Stock Posting  for Previous Period

Hi all,
In case, there is a need to update stock for previous period (Stock Transactions: Initial Quantities Stock Tracking and Stock Posting /Stock Posting List ) e.g.  Update stock at 31/12/08 where there are stock movements within 2009, there is a System Message : Item quantities are not updated for initial entry of stock balances date, Update Now ?Yes , No, Cancel
How we activate this message, in case that does not appear?
Thanks in Advance

Check this WIKI
[How to update stock quantities according to a previous date?|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=25494266]

Similar Messages

  • Stock Values for previous period on batch number

    Need to show report which shows stock value and levels on a certain period (previous) by batch numbers.
    Report MMBE shows current stock levels per batch.
    Report MB5L shows stock value on a certain period (previous) but with no batch information
    Is there any standard reports which you can see all stock values and levels for the previous period on batch?
    Thanks

    Hi,
    Good morning and greetings,
    Please go through the following link
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/25/2839124f7811d18a150000e816ae6e/frameset.htm
    Please reward points if found useful
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • Stock in Transit quantity by batch for previous period

    Hi all,
    Is there any way to get the information of stock quantity for stock in transit by batch for previous period?
    In standard SAP system, when the stock is issued with reference to STO with movement type 641, the stock will be stored in the system as stock in transit.  As the stock is sit at plant level, the standard SAP report does not show what batch was issued.
    I have a requirement to display stock value of previous period down to batch level.  Hence, SIT of what batch of previous period should also be displayed.
    Any idea of how this can done, or any workaround solution?
    Thanks.
    Tom

    MB5T lists the difference between delivery goods issued and goods receipt to your POs, as so called virtual stock in transfer
    MB52 lists the stock in transfer that had been done with inventory managment movements and was updated to MARC table.
    you have to find the movements (use MB51) that posted the stock that you can see in MB52.
    see info in OSS  Note 982345 - FAQ: stock overview MMBE

  • Posting stock entry in previous period

    Dear Friends
    Can anyone pls tell, whats the how  to post stocks in previous period.? Eg: previous month or previous quarter.
    Rgds
    Sumanth.Gururaj

    Please refer following links-
    - [Posting to a Previous Period|http://help.sap.com/saphelp_46c/helpdata/en/47/6102e749f011d1894c0000e829fbbd/frameset.htm]
    - Stock In Previous period
    - Post in previous period
    Hope this can assist you.
    Thanks & Regards
    JP

  • Allow posting to previous period only for invoices (only invoices).

    Hi gurus,
    We want to cancel invoice document s(MR8M) with the same date that the invoice was created (previous period). We know that we can use MMRV transaction for this but MMRV will posting of all MM documents, whereas we need to restrict posting  to previous period only for invoices.
    It´s possible? Can you please help on this with complete steps?
    thanks!!!

    I don´t know if there is a better way to do that, but you could flag the field "Allow Posting to Previous Period" in MMRV and configure the posting date in all the transaction (MIGO, MIRO, MB1A,MB1B, etc) for only display except MR8M transaction.

  • Manual postings to PCA for previous periods seems to get posted twice

    Dear All,
    Actual postings to PCA are performed manually using a custom job from SA38. Postings were made in FI for all previous (closed) periods . After running those jobs for previous periods to transfer those entries, some companies and accounts are showing duplicate amounts or just a balance on comparison ledger and not in base ledger. How to correct this.
    Thanks a lot for your help

    Hi
    You will have to use 9KE0 or a custom job again to rectify this
    Ajay M

  • Allow Posting to Previous Period - MMRV

    Dear Friends,
    We can open / close MM periods thru MMPV & see the currently open periods thru MMRV.
    Now when we check current Period in MMRV, we see three periods:
    Current period                 07 2009 (October 2009)
    Previous period               06 2008 (Septermber 2009)
    Last period in prev.year  12 2008 (March 2009)
    Here we have also Allowed posting to Previous Periods.
    Thus current open period is 07 2009 (October 2009) & we can also post in Septermber 2009 (06 2009).
    But the real problem is can we post some MM Documents in March 2009 (i.e. 12 2008)? Currently when we try system gives error - Posting only possible in 07 2009 & 06 2009.
    I know it is SAP standard to allow only two MM months to be open at a given point of time.
    Then what is the use of "Last period in prev.year  12 2008" in MMRV screen?
    Waiting for early replies...
    Thanks,
    Jignesh Mehta

    In SAP system, you can only post stocks to one back period only by checking the Check Box in MMRV Transaction.
    The entries you mentioned (Current Period, Previous Period, etc. are just information purpose only.
    In certain cases, for ex: changing valuation Class etc., you have to check the stocks in Current, previous period and last period in previous year.
    So you can get information of periods in MMRV Transactions.
    For back posting to other periods (other than previous period), you should use Transaction MMPI.

  • How to change the posting date in UD stock posting for a HU managed item?

    Hi,
    We are using Handling Unit managed items with QM activation. For a specific HU managed material, we wanted to post the stock on a previous date. We have created PO on a back date and made GR also on a back date. Now the problem is, the system has generated an inspection lot. Now while trying to do UD and stock posting, I do not see the "Doc" tab which we normally see in UD stock posting for normal inspection lots (non-HU managed items) for changing the date.
    I don't see any other way to change the posting date for the HU managed item in UD stock posting. Anyone can help please?
    Thanks & Regards,
    Madhavan Krishnamoorthy.

    I don't think you can.
    Craig

  • "lock" values of tax depreciation for previous periods

    Hi all,
    is it possible to lock calculated values of depreciation for previous periods? We need it for the case when e.g. depreciation key is changed. Then we want preserve the values for previous periods and change only the future values. But please note that we want this for depreciation area, which does not post values to GL.
    thanks
    Zbynek

    Hi,
    It did not work for me. I changed the useful life from 30 to 20 yrs and then used menu path Edit/Recalculate values. Then I used the Tx S_ALR_87012936 to display the depreciation values for individual months. But all the values were the same, i.e. the values for previous periods were not kept.
    So is there a way to keep these values?
    thanks,
    Zbynek

  • Allow posting to previous period (Backposting) in MM period close

    Hi,
    Does anyone know the implications/consequences of allowing posting to previous period (Backposting) when doing MM period closing?
    Thanks.

    Hi Irene,
    We need to close posting period in MM module to allow posting in new posting period. However, if there are still some transactions need to be posted for the just closed period, we allow posting for closed period as well.
    However, we can allow postings only for one previous period in MM. We can't post to earlier posting periods.
    After all the transactions get posted in initial days of new posting period, we can close previous posting period in FI. Automatically system will not allow posting for MM transactions that has financial implication.
    Hope this helps
    Cheers,
    Som

  • Can we run KSU5 - Assessment Cycle execute for previous periods

    Dear Gurus,
    Can we run KSU5 for previous periods.  Means I have not ran from April 2008 onwards.  Can I run right for all periods.  Any inconsistencies arises for running the KSU5.
    Please guide us.
    Regards
    Srinivas

    Hi Srinivas,
    You can run the Cycle for previous periods also using KISR transaction code. Here, you can select the processing period (previous period) and posting period (current period) and the Cycle and the Segments.
    Note: If you want the postings to happen in the same corresponding processing periods, you need to check those periods to be open and consider other inconsistencies also.
    Pls revert back for further assistance...
    Srikanth Munnaluri

  • Opening Balances for Previous Periods

    Hi Experts,
    There is a client requirement of entering opening balances for GL for previous periods before going live.
    eg it is required to have OB for 2006,2007 and 2008 before live transactions are entered into the system.
    Please enlighten on how to carry out this.
    Regards,
    Asap

    Hi Asap,
    You could only have one OB for one account.  If those OB for different years are for different accounts, it is ok.  Otherwise, you have 2006 OB only. You may create JE to get something like OB for 2007 and 2008.
    Thanks,
    Gordon

  • Vendor evaluation report to be run for previous period

    Hi,
    Is the possible to run the Vendor evaluation report for back date.
    i.e. if the period of evaluation is 30 days, can we run the report for previous periods
    Regds,
    Ritesh

    Depending on the library you are using, can you verify whether you can use one of the following variables?
    1PERIK   
    1PERW   
    5ACPERI  
    6-PERIK  
    8WPERIO
    All these variables use fiscal periods and not calendar periods, that way you don't have to bother about number of weeks in a period, unless you really need to do the calculation based on number of days in a period.
    If your library does not support these variables, then pl copy one of these variables (GS11) with appropriate details into a custom variable and use it in your report.
    Let me know.
    Regards
    Subodh

  • No stock posting for this material

    I have create a material  with item category LEIH for returnable packaging,while doing stock posting in MB1C error comes as "No Cmaterial posting for this material".plz help how to post the  material.

    Duplicated thread no stock posting for this material
    Please close this post.
    Regards.

  • Stock posting for lot 010000000121 not supported

    Hi Experts,
    I am unable to reverse the UD and stock by using SAP NOTE 175842.
    By using std program RQEVAC50 activated ZQM_RQEVAC50 and given the transaction code.
    When I runn this T Code System is giving error massage "Stock posting for lot 010000000121 not supported"
    Cross Checked all parameters find below
    1) For movement type 322 and 349 assigned T Code QA11 and QA12
    2) Posted stock available in same storage location
    3) Lot 10 qty posted to unrested qty 10 and lot status is " UD ICCO SPCO STUP "
    4) Material Not serial managed
    Pls tell me the reason why it is not happening
    Thanks
    Shiva Patil
    Edited by: SHIVA PATIL on Jan 15, 2010 4:10 PM

    Resolved

Maybe you are looking for

  • Why is my mbpro mic better than my usb

    I bought a decent plantronics usb microphone - but people keep on telling me the mac mic is better, when they talk to me online. Does anyone know why this is - been through a bunch of usb mics and this is usually the case.  It's annoying because it m

  • Audio line-in input won't work

    Hello, have used Garageband several times in the past, and have had no problems setting the input as audio line-in to record my guitar. However, I tried again for the first time in a couple of years the other day and neither my Powerbook or my iMac w

  • Dell Locks up?

    My machine has constant Display driver errors after the machine runs for a while my display starts to flicker and some times it just locks up the whole machine and I can't do anything but unplug the machine to reset the problem? I can't do a ctrl-Alt

  • Client Copy and Configuration of Integration Server

    Hi All, We have PI 7.0 DEv(ABAP and JAVA) system installed on AIX 5.3 and configured client 150 as Integration Server. Further we have an requirement for two more clients to be created by client copy    For example : Say 160 as Unit test and 170 for

  • MRP PR Report T code

    Dear All, i want T code for  automatic PR generation(MRP PR) report.