Stock not updating after STO?

There are two plants 5000 and 7000.Plant 5000 transfer material to plant 7000 with STO process. But after STO process stok of plant 7000 is updating (addition) but stok of plant 5000 is not reducing..Both material document is showing right quantities .

Hi,
Check which MOVEMENT TYPE you are using when transference (issue) for that movement QTY UPDATE should be active
go to OMJJ and Put your movement type and then at left side option UPDATE CONTROL/WM movement type.
It could also happen if the Delivery against STO is not created as in such case , stock is not reduced from the Supplying Plant. Else check the Settings at Plant Level in T Code OMS2 if it's happening for every Material from any of these two Plants.
Sridhar.

Similar Messages

Stock not updated after GR with 103 & 105 movement types

Hi All
I have raised one GR(MIGO) with ref to PO and movement type as 103(GR for PO with GR blocked stock).
The same was released in MIGO using movement type '105'and stock type selected 'Unrestricted use'.
After first step, In MMBE stock updated under 'GR Blocked Stock'.
But after second step no stock was updated in 'Unrestricted use'.
the actual scenario is:
The receipts from vendor for a PO need to be blocked and then later should go to unresticted use.
Can any body help me how to address this and Tcodes need to be used.
Regards
Nageswara...

Hi GSC
Thanks for your reply and it is some what understandable.I have few more questions.
1.Is it possible to create PO with out Account and Costcenter not assigned. If so what is the impact.
2.My current settings were not allowing to create the PO with GL account and Costcenter.
M just confused with the "PO with account assignment" concept. Could you spare some time for this and help me to understand?
Thanks in advance
Nageswara...

Stock not updating after doing MIGO (gr) for third party sales

i am doing third party sales, after creating PO with PR and updating stock through Migo , i am not able find the stock, but i can see through MB51 only , i am see the stock through MMBE or MB52

Dear friend
Hope you are clear about third party process
In third party process vndor supplies the goods directly to customer and the goods does not come to our premises at all
In many of the scenarios that i have seen there is no MIGO itself done
To have MIGO is purely optional in third party
I am enclosing here with the threads which were discussed on the same
Forum post in ERP - Sales and Distribution (SD) General: MIGO- why we do it in third party sales?
MIGO- why we do it in third party sales?
Forum post in ERP - Sales and Distribution (SD) General: Why MIGO is required in thirdparty scenarion?
Why MIGO is required in thirdparty scenarion?
The stock updation after MIGO is posted directly to consumption account and we dont keep the stock
So it is not seen in MMBE or MB52 (which is a physical inventory orstock report)
The stock is not there? How can you see that ?
If still you want to see the stocks this is entirely against business logics and consult with your MM and FI colleagues (as this query is their area of operation)
If the third party process is happening with item category TAB then stock updation will take place after MIGO and you can see the same in MMBE/MB52
If not happening means there is some customization error with the PO from MM side Check with MM colleague
Make sure if the item category is TAB then schedule line category is CB
In VOV6 for schedulle line category CB
NB is the order type
0 is the item category
E is the account assignment category
Regards
Raja

Moving Average Price and Total Stock not updated for MTO scenario

We are using MTO with planning strategy 20, individual collective indicator is 1 (individual requirement only) and price control is V for finished goods. We are facing the following problems after we perform GR of above FG from MFBF (Repetitive -run schedule header):
1)Total Stock field (LBKUM)in Accounting View 1 remain as blank but the sales order stock is appear in Stock Overview screen.
2)Moving average price does not updated after periodic settlement is carried out.
It seem that problem can only be resolved if we change the planing strategy to MTS (ex:40), appreciate that if any of you can provide the solution.
p/s: on ECC5 system.

Hi,
Good morning and greetings,
The standard SAP says as below
The Raw Materials should have MAP 'V' and the SFG and FG should have the price control as 'S' basically because the standard costing variant PPC1 uses the sequence of Standard Price as the first update at the time of price update and settlement.
I presume MFBF is used for Repetitive Manufacturing and not for MTO scenario...Repetitive Manfuacturing is MTS scenario...Goods receipt of production order is normally done through MB31.
If you still want to use the MAP for FG and SFG then you will have to change the costing variant appropriately to pick the MAP first at the time of goods receipt and settlement.
Please reward points if found useful.
Thanking you
With kindest regards
Ramesh Padmanabhan

PO item change is not updated after Delivery completion

Dear All,
PO item change is not updated in the PO at the completion of the delivery.for a particular line item. In our QA system, its updated but client is facing an issue with the production system. Pls check the attached screen which I got from QA. There is no such log in the production system. Kindly help me to have a solution for this.
Regards
Sujith

Hi Dev,
After we post the GR for a PO line item, PO history is updated (line) and at the same time that particular change log is available under PO line item. But in production system, said log is not updated after GR is completed fully.
Rgs
Sujith

Recent files list is not updating after 10.1.13

Recent files list is not updating after 10.1.13 update unless I open the file via the Network in Windows Explorer. If I open a file by accessing the file via a drive listed under Computer, the recent files list does not update. The recent files list updates only if I open the file from the same drive listed under Network.

Hi Bert ,
You might want to report for a possible bug.Please refer to the following link for the same.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
Regards
Sukrit Dhingra

Picked Quantity is not updated After delivery in Vl03n

After delivey in Order (VA03), the picked quantity is not updated Properly(VL03n). It is coming as Zero.
Is it any configurations needed or writng any code.
For that I put Break point in FMs like SD_DELIVERY_UPDATE_PICKING in program RVADEK01.
But it is not stopping the Program.
Please give any possible solution.

Hi Vinod,
Thank u For ur Answer.
Just my Fuctional Consultant given Procedure.
How to test the picking list. The problem is after Deliver the Order quantity in VA03 and after saving, this will creates One Out Bound delivery.
Now We r checking VL03n. Now it is updating the Picked Quantity Correctly, For that We r using the Standard Print program: RVADEK01, Form: RVPICSKSIN.
Output Type: EK00, Application: V4.
Here My problem is We copied the Form and print Program and modified according to our requirement and they configured in Nace with our own Output type. We haven't chenged the updated Functionality and Not even Standard program. We wrote some include program for getting new values in scripts.
Now the picked quantity is not updated after picking in VL03n.

Node.length not updating after removeInstance

I have a dynamic form where line items can be added dynamically. I also have a button to remove the last line item. The code worked fine until Acrobat 7.0.7 now I get an error that the index in the removeInstance method is invalid. After doing some debugging it appears that the node.length is not updating after a removal of an instance.
For example, the form starts with 1 line item. (node.length = 2, index = 0)
I can successfully add a new line item (node.length = 3, index = 1)
I then can add another line item (node.length = 4, index = 2)
I can successfully delete the last line item (index = 2) using the following code:
var nodelength = form1.items.nodes.length;
//need to know which instance is being removed
if(nodelength>2){
items.item.instanceManager.removeInstance(nodelength-2);
else if(nodelength==2){
form1.items.items.Status.rawValue = "";
form1.items.items.guestName.rawValue = "";
form1.items.items.Payment.rawValue = "";
form1.items.items.Entree.rawValue = "";
At this point the items.node.length property should be 3 but it remains 4 thus causing an error when running the above script again because there is no corresponding item to remove.
This appears to be a bug - but if I am doing something wrong please let me know. If it is a bug, please fix it.

This sounds like a bug I recently encountered. If it's the same thing then calling xfa.form.remerge() after the removeInstance() should correct the problem. If it is the same issue, it's already been logged in order to get it fixed.
Chris
Adobe Enterprise Developer Support

Thumbnails not updating after external editing.

I noticed the thumbnails are not updating after I use an external editor. When I bring the images full screen are they are representing correctly, but when I leave full screen the thumbnail still is not the latest image.
I tried the update preview and Aperture said it they are updated, so I did an option and update preview and that corrected them, but this should be happening automatically.
I did try restarting Aperture before the doing the "option - update preview" and that had no effect.

Do you mean it is suppose to be fixed in 3.0.1? Or do I have to wait until a 3.1 comes out.
I am using 3.0.1 now and that is where I am seeing the issue.

Ipad mini apps not updating after ios8.2 update

apps not updating after software update ios8.2 on ipaD MINI WITH RETINA SCREEN

Turn off any auto-update, if it is on, then tap any of the "circle icons" showing that a download is in progress, in order to stop the download. Then go to the Settings and reset the Network Settings. After the iPad starts back up, then check to make sure no apps are currently in progress of downloading. If any are, stop them again, and reset the network settings again. When it starts up again, none should be in the process of downloading. Then from that point forward, only download manually and never more than two at a time. If it is more than 100 MB, then do only one at a time. If any gets stuck at that point, then stop the download and reset the Network settings.
That should take care of you for now. We'll see what another update brings ... IOS 8.2 (which might be the next one).

Database history growth not updating after EHP upgrade

Hi All,
We are using SAP ECC 6.0 (731 - SP09 ) & DB2 Fix pack 5 version.Database history growth not updating after EHP upgrade. I have check collector job running fin and DB tab > Configuration > Data Collection Framework > Configuration Collector are in green status.
Please help me to resolve this issue.
Regards,
MK

Hi MK,
You can try few things:
1. Check to collector standard job like SAP_COLLECTOR_FOR_PERFMONITOR should be running succesfully.
2.If you can check to data collector collection interval column , you will find it to be Not Schedule.
Try with Repair all collector.
To make it work properly you have to perform
Data Collection Full
Data Collection Incremental
Hope it helps
BR Vaibhav

[svn:fx-i11] 5489: i11 branch: Fix SDK-20148 Group bounds do not update after moving a child UIComponent

Revision: 5489
Author: [email protected]
Date: 2009-03-23 10:04:25 -0700 (Mon, 23 Mar 2009)
Log Message:
i11 branch: Fix SDK-20148 Group bounds do not update after moving a child UIComponent
Fix: add a method in GroupBase that's called whenever child x,y changes in UIComponent. GroupBase invalidates layout when autoLayout is true.
QE Notes: None
Doc Notes: None
Bugs: SDK-20148
Reviewer: Deepa
tests: checkintests, mustella
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-20148
http://bugs.adobe.com/jira/browse/SDK-20148
Modified Paths:
flex/sdk/branches/i11/frameworks/projects/flex4/src/mx/components/baseClasses/GroupBase.a s
flex/sdk/branches/i11/frameworks/projects/framework/src/mx/core/UIComponent.as

FYI - This regression has been filed here: http://bugs.adobe.com/jira/browse/SDK-31989

Regisrty keys HKEY_CLASSES_ROOT\Photoshop.Application\CLSID and \CurVer are not updated after upgrading to cc 2014

Regisrty keys HKEY_CLASSES_ROOT\Photoshop.Application\CLSID and \CurVer are not updated after upgrading to cc 2014
this cause to "cant create ActiveX object" error in VB Scripts
win7 x64, ps cc 2014 x64
any ideas? thnks

All I can so is show you what I see in that area of my Windows 7 registry but I have CS2, CS6 32, CS6 64, CC 32, CC 64 and CC 2014 64 installed. 6 versions yet there seem to be 9 Photoshop Application dot keys.
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Photoshop.Application]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application\CLSID]
@="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
[HKEY_CLASSES_ROOT\Photoshop.Application\CurVer]
@="Photoshop.Application.80"
[HKEY_CLASSES_ROOT\Photoshop.Application.60]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.60\CLSID]
@="{99aea70e-4d13-44bf-a878-33345cbfcbc8}"
[HKEY_CLASSES_ROOT\Photoshop.Application.60.1]
@="Photoshop CS6 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.60.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.70]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.70\CLSID]
@="{951ec38c-3de6-4bb8-8246-adf182e6421d}"
[HKEY_CLASSES_ROOT\Photoshop.Application.70.1]
@="Photoshop CC Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.70.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.80]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.80\CLSID]
@="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
[HKEY_CLASSES_ROOT\Photoshop.Application.80.1]
@="Photoshop CC 2014 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.80.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.9]
@="Photoshop CS2 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.9\CLSID]
@="{16aa0b9e-79ac-43b5-86ca-ab961fbeed5f}"
[HKEY_CLASSES_ROOT\Photoshop.Application.9.1]
@="Photoshop CS2 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.9.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"

Infostructure S502 not updated after certain date

There is an infostructure S502. It is not updated after a certain date.
It should be updated after saving in C011N.
This problem seems to have propped up after upgrade to ECC 6.0. Before that it was working fine.

I have tried a lot but still S502 is not properly updated. Basically the field for date i.e SPTAG is empty. Due to this when we try to select from MCRQ based on dates, no data is selected.
Is it because of some setting in MC23?

Average Active Sessions graph not updated after restart

Hi,
I just wanted to ask - I have restarted a database (11.1.0.7) with GC 11.1.0.1 but after the restart of the db the graphs on a performance tab are not updated. It means that the doesn't refresh and doesn't show actual data...
I checked jobs on the target database and GC repository but nothing is broken. Info on Home tab of the target DB is actual but not the graphs..
I also tried to clearstate and restart the agent but no change..
Any idea?
Thanks

This is a bug and can be solved by applying
Patch 10307099: PERFORMANCE CHARTS DO NOT UPDATE AFTER DATABASE IS RESTARTED
This patch is included in the july 2011 PSU: Grid Control Patch Set Update 11.1.0.1.4 for the Oracle Management Service, see MOS doc ID 1334286.1
Eric

Stock not updating after STO?

Similar Messages

Maybe you are looking for