Stock posting for lot 010000000121 not supported

Hi Experts,
I am unable to reverse the UD and stock by using SAP NOTE 175842.
By using std program RQEVAC50 activated ZQM_RQEVAC50 and given the transaction code.
When I runn this T Code System is giving error massage "Stock posting for lot 010000000121 not supported"
Cross Checked all parameters find below
1) For movement type 322 and 349 assigned T Code QA11 and QA12
2) Posted stock available in same storage location
3) Lot 10 qty posted to unrested qty 10 and lot status is " UD ICCO SPCO STUP "
4) Material Not serial managed
Pls tell me the reason why it is not happening
Thanks
Shiva Patil
Edited by: SHIVA PATIL on Jan 15, 2010 4:10 PM

Resolved

Similar Messages

How to change the posting date in UD stock posting for a HU managed item?

Hi,
We are using Handling Unit managed items with QM activation. For a specific HU managed material, we wanted to post the stock on a previous date. We have created PO on a back date and made GR also on a back date. Now the problem is, the system has generated an inspection lot. Now while trying to do UD and stock posting, I do not see the "Doc" tab which we normally see in UD stock posting for normal inspection lots (non-HU managed items) for changing the date.
I don't see any other way to change the posting date for the HU managed item in UD stock posting. Anyone can help please?
Thanks & Regards,
Madhavan Krishnamoorthy.

I don't think you can.
Craig

Navigation for screen is not supported

Dear experts,
I am translating a screen and i can see the changes on this system from every clients. but when i want to transport changes to target sistem i am creating a request from se38 with report RS_LXE_RECORD_TORDER. then i am assigning what it wants, when i am looking from se01 to my trasport of changes request there are object list. but if i am clicking twice on it the status message is "navigation for screen is not supported". after transport i can't see the changes on target sistem. how can i solve this problem?
Thanks

No cross posting
Read the "Rules of Engagement"
Regards
Juan

No stock posting for this material

I have create a material with item category LEIH for returnable packaging,while doing stock posting in MB1C error comes as "No Cmaterial posting for this material".plz help how to post the material.

Duplicated thread no stock posting for this material
Please close this post.
Regards.

Initial Stock Posting for Semi Finished Goods

Dear Friends,
I have a small doubt in Initial Stock Posting.
Is Initial Stock Posting for Semifinished Goods (HALB)?
Or Initial Stock Posting available only for Finished Products?
Please answer this.
Regards,
Rajesh L

Hi,
MB1C + 561 can be used for all of your goods from which you want to keep stock. So, raw materials, SFGs, FGs can be uploaded based on your business requirement.
Your material masters should be extended to the suitable organisational levels (plant, SLoc, WH), so suitable material master views should exist at proper organisational levels.
Regards,
Csaba

Can't listen for connections - Operation not supported

Hi,
We have install OSB Client on HP-UX 11i V2 HP rx5670 Server as per Oracle Secure backup Installation Guide.
But we are getting following error message. Please help us to solve the issue:
2010/12/29.10:23:02 can't listen for connections - Operation not supported
# /sbin/init.d/OracleBackup start
Starting Oracle Secure Backup services daemon.
2010/12/29.10:23:27 can't listen for connections - Operation not supported
Thanks
Khairul/Bangladesh

Have a look at the observiced.log file to see if that has any more detail, this is in /usr/tmp.
I would check to see if there is something else on the system that is using TCP port 400 or 10000. On Solaris I've seen the webmin installation using port 10000. Both those ports need to be free for OSB to be able to start.
With OSB stopped, you can "telnet <hostname> 400" and "telnet <hostname> 10000" to see if it connects. If it does then something is listening on that port.
You should be able to do "netstat -na" as well, to show you listening ports.
Rich

[svn:fx-trunk] 10129: Fix for Multiple @example not supported

Revision: 10129
Author:   [email protected]
Date:     2009-09-10 14:07:41 -0700 (Thu, 10 Sep 2009)
Log Message:
Fix for Multiple @example not supported
QE notes: None.
Doc notes: None
Bugs: SDK-22763
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22763
Modified Paths:
    flex/sdk/trunk/asdoc/templates/class-files.xslt
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

How to perform stock posting for a manually created lot?

Dear Friends
I have a material A for which GRN is made before the inspection type 01 is activated in material master. thus no quality lot is created for the material in qa32.But the material has got an inspection plan
But for 240 units of material, we will have to show in sap that 120 pc is rejected and sent to rejection storage and rest are ok and thus should be sent to ok storage location with 321 mt.
Thus i have created a manual lot in qa01. this lot can be found in qa32. I did result recording for the same. but i am not finding stock posting tab page in UD. please tell me how do I post stock in case?
Thanks
Chandra

Hi
120 pc is rejected and sent to rejection storage and rest are ok and thus should be sent to ok
Stock posting is not possible for manual generated lot.
What you can do you can only post/Create Manual Lot only for OK Qty.
Rejected Qty 120 you can do Return delivery through Unrestricted after GR is made(after 101 mvt)
This is only solution.
or
Cancel original GR.
Activate 01 inspection.
Do GR again
I hope this will help you
Regards
Sujit

Stock posting for rework

Hello All.
After a usage decision has been made to rework all the items in an inpection lot where should I post the material for the rework to occur.
I cannot post it as blocked because order connot backflush from blocked.
Also connot post in unrestricted beacuse fifo will pick from any location and not necessarily the one I want.

Thank you for your response,
I mean to say the material will be usable after the rework.
But after the usage decision is made to rework the items where do I post them to,
so that the rework order created consumes the affected parts and not good stock.
For example if there is one rework order and one standard order for the same item in the same work center,
how do I we know to pick the faulty materials for the rework order and the good material for the standard order.
Can an order be created in one storage location (say welding) to consume stock from another storage location such as quarantine?
Does the material reamain as Q stock until after the rework? If this is the case can an order be created to consume the Q stock and after the rework is complete convert to unrestricted use stock?
Regards,
Chris

Stock posting for recurring

Hi Group,
At the screen of Usage decision I selects the "accept" UD code, then jump on to the Stock posting screen where system is not showing any quantity in the field for Sample posting. And not calculating the sample while i press on the Proposal button.
Pls can any one help me how to resolve it.
Regards,
Shyamal

Arun,
I'm not clear.Are you able to see inspection lot stock tab in UD.If not please check the indicator to insopection lot stock at creation.
The details available are basically Insp lot qty,sample size,qty posted and to be posted.I'm not confident if i answered your doubts but pls get back.Thanks
naik

Quicken for Mac is not supported by Quicken Canada or Quicken US

I had an issue with download my ING Direct transactions into Quicken 07 Mac. When I contacted quicken.com support they asked to contact quicken.ca support. Below is what I received from quicken.ca when I submitted my issue to them:
"I would like to inform you that we no longer supports Mac version in Canada because of the following reasons. If you want support for your existing version then please contact www.quicken.com
Why does Intuit not offer a Canadian Mac product?
Intuit always wants to provide our customers with the best possible end-to-end experience with our products and services. We do not feel that the US Quicken for Mac product will deliver this experience for Canadian users.
Can I use the US version of the product?
There is a US version of Quicken for Mac; however, it does not offer a full feature set to Canadian customers. This product is also experiencing some issues with downloading stock quotes. This is why we recommend our customers use a Canadian version of Quicken for the best product and experience.
Will the windows version of Quicken work on a Mac running XP, Vista or through an emulator?
We have not tested Quicken on the new Mac platform yet so we aren’t sure. We do offer a 60 day money back guarantee if you are not satisfied with the product or it doesn’t work on your system.
Why did you recommend the US product in the first place?
Although there are workarounds and modifications that can be made to the US product so it can work for most users in Canada, we found over time that the experience for our customers was not as good as it is for users of Canadian Windows-based users.
What issues might a Canadian user face using a product geared for the US Market?
· Quicken for Mac is a US product that hasn’t been specifically developed for use in Canada
· Quicken for Mac does not have the ability to print Canadian cheques based on the new standard from the CPA.
· Quicken for Mac’s sales tax functionality is not as flexible as CDN versions of Quicken. Can be more cumbersome than time saving.
· Customers who deal in multiple currencies will not be able to do so in the US Mac version.
· Customers who track their investments in the Mac version are not able to use average cost basis, as required by CCRA
Kavita D
Quicken Product Support
Intuit Canada

Thank you for the information. I currently use Quicken 2002 for Mac and am pretty satisfied with the tracking of personal data. Now I am planning to upgrade to a new iMac and wondering if my Quicken will run on the new machine. I would readily consider buying a new version of Quicken but as you have pointed out, Intuit Canada no longer produces a version for the Mac. Dang!
I'm not sure if a U.S. version would be able to import my data and allow me to carry on. I just want to be able to track bank deposits and chequing, credit cards and loans. I also need to be able to generate transaction reports - Quicken has been excellent for this feature. Downloading of bank account data for reconciliation is nice but not absolutely necessary for me. If anyone knows of an application that I could use in place of Quicken and could import all my old Quicken data, I would like to hear about it.
Paco

Addn to stock flag for putaway strategy not working

Hi
It seems that the flag Addn to stock for putaway strategy in the storage type 103 configuration is not working fine as the quantities of the same material with the same batch sent to the same stype 103, and destination bin are not being added. So by running stock report in WM we see several lines with partial quantities instead of only one line with the total quantity in place. Do anybody know how can that be solved? Or what can be the route cause of the issue? Is there any OSS known applicable to fix the problem?
Thx for your help
Alba

Hi Guys
Unfortunately I do not think that you will get an answer now. Either your question is not simple or we do not know.
So in the interest of keeping the Forum tidy and easier to surf through could you please close your thread and wither try one of the other forums or try another post. I do not think that mosy people will bother to look this far back anymore.
Sorry I cannot help as I would if I could.
Regards
Frenchy.

Setting transaction isolation upon enlistment for XA driver not supported !!?!!?

Hi !
I've been developping a simple webapplication with a few Entity CMP EJB, Struts
and some JSP.
I registred a Pointbase XA JDBC driver in Weblogic 8.1.
When I want to create a new post in the database via one of my EJB, I get "Due
to vendor limitations, setting transaction isolation upon enlistment for "Pointbase
XA" JDBC XA driver is not supported".
What do I have to add in my xml files to make it work ?
Something with <transaction-isolation> in the weblogic-ejb-jar.xml ?
I'll appreciate some help here...
Extract of my code (CustomerEditAction.java):
<<
CustomerHomeLocal chome = (CustomerHomeLocal) Locator.getHome("CustomerHomeLocal");
prop = chome.create(cform.getName(), cform.getAddress(), cform.getZipcode(), cform.getCity(),cform.getCountry(),
cform.getEmail(), cform.getPhone(), cform.getHomepage());
And the error message and stack is:
<<
javax.ejb.TransactionRolledbackLocalException: EJB Exception:; nested exception
is: javax.ejb.EJBException: nested exception is: java.sql.SQLException: XA error:
XAER_RMERR : A resource manager error has occured in the transaction branch start()
failed on resource 'CaciPool - Pointbase - XA': XAER_RMERR : A resource manager
error has occured in the transaction branch javax.transaction.xa.XAException:
start failed for XAResource 'CaciPool - Pointbase - XA': Due to vendor limitations,
setting transaction isolation upon enlistment for "PointBase XA" JDBC XA driver
is not supported. at weblogic.jdbc.wrapper.XA.createException(XA.java:104) at
weblogic.jdbc.jta.DataSource.start(DataSource.java:631) at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1069)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1001)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:203)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:419)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1230) at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1193)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:371) at weblogic.jdbc.jta.DataSource.connect(DataSource.java:329)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:298)
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getConnection(RDBMSPersistenceManager.java:1841)
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.execGenKeyNamedSequenceTableUpdateAndQuery(RDBMSPersistenceManager.java:2392)
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getNextGenKeyPreFetch(RDBMSPersistenceManager.java:2174)
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getNextGenKeyNamedSequenceTable(RDBMSPersistenceManager.java:2147)
at com.caci.ejb.CustomerEJB_6i2zhv__WebLogic_CMP_RDBMS.ejbCreate(CustomerEJB_6i2zhv__WebLogic_CMP_RDBMS.java:5403)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324) at weblogic.ejb20.manager.DBManager.create(DBManager.java:1139)
at weblogic.ejb20.manager.DBManager.localCreate(DBManager.java:1118) at weblogic.ejb20.internal.EntityEJBLocalHome.create(EntityEJBLocalHome.java:171)
at com.caci.ejb.CustomerEJB_6i2zhv_LocalHomeImpl.create(CustomerEJB_6i2zhv_LocalHomeImpl.java:133)
at com.caci.ui.CustomerEditAction.execute(CustomerEditAction.java:58) at
>>
Regards,
Olivier

Hi !
I've been developping a simple webapplication with a few Entity CMP EJB, Struts
and some JSP.
I registred a Pointbase XA JDBC driver in Weblogic 8.1.
When I want to create a new post in the database via one of my EJB, I get "Due
to vendor limitations, setting transaction isolation upon enlistment for "Pointbase
XA" JDBC XA driver is not supported".
What do I have to add in my xml files to make it work ?
Something with <transaction-isolation> in the weblogic-ejb-jar.xml ?
I'll appreciate some help here...
Extract of my code (CustomerEditAction.java):
<<
CustomerHomeLocal chome = (CustomerHomeLocal) Locator.getHome("CustomerHomeLocal");
prop = chome.create(cform.getName(), cform.getAddress(), cform.getZipcode(), cform.getCity(),cform.getCountry(),
cform.getEmail(), cform.getPhone(), cform.getHomepage());
And the error message and stack is:
<<
javax.ejb.TransactionRolledbackLocalException: EJB Exception:; nested exception
is: javax.ejb.EJBException: nested exception is: java.sql.SQLException: XA error:
XAER_RMERR : A resource manager error has occured in the transaction branch start()
failed on resource 'CaciPool - Pointbase - XA': XAER_RMERR : A resource manager
error has occured in the transaction branch javax.transaction.xa.XAException:
start failed for XAResource 'CaciPool - Pointbase - XA': Due to vendor limitations,
setting transaction isolation upon enlistment for "PointBase XA" JDBC XA driver
is not supported. at weblogic.jdbc.wrapper.XA.createException(XA.java:104) at
weblogic.jdbc.jta.DataSource.start(DataSource.java:631) at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1069)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1001)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:203)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:419)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1230) at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1193)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:371) at weblogic.jdbc.jta.DataSource.connect(DataSource.java:329)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:298)
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getConnection(RDBMSPersistenceManager.java:1841)
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.execGenKeyNamedSequenceTableUpdateAndQuery(RDBMSPersistenceManager.java:2392)
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getNextGenKeyPreFetch(RDBMSPersistenceManager.java:2174)
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getNextGenKeyNamedSequenceTable(RDBMSPersistenceManager.java:2147)
at com.caci.ejb.CustomerEJB_6i2zhv__WebLogic_CMP_RDBMS.ejbCreate(CustomerEJB_6i2zhv__WebLogic_CMP_RDBMS.java:5403)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324) at weblogic.ejb20.manager.DBManager.create(DBManager.java:1139)
at weblogic.ejb20.manager.DBManager.localCreate(DBManager.java:1118) at weblogic.ejb20.internal.EntityEJBLocalHome.create(EntityEJBLocalHome.java:171)
at com.caci.ejb.CustomerEJB_6i2zhv_LocalHomeImpl.create(CustomerEJB_6i2zhv_LocalHomeImpl.java:133)
at com.caci.ui.CustomerEditAction.execute(CustomerEditAction.java:58) at
>>
Regards,
Olivier

Stock Posting for Previous Period

Hi all,
In case, there is a need to update stock for previous period (Stock Transactions: Initial Quantities Stock Tracking and Stock Posting /Stock Posting List ) e.g. Update stock at 31/12/08 where there are stock movements within 2009, there is a System Message : Item quantities are not updated for initial entry of stock balances date, Update Now ?Yes , No, Cancel
How we activate this message, in case that does not appear?
Thanks in Advance

Check this WIKI
[How to update stock quantities according to a previous date?|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=25494266]

Adobe Reader for Blackberry Does Not Support Fillable Forms

I've discovered that the version released for Android does support fillable forms, but the version for Blackberry does not. I assume Blackberry did not develop the app so what gives?

Mehwish,
Thank you so much for responding, and so quickly. I appreciate it.
It does not appear as though the PDF I am trying to read would have an element in it that would block it from reflow, but that is always possible. It’s a textbook, and I understand that toward the end of the book there are some charts and diagrams, but I haven’t gotten to those chapters yet. So far, I’ve just been trying to use the Adobe Reader to read the introduction and first chapter and nothing I have done has made it reflow.
I’m enclosing a copy of the entire book. Perhaps you can uncover something in it that I didn’t see.
Thanks again for you help.
Stan
Dr. Stan G. Duncan
123 Sumner St.
Quincy, Massachusetts 02169
617-855-7539 (hm)
781-504-6875 (cell)
215-647-7583 (fax)
508-295-1630 (Ch)
<mailto:[email protected]> [email protected]
<http://homebynow.blogspot.com/> http://homebynow.blogspot.com
<http://www.huffingtonpost.com/stan-duncan> http://www.huffingtonpost.com/stan-duncan

Stock posting for lot 010000000121 not supported

Similar Messages

Maybe you are looking for