
</labels>
</y_axis>
<x_axis tickmarks_placement="Center">
<title><text>Surgeon</text></title>
<labels rotation="90"/>
</x_axis>
</axes>
</chart_settings>
<data_plot_settings default_series_type="Bar">
<bar_series>
<tooltip_settings enabled="True">
<format>
{%SeriesName}{numDecimals:2,thousandsSeparator:}
{%YValue}{numDecimals:2}%
</format>
</tooltip_settings>
<bar_style>
<states>
<normal>
<fill color="%Color"/>
<border color="DarkColor(%Color)" thickness="1"/>
</normal>
<hover>
<fill color="LightColor(%Color)"/>
<border thickness="2"/>
</hover>
</states>
</bar_style>
</bar_series>
</data_plot_settings>
#DATA#
</chart>
</charts>
</anychart>please help me to solve this

Hi,
100 columns is a lot of columns. I understand why you are having this issue. I think you have two options here:
First, you could use a scrolling chart.
your x-axis custom XML would look something like:
<x_axis tickmarks_placement="Center">
<title><text>Surgeon</text></title>
<labels rotation="90"/>
<zoom enabled="true" allow_drag="false" />
</x_axis>Second, you could reduce the font size of the labels on the x-axis to a very small number, so that the text of the label is not wider than the column width. With 100 columns, you are probably talking about a terribly small font size, probably making it unreadable.
your x-axis custom XML would look something like:
<x_axis tickmarks_placement="Center">
<title><text>Surgeon</text></title>
<labels rotation="90">
<font size="4" />
</labels>
</x_axis>Austin
Edited by: AustinJ on Feb 11, 2011 11:13 AM - fixed typos

Device not showing in iTunes for 'Wi-Fi Sync' and 'Sync Now' on phone only works(appears dark) when plugged in via USB so kinda defeats object. Any ideas please?

Device not showing in iTunes for 'Wi-Fi Sync' and 'Sync Now' on phone only works(appears dark) when plugged in via USB so kinda defeats object. Any ideas please?

Had the same issue. Tried everything that was posted for troubleshooting bye apple and on the discussions.
Finally, tried something that solved it and it works flawlessly now. I changed my wireless router.
I was using my ISP's supplied ZyXEL PN660 ADLS2+ with Wireless N. Swtiched to an older Linksys WRT160N and it is working beautifully now.
Take a look at your router, make sure the firmware is up to date, and that UPnP is enabled, and if all is correct, and you have done everything else, try another Wireless router if you can.

How do I determine the size of an event (cmd I does not show any size for events).

How do I determine the size of an Event in iPhoto? (Cmd + I does not show size information at the event level).

If you're running iPhoto 8 (09) select the event and look at the Info pane at the lower left hand corner of the window. It will give you the number of photos and size:
for iPhoto 9 (11) open the Event, select all of the photos in it and open the Info drawer at the right by typing Command+i. The number of photos and size will be at the top of the Info drawer.
OT

Stock not showing properly in for Batch determination

Similar Messages

Maybe you are looking for