STOCK PORTLET USING HTT CONFIGURATION NEEDED

Hello,
We had a stock portlet in our corporate portal which was configured thru HTT( Hyper Text Template). When we upgraded the Release2, we upgraded the PDK also. The new PDK release has no HTT included. We tried to copy the old HTT and tried to install it in IAS release 2 portal, but we could not do that.
Due to the fact that its a live system, we want to configure the stock portlet asap, so any help will be greatly appreciated...
Thanks in advance,
Johnson

RAID doesn't have a problem with VMware or shouldn't.
A RAID can be used for almost anything and in multiple configurations.
You could first format each drive into 1/3 and 2/3 and then stripe the first outer volume on each for scratch, and use the 2/3 for data if you want.
Same with internal and external. Just a matter of how many drives. And all of it depends on size of files you edit with and performance you want. External just means you need to look at controllers and type of cases. One RAID for backups, another for live data, 3rd for scratch.
If you work with 2GB files, just doing a save might take longer than some like, so they could save their work to a RAID.
For first starting out, just try with a dedicated drive for scratch, or even 1/3 of one of your drives for scratch volume. But if your scratch needs more than 200GB of space, you might be faced with a choice of dedicating a drive, or going with stripped RAID.
The pdf guide also has instructions on testing your setup with real work files to see what works best. You will probably change what you do and how you configure your system over time hopefully to make better use.
But first, use a basic setup until you have outgrown what it can do, if you do.
A great place to find reviews of RAID controllers and external cases is AMUG.
http://www.amug.com
http://www.amug.org/amug-web/html/amug/reviews/articles/highpoint/3522/
And for performance, lot of great benchmarks on Barefeats.
http://www.barefeats.com
http://www.barefeats.com/hard93.html
http://www.barefeats.com/hard100.html
http://www.barefeats.com/harper3.html
http://www.barefeats.com/hard101.html
http://www.barefeats.com/hard102.html

Similar Messages

  • HT5188 I am using Apple Configurator and would like to put iMovie on our 30 iPads--need redemption codes?

    I am finally sucessfully using Apple Configurator. Our teachers would like to have iMovie on the iPads In order to use Apple Configurator I need to have redemption codes.  I am at a loss as to how to get these codes.  Any suggestions.

    You would be wanting VPP codes (volume purchasing plan).Here is where you want to go: http://www.apple.com/education/it/vpp/
    Enroll and setup which app or apps you want. After purchasing, apple will send you a vpp spreadsheet that you import into configurator. The guide at the site listed above will help.

  • I manage 60 ipads for a school using Apple Configurator. Need to update to iOS7 and AC1.4.3...Is it best to use Mountain Lion or Mavericks, as I also need to update from Lion 10.7 for the new AC and iOS to work properly.

    I manage 60 ipads for a school using Apple Configurator. Need to update my devices to iOS7 and Apple Configurator to 1.4.3...Is it best to use Mountain Lion or Mavericks, as I also need to update from Lion 10.7 for the new Apple Configurator and iOS7 to work properly.

    I always run a Time Machine backup before updating anything and recommend you run a backup as well. Paid apps should migrate over without any problem. If you have problems with VPP codes not transfering over properly, you can talk to your Apple SE or contact VPP for Education support and they can help you. While I haven't experienced any problems with updating, its never a guarantee that others will have the same experience.
    Good luck!
    ~Joe

  • Getting file directory using dynamic configuration:Code needed

    Hi,
    I need the code for getting the source file directory name using dynamic configuration. Also, an explanation on how it can be used in mapping for comparison.
    Thanks,
    Vishal

    Hi Vishal,
      Refer  carefully the following blog by micheal to get the  Attributes dynamically during runtime by enabling the Adapter Specific message Attributes in adapter level.
      /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    Create an UDF in mapping with no input parameters to it and include the piece of code and use it according to your requirement in mapping.
    //write your code here
    try{
    String filedirectory    = "";
    DynamicConfiguration conf1 = (DynamicConfiguration) container
        .getTransformationParameters()
        .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key1 = DynamicConfigurationKey.create( "http:/"+"/sap.com/xi/XI/System/File","Directory");
    filedirectory = conf1.get(key1);
    return filedirectory;
    catch(Exception e)
         String exception = e.toString();
          return exception;
    Thanks,
    Ram.

  • What are the configuration need between R3 and XI when we use RFC sync adap

    hi,
    What are the configuration need between R3 and XI when we use RFC sync adapter.
    Regards
    siva.

    if its the sender adapter ref:
    RFC adapter
    Sender- /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
    Receiver;
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
    Also;
    trouble shooting rfc/soap -
    /people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009

  • What ports need to be opened on my firewall to use apple configurator

    I need to open ports n my corporate environment to Download the current IOS version and activate the certificate when using apple configurator.
    Can someone please advise which ports these are.

    Business & Education - Apple Configurator - Apple Support
    I cannot find any reference to "open port(s)" with JiveSearch or Google Site Search of all of AppleWorld's subdomains
    EDIT = I stand corrected... appears I missed one (see above)
    https://help.apple.com/configurator/mac/1.0/ = the Help File Online
    ÇÇÇ

  • Changing DataSource Configuration using ConfigTool - Help Needed.

    Hello Everyones,
    I have an EP 7 which I have installed on a WAS ABAP + JAVA. The Data Soruce configuraion is in dataSourceConfiguration_abap.xml because of this I cannot create any new users in the Portal, can someone tell me how I can change this Config file using the ConfigTool and what procedure is to be used.
    Thanks for your help,
    John.
    Message was edited by: John Bray

    See Changing DataSource Configuration using ConfigTool - Help Needed.

  • OMJJ - Where I diferentiate "Stock quality inspection" -  "Stock unrestricted use"?

    Good morning, experts!
    I need to know how to set up a move for the input material in quality stock, without having to use the QM or configure the material. We have the standard movement 503 that is received at the stock in quality inspection and the movement 501 that the entry into stock unrestricted use. In what field of transaction OMJJ I make this differentiation?
    I appreciate your help.

    Hi,
    If one you use 501 the stock is sent to Quality inspection, then this could happen because you have checked the Post to Insp. stock indicator in the material master (Purchasinf view).
    Post to Inspection Stock
    Specifies whether the material is subject to quality inspection (without inspection lot processing) and whether a goods receipt is posted to inspection stock. The indicator is copied to purchase order items and goods receipt items as a default value.
    Dependencies
    You can select this indicator, if no stock-relevant inspection type has been selected in the inspection setup, and therefore no stock-relevant inspection lots can be created.
    If you activate a stock-relevant inspection type, the entry in this field is deselected and can no longer be maintained. In this case, a corresponding indicator in the inspection type controls whether goods are posted to inspection stock.
    When you use 501 the stock should be posted as unrestricted stock, then you can move the stock from Unrestrected to Quality Inspection stock using movement type 322 (use t-code MB1B).
    With movement type 321 you can move from  Quality Inspection stock to Unrestricted.
    Kind Regards,
    Mariano

  • Preparation of Cost Sheet using Variant Configuration

    We have a requirement which needs to be configured in Standard SAP using variant configuration ( as Suggested by our client )  without using any customized functionality the scenarios is as fallows:
    Preparation of Cost Sheet:
    Company XX needs to procure material M1 (Like Cartons) for Plant A, plant B which is manufactured by Primary Vendor PV1, PV2.
    The price for procurement of material M1 has to be determined using cost sheet
    Primary Vendor PV1, PV2 Procures Raw materials and Packaging materials required to manufacture material M1 from Secondary vendor SV1, SV2, SV3
    The rates of these materials are added into cost sheet as cost of components.
    The rate for these materials varies depending on quota allotted for that particular
    Secondary vendor SV1, SV2.
    Cost sheet consists of
    Cost of Component materials required for mfg Material M1( These components called Feed stock
    Materials are procured by secondary vendor)
    Working Capital of Primary Vendor
    Conversion cost
    Discounts
    Surcharges
    Transportation cost
    ETc.....
    Well Thanks in Advance....

    hi Rav,
    as you said i have configured the system and it is working fine.
    but the problem is, when creating sales related documents only Sales BOM selection should happen i.e. characteristics which have values related sales must only be shown to the sales person where he makes required selection.
    other materials/assemblies which are also configurable and which make complete production BOM are selected by the production person.
    what selection a production planner makes must not be shown to the sales person. 
    for eg; if you want to purchase a color printer you only tell sales guy , i want a color printer which can print at least 10 pages / min. you will not tell him what printer should be made of, what ICs or what PCBs it must have.  and also company management may not wish to show all things to the customer/sales person.
    if this is the situation how it can be mapped?
    alternative item concept can be used, but for a single material if there are 3 or 4 alternatives, will it work properly??
    Regards,
    Pavan

  • How to create Image as Custom Property Type used in Configurable Web Part?

    I wanted to create custom configurable web part property for Image.
    Example - the screenshot of Image property used in Image web part is shown below:
    My goal is to create as many images as possible in custom configurable web part.
    I tried to write the code:
    [WebBrowsable(true),
    WebDisplayName("Example Photo"),
    WebDescription("Example Photo of the user"),
    Category("Custom User Profile"),
    Personalizable(PersonalizationScope.Shared)]
    public Image ExampleUserPhoto { get; set; }
    However, the result does not display Image configurable web part property.
    I wonder why the data type Image does not cause the custom web part to have Image configurable web part property.
    Other data types such as Boolean, Enum, Integer, String and DateTime can be used.
    How can I create Image as Custom Property Type used in Configurable Web Part?

    I have examined that context node __00 has been enhanced,and  has a class name  z___00. But  when I created a new attirubute by right click " Attributes" with wizard under context node __00.There is still  a error message "view is not enhaced or copied with wizard".
    But  when  I created a method  "getvaliation "  in the class of context node zcl__00, the attribute  'valiation' automatically created(at the same time the method "getvaliation' automatically  created for the attribute 'valiation') and I need not to create attibute 'validation' by wizard .  It seemed as if the problem is resloved. But when I make test for it in web ui .There is a runtime erro message.
    Do I need to make some configurations in  the business object layer  for the checkbox? but  the checkbox is only used as a flag  to decide whether a backgoud job is needed to be executed.
    Edited by: samhuman on Jun 22, 2010 10:31 AM

  • Is it possible to use variant configuration (with a Non-SAP solution) when creating ERP sales orders in SAP CRM WebUI

    Hello,
    our customer plans to use a Non-SAP solution for variant configuration (Camos) in SAP ERP (ECC 6.0) and in SAP CRM 7.0 EHP1 as well.
    ERP sales orders (and ERP quotations) should be created in SAP CRM (CRM WebUI).
    Is it possible to use variant configuration (with an external variant configuration tool) when creating ERP sales orders and quotations in the SAP CRM WebUI or do we have to implement SAP IPC for this?
    Thanks in advance.
    Regards,
    AEV

    Dear AEV,
    I think LORD (lean orders) should work with variant configuration as well. In the note 1236015 there is not restriction listed. However you need lord2 activated in ECC, and ECC system should be on EHP4.
    Best regards
    Rene

  • HT5927 Using apple configurator with supervised devises, enabling iCloud/ find my iOS device (after being supervised), backing up that supervised / find my iPhone enabled image, --issue; unable to apply back up to any iOS device (including the orign. devi

    Senario:
    Need to manage 500 Enterprise iPads
    Requirements;
    1) Trackable via Find my iOS device  (we have 500 iPads and with the 100 device limit per iCloud account for Find my iOS device limit we have 5+ iCloud accounts).
    2) Individually named iPads for locating and sending commands to wipe, lost mode, etc.. on map per Find my iOS device (we uniquely name them in Apple Configurator either by using the "sequensetially numbering feature", or by creating individual back ups (yes, 450) with the name specified in the image).
    3) Find my iOS device feature enabled in base Prepared or Supervised image (using one of our 5+ iCloud accounts) (image can be created during prepared stage, or in supervised stage) - tried both and have the same issue - which I am getting to...
    4) VPP codes for paid apps (all VPP codes purchased with generic account which is the Apple Admin account for VPP purchases). Apple Configurator is set up under a different/ unique Apple account (i.e. not VPP admin account) and not logged into iTunes for any purchases/ services).
    Issue: Can not do any following senarios;
    A)
         1) configure master iOS 7 iPad with iCloud account with Find my iOS feature enabled in Prepare stage (added during preparing stage)
         2) configure master iOS 7 iPad with iCloud account with Find my iOS feature enabled in Supervised stage (added after supervising, and then backing up that supervised and iOS Find my iOS device enabled)
    B) 1) Apply master image to any Supervised iPad (under senario step A) or senario step B)), including the (Supervised or/ Prepared iPad that was used to create the maset iOS 7 image
    Result = fail with Apple generic code "4" ; This is obviously due to Find my iOS device feature enabled during image capture.
    According to Apple (see Apple Config. Help) the 'Activation lock' (new feature in iOS 7) will not be enabled on a supervised device when an iCloud account with "Find my iDevice" is enabled. Their "help files" seem to imply after the device is Supervised, and a person (presumably and end user) adds thier own iCloud account with Find my iOS device enabled the activation lock is not enabled and erasing/ reconfiguring with Apple Configurator will not cause reimaging probhlems such as requiring the end user's credentials to reconfigure the device using Apple Configurator (i.e. you won't need the end user's credentials).
    Needed: To be able to configure Supervised iPads with iCloud account (Enterprised owned iCloud account) configured on the basse image, which has Find my iOS device enabled, and to be able to apply that base image to all Enterprise iPads without generic apple error code 4 issue.

    Hi all
    I am trying to replicate these steps in my environment but I am having trouble getting an iCloud backup restored to a supervised device. Can someone clarify the steps? The parts I am unsure on are:
    1) Do you Prepare in Configurator with all the institution owned apps? Or do you install them after restoring the iCloud backup?
    2) After entering the personal AppleID to restore the iCloud backup, the setup wizard prompts for the Institution/Configurator AppleID, there is an option to 'Skip Now'. Do you enter in the password for the institution account? or do you skip that step?
    3) What exactly is on the screen in the 'mini setup assistant' after the restore when you Refresh with Configurator?
    Any help would be greatly appreciated!

  • Trouble using apple configurator

    I have been trying to setup 20 iPads using Apple configurator for the last couple of days. I purchased all of my codes for each of the apps I want to install on the iPads. I have everything setup, but for some reason whenever I try to put the apps on the iPads using the codes through Apple configurator, I get an error saying that the code could not be redeemed and that I need to put my Apple ID and password in. I have authorized the computer with itunes and have done everything that I can think of, but I continue to get the same error. I am clearly missing something and any help would be greatly appreciated.

    Restarting Apple Configurator and/or redownloading and reimporting the VPP codes will often cure this issue.
    You should receive a pop up prompt, within Apple Configurator, asking you to sign in with your Apple ID* when trying to deploy apps that are using VPP codes to any iPads. Sometimes this prompt doesn't appear but disconnecting all the iPads and restarting Apple Configurator normally cures it.
    *This should be the Apple ID you used to download the app within iTunes before you imported the app into Apple Configurator - not the VPP account used to purchase the VPP codes.

  • Using apple configurator and VPP purchases,

    Can you purchase 20+  apps on computer using apple configurator, but use only 10 with this group and use the rest on another computer running the configurator? I assume you would have to download again, but unclear if you can after using with config app.

    Yes, there are two ways to do this.
    1) just download the same spreadsheet into Configurator on two different Macs. They can have the same Apple ID or different Apple IDs. As each one installs apps, it tries the redemption codes in the list and skips over ones that have already been used.
    2) Make a copy of the spreadsheet, open both in Numbers or Excel, and delete the first ten codes in one and the second ten codes in the other. Then import each into each copy of Configurator.
    Remember that you'll need to use one redemption code to buy the app in iTunes for each AppleID you use, on top of the codes you need for installing the apps on devices.

  • Use of Configuring "Stochastic Check of Documents"

    Hi All,
    I have a scenario I need to change the Invoice workflow at runtime based on some invoice document value......
    For this I have found a BADI BBP_STOCH_CUST_BADI.... this gets triggered only when we Configure "Define Stochastic Check of Documents" in SPRO   Supplier Relationship Management -> SRM Server -> Cross Application Basci Settings ->SAP Business Workflow -> Define Stochastic Check of Documents....
    This says that using this configuration you can change the approval workflow from standard one to the anyother workflow....Can anybody jus give focus when exactly this step can be configured so that I can make use of BADI?
    Or can suggest any other BADI which can be used to change the workflow based on the one of the invoice document value?
    Thanks In advance.
    Yaseen M

    The flag indicates whether field inserted in the database is to be filled with initial values. The initial value used depends on the data type of the field. I.e. type n(2) is '00'.
    When you create a table, all fields of the table can be defined as NOT NULL and filled with an initial value. The same applies when converting the table. Only when new fields are added or inserted, are these filled with initial values. An exception is key fields. These are always filled automatically with initial values.

Maybe you are looking for