Stock removal issue

Hi Experts,
To make a finish product of hose i need to pick different components as per order. In that I need to pick a hose for example : 50 EA. If I see physically in storage type I can get 50 EA, greater than 50 EA and less than 50 EA but for example if 100 EA placed in bin earlier than other pieces.
When the user looks for picking 50EA of hose it is giving him 100 EA hose because of FIFO rule , then user to cut the hose and use only for 50 EA. But, we need to make efficient pick I mean system should have picked 50EA because it is available in bin.
Can you please suggest what is the best pick rule to make the efficient pick ? Using EWM 7.0 version.
Thank you in advance.

Hi Juergen,
Thank you for your reply. Already defined unit for HOSE product is only EA in system, i don't see any
unit with meter or inches in stock removal table sort fields. Can you please suggest me what should i
do for this case now? I dont have idea on this to define new rule.
Thank you in advance.
Thank you...
Sridhar

Similar Messages

Issue on complete stock removal

Dear All,
I am configuring WM in my test system.
Can anyone tell me what are the settings reqd for complete stock removal from a storage type so that the extra qty is returned to the source/destination storage bins when I create a TO against a delivery.
I tried the following assignments but its not working.
1. Shelf Storage type (which is my source storage type) I have ticked the Full stock removal as well as return to same bin indicator. (Since SU Mgmt is active for the storage type).
2. Assigned a Return Storage type & bin in 601 mov.type.
Note:
System is picking the full Qty in TO only if I tick the overdeliveries indicator in 601 mov.type. Why ??
With the above assignements system is neither displaying the Return storage type & bin which I mentioned above nor my source storage type (shelf Storage) when I create a TO against a delivery.
Please advice how to solve it.
Hope its clear.
Regards,

See as I mentioned above if I tick the return to the same storage bin in my source storage then system will remove the complete quantity from the storage bin irrespective of delivery qty when I create a TO using LT03. But the quantity which will be displayed at the time of TO creation will be the delivery qty & the remaining qty will be blocked for removal till I confirm this TO using LT12. Right ??
As I mentioned before:
A) "Return stock to same bin" > Yes, the SU will be blocked for stock removal and the TO quantity is the delivery qty (not the qty of the whole SU)
B) The difference of whole SU qty and delivery qty will get to the pick point
. When will we put the tick in the Retain overdelivery field in the interim storage type (916). & whats its effect ?
because return to same bin option is mandatory if we put the full stock removal for SU managed storage types.
In case of SUM is active, the "Retain..." indicator has no meaning, because whether you use "Return stock to same bin" indicator or pick point.
("Return stock to same bin" is not mandatory in case of SUM is active, other option is pick point.)
2. Do we use the return storage type & return bin in the mov.type - 601 & also the return Storage type in the storage type master only incase of Non-SU Managed Storage types, If not, when will these fields come into picture incase of SU Managed Storage types.
To be more specific, Suppose If I assign a Return Storage type & bin in the mov.type settings or if I assign a return storage type in the Source storage type when will this be determined in LT03 ?
1. I wanted to assign "Return storage type" in case of SUM is active > I got error mesage LT088.
2. Even if return storage type was defined for the WM-mvt, it didn't have any effect in case of pick point (and it has no meaning in case of "Return stock to same bin").
Based on point 1&2 I think these settings are not applicable for SUM.
Regards,
Csaba
Edited by: Csaba Szommer on Mar 22, 2009 9:02 PM

Full stock removal functionality for 201 movement type

Dear Friends
I am facing one problem with full stock removal. As per my requirement, system should remove full container to staging area there
the requried qtty will remove and the remainging qtty goes to another storage type. When I post 201 movement type, system is not picking the full container.
When I observe movement type it is using dynamic bin and I changed it to static bin and I created a bin in 911 and I did the positng it picking the full container.
My question is, I chaanged in movement type and is there any impact for the same.
Regards
Raghu

Hi
The only impact I can think of is with the 'dynamic bin'setting the bin is the cost centre and with your change ALL of your Goods issues to cost centre will be in the same bin and so clearing these quantities out will not be so easy as when you create the TO to 'pick' the stock to clear it out it will not be able to pick the specific bin for the cost centre, However as all of tyhe stock is in the same 'bin' it should not be too much of an issue as it will jsut reduce the bin by the qty on the TO.
It just means that if you want to report on the stock in 911 then it will all be inthe same bin and you cannot differentiate as to which material was put there by which cost centre
Frenchy

FIFO STRATEGY FOR STOCK REMOVAL

Dear Experts,
I have problem, I have assigned FIFO Stock Strategy for Stock Removal in all storage types, but I am facing problem when we recieve sales return (with reference to old sales order), our company wants that the removal of old sales return to be done first by system automatically, please confirm, how to achieve this.
Please help urgently.
Regards
Ishu

Hi
FIFO works on the GR date against the quant
You can use LS22 to 'change' the quant and in there you can change the GR date
The issue is that because you receive the stock in on say 01.03.2011 that becomes the GR date even if the stock is 6 months old
Therefore changing the GR date to say 01.06.2010 (or earlier than your existing stock) itmeans that it will get picked earlier
I hope that this helps
Frenchy

New stock removal strategy

Folks,
This is the scenario, We have 2-3 pallets in a single storage bin.The bin is like a deep rack in the warehouse.
So the logic would be to use the Last in first out strategy to pull out the pallet which is outside/first one reachable to the user.
So LIFO basically works on the actual TO creation time so in case a TO for P1 is created on 01/01/01 at 12:00 PM and another TO for P2 on 01/01/01 at 12:01.The proposes the pallet created at 12:01 to be picked when there is stock removal.
But the scenario is like though the TO for P2 is created first at 12:01 and it is confirmed at 12:15 and the next one P1 at 12:16 so the pallet P2 will be placed inside the bin and P1 will be placed outside/reachable to the user.
But when LIFO kicks in for automatic TO creation it will propose p2 as the To was created at a later time but the user will pick P1 as it is the nearest reachable to him so when he tries to confirm the pallet at production the system says that the wrong pallet from what was proposed was picked.
Is there any enhancement we can use to build this custom stock removal strategy.

Hi,
Just querious on TO confirmation time...why it is confirmed differently? Will immediate TO confirmation (after TO creation) creates any issue to putaway process into Rack?
If don't want immediate TO confirmation...you can manipulate the picking of pallet through user exit MWMTO004 Own stock removal strategy (EXIT_SAPLL03A_005) to change the sorting of records on TO confirmation date and time instead of TO creation date and time.
Hope this will help.
Reg,
Sudhir

Large/Small quantity stock removal vs partial stock removal.

Hi All,
I am trying to get following configuration in place: Stock removal A (partial pallet) with Full stock removal "Checked" and return the unused stock to storage type mentioned under "return storage type". But I am getting following error "For Compl. Stock removal or SU managed, either pick point or return to same bin). But if you see the SAP documentation it allows this configuration. My 2 storage types which I am using have SU & non-SU managed with putaway strategy as "next empty bin" as we don't know what are the weight or quantity restriction on each rack location for now.
My second config issue is related to usage of stock removal strategy M (large/small qty). Like mentioned above I have to area; SU & non-SU managed. And I would like to use F (FIFO) strategy for non-SU managed inventory and use M for SU managed inventory with an option of checking if the quantity is higher than SU, pick the remaining small quantity from non-SU managed place. Can I acheive with different stock removal at storage type level; one with M and another with F or do I need to have M.
Let me know if more clarity is required to provide responses.
Thanks.

Hello,
For 1:
Partial picking can be done on a SU with the usage of a pick point . The pick point is a place where materials are brought and moved for a partial pick up from an SU. In the std system storage types 010 & 011 have been defined for the same.
you may refer to the following link: Partial pick using a pick point and how you carry out with SU's invloved.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
For 2:
When you want to use M as the stock removal strategy, the following needs to be done:
1) You define a "small" storage type where only a limited quantity can be removed. ( the control qty in the WM2 view of MM)
2) You define a "large" storage type and this will be removing quantities above the control quantity limit
3) Define the control quantity of all those materials that you want to be picked from the small storage type. (This could probably correspond to your SU qty, )
you need to have the smaller storage type set as "M " and when you are customizing search strategy for the storage types ( SPRO> LE>WM--> Strategies >stock removal strategies> Define strategy for large/ small qty, you can then define the first storage type for E as smaller storage type and then the larger storage type i.e. the second one should be higher than the preceding one.
Please see if this helps.
Thanks,
Edited by: Abhijit Sadhu on Jun 24, 2009 4:58 PM

Full Stock Removal & Full Stock Placement

Assume, in the source storage bin "B1" we have stock of 100 qtys. (Storage type "S1") and the destination storage bin is "B2" (Storage type "S2").
Suppose, a process order has been created for 75 qtys. and corresponding to that a TR generated for 75 qtys..
So, material has to be transfered from source bin BIN "B1" (Storage type "S1") to destination bin "B2" (Storage type "S2").
So, when we create a TO for this TR & confirm the TO, system picks only 75 qtys. from the source bin "B1" (storage type "S1") & transfers 75 qtys. to the destination storage bin "B2" as per the TR qtys.. (instead full 100 qtys. is to be transfered)
Now, the clients requirement is that, complete 100 qtys. is to be transfered from the source bin "B1" (Storage type "S1") to destination bin "B2" (Storage bin "S2").
In the configuarion settings for Storage type 'S1', "Full stock removal is activated" and "Retun stock to same bin is active" (SU Mngt. is active. ). As the SU Mngt. is active, we are not able to un-check the indicator "RETURN STOCK TO SAME BIN".
But even though the above setting is active, while stock removal & placement, the system is considering only 75 qtys.and transering the 75 qtys. from "B1" to "B2", instead at the time of stock removal system should consider the full 100 qtys. & full stock 100 qtys. is to be transfered to the destination bin "B2".
Also, if i check the indicator "OVERDELIVERIES" for movement type 319, we are able to transfer the full 100 qtys. to destination bin "B2", but we have a situattion not to check this indicator for movement type as this will effect for all the warehouse numbers as well as all the storage types.
So, Please help me, how can we achieve the "FULL STOCK REMOVAL & FULL STOCK PLACEMENT" .....
What STATERGIES to be selected & any other configuration is invovled in this....please let me know.
Thanks & Regards,
Pavan CN
Edited by: cn_pavan on Jul 25, 2009 7:19 PM

Hi,
Please check this thread:
Re: Issue on complete stock removal
remark:
we have a situattion not to check this indicator for movement type as this will effect for all the warehouse numbers as well as all the storage types.
As I remember (I'm not before SAP, so maybe I'm mistaken) you can define movement type WH-specific.
Regards,
Csaba
Edited by: Csaba Szommer on Jul 26, 2009 7:59 AM

Unit of measure for stock , Goods issue , Purchase.

Dear All Experts,
How we can maintain different unit of measure for Stock, Goods Issue, Purchase?
Regards,
Sandeep.

Hi,
The UOM qualifies the quantity you enter on the
purchase order line. This will default in if you entered an item number, if not enter
a UOM of your choice using the List of Values.
Please Refer the following links...hope it helps you....
http://help.sap.com/saphelp_45b/helpdata/en/c6/f83bb94afa11d182b90000e829fbfe/content.htm
http://www.admin.cam.ac.uk/offices/finance/training/manuals/inv_training_stores_user.pdf
Regards,
Udaya.

Block upon stock removal indicator in Storage type master data

What is the significance of "Block upon stock removal" in storage type master data. Would it work if the storage type is bulk storage and SUT active?

The config setting with indicator 1 will stop you from creating more TOs for a bin in st type 425 if there are already open picking TO for that bin. In other words lets say you have a stock of material u201C79010460u201D in st type 425 u2013 B20B bin and you have created a picking TO from this bin unless you confirm this TO no more picking/stock removal TOs will be allowed and the bin will be blocked. You can see that block on bin in LS06 transaction. Once the TO is confirmed the block will be lifted automatically from the bin to create new Picking TOs.

SAP Scripts for Stock Removal and Stock Placement ?

Hi All,
Can you please let me know what are the SAP script names and Transaction codes for Stock Removal and Stock Placements ?
Thanks,
Raj

Hi
Tcode is MIGO only (select Goods receipt) and mvt type as
Putaway (305, 315, and so on)
Stock removal (303, 313, and so on)
Transfer posting (301, 311, and so on)
regards
Yogesh

Unrestricted Stock of issuing Storage Location in reservation

Hi Experts,
We have a requirement, we want that unresticted stock of issuing storage location is printed on reservation (MB23) Thru MB25.
How it is possible.
Kindly help me out, can we use sqvi or something else.
Regards
GR

HI ,
Just Modify this Report with the help of a Abaper and ask him to add an additional column in the report that is the Stock in the unrestricted use for this Material and Plant
combination.
TO achieve the Since we know the Material ,plant and storage location
PIck up the Material Number --RESB-MATNR
the Plant code --RESB-WERKS
the storage LOcation--RESB-LGORT
Go to Table RESB table in this table against the Feilds RSNUM -Reservation NUmber and RSPOS( Reservation item number)
IN some cases the storage location would not be entered by the user ,take care ,he enters the storage location by every user ,so make it mandatory in the screen layout.
After Picking up all the three values ,pass those values in the Table.
MARD line item vise present in the reservation (maintain a loop for the same)
in this table pick up value in the Feild MARD-LABST which is the stock in the unrestricted use.
one thing ,i dont know the exact requiremnet ,but it is to resrict the user from creation of reservation more than the stock ,it can be done by avaliability check.
hope so it helps
Regards
Anjanna.

Stock Removal using Pick Point

Hi all,
I have configure Storage Type 100 with SU managed and a pick point ST 001.
Once the TO is generated from delivery, the TO information will be from source ST100 to destination ST916.
So I would like to know, how to identify the SU is arrived pick point? If there any status or information can help me to know the status of TO.
Since i need to identify,
1.SU still in the Source Storage Type (TO open)
2.Worker starts transfer to SU to pick point with liftfork
3.SU arrived Pick point
4.Picker picked the material from pick point (TO picked)
5.Picker transferred the material to GI area (TO transferred and completed)
I dun know how to let user know the status of 2 and 3
Thanks in advance.
David Tai

Hi David,
If the pick point / ID point is defined for SType 100 then during transfer order creation system will automatically stamps the destination storage type as Pick point when it is taking out the stock from Stype 100
I have simulated one scenario where for my storage type 010 the ID point / Pick Point is defined as 011
Stock removal / putaway defined in material master & Stock in Storage bin are as below
& the Putaway / Picking storage type search is defined as
Now for the Transfer order creation i am using the T-Code LT09 (enter the SU number & MvT and system automatically propose 011 as destination storage type in the transfer order
Upon confirmation of the transfer order 0168, use LT09 again to transfer the SU from Pick point to final destination bin and system automatically propose 010 as the final destination storage type
Hope this helps

User Defined Stock Removal Strategy

Hi,
We want to define a user defined stock removal strategy while creating TO for delivery using transaction LT03. This can be done in user exit MWMTO004. Although we modify the output table T_QMAT in this exit as per requirement , the TO is not split as per the table.
SAP proposes all the batch bins in table T_QMAT , but if all the delivery quantity is found in first bin itself , the TO is created with that bin only , no Split. We wish to split the TO as per table T_QMAT.
How to split the TO as per proposal from the exit ?
Please provide some ideas.
Regards,
Tushar

Hello,
You can change the Storage unit type in this exit EXIT_SAPLL03A_005 of TO creation transaction.
I am not sure, If this helps you.
Thanks and Regards
Reddy

How to put bin information to table T_QMAT thru user exit for stock remove?

Hi,
I have already use stock removal strategy 'F' and checked the flag 'User exit active', but the value in table T_QMAT filled by the standard system not include all vendors. So I need to use stock removal strategy " " and set up the table T_QMAT by the user exit.
Do you know what is the user exit and the ABAP coding to put bin information to table T_QMAT for stock removal?
Best Regards,
Chris.

Hi Chris,
You can use the exit: EXIT_SAPLL03A_005 to populate t_qmat table based on your requirements. As you have already mentioned, it is important to check the flag: User exit active in SPRO, but bear in mind the stock removal strategy has to be BLANK. If you use F, then standard SAP auto-populates the T_QMAT table.
Regards,
Narendra.

Block manual stock removal for a storage type

Hi,
Is there any configurational setting where in we can block manual stock removal (i.e creation of TO with mvt type 999) for a particular storage type.
Thanks
Prakash

Hi,
Try using the transaction LS05, give the storage type and the bin range to block all the existing bins.
But i am not sure if there is any setting at the movement type level.
Aktar

Stock removal issue

Similar Messages

Maybe you are looking for