Stock removal from storage location

Dear All,
System showing some stock at various storage location, but whic is physically not in location. Every month balance sheet this stock is shwoing.
Please explain me any how to delete this stock from those storage locations.
Thanks in advance.
Thanks & Regards,
Krish

Hi sap gurus,
there was an production order xxxxx for a machine. so all the materials was booked for that order. then , suddenly the requirements changed. so, they stopped the order n used the whole material for another similar order. any extra material needed 4 the new production order was added to the new one and closed the new order. But, they hav not sent back the materials for the old production order. It has resulted in over valuation of the stock-WIP. i/e., there is a machine worth 15 lakhs on the system virtually. wheras in reality, physically, the machine doen't exist.
Now, the issue is if u want to reverse the work in progress on 31.03.08, will the system let us do (i.e. can we reverse a WIP on a previous date??). if so, pls suggest the complete procedure including Tcode's to use.
Thanks
Pavan

Similar Messages

Error stock transfer from storage location to storage location.

i used transaction code mb1b i got error NUMBER RANGE OF TRANS/EVENT TYPE WA IN YEAR 2011 DOES NOT EXIST can anyone answer how to solve this error?

Hi,
I think this is a configuration issue.Please check below thread your issue will get resolved,
Number range for trans./event type WE in year 2011 does not exist
AMIT

Exclude stock at a storage location from the Productionn Planning run

Hi,
We have to exclude a storage location from the Production Planning run. We already implemented a user exit in CIF and changed the stock at the storage location to a category Z1 that is not relavant to SAP, but the stock at the location is still being consitered for production planning.
Please suggest a way so that it is excluded from the Production planning
Regards,
Sireesh

Hi Sireesh,
Please try these following options.
1) Filter this storage location in the programme /SAPAPO/RMSDPDEP by writing customised code with an abapper, so that it will drops the storage location stocks not getting planned during deployment
2) Try anyof these user exists
APOBP011 Enhancement for Stock BAPIs (BUS10504)
APOCF011 Inbound Processing: Stock
APOCF027 Customer-Specific Enhancements: Stock
3) Exclude the category from the ATD receipts category group maintained in the master data
Regards
R. Senthil Mareeswaran.

Transfer stock from Storage Location to Bin

Dear All,
what is the procedure to transfer stock from Storage Location to Bin ( T.Code and Mov.Type)
waiting for your Reply
with best regards
Suman

Dear Kiran
Thnaks for your reply
Im doing Process as below...
T.Code:LT01
click on Transfer Order ( Header) select WITHOUT REFERENCE
WHNO: CWH
MOV.TYPE:999
MATL:
QTY:PLANT:
S/L
NEXT SCREEN
DESTINATION
ST.TYPE:
STORAGE SEC:
BIN NO:
AFTER PRESS ENTER SYSTEM GIVE BELOW ERROR MESSAGE
"CANNOT FIND SOURCE STORAGE BIN"
AFTER THAT IF I ENTERED
FROM
ST.TYPE:
STORAGE SEC:
BIN NO:
THEN SYSTEM GIVES ERROR MESSAGE
STORAGE TYPE XXX DOESNOT ALLOW NAGATIVE STOCK FIGURES
EVEN IN STOCK OVER VIEW MATL. IS AVAILABLE
PL. CORRECT IF IM WRONG
with best regards
Suman

MD04 - Display the stock on one storage location particulary.

The transaction MD04 allows seeing the stock of the plant in the first line of the Stock/requirement list.(MD04)
When the plant includes several storage location (e.g MAG1, MAG2, MAG3), we don't have the detail of the quantity one each storage location.
We can use the filter (by using SETTINGS and FILTER ON) that controls the display of the MRP list and the stock/requirements list but this function don't allows seeing only the stock on one storage location particulary. We have to go the tcode MMBE in order to know the stock on each storage location.
Thanks in advance for yours reply.

What is your real problem?
Display the stock storage location-wise is one thing and do MRP without certain storage location(s) (=exclude storage locations from MRP) might be another.
If you only want to display stock of certain storage locations in MD04 but use all you stock for planning, I think there's no reason for it.
If you really want to exclude certain storage locations, then you have to be aware that MRP won't consider that stock (for the plant segment). It will also have impact on ATP (atp won't use that stock too).
So, there's a big difference between exclude a storage location from MRP and to exclude its stock from display.
(You can exclude storage locations from MRP via material master --> MRP4 view --> you have to enter both plant/sloc as organisational level and you will see the suitable tab. It is also possible to control this indicator via config for to be created material masters - you can search and find threads)
You should describe your exact requirement and maybe forum mebers can give you advice.

Define Shipping Data for Stock Transfers Between Storage Locations

Hi Guru,
Can i know what is the purpose to maintain Customer, SHipping data for each storage location for the STO between storage location?
Purchasing --> Purchase Order -->
Set up Stock Transport Order-->
Set Up Stock Transfer Between Storage Locations-->
Define Shipping Data for Stock Transfers Between Storage Locations

The Sales org, Distribution channel, Shipping point, Vendor and Customer are maintained to created the delivery.
It is for the transfer of stock between storage locations with any movement type.
Eg: When you do a 311 movement type from Sloc A to Sloc B, then it will create a inbound delivery with the Vendor specified for Sloc A and an outbound delivery from Sloc B with the Customer specified assuming the customer and the vendor as the Plant.
You have to create a internal Vendor and Customer.
Hope it helps.

Transfer material from Storage location to Storage type.

Hello,
At the time of usage decision we are posting the stock in "To Reserve stock" for that we have created seperate storage location ie for Sample material.
we having two samples one is customer sample and other is in house sample both the samples we are posting in same storage location.
Client want to differentiate these two samples, so we have created two storage types.
Now My question is " can we transfer the samples in different storage types from Storage location.
This is the QM and WM integration.
Please advice
Thanks in advance.
Regards
Anil

Hello Anil
I don't think you can transfer from storage location to storage type.
If your purpose is to differentiate these two samples, then why not use different Sample types with different number ranges and thus identify them. You don't have to get into QM-WM integration just for that.
If you want you may also set up 2 different physical sample locations: That would be ideal.
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Types
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Number Range
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Locations
On the application side you may use the sample management procedures to deal with samples. See the following link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/b8/b9b3341a933f50e10000009b38f83b/frameset.htm
Does that work? Let me know.

Unrestricted Stock of issuing Storage Location in reservation

Hi Experts,
We have a requirement, we want that unresticted stock of issuing storage location is printed on reservation (MB23) Thru MB25.
How it is possible.
Kindly help me out, can we use sqvi or something else.
Regards
GR

HI ,
Just Modify this Report with the help of a Abaper and ask him to add an additional column in the report that is the Stock in the unrestricted use for this Material and Plant
combination.
TO achieve the Since we know the Material ,plant and storage location
PIck up the Material Number --RESB-MATNR
the Plant code --RESB-WERKS
the storage LOcation--RESB-LGORT
Go to Table RESB table in this table against the Feilds RSNUM -Reservation NUmber and RSPOS( Reservation item number)
IN some cases the storage location would not be entered by the user ,take care ,he enters the storage location by every user ,so make it mandatory in the screen layout.
After Picking up all the three values ,pass those values in the Table.
MARD line item vise present in the reservation (maintain a loop for the same)
in this table pick up value in the Feild MARD-LABST which is the stock in the unrestricted use.
one thing ,i dont know the exact requiremnet ,but it is to resrict the user from creation of reservation more than the stock ,it can be done by avaliability check.
hope so it helps
Regards
Anjanna.

Stock Transfer between Storage Location with Order

Dear MM experts,
I am into SAP SD.
Our client wants to Transfer Stock from one Storage Location to another Storage Location of the same Plant. (This can be easily done thru MB1B via Transfer Posting)
But the unique requirement here is they require some kind of Delivery Order or Tansfer Order to be created first & only based on that document user can transfer Stock between Storage Locations of a same Plant. (Similar to Inter-Plant Stock Transfer where we create Stock Transfer PO & then move goods between plants).
Can you please suggest on how to achieve the above scenario.
Thanks,
Jignesh Mehta
Mumbai

hi
Stock Transfer between Storage Locations
u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
u2022 As a result of which user can input issuing storage location with supplying plant.
u2022 Facility of using different delivery types for different issuing storage locations is available.
u2022 Shipping Point data can also be determined based on the issuing storage location.
refer following
http://sapfunctional.com/MM/StockTransfer/Configure.htm
http://help.sap.com/saphelp_scm41/helpdata/EN/23/29cf20eabe094e957763a46aa5be9d/content.htm
regards
kunal

Stock in 3 storage location..

Hi Friends,
I have 3 storage location where I place stock. As you know that we have only one defualt storage location in Production Order. When system not able to find a stock at that storage location then it will create missing part list msg.
I would like system should pick the stock up automaticaly from another storage location, if stock in not available in default storage location.
I would appriciate, if you could write in steps to do config.
Thnks

Hi,
There may be requirement to withdraw the material from different stocks for goods issues and stock transfers based on some criteria or strategies. To meet this requirement in SAP we have stock determination strategies which determine how and when the material should be withdrawn, and from which storage locations and stocks. We can include the following stocks for the purpose of stock determination: unrestricted-use stock u2022 vendor consignment stock u2022 pipeline material u2022 sales order stock u2022 project stock.
Based on the stock determination strategy you define in configuration, the system makes decisions on material withdrawal depending on the material, plant.
Configuration
SPRO > Materials Management > Inventory management and Physical inventory > Stock determination
Define a stock determination strategy, according to which stocks should be reduced. Each strategy is determined at plant level based on a stock determination group and stock determination rule.
Assign a stock determination group to the material in the material master record.
Regards.

How to realize summarized display of stock values on storage location level

Hi all,
we have implemented in Release 3.5 a report to analyze Stock values on storage location level according to the "How to...realize summarized display of stock values on storage location level"- paper. The report is running witout problems.
Now we are going to upgrade our BW-system to release 7.01 in technical environment, we have not upgraded our reports.
Executing the report in release 7.01 we get an error message "Object field I_S_DATA-0TOTALSTCK not found"
The error is coming from line 14 Inc GET_FIELD_POSITION_D in Prog CL_EXM_IM_RSR_OLAP_BADI.
Unfortunately the document "How to... realize summarized display of stock values on storage location level" can no longer be found in SDN.
Is there any new How to - document for this kind of reporting?
Does anybody can give me advice for chances in coding?
Thank you for answers.
Best regards,
Andreas
Edited by: Andreas Förner on Dec 9, 2009 1:52 PM
I have got a solution from support.
The solution is described in note 924320.
Andreas

Hi,
I assume you have also created class "ZCL_IM_Z_MATERIAL_PRICE".
In the implementation of virtual InfoObjects
ZCL_IM_Z_MATERIAL_PRICE we have changed the method INITIALIZE:
OLD:
* fill the global variable
     UNASSIGN <l_global>.
     ASSIGN (l_global_name) TO <l_global>.
     CHECK <l_global> IS ASSIGNED.
     <l_global> = cl_exm_im_rsr_olap_badi=>get_field_position_d(
                                        i_fieldnm = <l_s_sfk>-kyfnm <--
                                        i_s_data = i_s_data ).
   ENDLOOP.
NEW:
* fill the global variable
     UNASSIGN <l_global>.
     ASSIGN (l_global_name) TO <l_global>.
     CHECK <l_global> IS ASSIGNED.
     <l_global> = cl_exm_im_rsr_olap_badi=>get_field_position_d(
                                    i_fieldnm =
<l_s_sfk>-VALUE_RETURNNM
i_s_data = i_s_data ).
   ENDLOOP.
This solved our issue. Please regenerate the query after
implementing the correction.
Hope it solves you issue too.
Best regards,

Transfer posting value limit from storage location to location

Dear Experts,
1. Is there any option to restrict the stock value that can be transfer-posted between storage locations ?
2. Any option to limit the maximum stock value a storage location can hold ?
Thanks

Dear All,
Thank you for valued feedback.
1. I was aware of the fact that stock is valued at plant level and it was not possible in standard. I was looking if anyone has done any innovative solution for this requirement.
2. Jürgen L - Thanks for the user exit, I was checking this yesterday and thought of check the Quantity in SLoc * Material Price to check the value before posting.
3.Joshua Albert - I had already configured EWS but business is not happy as there is no restriction only an exception email.
The issue is we are have a sales channel, where we created each Saleman as Storage Location and Transfer the stock to Salesman Storage Location and they do door to door selling to retail outlets and then after 2 days they come back with actual sales invoices which are recognized as sales which is consumed from their Sloc and again stock in transferred to their location, but there is no control on this.
I looked at changing the solution to customer consignment with credit management but credit management doesn't work for consignment fill up.
4. Sangeeta Khurana - Could you please give me more info on wht you hve suggested, was not very clear.
Thanks!

Need to display the Stock Values at storage location level - 0IC_C03

Hi All,
I am developing Stock Movent Report on 0IC_C03 - Material Stocks/Movements.
I have more than one storage location for plant. Stock quantities are calculating at storage location level and Stock Values are calculating at plant level.
I have no issues with quantities. Only problem with Values.
2LIS_03_UM is not picking the starage location, so that the revaualtion values are falling under unassigned nodes. When i set filter on storage location these values were not showing as they are under un assigned nodes (#).
I want to get the Stock Quantity and Stock Values at Storage location level in my report.
I found that soulution for that is Applying SAP Note : How to Realize summarized display of stock values on storage
I have done development as per the document. But when i run the Query it is going to debug mode first and then it saying This program cannot display the webpage
Can any one faced the same situation, Please help me if so.
Thanks in Advance.
Gopal N

Hi Sachein,
I am getting this An exception(CX_RSR_PROPAGATE_X) occured when debugging, and then it leads to next screen saying that:
This program cannot display the webpage
   Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
   What you can try:
     Check your Internet connection. Try visiting another website to make sure you are connected.
     Retype the address.
     Go back to the previous page.
     More information
Please let me know you need any more information.
Thanks in Advance
Gopal N

No Stock value at Storage location level in BW report

I am facing problem in getting stock valuation at storage location level.
The problem is that, in R/3 Stock valuation is done at plant level, when we do storage location to storage location movement , only stock quantity gets changed and no FI entry is getting generated . So there is no movement of stock values at all. when we load this transaction data into BW , obviously i will arrive with wroung value . so what to do in this case ?
Thanks & Regds,
Kavan

Hi Kavan,
Could you please explain the scenario & provide the Ds you are using.
Thanks & Regards,
Suneel

Report on QI, Blocked, Returned Stocks at Plant & Storage location level

Hi,
Would like to know any reports which gives QI, Blocked, Returned stocks at Plant & Storage location level.
Regards,
Vengat

hi,
What do you exactly mean say by "Returned stock"..
Also go through by MMBE tcode ...
Regards
Priyanka.P

Stock removal from storage location

Similar Messages

Maybe you are looking for