Stock on Hand at External finisher is not getting reduced after shipment !
hello all,
would like to take help from the oracle retail experts and friends to know
1. why does the SOH is not getting reduced at external finisher level when we are moving stocks from External finisher to Warehouse .
2. Due to this i hope there is an impact on avgerage cost when we execute the process from the same EF (where some SOH are available ) to Wh .
your thoughts and opinions on the same is high invaluable .
regards,
Deepak
hi
when your are making production it must come to project stock
in the item category (tan) or other you want to mention as q as special stock
that time only the stock will reduce after you are doing the pgi
Regards
Raj
Similar Messages
-
Lacie Rugged external drive will not show up after Yosemite update.
Lacie Rugged external drive will not show up after Yosemite update. It show up in disc utility I can't access it.
I have the exact same issue. Have you had any luck with a solution?
-
Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Note: This is now your Library. It's not a Back Up, and you need another disk for backing up.
Regards
TD -
Screen fields not getting displayed after Line 16
Hi All,
There is a screen exit created in IW51, now the new requirment is to add 3 more fields. I added the fields below the exiting fields, in line number 15 , 16 &17. After executing the Tcode I could find that the field created in line 17 is not getting displayed in runtime. I have increased the screen length. The fields if moved to line numbers below 16 then they are getting displayed. Can anyone help me to find why it is not getting displayed after line 16.Hi,
Can you give me the Enhancement name?
I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode? -
Sale order commitment amount not getting reduced
Dear Experts
Once the Sale order is created the SO committment amount gets updated in reports (commitment Vs Actual report) with"Forecast of Revenue" and Amount type 0100 (Original).
But after creation of Billing document (actuals) the same 'Forecast of Revenue' (commitment amount ) is not getting reduced with Amount type (0200). FM document is generated at the time of Billing document generation and the same is showing in reports from Invoice side.
The same cycle is happening in MM i.e, once PR/PO commitment will get reduced after actuals were happened.
Ex:
Ref doc Item Val.type text Amt type Payment bdgt
100000 10 Forecast of Revenue 0100 100
20000 2 Invoices 0100 100
Why SO commitment is not getting reduced in SD module?. Because of this reports are showing wrong.
Kindly suggest.
Thanks in advance
RaoDear Mar
Thanks for the support and tried all the possible ways but not able to find out the reaon:
a. FM Accounts assignments (CI, FC,Fund and BP) are same both Sale order and Billing documents.
b. There is no exits are activated.
c. It is happening all the sale orders and the reduction is completly missing.
d. For your reference please find the below commitment and Actuals report (FMRP_RFFMTO10X ).
Ref doc Val.type text Amount type CI FC Amount
100107 Forecast of Revenue 0100 100 ABC 100
256487 Invoices 0100 100 ABC 100
Because of this when we check budget report the consumed amount is showing Rs. 200/-
e. And also we don't have any PGI concept, only after Sale order creation direct billing document will be generated.
Kindly suggest is there any configuration missing issue or something else.
Regarads
Rao -
Production Reporting out put not getting deleted after 30mins what we set.
Hi,
This issue regarding Production Reporting. In the workspace the report output not getting deleted after 30minutes (while publishing the report settings were like delete after 30 mins). Any suggestions please .....
Thanks
VenkatHi Deepak,
Please chek the field / value which u have changed is relavant to printouts of the change.
You can check with following path
SPRO> MM > Purchasing > Message > Fields Relevant to Printouts of Changes.
Confirm tick is provided for PO ( P)
Vivek -
"disp+work" process in not getting started after kernel upgradation
Hello Experts,
Good day…..,
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
I have posted “dev_W0” log &
“disp+work” command result obtained in CMD prompt of respective server.
Please help me out in this. Thanks all in advance.
“dev_w0” Log”
trc file: "dev_w0", trc level: 1, release: "741"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 55
M sid TNG
M systemid 562 (PC with Windows NT)
M relno 7410
M patchlevel 0
M patchno 42
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
M pid 2392
M
M
M Wed Jul 23 02:04:35 2014
M kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
M length of sys_adm_ext is 500 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
M DpCommonParamInit: rdisp/core_file_size = default --> no change
I MtxInit: 30000 0 0
M
M Wed Jul 23 02:04:36 2014
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: alloate/attach shared memory (mode=ATTACH)
M DpShMCreate: sizeof(wp_adm) 24288 (1104)
M DpShMCreate: sizeof(tm_adm) 51472080 (256080)
M DpShMCreate: sizeof(ca_adm) 432000 (72)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
M DpShMCreate: sizeof(comm_adm) 7583152 (14904)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
M DpShMCreate: sizeof(sock_adm) 520080 (1016)
M DpShMCreate: sizeof(vmc_adm) 0 (3208)
M DpShMCreate: sizeof(wall_adm) (ft=41664/fi=67472/hd=64/rec=192)
M DpShMCreate: sizeof(amc_rec_adm) (ft=86464/fi=67472/hd=64/rec=416)
M DpShMCreate: sizeof(websocket_adm) (ft=28864/hd=64/rec=272)
M DpShMCreate: sizeof(gw_adm) 64
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000103D0050, size: 60433936
M DpShMCreate: allocated sys_adm at 00000000103D0250
M DpShMCreate: allocated wp_adm_list at 00000000103E20F0
M DpShMCreate: allocated wp_adm at 00000000103E2410
M DpShMCreate: allocated tm_adm_list at 00000000103E84F0
M DpShMCreate: allocated tm_adm at 00000000103E8730
M DpShMCreate: allocated ca_adm at 00000000134FF000
M DpShMCreate: allocated comm_adm at 0000000013568980
M DpShMCreate: system runs without slock table
M DpShMCreate: allocated sock_adm at 0000000013CA4130
M DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
M DpShMCreate: system runs without VMC
M DpShMCreate: allocated gw_adm at 0000000013D23560
M DpShMCreate: allocated j2ee_adm at 0000000013D237A0
M DpShMCreate: allocated ca_info at 0000000013D24900
M DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
M DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
M DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
M DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
M DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
M DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
M DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
M DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
M DpShMCreate: initialized 21 eyes
M DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
M DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use Semphore 33 for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X
X Wed Jul 23 02:04:37 2014
X mm.dump: set maximum dump mem to 96 MB
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Wed Jul 23 02:04:44 2014
M ThInit: running on host ABTHMSSB01
I MtxInit: 0 0 0
M
M Wed Jul 23 02:04:45 2014
M calling db_connect ...
B Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
C Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
C Register application info.
C
C Wed Jul 23 02:04:47 2014
C Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
C Detailed Oracle client (patch) info not available.
C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c 2406]
C Only Secure Connect method possible.
M ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c 2281]
M Wed Jul 23 02:04:48 2014
M
M Info for wp 0
M
M pid = 2392
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M workerType = DP_WORKER_DIAWP
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M report = > <
M action = 0
M tab_name = > <
M
M ThIErrHandle: no current incoming request
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Jul 23 02:04:48 2014
M * RELEASE 741
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 16797709
M * MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
M * LINE 2470
M * COUNTER 1
M *
M *****************************************************************************
M
M PfRejectStatistic: clear statistic record
M PfClearAllRec: clear statistic area
M PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
M Entering TH_CALLHOOKS
M ThCallHooks: call hooks for event BEFORE_DUMP
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
“Desp+Work” Command result:
C:\Users\tngadm>disp+work
disp+work information
kernel release 741
kernel make variant 741_REL
compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
compiled for 64 BIT
compilation mode UNICODE
compile time Jul 9 2014 16:39:46
update level 0
patch number 42
source id 0.042
RKS compatibility level 0
supported environment
database (SAP, table SVERS) 700
710
701
702
703
711
720
730
731
732
738
740
operating system
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
Windows NT 6.2
Windows NT 6.3
C:\Users\tngC *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c 2406]
C Only Secure Connect method possible.
For this issue you need to set up SSFS.
1639578 - SSFS as password storage for primary database connect
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741
Are you sure kernel 741 is compatible with an EHP 4 system ?
Read this SAP note
1969546 - Release Roadmap Kernel 740
Regards
RB -
Can not get email after updating to 8.1.1! Deleted account and now cannot add as will not verify due to Apple something timeout messages? Any one else having problems?
Hi tania184,
Have you contacted your email provider to make sure there are no problems on their end? If they say their email servers are working properly, check the outgoing and incoming mail servers entries on your iPhone to make sure both are entered correctly. Enter the outgoing mail server even if the account setup indicates that is optional. -
my ipod touch is not getting recognised after the update in my itunes library. i have updated my library as well. but it shows the connect to itunes sign on my ipod.
If it happened after updating iTunes on the computer see:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
If after updating the iOS on your iPod:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Ipod Touch not getting detected after IOS upgrade.
I have recently upgraded the firmware of my Ipod Touch (1G) to IOS 3.0.1 and was successful in upgrading.
The issue i am facing is that my ipod touch is not getting detected after reconnecting and the ipod touch is not getting switched on...it is just showing the apple symbol and the progress bar.
Please let me know if anyone has faced similar type of issue.
Please also let me know the resolution for this.Are you using a USB hub? Try connecting the iphone directly to the computer's USB port and see if that makes a difference.
Also, with the upgrade, this seems to happen a lot. Most of the time if it is not the USB issue above, it can be resolved by simply redownloading Itunes and installing it on top of your current installation. -
Can not get microphone after privacy on ipad 2 on upgrade iOS 702 . What can i doe ? Thans
The above helped me find this solution:
do the following steps:
General > Restrictions > [scroll down to ] PRIVACY: > Microphone > Allow changes
Not: Settings > Privacy > Microphone
If you are installing an app like Soundhound, you will have to delete it then just reinstall it. The app then will ask you if it is "OK" to use the microphone. Push "yes". Then go back to the Settings app and follow the chain:
Settings > Privacy > Microphone > SoundHound push tab to the right until it turns green and you are set. -
Macbook pro storage do not get smaller after cleaning up photos in new photos app
Macbook pro storage do not get smaller after cleaning up photos in new photos app.
How can I delete photos? are they hidden somwhere?Yes, trash is empty. And in photos libary I only have 1800 items. Also I havent got so much movies.
-
Reports not getting posted after webserver bounce.
Hi Gurus,
The reports are not getting posted after the webserver bounce occurred. This is the same webserver on which report repository is located.
However if we boot this webserver first and run a report, then it gets posted. And then after all the other webservers are booted, then the issue does not occur.
Please advise.
ThanksSounds a bit like the problem described in this Oracle Solution: ID 660253.1?
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=PROBLEM&id=660253.1 -
How to calculate stock on hand initial based on VALUATED not Category group
Dear Expert,
Now, i want run SNP with initial stock on hand calculated by stock on hand based on VALUATED not category group like CC or CI. Because in ECC we used a lot of valuation types for materials.
please show us.
thanks so much
hungthHi,
1) You need to answer the question whether you really need this 200 quantity in APO or not? Is your requirement only relevant to SNP? Or that even for GATP, PPDS, etc you don't want to get this 200 stock in APO. If you don't want this 200 quantity in APO at all, then what I said earlier would be applicable. You could try to have enhancement in CIF so that valuation type AKDTCLT1(200 quantity) gets exluded in CIF and doesn't reach APO. I am not really sure how simple or complex this could be, but most likely should be possible.
2) Once the stock is in APO, are you able to distinguish between the 2 stocks in anyway? As far as I know, it won't be possible to distinguish. You could see the version (batch from R/3), and the stock category. I am not sure if valuation type info would be available in any way in APO, but may be I am wrong. Even if you were somehow linking the stock valuation type to the storage location stock, I think only possibility for your would have been to block storage location specific stock to come to APO in CIF (for ALL storage locations), but the stock at Plant level would still come to APO.
If somehow you are able to distinguish the stock based on valuation type, then Ada's solution could be used.
Thanks - Pawan -
Stock not getting updated after confirmation of order
dear all
In our scenario x is final product.x1( semifinished),x2(spare) are dependent materials for final product. x1 has bom r1 and r2 (raw materials).I put all x1,x2,r1,r2 stock available in storage.
To get final product , only final assy of above materials by labour.PIR (md61) created for x and planning run.After planning run, planned order generated for x and converted in to production order and released.
My requirement is on confirmation of production order, backflushing of dependent materials as per bom should be done.
On confirmation of order in co15,saved.But, stock is not getting updated.what might be the reason? please give me some solutionHi
1.Set the Back Flush Indicator in your Material Master for the components. ( You can do this in Work center and Production Order too )
2. You can also set the flag for the field " All Components" in Order Confirmation Parameters (OPK4).
3. If you want to post the Fert also at the time of confirmation use the Control Key which has " Auto GR" enabled.
While confirming the Order press the Button "Goods Movement" to ensure that the components are present there for the movement.
Regards
Krishna
Regards
Krishna
Maybe you are looking for
-
on my macbook pro when opening a page on safaryi can not save it as a pdf only give me the option of saving it as a web page can any body help me on this I have tryed so many times without success?
-
I have different icloud accounts can I link them
Can I link more than one Icloud account to one device
-
Variable values in navigation blok
Hi WAD Experts, I'm trying to pass variable values to the navigation block. I have already set my variable as ''Changeable at Query Navigation' but it's not working. The chosen values not appear. Any ideas? I'm on a Bw 3.5 version. Thank you. Ste
-
Storing multiple Sine waves in one LVM
Hi all, actually i got a very short question. I can't believe that i'm unable to fix the problem by my own... But that's the way it's suppose to be I think. The question: Just a simple Sine wave in a while loop, connected to a graph. When I run it i
-
Making field mandatory dynamically
HI, Can anybody send sample code for following logic? i am having three fields as select options. consider BSART BUKRS EBELN In selection screen if BUKRS is initial, I want to change EBELN as mandatory. else if BUKRS is not initial, EBELN is not man