Stock Reached Minimum Level Want Remainder

HI Experts,
I am using sap b1 9.0 PL 0. I want to know in detail about the Inventory Module.In that i want the remainder when my stock is getting to minimum level then i want the remainder or intimation in my system.Please help me out.
Thanking you,
Ganeshkumar.J

Hi
First enter minimum quantity on item master.
then Go to Administration->Alert Management->Minimum Stock Deviation
Active this alert .
and check this
Inventory Alerts
Stock Deviation Minimum Alert | SCN
SAP B1 Required Inventory
Low Inventory Alert
Thanks
Mohammad Imran

Similar Messages

STOCK REACHED MINIMUM LEVEL THEN NEED REMAINDER FROM SYSTEM

Hi Experts,
Actually i want when the stock reached minimum level then we need to get the remainder or intimation fro the system.
I want in detail about this question. i gone through google also but i m not getting correct solution for this.
Thanks,
Ganeshkumar J

Hi Kumar,
You have posted two thread please closed this duplicate thread.
Thanks
Mohammad Imran

Maintaining Stocks at WM Level

Dear All,
I have a request from the business whether we could maintain stock at WM level without account assignment. That is stocks are GRN in IM Level with account assignment and when it comes to WM level the stocks should not be based on Account Assignment.
From the system behavioural pattern i believe this is not possible, the reason they are insisting on this is due to the following factors.
1. Our industry is Apparel and with regard to Raw Materials like fabric our present practical scenario is such that we GRN stocks in IM based on Sales Order / Line item. So for eg:
PO/LI    - Material A - 200yds - SO/LI1 ( SU 1, SU 2)
PO/LI2 - Material A - 100yds - SO/LI2 ( SU3)
So when the GRN is done the stocks are allocated for the respective Sales Order / Line items. Physically we have three SU (100 each) satisfying the two Sales Order/ line items. So when the user wants to issue for a production order he has the flexibility to select either of the three SUs to satisfy SO/LI1 or SO/LI2 (without the WM system in place)
With WM in place the storage units would be allocated for the respective sales order / Line items as shown above SO/LI1 (SU1 & SU2) & SO/LI2 (SU3). Now the user does not have the flexibility to issue SU3 for SO/LI1.
( The reason the business follows this practice is due to the fact that the product (Fabric) has quite a lot of characteristics such as Width, Shrinkage, Shade so only after the inspection process do they know which SU satisfies which SO/LI.
How do we overcome an issue like this, since at the point of GRN ( MM & WM) we cannot gurantee the correct SUs are getting allocated for the correct SO/LI. As a temporary measure i am doing an MB1B (413) process to switch SUs between SO/LI. Is there any other way i could mitigate this issue,
2. The second issue is during stock counts
   Since with WM in place all the SUs will be specific to Sales Order / Line items but when the stores do a stock count they do
   based on material / SU alone and are not aware how much yardage is available for SO/LI at Storage Unit Level. Thus the
   continous inventory process breaks the stock at SU ( SO/LI Level). Do i have to create a seperate ZPROGRAM to facilitate the
   stock count process or is there any way i could do a continous count for material & SU without taking into account the SO/LI.
Hope my queries are clear, would appreciate a response
Thanks
Shabeen Buhary

Hello,
Based on my understanding . You are receiving goods with "E" stock ( special stock indicator). This E indicator comes with sales order number and line item will be stored( ex: E '151'000020) in the IM and WM stock. (you can see this in LS26/MMBE once you receive).So you canot issue this item for another line item of the same order. Coming to the questions you raised
1. "whether we could maintain stock at WM level without account assignment?".
What ever comes from IM will be the same in WM. So you can not change the stock indicator value only in WM while issuing goods to a specific on hand orders with "E" indicator. I hope you should do a process change either in SD/IM area than in WM. Because you said that "product (Fabric) has quite a lot of characteristics such as Width, Shrinkage, Shade only after the inspection process do they know which SU satisfies".
and So when you are creating a sale order of that kind you should have either not having the specific purchase( E stock ) or should have a BATCH with characteristics. OR you should transfer the stock to quality for quality inspection and then make available for issue. Either way you need to see this issue beyond WM level because this is a process of (SD/IM/FI) cross function.
2. "is there any way i could do a continous count for material & SU without taking into account the SO/LI.?".
I hope NOT.
I could not understand yardage problem while counting.i don't know if any physical material handling problem in warehouse will intern effect of your continuous counting.
I Hope looking more options in Batch/quality/sales order areas will certainly help you..... thanks
tkreddy

How to upload the batch stock to bin level

Dear gurus
My client are going to implement WM i want to know how to upload existing batch stock to bin level.
regards
sam
Edited by: Csaba Szommer on May 25, 2011 12:10 PM

Hi,
You can use LSMW for Tcode LT01 to upload inital stock in WH.
So here u can enter all relevant data required like material, qty, batch, plant, Sloc etc..
Hope this helps you...
Rgds,
Kris.

STOCK at Sloc level

Hello All,
Need some guidance
I wanted to check Stock at Sloc level , with input as Material code ,Company Code and G/ L code
Pl suggest if any T Code can help in this
Thanks & Regards

Hi ,
Thanks for response ,
but i have tried both ,
MB5L : doesnot have Sloc as input ( as its not val area )
MB5B : Doesnot have G/ L for input
so it becomes very dificult to add up both
Pl help
Thanks & Regards

What is the T-code to see the stock at tank level?

What is the T-code to see the stock at tank level?
Regards
S.Senthil

Hi Senthil,
                In Order to Overview the stock at tank level do the following:
            1. Tcode-   O4_TIGER
            2. In the screen launched set the 'Transaction' Field as 'Stock Overview'.
            3. In the 'Pre selection' frame, enter the Storage Location and the Seq. No (Tank ID) details
            4. On execution you will get to see a Report. Refer to the 'Corr. Book Stock' column for the available stock.
            5. If there are more than one materials assigned to a tank. Click on the line item of the Report to see the break up materialvice.
P.S: To fine the seq No of the tank use tcode 'O4NA'.
Please let me know if this has helped you.
Regards,
S. Satish

Stock at BOM level

Dear all ,
I have a bOm for FG containing 45 components , can i check the stock at all BOM levels in SAP ?
Creating Varient and getting stock in MB52 is ok but every time for new assembly i can not create varient .
Whr can i get Stock at BOM level ?
Regards

hi
i don't think so we have this option,
better way is go with your idea
-ashok

Stock at plant level

Hey,
Is it possible to have stock at plant level. Or do you always need a storage location?
Steven

Hello,
When you have a record in MARC for a certain material plant combination, but no record in MARD for that combination then it means that for the material no stock is possible at storage location level.
If you have a entry in MARD table means for that material you have stock at plant / Storage location level.
But incase if material is provided to subcontract ( Vendor ) then this stock will not be at storage location level but it will be at plant level.
e.g. - total 1000 qty
100 - provided to vendor for subcontracting
800 - stor. A
100 - stor. B
Then in MARD you will get only 900 qty and not 1000 qty
Regards,
Shailesh

Checking of maximum & minimum levels of stock with error on 103 mvmnt gate

Can anyone help me how to do settings in SPRO or is there any user exit, to stop entries at gate (103) MIGO when maximum level of stock is already defined at MRP1 menu.
Thanks
SK Daniel

@Diaz, the bug has been reported in Ubuntu here:
https://bugs.launchpad.net/ubuntu/+sour … bug/879858
It may be worth following it. Also it would be nice if you mark it as it affects you, to increase it's priority.
Also there's a way to improve boot procedure:
1) Create a file startup.nsh in your /boot/efi with the following content:
fs0:boot
2) Create a file called "boot.nsh" in /boot/efi with the following content:
fs0:
cd \EFI\ubuntu
grubx64
This will reduce boot procedure to just <F2> <left> <up> <enter> <enter>

T.code for checking stock at WM level

Hi Gurus,
I want to check the warehouse stock at Storage type level in previous week,Can any one give me T.Code where we can satisfy this requirement
Regards
Narayana

Narayana,
There is no std SAP WM report which will show you this. I will take some calculating to get a total for all movements for a material/ST/Bin/etc. I did it in excel and it took some time, but I'm sure you could write a basic query / ABAP report to get this.
Good luck.
Hein

Calculate stock reach based on MRP data by date

HI
I have a challenge that I'm unable to solve by myself - I hope you guys can help me out:-)
I have an ODS containing current stock and expected future movements of different types. In the ODS I have (simplified):
1) Material
2) Date of movement
3) Type of movement
4) Quantity (with +/- sign)
I need a query that will return for each material (in the rows) either the date when the stock will reach 0 or the number of days until that movement occurs.
My ODS could hold the following data for a material:
Mat date     Type      Qty:
1                  Stock      +100
1       01.01 Sales         -20
1       05.01 Sales         -70
1       10.01 Sales         -50
In this example the query should return "10.01" (which is the date we will run out of stock) or the number of days between today and that date.
I have experimented with the "cumulated" option and conditions in kfy definition in query designer, but since cumulation is only for display I can' use that.
I can't build a cumulated value into the model either, because there are several movement types and sometimes the user needs to only take some of them into consideration.
Since consumption is very non-linear I need the exact date we run out and I can't base calculations on average data (like average daily sales).
Does anybody have an idea how to solve this?

Post Author: Tned
CA Forum: Desktop Intelligence Reporting
Thanks Prashant
However, when i add either the status or condition variables to the report all lines related to the ID are returned not just the last entery by date.
Thanks again.Terry

SAP tables for stocks at warehouse level

Hi
Can anyone let me know which are tables for the stocks which are maintained at the warehouse level.
sunil

LQUA

How to block Gr if the stock reaches the maximum limits

Dear All,
Is there any way so that the system will automatically Block the GR while doing MIGO when the stock of the given material has crossed the maximum limit.
Regards
Om Prakash Gupta

Hi,
If you want to restrcit any specific material stock quantity, it means some where you need to maintain the Stock limit for that purpose you will have create a Z table whene in you will maintain sthe maximumstock limit and then with the help of user exit in PO or MIGO you can validate it with the Z Table stock . Z table for stock quantity can consider stock incremental aginst each PO and GR .
Take ABAPer's help
Regards,
Vikas

Stock below defined level message

Hi,
I have a requirement from a client to display a message on screen when the stock of a material falls below a user-defined level, can anyone advise if there is a way of achieving this using standard SAP? Perhaps something similar to the MRP exception message that is displayed when safety stock is below the defined level.

Hi,
I assume that you need this in order to find out when you are running out of stock, if this is the case you may try to use MD07 that will show you how many days of stock you have in the plant based on your issues.
Kind regards,
Federico.

Stock goes min, level warning msg using Dy. Avl. Check

Dear,
With OMCP - created new checking rule and Defined checking rule combination 01 & 02 - new checking rule. Material master Checking group assigned as 02. Material master entered some quantiity Safety stock. Set movementy type for Warning message (A).
Similar created for Reservations. But system not throwing Warning message even quantity not available (i.e issue quantity = un.res stock - safety stock).
What could be the reason, does I am missing something??? Pls suggest.
Regards,
Syed Hussain.

Solved... Thank you.

Stock Reached Minimum Level Want Remainder

Similar Messages

Maybe you are looking for