Stock placement strategy via user exit

Hello,
I'm tring to change putaway strategy by using a user exit.
In customizing i enter:
Logistics Execution u2013 Warehouse Management u2013 Strategies u2013 Putaway Strategies u2013 Define strategy for fixed bins.
Table V_T301S.
When i enter one of the movements i can put V next to User exit act.
How can I make the connection between the strategy and the user exit?     
Thank you,
Lilah.

Hi,
In the ST masterdata (config: WM - Masterdata - Define ST) you must activate the User Exit field for putaway and/or removal for the specified ST you want to use with a user exit. See view: V_T3010-USEIN or Table T331-USEIN. When this indicator is set and you go through the TO creation log, you will see that at some stage there will be an entry where is states that you are using an user exit to place/pick stock.
Cheers,
Hein

Similar Messages

  • Change employee group via user exit ?

    Hello,
    I would like to know if it is possible to change the field
    PSPAR-PERSG in infotype "action" -0000
    via user exit ZXPADU01/2 ?
    When I get p0000-MASSN = 10 ,i need to move 0 to
    PSPAR-PERSG but via the user exits it is not possible.
    Only when I debug and put in PSPAR-PERSG  the value 0 it works.
    Please let me know if there is away ...
    Thank you,
    Boaz

    Hi,
    Customizing 0184 could not met our requirements.
    We need to keep the original settings (ELN...), and we'd like to change the inbounde delivery item category according to specific purchase order informaiton, so MV50AFZ1 is required.
    Kindly please advise again.
    With regards.

  • Shipment cost - change customization of item categories via user exit

    hey ,
    is it possible to manpiulate the item categories customization to open manually/ automaticly via  user exit
    even if i customized them to open manually ?
    for example :
    if the shipment type is X - open manually , else automaticly .
    Regards
    ASA  .
    Edited by: ASA MOKED on Dec 23, 2009 11:38 AM

  • SAP WM-Stock Placement Strategy "P"

    Hi Gurus
    While using stock palcement strategy "P" "by storage  Unit Type" we are dividing bins to  section like
    Stoarge Type  Section   No of itms 
    231                 A               3                 1       2     3
    is this code need to append to the storage bin co ordinate
    like 002-001-A/1  002-001-A/2    002-001-A/3
    If so when i create the storage bin co ordinate through Ls01n by defining the Storage bin co ordinate as  002-001-A/1  system throw error "The special character "/" must not be used in the storage bin name".
    How to solve this ,pls explain the stock palcment through startegy "P" ,where to mention the bin section in the bin coordinate.

    Hi Kumar,
    I suppose you have maitained capacity check for the storage type 231 .
    Based on the SUT's and u r strategy P, the system will allcate the numbers.
    usually if there are two SUt's ina a bin where it belongs to the storage type 231 then the bin will have 001-02-A/2
    the special characters gets assigned after the placement.
    hope this helps !!!

  • PORDCR - Inbound IDOC via User-Exit

    Hi All,
    I would like to create a Purchase Order via an inbound Idoc with a message type PORDCR.
    I would like to make use of the enhancement MM06E001 and the function module EXIT_SAPLEINM_002 to populate data segments.
    Please advise if this is the correct user-exit to process an inbound idoc.
    Any input appreciated.
    Meghna

    Hi Meghanarrao,
    IDOC_INPUT_ORDRSP-->PERFORM fill_data_ordrsp-->and find the below user exits for each segment...
    List of user exits available for --
    EXIT_SAPLEINM_001   
    EXIT_SAPLEINM_002   
    EXIT_SAPLEINM_003   
    EXIT_SAPLEINM_004   
    EXIT_SAPLEINM_005   
    EXIT_SAPLEINM_006   
    EXIT_SAPLEINM_007   
    EXIT_SAPLEINM_008   
    EXIT_SAPLEINM_009   
    EXIT_SAPLEINM_011   
    EXIT_SAPLEINM_012   
    EXIT_SAPLEINM_013   
    EXIT_SAPLEINM_014   
    EXIT_SAPLEINM_015   
    EXIT_SAPLEINM_016   
    EXIT_SAPLEINM_017   
    EXIT_SAPLEINM_018   
    EXIT_SAPLEINM_019   
    EXIT_SAPLEINM_020   
    IDOC----- Dir -Enhancemnt --Description
    ORDCHG -O -MM06E001   -- Purch. Ord. Change
    ORDCHG- I -VEDB0001     --Sales Ord. Change
    ORDERS- O -MM06E001   --Purchase Orders
    ORDERS -I- VEDA0001     --Sales Orders
    ORDRSP -O- SDEDI001    --Order Confirmation
    ORDRSP -I- MM06E001    --Order Response for Purchase Order   "This is the Right one for Purchase order create
    IDOC           Msg        ANSI EDIFACT I O
    ORDERS01 ORDCHG 860 ORDCHG X X
    ORDERS01 ORDERS 850 ORDERS X X
    ORDERS01 ORDRSP 855 ORDRSP X X
    IDOC_INPUT_ORDRSP--Function module-BUS2012-Inbound-Purchase order / order confirmation
    regards,
    Prabhudas

  • Need to change SD Pricing Procedure or Doc Pricing Procedure via User Exit

    I have a need to override the SD Pricing Procedure that is determined via standard Pricing Determination Config.....what user exit
    can I use to accomplish this...
    OR
    is there a user exit prior to the Pricing Determ code that I can use to override the Doc or Customer Pricing Procedure that would
    have been retrieved from the Order Type and Customer Master
    Thank you for any prompt replies.
    I'm on SAP ECC 6.00

    Dear John
    Try with any of these User Exits
    -  USEREXIT_PRICING_CHECK (module pool SAPMV61, program MV61AFZA)
    -  USEREXIT_CHANGE_PRICING_RULE (module pool SAPMV61A, program MV61AFZA)
    thanks
    G. Lakshmipathi

  • Best practice on integration message augmentation via user exit or rfc call

    I am looking for documentation that would provide best practices on whether to use user exits to augment the data on an IDOC or to forward the standard SAP produced IDOC to PI where rfc calls are made to augment the data as required for the specific target system.
    I am sure there are pros and cons for both solutions, but I am hesitant to use user exits since we now have moved the knowledge of what a target system wants from the integration layer to the source layer.  If a second target system comes along in the future, the user exit becomes more complicated with additional target specific requirements. 
    Any links to best practice documentation on this subject is greatly appreciated.
    Edited by: Sean Sweeney on Oct 15, 2009 6:59 PM

    Hi Steve,
    Might be trying for solution for a long time, If i understood your question clear let me clarify you few points.
    You are trying to access the bex query which is designed with the exit's in the background based on the logic and trying to call the entire dimensions and key-figures in a single connection. Then you are trying to map those data in the charts.
    Steve, try to make more connections based upon the logic and split them. use the same query but split them by sales per customer group, sales per day, sales per week by making three different connections and try. You can merge the prompts from all connections.
    Hope this Helps!!!
    Sorry if i misunderstood your question.
    --SumanT

  • Update Delivery qty via user exits

    Hello all,
    I need to replace the delivery qty that is copied from sales order with another qty during delivery creation (or) at the time of saving the delivery. I have tried replacing the field LIPS-LFIMG in various user exits. But none had updated the delivery qty(somehow SAP again replaces the new value with the original value). If you know how to update a delivery qty thru an user exit, please give me details.
    Thanks a lot

    Hi Bala;
       Have you tried this through the routines in transaction VOFM?  An example routine is in the VOFM menu path "Data Transfer -> Deliveries".  Check the code under routine 101, that may help you.
    Best Regards,
    John

  • Copy header text from DO to billing via user-exit

    Dear Experts,
    We have a requirement to copy one text field in the DO header to Billing header text field. I've searched the forum before posting this one but none seems to fit my requirement. I am using RV60AFZC form USEREXIT_FILL_VBRK_VBRP for this. From VF01, I see the header text was populated but after saving, it is being cleared out. I suspect the copy control from sales order to billing header text is doing this, nothing is saved in the SO.
    Any idea how to do this by configuration or by user-exit/enhancement spot?
    Looking forward for your responses.
    Thanks in advance.
    nEnE

    Can you please check VOFM>Copying Requirements>Texts, Routine 1. The documentation states:
    "This requirement checks if the reference document header has a text entry.  If so, it is automatically transferred. This requirement is assigned in the detail of the access sequence for header text determination."
    You can copy this in a 9XX routine number and write your specific code there.
    Hope this helps!

  • Default quantity on sales order - Via user-exit, Badi...

    Hallo everybody,
    do you know if it is possible to put a default quantity on a position of a sales order?
    That is: user insert material code, does not input any quantity --> default 1Pc..
    Thank you very much!
    Edited by: Mike Farina on Jan 6, 2008 8:38 PM
    Edited by: Mike Farina on Jan 6, 2008 8:57 PM
    Please help me.... points, points, points...

    Hi,
    In program MV45AFZZ use the user exit :
    FORM USEREXIT_MOVE_FIELD_TO_VBAP.
    there write simple code like this.
    IF vbap-kwmeng IS INITIAL.
    vbap-kwmeng = '1'.
    ENDIF.
    Rewards points if helpful.
    Regards,
    Srinivas Ch

  • WM -Stock Placement Strategy

    i maintain the storage bin structure for automatic creation
    warehouse number storage type     sequence
    ZWM           ZEL       001 
    ZWM           ZEL       002
    ZWM           ZEL       003
    Material Like RM01_A, RM01_B, RM01_C   
    RM01_A              RM01_B              RM01_C   
    0A-01-01          0B-01-01          0C-01-01
    0A-01-02          0B-01-02          0C-01-02
    0A-01-03          0B-01-03          0C-01-03
    0A-01-04          0B-01-04          0C-01-04
    0A-01-05          0B-01-05          0C-01-05
    0A-01-06          0B-01-06          0C-01-06
    0A-01-07          0B-01-07          0C-01-07
    0A-01-08          0B-01-08          0C-01-08
    0A-01-09          0B-01-09          0C-01-09
    0A-01-10          0B-01-10          0C-01-10
    Example
    Our process is each material (RM01_A)  has allocated the  particular bin series like from A-01-01 to A-01-10.
    other material RM01_B has particular series from B-01-01 to B-01-10.
    If it is bin is not have space means system should moving  to other series of available of bins
    System is should give preference to allocated bin only.  If bin is full means stock is move to available bin
    pls help me ,iam doing implementation . i need your help
    With regards
    dinesh
    Edited by: code acess on Jul 5, 2011 4:39 PM
    Edited by: code acess on Jul 5, 2011 4:41 PM

    Hi,
    Mainitain the search sequence in statergy.  SPRO>LE> WM > Strategies> Activate storage type search-->Define search sequnece.
    If you have defined 3 storage type 001, 002 and 003 for ZWM where house,  then maintain search sequence like this
    Wh NO      St type Ind         Storage Type 1        2        3
    ZWM         001                     001                        002     003
    ZWM         002                     002                        003     001
    ZWM         003                     003                        001     002
    Rgds,
    Vinay

  • User exit for PGI via delivery (Vl02N)

    Hi Folks
    Can you suggest me appropriate user exit which can be used during PGI for delivery in Vl02N. This should get triggered when POST PGI tab is hit in VL02N.
    Via USer exit I want to change the GL account in the accounting document for PGI ( GL account for Tr price difference which is posted via key AUM (Expense/revenue from stock transfer).
    Please reply ASAP.
    Thanks
    Vipin

    Hi Vipin
    I did a small check in our internal system.
    In VL02n choosing the PGI TAB it hits user exit MV50AFZ1 -> FORM USEREXIT_SAVE_DOCUMENT_PREPARE
    This is the call:
    Main Program     SAPMV50A
    Source code of   FV50XF0B_BELEG_SICHERN
    form BELEG_SICHERN_DET_CHECK
    * Userexit
        PERFORM userexit_save_document_prepare(sapmv50a).
    So you are good to go with MV50AFZ1 just use
    form USEREXIT_SAVE_DOCUMENT_PREPARE
    Kind regards
    Brian

  • WM - Stock Placement and Stock Removal Strategy

    Hi Gurus
    Need yr expertise..
    What would be the ideal stock placement strategy if need to store standard pack in one location and partial quantity in another location?
    example:
    standard pack for material A is 100pcs
    if GR 250 pcs, TO need to be created for 200pcs at location A (since it is standard pack) and
    50pcs at location B (sicne it is partial)
    The same logic aplly for stock removal strategy. If customer order of 200pcs, system need to pick
    from location A (since it is standard pack). If customer order 50pcs, system need to pick from
    location B. What will be the ideal stock removal strategy?
    Please advise
    Rgds..Sanjay

    yu can make use of the small/large stock removal strategy and for the concerned material in WM 2 view you can give the control quantity like if the requirment is of >200 pc then storage type 0002 should be used to pick the goods otherwise if required quantity is less then system should search for storage type 0001
    this is a standard strategy

  • User exit in PR Release Strategy/Workflow

    Hi xperts,
    Need to seek some clarification regarding above subject.
    If i were to set in release code config the workflow setting is "9" that is role resolution via user exit, do i still need to config the workflow?
    If i do NOT need to config the workflow (whether by user id or position id or etc), how do I assign authorization of release code to the approver?
    Thanks in advance.

    Thanks Jurgen
    I know that the codes will be assigned via authorization profiles and roles.  Let me rephrase my questions:
    1. If using user exit for triggering workflow, do i need to maintain the workflow config?  or the system will route automatically to the user/approver inbox/email by whatever conditions that hv been setup (or on the other hand, NO need to maintain the workflow cofig)?
    2. If system will automatically route to the approver inbox, how do i identify the approvers user id that i need to assign the role?
    Thanks.
    Anybody??
    Edited by: MM1974 on May 19, 2010 4:31 AM

  • Enhancements, User Exits

    Hi all,
    where can u find all the userits & enhancements available in Materials Management.
    thanks

    Dear Sridhar,
    ME590001 |Grouping of requsitions for PO split in ME59                |
    MEAG0001
    Distribution of Contract/Scheduling Agreement from CRM
    MEETA001
    Define schedule line type (backlog, immed. req., preview)
    MEFLD004
    Determine earliest delivery date f. check w. GR (only PO)
    MELAB001
    Gen. forecast delivery schedules: Transfer schedule implem.
    MENUCRQ0
    QM: Enhancement in CRQ0 Menu (Work Center)
    MENUQA00
    QM: Enhancement in QA00 Area Menu (Quality Inspection)
    MENUQB00
    QM: Enhancements in QB00 Area Menu (QM in Procurement)
    MENUQD00
    QM: Enhancement in QD00 Menu (Archiving)
    MENUQM00
    QM: Enhancements in QM00 Area Menu (Quality Notification)
    MENUQMM0
    QM: Enhancements in QMM0 Menu (Material-Related Q. Planning)
    MENUQP00
    QM: Enhancements in QP00 Area Menu (Inspection Planning)
    MENUQS00
    QM: Enhancements in QS00 Area Menu (Basic Data)
    MENUQT00
    QM: Enhancement in QT00 Area Menu (Test Equipment)
    MENUQV00
    QM: Enhancements in QV00 Area Menu (QM in SD)
    MENUQZ00
    QM: Enhancements in QZ00 Area Menu (Quality Certificate)
    MEQUERY1
    Enhancement to Document Overview ME21N/ME51N
    MEREQ001
    Customers' Own Data in Purchase Requisition
    MEVME001
    WE default quantity calc. and over/ underdelivery tolerance
    MGA00001
    Material Master (Industry): Checks and Enhancements
    MGA00002
    Material Master (Industry): Number Assignment
    MGA00003
    Material Master (Industry and Retail): Number Display
    MGV00001
    Material Master (Industry): ALE Distribution
    MGV00002
    Material Master (Industry): Read Values for Filter Objects
    MGV00003
    Material master (retail): ALE distribution
    MGW00001
    Material Master (Retail): Additional Data
    MGW00002
    Material Master (Retail): Number Assignment
    MKKS0001
    Variances: Automatic Job Scheduling in Subsequent Period
    MM06E001
    User exits for EDI inbound and outbound purchasing documents
    MM06E002
    IDOC processing for contracts in inbox
    MM06E003
    Number range and document number
    MM06E004
    Control import data screens in purchase order
    MM06E005
    Customer fields in purchasing document
    MM06E007
    Change document for requisitions upon conversion into PO
    MM06E008
    Monitoring of contr. target value in case of release orders
    MM06E009
    Relevant texts for "Texts exist" indicator
    MM06E010
    Field selection for vendor address
    MM06E011
    Activate PReq Block
    MM06L001
    Exits to determine ratings in vendor evaluation
    MM08R001
    User exits for ERS
    MM08R002
    User exit for tolerance checks
    MM61W001
    User exits in function module FORECAST environment
    MMAL0001
    ALE source list distribution: Outbound processing
    MMAL0002
    ALE source list distribution: Inbound processing
    MMAL0003
    ALE purcasing info record distribution: Outbound processing
    MMAL0004
    ALE purchasing info record distribution: Inbound processing
    MMDA0001
    Default delivery addresses
    MMFAB001
    User exit for generation of release order
    MPKB0001
    User's own functions in the Kanban processing
    MPKB0002
    Customer defined display in kanban board
    MPKC0001
    User exit for kanban calculation
    MPKD0001
    Kanban output as EDI
    MPKP0001
    Customer Defined Display in Kanban Board
    MPKR0001
    Customer fields in kanban control cycle
    MPR10001
    User Exits in TA MPR1 (External Forecast Transfer)
    MPRO0004
    Postprocessing of forecast errors and exception messages
    MRMH0001
    Logistics Invoice Verification: ERS procedure
    MRMH0002
    Logistics Invoice Verification: EDI inbound
    MRMH0003
    Logistics Invoice Verification: Revaluation/RAP
    MRMN0001
    Message output and creation: Logistics Invoice Verification
    MSSTV001
    Customer Exit 'Team Viewer': Exclude Manager
    MV56AINI
    Initialization of transaction control for transportation
    MVEIPREF
    User exits - Preference determination
    MWM2S001
    Exit to Determine 2-Step Picking Characteristic
    MWMBAP01
    Enhancement for BAPI WarehouseTransOrder.GetDetail
    MWMBAP02
    Enhancement for BAPI WarehouseStock.GetDetail
    MWMD0001
    Transfer order print via RLVSDR40
    MWMD0002
    Transfer order print as multiple process with RLKOMM40
    MWMIDI01
    Enhancement for error handling with IDOC inbox
    MWMIDI02
    Enhancement for mssge WMTOCO (Confirm transfer order) Inbox
    MWMIDI03
    Enhancement for mssge WMCATO (Cancel transfer order) Inbox
    MWMIDI04
    Enhancement for mssge WMBBIN (Lock storage bin) Inbox
    MWMIDI05
    Enhancement for mssge WMTREQ (Create transfer req.) Inbox
    MWMIDI06
    Enhancement for mssge WMSUMO (Move storage unit) Inbox
    MWMIDI07
    Enhancement for Output WMPIHU (Create Pick-HU) Inbound
    MWMIDO01
    Enhancement of IDOCs WMTOID01 (Transport request) Outbox
    MWMIDO02
    Enhancement of IDOCs WMCAID01 (Cancel transfer req.) Outbox
    MWMIDO03
    Enhancement of IDOCs WMRRID01 (release ref. no.) Outbox
    MWMIDO04
    Enhancement of IDOCs WMIVID01 (system inventory rec.) Outbox
    MWMIDO07
    Enhancement for error handling for IDOC inbox: PDC
    MWMIDO08
    Enhancement for message WMMBXY (goods movement)  Inbox
    MWMIDO09
    Enhancement for msg. WMINVE (count data, phys. invnt.) Inbox
    MWMIDO10
    Enhancement for msg. WMTORD (Generate transfer order) Inbox
    MWMIDO11
    Enhancement for message WMTORD: TO with several items
    MWMIDO12
    Enhancement for Output WMPIHU (Pick-HUs) Outbound
    MWMIDO13
    Extension for WMMBXY (subsequent tasks after goods movement)
    MWMK0001
    Warehouse management: Customer exit for storage unit number
    MWMMOB01
    Enhancement for Verification Field in the Warehouse Master
    MWMMOB02
    Extension for Barcode Translation
    MWMPP001
    Enhancement WM/PP Interface (automatic TR generation)
    MWMRF001
    RF: Influence Display of material description
    MWMRF100
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0100)
    MWMRF101
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0101)
    MWMRF102
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0102)
    MWMRF104
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0104)
    MWMRF105
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0105)
    MWMRF106
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0106)
    MWMRF107
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0107)
    MWMRF108
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0108)
    MWMRF151
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0151)
    MWMRF152
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0152)
    MWMRF153
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0153)
    MWMRF170
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0170)
    MWMRF202
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0202)
    MWMRF203
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0203)
    MWMRF204
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0204)
    MWMRF205
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0205)
    MWMRF212
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0212)
    MWMRF213
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0213)
    MWMRF221
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0221)
    MWMRF302
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0302)
    MWMRF303
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0303)
    MWMRF304
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0304)
    MWMRF305
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0305)
    MWMRF312
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0312)
    MWMRF313
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0313)
    MWMRF321
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0321)
    MWMRF400
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0400)
    MWMRF402
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0402)
    MWMRF403
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0403)
    MWMRF404
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0404)
    MWMRF405
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0405)
    MWMRF406
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0406)
    MWMRF410
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0410)
    MWMRF411
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0411
    MWMRF412
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0412)
    MWMRF502
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0502)
    MWMRF503
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0503)
    MWMRF504
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0504)
    MWMRF505
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0505)
    MWMRF600
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0600)
    MWMRF601
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0601)
    MWMRF630
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0630)
    MWMRF631
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0631)
    MWMRF632
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0632)
    MWMRF633
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0633)
    MWMRF634
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0634)
    MWMRF650
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0650)
    MWMRF651
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0651)
    MWMRF700
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0700)
    MWMRF701
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0701)
    MWMRF702
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0700)
    MWMRF703
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0703)
    MWMRF704
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0704)
    MWMRF705
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0705)
    MWMRF760
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0760)
    MWMRF761
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0761)
    MWMRF762
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0762)
    MWMRF763
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0763)
    MWMRF764
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0764)
    MWMRF765
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0765)
    MWMRF766
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0766)
    MWMRF767
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0767)
    MWMRF768
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0768)
    MWMRF769
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0769)
    MWMRF777
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0777)
    MWMRF800
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0800)
    MWMRF801
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0801)
    MWMRF802
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0802)
    MWMRF803
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0803)
    MWMRF804
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0804)
    MWMRF805
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0805)
    MWMRF806
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0806)
    MWMRF807
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0807)
    MWMRF888
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0888)
    MWMRF889
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0202)
    MWMRF998
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0998)
    MWMRF999
    ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0999)
    MWMRFCOD
    Enhancement for function codedisabling
    MWMRFDLV
    select delivery by user criteria
    MWMRFPRT
    Enhancement for printing
    MWMRFSRT
    ENHANCEMENT FOR TO SORTING
    MWMRFSSG
    user exit for sorting TOs in RF system-guided transaction
    MWMRFUP
    Customer defined general purpose pushbutton called from scr.
    MWMRP001
    Cust. Exit for Fixed Bin Replenish.: Delivery Item Selection
    MWMRP002
    Cust. Exit for Fixed Bin Replenishment: TR Quantity Distr.
    MWMRP003
    Customer Exit for Replenishment using RLLNACH1
    MWMRP004
    User Exit for Replenishment using RLLNACH4
    MWMTO001
    Enhancements for end of transfer order generation
    MWMTO002
    Enhancements at end of transfer order confirmation
    MWMTO003
    Own stock placement strategy
    MWMTO004
    Own stock removal strategy
    MWMTO005
    Underdelivery
    MWMTO006
    Overdelivery and with restriction, also underdelivery
    MWMTO007
    Palletization and storage type search for stock placement
    MWMTO008
    Storage type search for stock removal
    MWMTO009
    Prevent the TA items being deleted
    MWMTO010
    Exit: Calculation of Total Planned TO Processing Time
    MWMTO011
    Correction of Planned Processing Time for TO Item
    MWMTO012
    Correction of Sorting and Split Transfer Order
    MWMTO013
    Stock Removal for Sev. Storage Types as in Stringent FIFO
    MWMTOAU1
    Own sel. of transfer reqs. for auto. transfer order creation
    MWMTOAU2
    Own selection for auto. transfer order creation via ref. no.
    MWMTOAU3
    Separate selection of posting changes for autom.TO creation
    MWMTR001
    Exits at the end of transfer rqmnt creation (IM,PP interf.)
    MYCATS01
    Enhancement of Picklists for CATS notebook
    MYCATS02
    Send Customer Table or Standard Texts to CATS notebook
    MYCATS03
    Supplement Offline Time Data
    MYCATS04
    CATS notebook: Influence Synchronization Messages
    Hope this will help.
    Regards,
    Naveen.

Maybe you are looking for