Stock removal FIFO in storage types
Hi...
Multiple storage types AB01, AB02, AB03, AB04 (high rack storage types) are there in EWM warehouse.
Putaway completed,
for article A in AB03 storage type having GR date 09.01.2013
for article A in AB04 storage type having GR date 12.02.2013
for article A in AB02 storage type having GR date 20.03.2013
for article A in AB01 storage type having GR date 12.04.2013
As per FIFO stock removal strategy sequence must be as follows
1. AB03
2. AB04
3. AB02
4. AB01
Currently its going in the sequence AB01, AB02, AB03, AB04.
Can anyone share the FIFO stock removal strategy config
Please suggest how this can be corrected.
SAM
Hello,
I suggest you to Define Storage Type Group and assign your storage types to Storage Type Group. Then, in your search sequence, you assign Storage Type Group instead of Storage Types.
System will follow the search sequence as you mentioned.
Regards,
Sathish
Similar Messages
-
Block upon stock removal indicator in Storage type master data
What is the significance of "Block upon stock removal" in storage type master data. Would it work if the storage type is bulk storage and SUT active?
The config setting with indicator 1 will stop you from creating more TOs for a bin in st type 425 if there are already open picking TO for that bin. In other words lets say you have a stock of material u201C79010460u201D in st type 425 u2013 B20B bin and you have created a picking TO from this bin unless you confirm this TO no more picking/stock removal TOs will be allowed and the bin will be blocked. You can see that block on bin in LS06 transaction. Once the TO is confirmed the block will be lifted automatically from the bin to create new Picking TOs.
-
Block manual stock removal for a storage type
Hi,
Is there any configurational setting where in we can block manual stock removal (i.e creation of TO with mvt type 999) for a particular storage type.
Thanks
PrakashHi,
Try using the transaction LS05, give the storage type and the bin range to block all the existing bins.
But i am not sure if there is any setting at the movement type level.
Aktar -
How to exclude stock of a particular storage type from collective availabil
How to exclude stock of a particular storage type from collective availability check in MDVP.
you can set the storage location as 'Storage location stock excluded from MRP' value '1' in the field
Sloc MRP indicator , in MRP view $ when you enter a storage location accessing the material master.
Thsi is the only way to exclude the storage location, you have to do it per each material and also it is excluded from the MRP.
With this option the stock is not considered in ATP.
IF you need the storage location in the MRP, then you should consider the use of MRP Areas.
With the MRP Areas you define which plants/storage locations belong to each MRP area and the ATP is performed for eah area with the stocks that exist in each of them.
Please if the issue is solved set the thread as answered and provide the points to the useful replies.
thanks for your cooperation -
Error during Stock movement between two storage type
Dear Friends
How do i move the stock from one storage type to other storage type within a warehouse?
In the material master i have maintained a storage type indicator for automatic storage type determination.
now when i create a TO for moving the stock from the orginal loaction to other location (NOT INTERIM) i am getting an error
Error occurred during storage section search (1740 003)
Message no. L3041
Diagnosis
No storage area search has been defined for this material and this storage type.
Please assist
ThanksDear,
Kindly specify the storage section indicator in Material Master - WM view.
Regards,
Sandip -
Stock transfer from 998 storage type to Physical bins
Dear Experts,
As part of data conversion,After loading huge stock into SAP 998 st type into INITIAL bin,I want to move the stock into physical bins.I have SU management activated.
1)During the initial upload to 998 , I have taken Material slip field as storage bin coordinate in the external system, How would I move the stock into respective bins in SAP?
2) How would I map SAP bins with stock locations (counter part for storage bins in external system) ? So that I want to make sure , stock will be placed into the right bins.
3)What will be my approach for moving the stock into physical bins? Can it be through LSMW - LT01 with 999 movement type? Or is there any other method i can use?
4)Is there any tamplete to use for the above process? Do I need to develop any conversion program?
4) I want to print the storage units simultaneously during this process. How can I do this?
I really appreciate your help.
ThanksAnswering your questions:
1)During the initial upload to 998 , I have taken Material slip field as storage bin coordinate in the external system, How would I move the stock into respective bins in SAP?
Use this info to load the stock into the correct storage bin
2) How would I map SAP bins with stock locations (counter part for storage bins in external system) ? So that I want to make sure , stock will be placed into the right bins.
Don't really understand what your doubt is, but if your MM/WM setup is correct, this should go OK
3)What will be my approach for moving the stock into physical bins? Can it be through LSMW - LT01 with 999 movement type? Or is there any other method i can use?
LSMW, with 'Standard batch/Direct Input' Object 0220 and Method 0000 (should be assigned to program RLBEST00).
4)Is there any tamplete to use for the above process? Do I need to develop any conversion program?
Based on previous answer, no!
4) I want to print the storage units simultaneously during this process. How can I do this?
Just assign the correct print code to the 561 movement type...but beware for the fact that a lot of labels will be generated at the same time and you can stuck your printer :s -
Upload stock for material in storage type ??
hii
How to increase stock for particular material in LS26??
Stock for ware house and storage type ??
ThanksHi,
you need to create some stock in the bin for whatever the operation you are doing. Here are the steps.
first check if you have stock of same material in any of the other bins using LS24. If so, create TO using LT01 (mov type 999) for source and destination bin (bin of your interest) and confirm the TO. Do your operation, it should work.
If its a test system, you can try upload stock in IM using MIGO-501 mov type or MB1B-561 mov type. Crate TO for material document using LT06 (TO may get automatically generated based on your system settings). Confirm the TO (note the destination bin). If the destination bin is not same as the bin of your interest, use first option to transfer stock to bin of your interest.
Thanks,
Ram -
FIFO STRATEGY FOR STOCK REMOVAL
Dear Experts,
I have problem, I have assigned FIFO Stock Strategy for Stock Removal in all storage types, but I am facing problem when we recieve sales return (with reference to old sales order), our company wants that the removal of old sales return to be done first by system automatically, please confirm, how to achieve this.
Please help urgently.
Regards
IshuHi
FIFO works on the GR date against the quant
You can use LS22 to 'change' the quant and in there you can change the GR date
The issue is that because you receive the stock in on say 01.03.2011 that becomes the GR date even if the stock is 6 months old
Therefore changing the GR date to say 01.06.2010 (or earlier than your existing stock) itmeans that it will get picked earlier
I hope that this helps
Frenchy -
Issue on complete stock removal
Dear All,
I am configuring WM in my test system.
Can anyone tell me what are the settings reqd for complete stock removal from a storage type so that the extra qty is returned to the source/destination storage bins when I create a TO against a delivery.
I tried the following assignments but its not working.
1. Shelf Storage type (which is my source storage type) I have ticked the Full stock removal as well as return to same bin indicator. (Since SU Mgmt is active for the storage type).
2. Assigned a Return Storage type & bin in 601 mov.type.
Note:
System is picking the full Qty in TO only if I tick the overdeliveries indicator in 601 mov.type. Why ??
With the above assignements system is neither displaying the Return storage type & bin which I mentioned above nor my source storage type (shelf Storage) when I create a TO against a delivery.
Please advice how to solve it.
Hope its clear.
Regards,See as I mentioned above if I tick the return to the same storage bin in my source storage then system will remove the complete quantity from the storage bin irrespective of delivery qty when I create a TO using LT03. But the quantity which will be displayed at the time of TO creation will be the delivery qty & the remaining qty will be blocked for removal till I confirm this TO using LT12. Right ??
As I mentioned before:
A) "Return stock to same bin" > Yes, the SU will be blocked for stock removal and the TO quantity is the delivery qty (not the qty of the whole SU)
B) The difference of whole SU qty and delivery qty will get to the pick point
. When will we put the tick in the Retain overdelivery field in the interim storage type (916). & whats its effect ?
because return to same bin option is mandatory if we put the full stock removal for SU managed storage types.
In case of SUM is active, the "Retain..." indicator has no meaning, because whether you use "Return stock to same bin" indicator or pick point.
("Return stock to same bin" is not mandatory in case of SUM is active, other option is pick point.)
2. Do we use the return storage type & return bin in the mov.type - 601 & also the return Storage type in the storage type master only incase of Non-SU Managed Storage types, If not, when will these fields come into picture incase of SU Managed Storage types.
To be more specific, Suppose If I assign a Return Storage type & bin in the mov.type settings or if I assign a return storage type in the Source storage type when will this be determined in LT03 ?
1. I wanted to assign "Return storage type" in case of SUM is active > I got error mesage LT088.
2. Even if return storage type was defined for the WM-mvt, it didn't have any effect in case of pick point (and it has no meaning in case of "Return stock to same bin").
Based on point 1&2 I think these settings are not applicable for SUM.
Regards,
Csaba
Edited by: Csaba Szommer on Mar 22, 2009 9:02 PM -
Reservation of stock at Storage Type level in Warehouse
Hi Gurus,
My client is currently using ORACLE ERP system and they are migrating to SAP.
In ORACLE there is a flexibility wherein reservation can be activated for warehouse stock.
However, in SAP we are mapping the multiple warehouses present in ORACLE as Storage types.
So, I would like to know whether there is a way to reserve the stocks at storage type level.
According to my analysis direct reservation is possible at plant and storage location level.
However I would like to know from you whether there is a direct way to reserve the stocks in storage type in warehouse or any in-direct way possible to reserve the storage type stock?
Thanks & Regards
SubhasisHowever, in SAP we are mapping the multiple warehouses present in ORACLE as Storage types.
That's probably a bad move. A physical warehouse should be at least one storage location, and storage types should only be used for sub organization inside a warehouse.
For example if Storage types are used for High Rack, Bulk, etc (what they are supposed to be used for) there is no reason to reserve stock in a specfic storage type.
Storage type vs Storage location. A "type" shouldn't be used to separate different warehouses. -
WM - Stock removal strategy: small/large quantities
I have two different storage types: one to remove small quantities of a
product (with negative stocks available) and one for the large ones. In
the material master record I have established for a product that
quantities lower than 50 units are removed from the first storage type.
I also have defined for the product one stock removal rule (to search
for material in the two storage types)
When I don't have enough available stock in my small quantities storage
type, the system always search for stock in the other storage type
(although I asked for 10 units), but what I need really is to have a
negative available stock in this storage, and I will do a reposition.
It's not correct that for small quantities it searchs in the large
quantities storage type.
If in the stock removal rule I'd only put the small quantities storage
type, then I get negative available stock in the storage type, but,
logically, the system then doesn't find from where to remove large
quantities.
Thank youHi Paloma,
I hope defined the strategies for both the storage types (for large and small qty.) what about the the negative stocks, how are you going to do the configuration. Mostly what you can do is, you can allow the negative stocks for that particular storage type, but you can't guide the system to create negative quants if the quantity is small.
Hope it is helpful
Aktar -
MRP check on storage type (WM)?
Experts,
Is it possible to configure MRP in a way so that stock in a certain storage type (WM) is excluded?
Thanks,
JanHi,
You can exclude str location from MRP.
Open the material master in change mode by giving input of plant & str location( which one to be exclude).
In MRP4 view, select - Exclude str location from MRP run.
When MRp run, system will not consider this str location.
Regards,
Dharma -
Create multiple TO's from IM storage type
Bit rusty on SAP transactions.
If I have stock in a 'Differences' Storage Type (non-SU) that I want to bring back into storage on 30 different SU's is this possible?
Other than one by one using LT01. Can I use LT04 in some way?Pete,
You can also mention a specific qunatity in Material Master WM2 as LE quantity.
Once done you can go ahead with LT01 with Full quantity & that will split in multiple line Items.
Please use TO creation screen control as 1 i.e. Putaway prep that will help you to entre multiple destination Bins (if differs)
Thanks,
mahesh -
-ve stock in the pick storage bin
Hi All,
Here is the example that explains the problem we are having: If the outbound delivery has a quantity of 300, when processed using VL06P the TO is being created for 300 where as the actual available quantity in the pick bin is only 200. This is resulting in -ve availability stock at the pick storage type when we are checking in transaction LS26
What is required is create the TO for only the quantity that is available at the pick bin and avoid u2013ve stock at the pick storage type level
Can someone suggest what config is missing?
Thank youUncheck negative stock for the storage type you are picking from. IMG - LE- WM-Master Data-Define Stg Type uncheck 'Allow Negative Stock'.
-
I thought this would be easily solved with a few searches.. but no...
I'm trying to do some testing in a development box but i needed inventory to consume. So I did a 561 for god-awlful amount of stock so I don't have to do this again.
My problem is that the plant is WM managed. After the posting in IM I checked in LS26 and my stock is showing in storage type 998. I need it to be in storage type 108. I was able to get to a TO number in LS26. It has been confirmed.
What transaction can I use to change the storage type and what transactional data would I need.
I've searched using the following parameters
- SAP WM "How to" change storage type
- SAP WM 561
And several variations of the above.
Thanks!!
CraigOk.. I was in that screen earlier but had trouble with it. Went back to it again and finally got it! The key was to use 999 movement. I wasn't sure what to use there.
Thank!
Craig
Maybe you are looking for
-
Transfer voice memos from iPhone 5 to mac iTunes without replacing all music on iPhone
I have some new voice memos on my iPhone 5 as well as selected music from my iTunes. I want to transfer the new voice memos to iTunes on my mac but it appears that it will since my itunes library to my phone. The iPhone is connected to the mac. i am
-
Is there a way to restore your computer to the way it was when it was bought? I bought it in April of this year. Im having blue screens and I don't no how to fix it!
-
How to set a Student Profile Picture in Student File (PIQST10)
Hi Experts, I want to ask your help to know if there's a standard functionality for showing a student profile picture in the main screen of the student file (piqst10). Thanks so much for your suggestions in advance. Best regards, Johann Daniels
-
Can't edit outlook email in HTML- whole message replaced with "undefined".
In editing the html of messages in Outlook using Firefox browser, I click on options -> edit in HTML and whether or not I do anything to change the email whilst in the HTML editing option, as soon as I click on Rich Text to check the formatting etc t
-
Photos in events have disappeared - the folder just shows a palm tree
In my events page, some of the events now just show a palm tree with nothing in it, my photos have diasappeared, any ideas