Stock now showing in MD04
Hi,
I have a material for which stock is showing in mmbe... but same stock is not showing in MD04...screen shots attached.....what could be the reason...
Thanks
Kumar
Hi Rupesh,
Doing more analysis I found out that in MD04 Available qty column is not coming in display....
as shown below...
normal display will be like this..
Where I need to make the setting so that Available qty column appears..checked in SPRO but nothing found...
Thanks
Kumar
Similar Messages
-
Sales Order number is not showing in MD04
Hi Gurus ,
I have got one case where Sales order number is not showing in MD04 screen . This sales order , line item has already delivered , PGI & billing document also been generated . Moreover accounting document is also been created .As cheeked & found that it is not shwoing in MD04 screen because at the time sales order creation availability check “01” was maintained which has sum up all the requirement in one particular day ( Also as
per SAP note -70408) .
Now because all the subsequent document has been generated for sales order so we can not mark it for “Rejection for rejection “ & to create new sales order with availability check “02” in material master .
Please let me know the possible solution for the same or if any sap note would be required to get the sales order number in MD04 .
Thanks ,
AmanHi Kiran ,
Actually before running the report in “SDRQCR21” in PRD I wanted to run it in “Quality “ .
In quality I am not able to simulate the same .
Please refer below points related to my testing result .
1.Mainatined availability check group “01” .
2 . Created Sales order
3. Check in MD04 screen & as expected sales order was coming blank with negative Qty .
4. Run the MRP which generated PR
5. PR converted to PO & GRN was done which updated the stock
6. Created delivery & checked the same in MD04 . It was also coming blank . No delivery document numbe was showing in screen but it was coming with negative Qty .
7. Done the PGI & blank delivery document number was removed & it become normal .
In PRD .
There are 3 sales order
One sales order is already marked reason for rejection & two sales order delivery , PGI has been done .
But still it is showing blank sales order with negative Qty & after MRP run it is generating the PR also .
I don't why it was showing with negative values .
Please refer attacehed screen shot .
Thanks,
Regards ,
Aman -
Demand for Partial Schedule line not showing in MD04?
Hi All,
An SO with around 1200 line items, having problem with one line item, ordered qty is 20. Shipped a partial line of 6qty.Schedule line was showing order qty of 20, confirmed qty 6 but no second schedule line for the balance of 14 and the demand for the open qty 14 is not reflected in MD04. Tried manually and also manually running MRP for the item but neitger created a second line or triggered the demand to show in MD04.
Thanks in Advance.
Thankyou and Regards
Hatti.Try creating the schedule line in the order and then running MRP for the demand to show in your stock requirements.
-
Delivery is still showing in md04
Hi pp gurus,
I already posted delivery for the S.O. but still it is showing in MD04. MTO 20 SCENARIO
kINDLY TELL ME what is the problem.
urgent ,thanks in advanceHi
please describe the lines in MD04 incl the different quantities in detail:
Date Rec./req.qty Available qty
14.2.2008 Stock (at plant level)
Sales order stock
Delivery
From your mail I understand that the situation is as follows:
Delivery item quantity 172
Material document quantity 172
From delivery item you can go one level down and look at the scheduling lines: What is the situation there?
From delivery - document flow, you can also see the sales order. What was the quantity of the sales order item?
Eivind -
Batches having No stock still showing in BMBC
Hi ,
In my senario for material x , having 5 batches.
Out of these 5 batches 3 is having stock and 2 dont have any stock. Still that 2 batches i am getting in MMBE and BMBC with 0 stock
In this case this problem has happened with only one customer material not for all
Can any body tell me how to avoid these batches to reflect it in BMBC and MMBE.
Thanks
AmitThere is a section of BMBC that will only show those batches with stock. Once you run the selection list, from the menu, select Batch Info Cockpit --> Display selection result for stock
There is also a stock tab or screen available that has an indicator "No zero stock lines". You should make sure this tab exists in your selection screen. You can set this to True in a variant and save the variant as a default. You should not have any zero line items displayed then.
You should only see material with stock now I believe.
Craig
Edited by: Craig Snyder on May 20, 2008 11:57 PM -
I don't understand what's happening with my Music. All the songs that I purchased, that were previously on my phone, now show up with a Cloud next to them, but I can't play them. If I touch the Cloud, it turns into a red square, acts like it's downloading (which I can see happening in iTunes), but never downloads. The Cloud just stays there.
I've sync'd my phone, I've turned it to "show all music" in Settings, I've drag and dropped the songs/albums onto my phone again. I feel like I've tried everything I've seen recommended, but nothing works.
I've purchased a lot of music from iTunes. It should be there. What's going on?
P.S. Same thing happening with my purchased books. Ugh.Once you successfully add you iTunes library to iTunes Match, you go to Settings>iTunes & App Store on your iOS device and turn on iTunes Match. Your iTunes Match library will then appear on your iOS device.
-
I just bought my macbook pro and it's charged up to 100% and is still plugged in but now shows the battery at 98%. How is this possible when it's plugged in to the charger and the green light is on?
The system regularly lets the battery drop to about 95% when on the charger, then recharges to 100%. This lets the batery exercise "just a little" all of the time and saves the recharge curcuits from overuse.
Regualr occurence for me.
Also ... you need to let your battery work at least once per month. Let it run down to 40%, but not less if you can at all avoid it. Running thr battery fully dead will shorten the battery life significantly. -
How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can doHow to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do -
Sales Order is cancelled but still 1 sales oder item is showing in MD04
Hi,
I have created one Sales Order. Due to some reasons i have cancelled that sales order. Out of 5 sales order items 1 item is still showing in MD04.
I dont understand what has happened.
Please guide me on the same.
Regards,
AmitHi,
Try to run report SDRQCR21 and have look at sap note 25444
You run the report in transaction SE38.
This should normally be done by your consultant
You can display a SAP note at http://service.sap.com/notes but you need a user and a password.
Regards,
Sankaran -
I have used the same Apple ID on my children's iPads. Both iPads are now showing as the same. How do I get the missing account back?
You can clear the iPad and start again with the other account> Settings->General->Reset->Erase all Content & Settings
Or you can go to Settings->Itunes and App Stores->Apple ID->Sign Out,
And Then Sign in with the other account. You can then download the Apps with that account. Though you may block the other account for 90 days.
Your best bet is to set it up again using the orighinal account it had, so you can get their Apps back. without affecting your account. -
For years I have been using [email protected] for business.
It is on my business cards, stationary and most of my closest correspondences are maintained off of that email.
The documentation I've read indicates aliases should be transferred over as part of this iCloud migration but this does not seem to be the case. My account now shows 3of3 aliases available but I'm still able to receive messages addressed to the alias. I can no longer send emails from this alias.
How do I get this corrected?
Ali,
[email protected]
A.K.A
[email protected]Workable solution found here:
https://discussions.apple.com/thread/1589996?start=15&tstart=0 -
I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?
The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD -
while updating my iphone software it got intruppted and now showing connect to itune not getting restored please help
Try doing a hard reset on the phone;
1. Hold Home and Sleep/Wake buttons at the same time;
2. Wait for the Apple logo to appear (ignore the slide to Power Off option)
3. Let go of the buttons when you see Apple on the screen
4. Allow iPhone to reboot;
If you are still unable to get the phone to power on, charge, or connect to iTunes; it could possibly require service. (hardware replacement) -
Ipod has been reformatted and now shows up as a removable disk drive any he
I-pod has been reformatted and now shows up in windows as a removable disk drive can not get updater to recognize. any help?
Wow...I never thought there would ever be such a screwy problem like this on such a large scale....has anyone noticed how many similar posts have been posted in the last week or so? Not saying this never happens to anyone--in fact, it's happened to me beofre, but it was simple to fix...but the same problem happening with so many people at about the same time*...I don't know, it's kind of strange...anyway....
Yeah, I'm a Mac/Apple guy to the core, and have been since 7th grade (about 11-12 years now). Yet, I can't help but look at my iPod as if it has self-destructed. I was listening to it (w/ tape adapter, of course) on the way home in the car, then unplugged it for literally five minutes, got into my apartment, plugged it in my dell Latitude, and poof it had been reformatted. So, the moment I plugged it in, its funcionality basically vanished. The 5 R's have been useless thus far, and I can't even reformat using Explorer, because Windows tells me that the 1 GB iPod now has no storage capacity. ***? Strange, strange. Anyhow, sorry for the rambling, but this really confounds and frustrates me. APPLE....HELP US PLEASE!
*Don't get me wrong: I'm not a conspiracy nut; it's just hard to wrap my mind around this right now. -
My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this?
a friend told me that he wants my os x cd for my macbook pro to upgrade his imac.
The discs that come with your Mac are "machine specfic" and cannot be used on another Mac.
Maybe you are looking for
-
Installation problem on new macbook pro i7 How do I get a DMG or firefox icon on desktop?
I can't see anything but the name label on the DMG file. The blue dialogue box only has the applications folder in it. I tried installing both 3.6 and 4 beta versions with the same result.
-
Is there any way of saving progress in a game/app when you remove it from the ipad to the cloud
Is there any way of saving progress in a game/app when you remove it from the ipad to the cloud. Basically i have a 16gb ipad2 (big mistake) so space on the ipad is precious. obviously i occasionally need to remove games/apps to make way for other a
-
Audio problems sharing iphoto slideshow with iDVD
I have created a slideshow of 200 photos and 4 random tracks from itunes. It plays fine in iphoto. When I share it with iDVD and a .mov file is created only the first Track of audio plays both in preview and from a disk image. The rest is silence. Th
-
How to disable -xarch warning?
If I compile with -xarch=native, I get: CC: Warning: -xarch=native has been explicitly specified, or implicitly specified by a macro option, -xarch=native on this architecture implies -xarch=sparcvis2 which generates code that does not run on pre Ult
-
Get Query value Technical Name
Hi, I have ZANALYSIS template and different queries use this template, I have to show a link to download a document. The document will be stored as Query Techincal Name.DOC. So i need to get QUERY techincal name in runtime to build path, how can i ge