Stock placement into multiple bins

hi,
  i configured my put away and stock removal strategy as manual , so end user entering bins  in TO, where i need to put stock into different bins like, if i receive 50 items means it should be placed into two bins 25 -25. if i try to give in the TO table it wont allowed me.(throwing error:Total of scheduled quantities exceeds quantity to be placed into storage)but i give that exact quantity only. any configuration i have to give.
Thanks
Muthruaman.D

Hi Muthuraman,
Could you please check the configuration for the storage type definition. In storage type definition please check the configuration for addition to stock if it is blank it doesn't allow stock to be put in the bin in that storage type.
Kindly check and confirm
Best Regards
Sasibhushan

Similar Messages

  • Stock placement in multiple bins

    hi,
    i configured my put away and stock removal strategy as manual , so end user entering bins in TO, where i need to put stock into different bins like, if i receive 50 items means it should be placed into two bins 25 -25. if i try to give in the TO table it wont allowed me.(throwing error:Total of scheduled quantities exceeds quantity to be placed into storage)but i give that exact quantity only. any configuration i have to give.( i maintained palletization inmaterial master also).
    Thanks
    Muthruaman.D

    Hi,
    Check on it:-
    http://www.sapfans.com/forums/viewtopic.php?f=6&t=76479
    http://help.sap.com/saphelp_40b/helpdata/EN/c6/f844694afa11d182b90000e829fbfe/content.htm
    pherasath

  • SAP WM -Stock Placement-Near Picking bin

    Hi
    Two quries
    The scenario  is -On receipt of stock need to first fill the Fixed bin in the Fixed storage type and if the capacity reached max in the fixed bin then the reserve bins in the reserve storage types are to be filled.
    (1) I trying using Stock placement strategy for fixed storage type as "F" (fixed bin ) and in the reserve storage types as "K" (near picking bin).Defined Storage type search sequence first fixed and next reserve storage type.In the Near picking bin stock placement strategy activation expect "Search width per level" and "Assign shelves to the aisiles" all  other configuraion are done.
    Pls tell me the impact of using these two steps in detail. (a) Search width per level(b) Assign shelves to the aisiles .Is it mandatory to use this two steps for the near picking bin strategy .
    (2) Is their any other solutions can be followed for the above said scenario.
    help me to solve these quries
    Regards
    Kumar

    Hi Aktar
    We maintained
    Stoarge Type Stock palcment Strategy:Addition to exsisting Stock
    SUT Active,SU Active ,Addition to exsisting stock Active
    In Mixed stoarge :Mixed Storage Not Allowed.
    (Mixed stoarage Type Indicator "A" is not allowed when we are using stock palcement startegy as 'Addition to exsisting stock").
    Material we are not tracking by batch number ,but SLED will be maintained at the time of receipt.
    When we receive  New stock ,system  is adding to the BIN which already has the same Material ,System is adding the new stock to the exsisting SU Number(Not creating the New SU Number) and SLED information even though different for the Incoming New stock ,system over writes with the exsisting stock SLED.
    Pls help ,how to solve this
    Regards
    Kumar

  • Place materail into multiple bins in a single TO

    Dear Friends,
    I have a requirement.
    Suppose there is a stock of 100 Tonnes of material X  available in 902 stoage type.
    Now we need to create a new transfer order manually from the transaction LT01.The souce bin is 902 storage type and in the destination storage type, the material of 100 Tonnes has to be distributed into three different bins.
    I tried LT04, this will work, but with refernce to the Transfer requirement #, but in our case there is no open Transfer Requirement.
    Kindly suggest suitable solutions for this.waiting for your feedback.
    Regards,

    Hi Guys,
    Who can explain what causese interim storage type to have negative quantities?
    Who can exlpain what is the best way to clear storage type 902?
    Thanks
    Silas

  • How To Place/Open Multiple Images Into Separate Layers For ONE Document?

    I've been searching for the answer for a long time so I figured that someone here has to know.  I have PS Elements 9. 
    So I would like to make GIFs and I know how to do so, the problem is placing in those tens of files in layers (it's tedious).  Is there a way to select multiple image files to place into a single document?  And for them to be place into its own layer?  I've tried dragging and selecting from the Open/Place menus (won't allow), SHIFT + Direction Key from the Open/Place menus (won't allow), tried opening them to drag on the Organizer and to drag from the Project Bin (again won't allow), and I've read tutorials where they say to use scripts and actions but I'm not sure what to download them in order for them to work and the links are broken anyway.
    An example of what I'd like to do:
    Open and place in 15+ screenshots into layers but in just one document.
    Each screenshot would be one layer in said document.
    ...rest of GIF process...
    I feel like there's an easier way to get this without placing in each one at a time.  I remember being able to do this on a old PS (though not Elements).  Thanks for any help.

    The quickest method is probably opening all images together from Full Edit:
    File >> Open
    Then navigate to the folder and use shift+click to select a block of files.
    The images will appear in the photo bin. Drag and drop each one into the main editing window and a separate layer will be created for each.

  • "Place into Photoshop" with multiple files

    I'd love to see this feature in Bridge
    Import multiple files into an existing photoshop file (with a predetermined size ) as smart object layers in photoshop.
    The options that Bridge currently offers falls short in 2 area
    Load Files into Photoshop Layers-- does not import smart objects and creates a new photoshop file that ends up being as large as the largest imported file
    Place into Photoshop--only lets you do one at a time
    I need "Place into Photoshop" with multiple files
    Is there a way to do this?
    Thanks!!

    I agree, placing multiple files into your PSD as smart objects all at once like InDesign would be a great (and logical) feature for Photoshop to have. The only "workaround" I have is to create a shortcut using Ctrt+Alt+Shift+D (which is not used by anything), so you can place pictures/graphics more quickly, rather than using the menu each time.

  • How do I place a multiple page .pdf file into a new InDesign CC document?

    How do I place a multiple page .pdf file into a new InDesign CC document???

    You will likely get better program help in a program forum InDesign
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • User Exit for Stock Placement for Next Empty Bin Strategy

    Hi Techi's
    I have got one requirment for stock placement in Warehouse Managment as below:
    If client uses the standared strategy for putting stock in Storage Bin as "Addition to Stock" Then the self life of the coming material is being replaced by the existing material's seft life.
    And if they use the "Next Empty Bin" strategy then the obove issue is not coming but system always searches for the full empty bin only thus wastage of the existing bin's which already has some space.
    Now what my client wants is that to use the "Next Empty Bin Strategy" so that self life is not being overwritten but along with system should not search the complete empty bin for placing the stock rather it should search the bin's which already has some space then later move to the empty bin's.
    In summary its a mixture of "Addition to Stock and Next Empty Bin" Strategy.
    Please suggest me the Exit for this if available or tell me the code if already has implemented it. Friends its going very hot.
    Please please help me.
    Thanks in Advance.
    -=Maddu=-

    Hi All,
    Please help me for this. I am heavyily stuck on this.

  • Stock Placement during Return Delivery in Ware house

    Hi All,
    We have a scenario where client while returning the material to ware house want to place it in different bin. Currently the process is carried out through LT0G but here system is proposing the destination bin (original bin) as the same bin from where the batch stock is picked. Now due to some unavoidable reason before PGI user wants to unload the batch stock and place is it different bin. For this purpose currently we are first confirming the Transfer order created for return of batch stock to original bin and again creating a new TO to place the material from original bin to new destination bin. how can we avaiod cration of this extra Transfer order.
    BR
    Mukesh

    LT0G provides the option to place the stock in a different bin than it came from, this is even he usual way in our warehouses since the bin where the material was picked from is again occupied by other stock.
    The TOs are actually evidence, they shall usually reflect the physical movements in a warehouse.
    if you have already moved your material out of its original bin, then you need another TO to get it back or into any other bin. TOs are not even just an evidence, they are instructions, they are the communication method to instruct a warehouse worker to do something.So you should not try to avoid this important step.

  • User Exit for putting own stock placement logic in WM (Warehouse Managment)

    Hi Techi's,
    I have got one requirment for stock placement in Warehouse Managment as below:
    If client uses the standared strategy for putting stock in Storage Bin as "Addition to Stock" Then the self life of the coming material is being replaced by the existing material's seft life.
    If they use the "Next Empty Bin" strategy than the obove issue is not coming but system always searches for the full empty bin only thus wastage of the existing bin's which already has some space.
    Now what my client wants is to use the "Next Empty Bin Strategy" so that self life is not being overwritten but along with system should not search the complete empty bin for placing the stock rather it should search the bin's which already has some space then later move to the empty bin's.
    For good reciept they are using MB01.
    In summary its a mixture of "Addition to Stock and Next Empty Bin" Strategy.
    Please suggest me the Exit for this if available or tell me the code if already has implemented it. Friends its going very hot.
    Please please help me.
    Thanks in Advance.
    -=Maddu=-

    Hi Maddu,
    If I undertstand it correctly,
    System should search for the available Bin Capacity, and if there is space available the next incoming stock also need to be placed in the same Bin (system should suggest the Bin).
    Now, let us consider the Physical process involved. Let us say, System suggested Bin A1001 and stock of Material A 500 Qty has been placed in some part of the Bin. Now, next time for the same material while incoming, system let us assume for time being suggested A1001 Bin due to available capacity. The operator should place the stock in the same bin, right. Assume that you have two quants in the Bin so that in system Shelf life date (GR Date) is different for these two different receipts. However, while Issuing even if system suggested Bin based on Shelf Life date, how the Operator will physically identify between the above two stocks. Hence, there should be physically some more identification parameters.
    Under this case, either you can have Batch Management, (two have multiple quants) or Storage Unit Management. In this way, system will suggest the Identifier based on GR Date or Shelf life Exp date, also physically some labels placed to identify the different stocks in the same Bin.
    I hope, it clarifies your doubt.
    Last but not the least, user Exit will not solve your purpose.. instead operation process change involved along with Batch Identifier or Storage Unit Identifier.
    Please reward points, if it helps.
    Thanks & Regards,
    Ramkumar

  • Splitting comma seperated column data into multiple rows

    Hi Gurus,
    Please help me for solving below scenario. I have multiple value in single column with comma seperated values and my requirement is load that data into multiple rows.
    Below is the example:
    Source Data:
    Product         Size                                 Stock
    ABC              X,XL,XXL,M,L,S                 1,2,3,4,5,6
    Target Data:
    Product         Size                                 Stock
    ABC              X                                     1
    ABC              XL                                   2
    ABC              XXL                                 3
    ABC              M                                    4
    ABC              L                                      5
    ABC             S                                        6
    Which transformation we need to use for getting this output?
    Thanks in advance !

    Hello,
    Do you need to do this tranformation through OWB mapping only? And can you please tell what type of source you are using? Is it a flat file or a table?
    Thanks

  • Insert data into multiple entities at once using a view object

    Hi,
    I'm trying to insert data into multiple entities at once using a view object, but unfortunately it doesn't seem to work. The two entities have a 1:1 association. I created a view object which contains both entities and I made sure they aren't read-only. But like I said it doesn't work, I can't insert data in both entities at once... :(
    Is this possible? And how (if it is)?

    Hi,
    I'm trying to insert data into multiple entities at once using a view object, but unfortunately it doesn't seem to work. The two entities have a 1:1 association. I created a view object which contains both entities and I made sure they aren't read-only. But like I said it doesn't work, I can't insert data in both entities at once... :(
    Is this possible? And how (if it is)? Peter:
    This is definitely supported and tested. Please send us the exception stack trace. You must running into other problems. A few things to note:
    A) You have to mark the entities as both updateable (not read-only) and not reference-only.
    B) If you're not seeing an exception stack, turn on diagnostic. Here is how:
    To turn on diagnostic, go to the IDE,
    1. Select the project.
    2. Do right mouse click and select "Project Settings..."
    3. On the Settings dialog, select Configurations/Runner.
    4. In the righthand side pane, you should see a textbox for "Java
    Options". Please add the following JVM switch:
    -Djbo.debugoutput=console
    Then, rerun. The run command should include
    -Djbo.debugoutput=console as in
    "D:\JDev9i\jdk\bin\javaw.exe" -Djbo.debugoutput=console -classpath ...
    You should now see a lot more output on the IDE's message window. Here you should see the exception stack trace.
    If you invoking your app directly from command prompt, just add "-Djbo.debugoutput=console" after your "java.exe".
    Thanks.
    Sung

  • Multiple bins in one section in storage type with 'C' open storage strategy

    Experts,
    I am doing random storage replenishment process for a Low rack location. The replenishment gets triggered from high rack to low rack.
    The low rack storage type is defined as next empty bin as putaway strategy and the storage type contains multiple bins in each section.
    There is process change and I want to place multiple SUs in one bin , I want to use the putaway strategy as 'C' open storage
    and mixed storage allowed with SUT check and SU management active . It is working fine as expected in terms of triggering replenishment
    and storing multiple SUs in 1 bin.My concern is that as a rule open storage should contain only one storage bin for section.But in my design , each section contains
    multiple storage bins. Does is really hurt in any form? What are consequences? Please suggest.
    Thanks in advance

    Experts,
    I am doing random storage replenishment process for a Low rack location. The replenishment gets triggered from high rack to low rack.
    The low rack storage type is defined as next empty bin as putaway strategy and the storage type contains multiple bins in each section.
    There is process change and I want to place multiple SUs in one bin , I want to use the putaway strategy as 'C' open storage
    and mixed storage allowed with SUT check and SU management active . It is working fine as expected in terms of triggering replenishment
    and storing multiple SUs in 1 bin.My concern is that as a rule open storage should contain only one storage bin for section.But in my design , each section contains
    multiple storage bins. Does is really hurt in any form? What are consequences? Please suggest.
    Thanks in advance
    Hello,
    You are right. Normally it does not hurt, but what you are doing with the new process change contradicts your original design. Can you explain why you had storage sections in the area in the original design? Did you segregate SKU's by product families/fast movers etc....and now you dont have that requirement anymore or your SKU management has changed?

  • Importing CSV files into Multiple Tables in One Database

     I have a web based solution using Microsoft SharePoint and SQL Server that is created to centralize dat collection and reporting of program metrics used in montly reviews.
    A person from each program enters dat manual or by pushing the data using automated data import tools. The user then is able to generate reports and provide presentations to their stakeholders.
    There are are programs that are located in US and 2 that are located in Japan. All, including programs in Japan use the MS Project with a plug-in tool that allows them to auto input data. When the user click the "Send To.." button, the data goes
    in to multiple tables in one database.
    Everything is set up exactly the same for every program; however, we have discovered becase of a firewall, along with some of the different settings that the MS Project has over in Japan, the 2 program users are not able to auto import their data.
    The suggestion is to have the program users export the MS Project file into a CSV and email it. I will then take it and convert the data, such as the dates and place them on a Network Drive. There will be 2 folders, one for each program.
    I feel it will be an easy process just to load the data from the Network Drive into the same tables that are created for auto import.
    My Concerns/Questions:
    1. Should I create 1 SSIS package or should there be 2, one for each program?
    2. US and Japan program users send their data once a month. The converted files are going to be saved in the location marked with a date (ex:201402). How can i have it to where SSIS will automatically load the data every time i place new files in the designated
    folders or when i update an exsisting file?
    Can you provide an example with your suggestion please?
    I greatly appreciate the assistance!
    Y_Tyler

    Hello Vikash,
    Thank you! This will help me get started.
    There will be 2 folders, one with files with Program A data and the other with files with Program B data. All will have the same fields, just coming from different programs. You stated that I will be able to to load both in one package. Would there be two
    paths since there will be two separate folders?
    Using the example you provided, i am confident that I can create the package using one path into one table but not sure how to get the files from 2 paths (if there is) into multiple tables.
    Can you help clarify this for me?
    Thank you!
    Y_Tyler

  • Stock transfer to physical bins from 998 storage type

    Dear Experts,
    As part of data conversion,After loading huge stock into SAP 998 st type into INITIAL bin,I want to move the stock into physical bins.I have SU management activated.
    1)During the initial upload to 998 , I have taken Material slip field as storage bin coordinate in the external system, How would I move the stock into respective bins in SAP?
    2) How would I map SAP bins with stock locations (counter part for storage bins in external system) ? So that I want to make sure , stock will be placed into the right bins.
    3)What will be my approach for moving the stock into physical bins? Can it be through LSMW - LT01 with 999 movement type? Or is there any other method i can use?
    4)Is there any tamplete to use for the above process? Do I need to develop any conversion program?
    4) I want to print the storage units simultaneously during this process. How can I do this?
    I really appreciate your help.
    Thanks
    Edited by: RKsap193 on Oct 14, 2008 10:35 AM

    Hi,
    I would suggest you to chek this link:
    Re: Bin Number for the First Time Putaway
    if you are not already live, then it should be possible to add the target bin field directly to the 311 movement. so you do not even need TOs to get the material into the bin for the WM go-live.
    (Jurgen)
    Regards,
    Csaba

Maybe you are looking for