Stock posting for warehouse managed plant

Dear All,
Our plant is warehouse managed.
I am unable to post the stock using 561 or 501 Movement types.
How to post the stock if the plant is warehouse managed?
Is there any spcial indicators available?
Kindly suggest?
Mullairaja

Hi,
I think, my question is not phrased well.
My question is, if the plant is warehouse managed, do we need to use different movement types to post the stock?
Because, I was unable to post the stock using the movement types 561 or 501.
Please clarify.
Regards,
Mullairaja

Similar Messages

  • How to change the posting date in UD stock posting for a HU managed item?

    Hi,
    We are using Handling Unit managed items with QM activation. For a specific HU managed material, we wanted to post the stock on a previous date. We have created PO on a back date and made GR also on a back date. Now the problem is, the system has generated an inspection lot. Now while trying to do UD and stock posting, I do not see the "Doc" tab which we normally see in UD stock posting for normal inspection lots (non-HU managed items) for changing the date.
    I don't see any other way to change the posting date for the HU managed item in UD stock posting. Anyone can help please?
    Thanks & Regards,
    Madhavan Krishnamoorthy.

    I don't think you can.
    Craig

  • Stock posting for lot 010000000121 not supported

    Hi Experts,
    I am unable to reverse the UD and stock by using SAP NOTE 175842.
    By using std program RQEVAC50 activated ZQM_RQEVAC50 and given the transaction code.
    When I runn this T Code System is giving error massage "Stock posting for lot 010000000121 not supported"
    Cross Checked all parameters find below
    1) For movement type 322 and 349 assigned T Code QA11 and QA12
    2) Posted stock available in same storage location
    3) Lot 10 qty posted to unrested qty 10 and lot status is " UD ICCO SPCO STUP "
    4) Material Not serial managed
    Pls tell me the reason why it is not happening
    Thanks
    Shiva Patil
    Edited by: SHIVA PATIL on Jan 15, 2010 4:10 PM

    Resolved

  • Initial Stock Posting for Semi Finished Goods

    Dear Friends,
    I have a small doubt in Initial Stock Posting.
    Is Initial Stock Posting for Semifinished Goods (HALB)?
    Or Initial Stock Posting available only for Finished Products?
    Please answer this.
    Regards,
    Rajesh L

    Hi,
    MB1C + 561 can be used for all of your goods from which you want to keep stock. So, raw materials, SFGs, FGs can be uploaded based on your business requirement.
    Your material masters should be extended to the suitable organisational levels (plant, SLoc, WH), so suitable material master views should exist at proper organisational levels.
    Regards,
    Csaba

  • No stock posting for this material

    I have create a material  with item category LEIH for returnable packaging,while doing stock posting in MB1C error comes as "No Cmaterial posting for this material".plz help how to post the  material.

    Duplicated thread no stock posting for this material
    Please close this post.
    Regards.

  • Extractors for Warehouse Management

    Is anyone aware if there are any extractors for Warehouse Management.  I am working on a Retail project? Thanks

    Hi,
    Check these links would help you,
    BW Retail content
    Re: BW retail content
    Re: BW IS Retail
    With rgds,
    Anil Kumar Sharma .P

  • BPP for warehouse management

    Can anybody gives the BPP for warehouse management. and also qand db for the same

    HI Ram,
    could you pls forward the same to me also...my id is [email protected] / [email protected]
    thnx..
    SOUMYA

  • What are all the Standard Data targets&Data source for Warehouse management

    Hi,
    What are all the Standard Data targets & Data source for Warehouse management.
    Thanks,
    Ahmed.

    HI,
    the master data
    1.equipment data --IE01
    2.All functional locatiions -IL01
    3.Maintainnace work centers - IR01
    4.Task list data - IA05
    4.Schedule maintanence plan
    6.Strategies
    7.Measuring points
    8.Characters for calibration
    9.Equipemnt BOM
    10.Material BOM
    Regards,
    Anddra

  • Metalink Note for Warehouse Management System Testcase Repository

    Hi Friends,
    Please share the meatilink note id for Warehouse Management System Testcase/ Testscripts Repository.
    Thanks and Regards,
    A

    if you have open transactions, such as deliveries, then you may not be able to process them further.
    But do you really close all transactions in a test system?
    It will not have any harm to new created documents

  • Invoices Posted for a material plant combination

    Hi Experts
    I need to get the list of invoices posted for a material-plant combination.
    Is there any reports available or which table i can check this?
    Thanks
    Raja

    Hello Raja,
    Use the table RSEG  - Document Item: Incoming Invoice
    Fields:
    BELNR - Accounting Document Number
    GJAHR - Fiscal Year
    EBELN - Purchasing Document Number
    EBELP - Item Number of Purchasing Document
    MATNR - Material Number
    WERKS - Plant
    Regards
    Gregory Mathews

  • Stock Posting for Different Plants

    Hi MM Gurus,
    Is it possible to post directly to a Work Order reservation from a different plant?
    Example: A WO is raised and a reservation created for plant A and we want to move stock
    from plant B and post it directly against the reservation. Is there a one step process?
    Thank you,
    Jograd

    Hi,
    If you wish to do that, then open the production order, go to components tab, change the plant & sloc details in the component tab & save. Now you can post from the other plant directly via MB1A or MIGO or co27 with 261 mvt. If
    Hope it answers your query.
    Regards,
    Vivek

  • Help..Problem GI for Warehouse Management

    Dear Expert,
    I have a problem for GI process in warehouse management. When  there are stock transfer material sloc non WM to sloc WM , user have to create transfer order and confirm transfer order to place material in storage bin. Otherwise, if user didn't create transfer order, material will stay in Storage Type 998 (AUFNAHME).
    If there are GI process after that, for example GI to cost center, user still can issue material from Sloc even material hasn't placed into storage bin. Then material issued will stay in Storage Type 911 (GI Area for Cost Center).
    Question is...how can i clear Storage Type 911 (GI area for Cost Center) after GI process??Is there any way i can restrict GI process so that user can't issue material which hasn't placed into storage bin (still in AUFNAHME)???
    Help me please...
    Rgds,
    Aleluya.

    First of all:
    It's strange that storage type 998 is used in your system for GR in transfer posting process - it is used for initial stock upload in standard system. Interim storage type 921 is used for SLoc-SLoc transfer posting.
    Is there any way i can restrict GI process so that user can't issue material which hasn't placed into storage bin (still in AUFNAHME)???
    In standard system not. Maybe through development you could do a check whether there're open TR for the material in connection with the interim storage type or you could check the quants for the interimn storage type...
    But I think and strongly recommend you should not do this.
    The process in SAP (process in ERP) and the physical process (moving the goods physically) should go paralelly. So, my opinion is that you should find out why the goods are not placed in storage bin in SAP whilst they are already in the bin physically. Maybe workers need training / workers have to keep to the rules / you have to revise the process/ use RF devices / etc.
    Question is...how can i clear Storage Type 911 (GI area for Cost Center) after GI process
    You can solve it (e.g.):
    1. Manually, in the sort run: you move the suitable quant from the interim storage type used for SLoc-SLoc stock transfer (921) to interim storage type 911 by LT01 / LT10 (because you should have a +quant in 921 and a -quant in 911).
    2. In the long run: e.g. you can set TR creation for your movement type and processing those TRs (from LB10) you will get the TO and realize the goods movement.
    SPRO > LE > WM > Interfaces > IM > Define Movement Types > LE-WM Interface to Inventory Management
    3. Immediate TO creation for these postings. Please sea OSS note 136796 if you are interested in this solution.
    Regards,
    Csaba
    Edited by: Csaba Szommer on Jan 3, 2010 6:10 PM

  • T-codes for warehouse management

    hi.
    can anybody gives the mostly used t-codes for warehouse management

    SAP WMS - Decentralized Warehouse Management System Integration Setup
    You can operate the SAP Warehouse Management System (WMS) as a stand-alone decentralized system that is independent of a central Enterprise Resource Planning (ERP) System.
    You make the necessary settings for the ERP (Enterprise Resource Planning) system within the WMS component (Warehouse Management System).
    The steps are set up as a checklist and guide you through the process of configuring the system parameters.
    Checklist (For those with the Table Views used transaction code SM30).
    1. Customizing for "Enterprise Structure"
    - Create storage location in OX09 (if necessary).
    - Define warehouse number in Views V_T3001.
    (you should not copy the warehouse number in the ERP system)
    Activities within a warehouse, like goods movements and physical inventory, are assigned to a specific
    warehouse number.
    The physical warehouse where these activities take place is identified by the warehouse number.
    - Assign plant/storage location to warehouse number in Views V_T320.
    (Valid if the component MM-IM (Inventory Management) is implemented.)
    Fields : Plant + Sloc + WhN
    2. Customizing for "Decentralized WMS integration", section "Central processing" -> Application
    - Activate decentralized WMS in Views V_T340DM.
    - Define interface to Inventory Management in Views :-
    V_156S_WM - Assign WM movement type references to IM movement types
    V_T3211 - Delivery-Relevant Parameters for Reference Movement Type
    V_T340DL - Delivery-Relevant Data for Warehouse Number
    - Exclude stock in decentralized WMS in Views V_T321B
    (if the decentralized WMS is not an SAP R/3 system)
    - Finally do a consistency check for decentralised WMS in transaction OL20.
    3. Customizing for "Application Link Enabling (ALE)", section "Basis Components"
    Maintaining Logical Systems in Views V_TBDLS.
    Assign logical system to client in Views T000.
    4. Make basic settings for RFC in transaction BD97.(if necessary)
    5. Customizing for "Application Link Enabling (ALE)", section "Maintain Distribution Model"
    You can define the Reduce message types and Activate message types in transaction BD53.
    SAP recommends that you use message types :
    "MATMAS" (material master tables) and
    "DEBMAS" (customer master) as a template.
    Be aware that only those fields that are absolutely necessary are transferred from the master data tables in
    the ERP system to the decentralized WMS.
    6. Customizing for "Decentralized WMS integration", section "Central processing" -> Distribution
    Use transaction OL19 to generate distribution model. As far as the application is concerned, when the model
    is generated, application-specific Customizing parameters are modified or set (for example, activate
    decentralized WMS).
    Display or check distribution model
    Generate partner profile in transaction BD82.
    (you can also perform this activity using ALE Customizing)
    Distribute distribution model in transaction BD64 (model view) using menu item "Edit"
    If both the ERP system and the decentralized WMS are SAP R/3 systems, the distribution model should be
    distributed on a central basis only, that is, via the ERP system.
    7. Customizing for "Application Link Enabling (ALE)", section "Maintain Distribution Model" (transaction BD64)
    Activate the change pointers for master data distribution using transactin BD61.
    If necessary, reduce the message types concerned with transaction BD53.
    8. Customizing for
    "Logistics - General" - "Material Master" - "Tools" - "Data Transfer : Material Master" -
    -> "Define required-field check for ALE/Direct Input" (Views V_T130S)
    Define whether an error message should be generated in the receiving system for required fields
    from the material master.
    Reward points if useful.

  • Master data for warehouse management

    Hi experts what are the master data for the warehouse
    management module.............

    Hi
    Sending you all the table for the warehouse mangement.
    Inventory document
    IKPF Header: Physical Inventory Document
    ISEG Physical Inventory Document Items
    LINK Inventory document header in WM
    LINP Inventory document item in WM
    LINV Inventory data per quant
    Storage locations and stocks
    LAGP Storage bins
    LEIN Storage unit header records
    LQUA Quants
    LQUAB Total quant counts for certain strategies
    MEIK Make-to-Order Stock for Customer Order
    MSCA Sales Orders on Hand with Vendor
    MSKA Sales Order Stock
    MBPR Stock at Production Storage Bin
    MLGN Material Data per Warehouse Number
    MLGT Material Data per Storage Type
    Rewards if useful.
    with regards
    Nikunj Shah

  • Bare minimum configuration for warehouse management

    Hello,
    For one of our Projects, there is a requirement of Warehouse Management merely just to enable the tracking of Material received to the Storage Bin level, as they manage the Inventory in Storage Bins in the existing Warehouses.
    Other no major requirement is expected from WM like, automation of Putaway, etc.
    Few of the Inventory scenarios are like Goods receipt, Goods Issue, Warehouse to Warehouse transfer, Bin to Bin transfer, Physical Inventory,  Subcontracting for repairs, Vendor Consignment, also they will handle Project Special stock.
    Now the configurations for Inventory Management are enabled for all the above processes. I now need to know, what are the bare mimimum configurations required so as to enable the WM related process, following each of the IM processes, like Putaway after Goods Receipt, Stock removal before Goods Issue, etc.
    The Configuration for the Enterprise Structure to support Warehouse Management have been completed by creating the Warehouses & assigning the Storage locations to these Warehouses.
    A detailed step by step process would be very helpful for me at this stage.
    And i surely will assign points for all the useful answers.
    Regards,
    Zafar.

    Hi,
    If you want to define new storage types other than the standard ones, please define them. Otherwise, you can assign
    the existing storage types to the newly defined warehouse.
    Also you have to define storage bin types and storage bin structures.
    All this you can find under the IMG path:
    SPRO->Logistics Execution->Warehouse Management->Master Data.
    Regards,
    Pavani.

Maybe you are looking for