Stock of material and moving average price for each valuation type

Hi
Is anybody aware of any standard report which will show the stock of material and moving average price of the material for each valuation type.
M5BL is one report but would like to check if there is any other report.
Regards
Vaibhav Mahajan

Hi,
Check MB52, select 'Display batch stock' option.
Batch is nothing but your valuation type.
You can see those details there.
Regards,
Piyush

Similar Messages

Moving Average Price for Non-Valuated Material

Hello Experts
The question may seem to be quirky but need your advice for the below.
My client is buying non-valuated material against a cost center, they do not want to keep the stocks valuated. No value update only quantity update. The accounting documents are the following when the GR is done by receiving folks
Qty of material XYZ goods receipted = 10
Debit     Consumption GL   12345678       10 USD          Cost Center ABC123 (This is a warehouse cost center)
Credit    GR/IR account                            10 USD
Qty of mateiral XYZ issued = 5
The goods are later on issued to Production cost center and the client was the below entries to be passed with MOVING AVERAGE PRICE.
Debit    Consumption GL 12345678           6 USD          Cost Center ABC456 (This is production Cost center)
Credit   Consumption GL 12345678           6 USD          Cost Center ABC123 (This is warehouse cost center)
I am aware that as this is a non valuated material the above entry is not possible. Maybe, I will use BAPI_ACC_DOCUMENT_POST for the generating the accounting document when the goods are issued from warehosue to production center.
My question is how can i get the moving average price.
Regards
Chokkalingam Pillai

you can have an accounting view for non-valuated materials, this helps for example with purchase requisitions as they could take the valuation price from the material master and the user does not need to enter a valuation manually.
But the material master moving average price cannot be calculated and updated automatically, as it is not foreseen in any standard program to do this for cost center procurement, since SAP only calculates a MAP for valuated stocks.
Further it is not logical to issue non-valuated stock valuated (even with a different price) from cost center to cost center.
It looks like you want to have a kind of internal billing for warehouse services, as you end up with a negative amount in the warehouse cost center which is then the profit.
Why don't you just create a report to run at the end of the month, listing all goods issue movements with their cost centers and taking the price from last PO (or from material master if you decide to maintain it manually) and use this for a manual cost center posting in CO module

Moving average price based on valuation type for material

Gurus help needed.
we want to maintain the moving average price of the material in the pricing, and this depends on the Valuation Type. We have 3 valuation types.
If valuation type is blank then one MAP(Moving average price) value will come and if nn one map will come and for nn one map will come.
We have copied VPRS conditon type to YVRP and changed conditon category as T( Moving cost).
But in pricing the YVRP price is not picking from valuation type which is blank.
Where can i make the settings to tell the system to pick the moving average price from the material master where the valution type is blank always based on the condition.
Do we need to creat a routine? If so is there any standard routine which we can use or make minor changes to it?
If it is a new routine please tell me how to start with VOFM?
Note : We need the value to come automatically from material master same as VPRS.

Hi
The first method is not to set the pricing condition VPRS as statistical.
Simply remove PR00 and it will work fine if you always use VPRS as your pricing base inside the pricing procedure.
VPRS will reads both prices based on the price control in the material master.
Price control S for standard price.
Price control T for moving average price.
It is this simple if you do not have any other "Prices" in the price procedure.
However, if you are using one pricing procedure where for some items you price using VPRS and some others using PR00, then you should use requirement routines to enable the correct price condition type at the right time.
The second method involves more work as you need to write a formula (VOFM) to get that information.
This is how it goes :-
1. Set VPRS to be the first step in the pricing procedure and to be subtotal B (as standard).
2. Set PR00 with alt. calc. type formula, which sets the value of PR00 to be equal to the subtotal B.
Step 1 VPRS statistical, subtotal B, reqt 4
Step 2 PR00 Altcty 600
With regards
baalakrushnan.da

Separate Moving Average prices for Same Material

HI All,
My client wants to maintain moving average price separately by shipment wise. In this scenario same material for same plant might have different moving average prices for each shipment. Is it possible with standard SAP system or how is it map in to System?
Thank you & Best Regards
Sameera

Duplicate thread already same question raised refer below link,
[Re: Separate Moving Average prices for Same Material]

Moving Average Price for Batch Maintenance

Hi Experts,
      I've created material of which stock is maintain in batch (Valuation category = X & Price Control = V).
    Due to batch wise stock, system calculates the moving average price for different batches.
    Can we calculate moving average price at plant level inspite of maintaining material batch wise?
   Is there any other way by defining multiple storage bins for that material so that I can see the stock value differently with single moving average price value?
   Thanks.
                                               Naimish.

In MM03, you get the overall MAP for all batches of the material at plant level without mentioning valuation type in org. level. When specific valuation type is given, you can see its MAP / std price.
Hope this clears the doubt.
Regards,
SAmeer

Updating Material Master Moving Average Price using BAPI

Hi,
We need to create a program using which we can update material master moving average price for a specific material.
For this we are using BAPI_MATERIAL_SAVEDATA.
when we are executing this bapi with inputs, it is showing data updated or created but when we are checking it in MAterial Master the data (MOving Price ) is not getting updated.
Please advise,
Thanks.

I am trying to use BAPI_MATVAL_PRICE_CHANGE to change the price of a material in material master
(The moving average price [MAP] in Accounting View 1)
Using the BAPI, I enter
--> RFC target are
-> Material No.
-> Valuation Area
--> Prices table (I enter the new price that i want)
when I run the BAPI, i get error message (This can be seen in the returns table)
ID --> CKMLSENDPRICE
MESSAGE NUMBER --> 701
DETAILS --> No customizing data for Valuation Area XXXX found
PLease advise.

Moving Average Price for Sales stock and Project stock of a material

Hiya Gurus,
                 I am developing a report to display inventory details. My requirement is that I have to display the Moving average price of a material for all Valuation type. I also need to display the Moving average price if a material has got Project stock or Sales stock.
                 In MBEW table I can get the Valuation type and its Moving average price, but how can I find the moving average price for the same material if it has got Sales stock and project stock. Please let me know the table and field where I could get the relevant data.
                Kindly help me on this, it would be deeply appreciated.
Cheers,
ZIa

Hi
can you look at tables
EBEW                             Sales Order Stock Valuation
QBEW                             Project Stock Valuation
Nat

Negative stock ('moving average price for material is negative')

Dear all,
I have a question with regards to negative stock.
Does it means if I configure my system (i.e. OMJ1) by allowing the negative stock for a particular plant, the problem of Invoice bumping the error (i.e. 'moving average price for material is negative') WILL NOT happen at all again?
If not, how can I solve this problem?
thanks.
tuffy

Hi,
As Jürgen said price can't be negative. You need to correct MAP first before posting the invoice. Try running consistency check (Tcode: MB5K) you might know the reason why system is showing -ve moving average price and then you can correct.
Regards,
Rakesh

Moving average Price for Material is Negative

HI Friends,
I am doing MIRO for PO where its giving me error while posting the Invoice that
Moving average price for material is negative
Can any please help me to resolve this.
what would be the implications if the price difference is too high b/w MAP in Invoice .
Thnaks
Purna Nalluri

It is ofcourse bcoz there is price difference in the between PO and IR....
so as per the calculations the MAP becomes negative....
The formula for it is :
Difference/Current stock holding + current moving average...
Pls check you price entered at PO and IR....
There are no any implecations...excepts the price differece is reflected in the MAP of MMR....
hope it helps...
Regards
Priyanka.P
Edited by: Priyanka Paltanwale on Sep 23, 2008 7:28 AM

Error in MIRO - Moving Average price for the Material is negative?

Hi,
While doing Invoicing, the following error is coming:
Moving average price for material is negative: 13070106001 1000 NEW
Message no. M8783
Please note that all the Material Qty has been sold out
Please help.
Regards,

Hi,
Still, I am not able to get the Solution.
The actual problem is that at the time of PO creation, we entered ADC value as 106.350,70 USD (which was actually 106.350,70 INR).
MIGO - FI Document
Local Tradeable Good     94.000,00
GR/IR-clearing - ext     54.000,00-
ADC Clearing     106.350,70-
ADC recoverable     106.350,70
Clearing Charges A/C     40.000,00-
FI Document on simulation
SILINK HOLDINGS LIMITED /      106.351,00-
ADC Clearing     5.237.771,98
Additional Duty     2.252.693,81-
Price dif. Gain - Trading     2.878.727,17-
Now we are doing MIRO for 106.350,70 INR and the System is giving the following error:
Moving average price for material is negative: 13070106001 1000 NEW
Message no. M8783
Current Stock Status:
Total Stock          4.390
Total Value          929.695,90
Moving price         211,78
Price Control        V
Please help!
Regards,

'Moving average price for material is negative' calculation

Hi Gurus,
I would like to ask for your assistance regarding Invoice having error of 'moving average price for material is negative'.
How is it being calculated that it goes to negative value? Can you also please give a scenario on why it became negative?
We have the following scenario:
MAP: 0.30
Total Stock: 9
Total Value: 2.74
PO raised and GR was done:
Quantity: 240
Value: 2.95
Would appreciate your assistance on issue.
Thank you.
Jih

Hi,
Please check that price of that material is increased or decreased by using transction MR21. after GRN.
You posted a valuated goods receipt for a purchasing document for a material with moving average price control.When the invoice was posted (invoice item with price variance for goods receipt), the system generates error message M8783: 'Moving average price for material & & & is negative'.
Between the posting of the original goods receipt and the entry of the invoice, the system already posted additional valuation-relevant transactions/events (goods movements, invoices and so on, can be displayed with Transaction MR51).
The invoice verification tries (for stock coverage) to credit/subsequently debit the difference between the value of goods received and invoice item value for the stock.However, the material total value must not become negative by this stock posting.
Solution
Before you post the invoice, you must first increase the stock value.
The amount by which the stock value must be increased at least can be calculated from the following values:
1. Transaction MM03, accounting view material master, field 'Total value' (MBEW-SALK3)
2. Invoice item value according to invoice
3. In the invoice verification (Transaction MR01, MR1M, MIRO), change the invoice item amount to a value which is high enough and simulate the invoice to receive the value which would be posted for this item to the GR/IR account.
In the invoice verification, the value (3) minus (2) is posted to stock. It must be larger than (1).Post a subsequent debit with the amount (3) + (1) - (2) for the affected material/plant (Transaction MR22).
You can post the invoice afterwards.
Regards.
Edited by: Sachin on Sep 24, 2009 9:11 AM
Edited by: Sachin on Sep 24, 2009 9:13 AM

Moving average price for material is negative: M8 783 while credit memo/MR8M

Hi,
We receive an error message :M8 783- "Moving average price for material is negative". This is while we do a credit memo or MR8M.
This is the screens shot of MB51:
Below is the PO history for the material in question:
While cancelling the IR above, the error message apperas as "Moving average price for material in plant is negative".
Not really clear how this situation should be handled.
The MAP of this material has not changed.. Its 500$.
Read the oss notes as well, but would like to get some response from the forum to proceed.
Regards,
Shilpa

Hi Jurgen,
MR51 for Material-Co.code- Valuation area shows "No accounting documents found".
Below is the screen shot of S_P00_07000139:
Current stock level is 8 BG and total stock value is $4000.
Hope this helps you give me more abswers.
Regards,
Shilpa

MIRO : Moving average price for material is negative

Hi,
i post an invoice but the system gives me this message : "Moving average price for material is negative: 120462 M411"
i tried to change the average price (MR21) but really it is not a solution.
is there any other solution to post this invoice?
Regards
Edited by: jehade el aoumari on Oct 22, 2008 2:06 PM

Moving average price negative error comes when the correction in price of material made in MIRO is more than its moving average price in material master. There are three ways to solve this error,
MR21 as you said, or
Reverse all previous transactions like GR in the sequence they were made, amend the PO and make fresh GR. or if this is not possible,
Complete the MIRO with wrong amounts and pass FI jv to rectify the wrong FI impact....
Hope this helps you..

Moving average price for the material is negative

Dear ALL,
While doing the MIRO (invoice posting), one of the user getting this error "Moving average price for material is negative :CWM006070c73 CHE1"
Any one help on this,
It is stop the production .
Regards,
Murthy.

Hello,
please check your PO whether net price is in negative or not and also check ur matyerial master
Thanks,

Moving average price for material is negative while MR11.

Hi
Encountered "Moving average price for material is negative" error while performed MR11 transcation.
GR alerady done but not IR. Few months later, now GR/IR clearance having this issue.
I could found the material price is being revised (price reduced from earlier GR time).
Now while performing one time clearance though MR11 (there wouldn't be any IR posting in P.O) having this error.
Appreciated if any one can advise in steps how to clear.
Thanks
RG

Hi,
You should define the GR/IR clearing mantenance which will not update the material stock account! Had better assign another G/L acccount (non-material stock account) to GR/IR clearing!
Good luck
Tao

Stock of material and moving average price for each valuation type

Similar Messages

Maybe you are looking for