Stock Report as on any date.

i am developing a stock report as on any date where i have to get the closing stock of unrestricted blocked and transit stock as on any date.
i have taken a table mkpf and mseg to get the quantity and date.
i am not getting what all movement type i should use to get the closing stock for unrestricted blocked and transit and what method i shoud use?
please help me out.

Jairaj Kumar ,
Your Report is Little bit complex and time consuming as well.We did a Report same as like you but not Special Stock (means for all of Stock).
For Closing Balance Which will be Opening Balance of next perio/ next day , can be calculated based on DEBIT / Credit inidcator available in the table you are using. This will used of calculate Stock balance. along with movement type for date range.
Hope this will give some info about for ur requirement. Note refer to Tcode MB5L for reference.

Similar Messages

  • Stock report for a specific date.

    Hi Gurus,
    Can any one please tell me if there is any option is SAP by which i can get the stock status for a particular day. I mean if i want to check what was the stock report on last week some day, is there an option in SAP to do that. This report should give the stock of that day and any movements after that day should not be included in that report, for example if 10 quantity of a material was available on 26/03/09 and 5 were either moved or consumed, can i get the status in past for 26/03/09 today as quantity 10 rather than quantity 5 which is available today.
    Regards
    Anoop

    hi,
    Try with t.code MB5B -Stock on Posting date. You can get what you want.
    Regards,
    Prasath

  • CRM Interactive reports not loading any data on WEB UI

    CRM BI client is setup properly by following CRM IR config guide C41.
    /CRMBW/CONFIG_WIZARD doesn't show any major errors. I am able to create
    the custom interactive reports but when these reports are executed no
    data shows up in the report.For example ,we are building interactive
    reports under opportunities area for a user, who has opportunities in
    the system.
    Our CRM Sytem is on CRM7.0 EHP1 SPS3.
    Thanks
    Thirumala

    Hi Thirumala,
    if still relevant (sorry for the late reply): check if the user is assigned to a business partner (employee), which is assignet to a correct position in the CRM Org model, and that this business partner is the employee responsible of the sales documents you want him to see in the reports.
    Alternatively, the user's business partner can be a manager of such an employee.
    Best regards

  • Stock report with grn no & date

    hello gurus,
    I need standard stock reports available in SAP with GRN no. and date.
    points assured*
    Anand

    Hi
    Use MB5B stock on posting date.By using this T code
    1.You see stock on a perticular date
    2.If you give selection date rangeL ex 01.07.2007 to 16.07.2007 then
       It will display Stock as on 01.07.2007
       Stock as on 16.07.2007
       and all the goods movement between 01.07.2007 to 16.07.2007.
    Use MMBE, after executing select Material movements from Environment tab in menu bar.It will also display all the material movements for that material.
    Regards
    Ramakrishna

  • Purchase requisition report not showing any data R12.04

    when i run "Printed Requisitions Report". Report run without any information.
    EBS R12.04

    Please refer to Note: 472332.1 - R12: Printed Requisition Report Ends With "No Data Found"
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=472332.1

  • XL Reporter not getting any data

    <b>Hi</b>
    When I am using XL Composer and generating report using it, I am getting data what the fields I have dragged. Not getting any data when generating same report in organizer from composer except the Title field names. Before I got but now I am not getting.
    <b>STEPS Taken</b>  
                     XL Reporter Composer Tool bar
                     Generate
                     Generate(Window)(Name: given Sample & checked Generate report    then ok)
    And having another problem when generating sample reports I am getting data and when editing that report are preparing new with some fields, I am not getting any data.
    <b>Example:</b>   I have made Edit of Bank Book and placed extra field Document No,   saved the report and generated I am not getting any data except titled fields.
         In new report I have taken BP Code and sales Employee I am not getting any data.
    Please Can any one help me,   It is urgent.
    Thanks in Advance.
    <i><b>Urs
    Sindhu</b></i>

    If you did not select any "total" field (quantities, totals, etc), XL Reporter will show data only at report composer. It will not work at final XL Report itself.
    This is a normal behaviour of XL Reporter, unfortunetaly.
    If you are trying to create a simple list of records, I suggest to use Query Generator, combined to PLD in order to get a formatted report.

  • Invoice History Report not fetching any data without parameters

    Hi
    As per user guide, you can run the Invoice History Report without giving supplier parameter. "If you want to submit the report for one supplier, enter the supplier. Leave this parameter blank to submit the report for all suppliers."
    But when we run the Invoice History Report, if we don't give any supplier, no data is coming in the report. If we give a supplier, data for that supplier is fetched by the report.
    Has anyone faced this issue, is there any solution for this?
    We are on the Oracle Apps 12.1.1 and the version on the report RDF is 120.11.12010000.5
    Thanks!

    Hi,
    could you copy the MDX here ?
    Would you be able to use ST01 / ST05 to trace further details ?
    You can also go into the registry :
    HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\SAP\BW MDX Query Driver
    set the Trace to Yes
    then use the path:
    HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\SAP
    set the "TraceDir" to the path for the logfiles
    Ingo

  • Report not dipalying any data while running using concurrent manager

    Hi:
    I am running a report in oracle 6i reports builder, the report runs perfectly and displays the desired data. But, when the .rdf is attached to concurrent manager and ran from front end, the report is blank. the report output is PDF and i can see oly the headers and the values for all the columns as '0', not sure why this is happening.
    I am assuming that during the PDF conversion some thing is going wrong...any help is much appreciated...
    Thanks for your time...
    Srini...

    This is an Oracle Apps report, right? You'd better go to the eBusiness Suite forum for EBS related questions.

  • BPMon alert reporting not showing any data for Trend Analysis

    Hi,
    I have setup BPMon and performed the initial setup for BW reporting. There are alerts being generated by the BPMon setup and the data has been transferred to the 0SM_BPM cube.
    But when I start the Trend Analysis report I dont get any Solution for selection to generate the trend analysis chart.
    I have followed all the steps mentioned in the setup guide. Please suggest any remedy.
    Regards,
    Vishal

    Hi ,
    If your query is on multiprovider , then makesure to check there are no restrictions/filters on cubes.
    Also inlcude any keyfigure from the cube,where other characteristics are being assigned from or where u r seeing data, in the query.
    If you dont want to see the Keyfigure, u can hide it using keyfigure display properties in the query designer.
    Hope this helps,
    Aparna Duvvuri

  • Firefighter - SoD Violations Report - not showing any data

    We have ECC6 and GRC 5.3 with latest patch. Our RAR is working well also. We recently installed firefighter. All reports are working fine except following two reports,
    1: SoD Violations Report
    2: Critical Transactions
    We want to use RAR critical table and SoD data, therefore In our configuration table we have following paramter set as:
    Critical Transaction Table from Compliance Calibrator (VRAT) = YES
    Could someone please direct in right direction how to get it fixed. Is there any SAP Note suggesting configuration setup etc.
    Thanks in Advance
    Masood Akhter

    There are a number of settings to be made in order to get this working. The note is helpful but effectively you need the following:
    In ECC
    TCP/IP RFC Dest created with a unique report name.
    This RFC mentioned in the /VIRSA/ZRTCNFG transaction
    In RAR
    The Report name entered into the RAR connector.
    The SAP gateway mentioned in the RAR Connectior.
    The RAR connector marked as outbound connection.
    The SAP Adapter activated.
    In SPM (ECC)
    Set the "Connector ID for Risk Analysis" parameter to the name of the RAR Connector in the SPM configuration table.
    You may also have to do a Java system Restart if you encounter error messages when activating the SAP adapter in RAR.
    Simon

  • Network Management Reports not showing any data on scom 2012 r2

    Hello,
    I have imported Windows Server operating system Management Packs and it  started monitoring the windows server system and network adapter state showing healthy state for all the adapter attached to  Virtual Windows Server 2012 Machine.
    but none of data showing on Network Management Reports ,all the other reports are working properly. If  Its need to enable some monitor which are disable by default, pl z list what are the monitors how to enable those monitors?
    May I first need to Deploy agent particularly on network adapter ?
    Regards
    RICHA KM

    Hi,
    I think you could start from here:
    Monitoring Networks by Using Operations Manager
    http://technet.microsoft.com/en-us/library/hh212935.aspx
    System Center Operations Manager 2012: Network Devices with Extended Monitoring Capability
    http://www.microsoft.com/en-us/download/details.aspx?id=26831
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Report Report Interface: No applicable data found

    Hi.
    I m using the Report Report Interface and getting:
    No applicable data found
    while calling in GoTo the second Report.
    While removeing  the filters threre is data .
    What conditions needs to be met that there is data displayed?
    Thank You
    Martin

    Hi,
    Please execute the second report separtely with the same filter with which you are getting 'No applicable data found'.
    Please check whether executing second report gives you any data with same filter or not.
    If it doesn't give , then it means there is no data available to be displayed for that particular filter combination in cube.
    In that case you will have to filter the data which is available in cube or need to load the data as required.
    Regards,
    Amit

  • Batch wise stock report with qty and value as on date

    is there any report so that we can see the stock qty with value as on date,
    i have tried mb5b but it is showing only qty and batch combination not qty value and batch combination
    plz suggest me, it is very urgent.
    nitin

    MBEWH is the valuation history, this is only updated with the first movement after a period closure. And the period is a month.
    There is no table in SAP that holds the stock information on daily basis.
    You have to develope this yourself. Easiest method by copying a table like MBEW and MARD  daily to a Z-Table.
    A stock situation  at a certain date can be calculated with MB5B.
    Edited by: Jürgen L. on Aug 5, 2008 4:06 PM

  • Stock report for a period (based on posting date)

    Hi Experts,
    We have a requirement as under:
    1) We want a report for a period say from 01.04.2011 to 30.09.2011 (closed period for both MM and FI postings). Report is being taken on a later date say 01.12.2011.
    2) The report should say the status of stock as of 30.09.2011 only even of being taken in the month of December
    3) I tried to take the desired report through MB5B for the period 30.09.2011 to 30.09.2011 (selection date fields) on 20th december, 2011 and noticed that if same report with the same selection criteria is taken at two different times, output data is not the same whereas MM and FI posting periods are already closed.
    Can anybody suggest alternative SAP standard report where output will remain the same if report with same selection criteria is taken at different intervals ELSE in case of change we should be able to see the documents posted in between if back dated entries have been posted after opening MM /FI period.
    thanks

    sure it speaks the same, but it mentions as well the reasons (1) and has much more information (2)  and a solution.(3)
    1)
    user starts transaction MB5B for a very large number of materials or for all materials in a plant
    During the runtime of transaction MB5B, goods movements are posted in parallel:
               - The results of transaction MB5B are incorrect.
               - Each run of transaction MB5B returns different results for the same combination of "material + plant".
    Example: Transaction MB5B should process 100 materials with 10,000 MM documents each. The system takes approximately 1 second to read the material master data  and it takes approximately 1 hour to read the MM and FI documents. A goods movement for a material to be processed is posted approximately 10 minutes after you start transaction MB5B. The stock for this material before this posting has already been determined. The new MM document is also read, however. The stock read before the posting is used as the basis for calculating the stocks for the start and end date.
    Even for an old and closed period, MB5B starts today and calculates backwards  any movement to finally get the stock for  the time your specified in your selection.
    2)
    The SAP standard release does not include a solution
    so you have to understand that there is no real alternative transaction in SAP
    3) and then they provide a large section with a workaround that can be developed by an experienced programmer within 3 to 5 days.
    So how shall anyone here be able to tell you an alternative report?
    if someone does, then it is an owndeveloped z-report which is not available in your sap system.
    if you know that people want lookup period closing stocks at any time in future, then either schedule MB52 at month end and store the list somewhere (and do not allow backposting)
    or have an Abaper create a stock report based on the history tables MARDH, MCHBH, MBEWH etc.
    And even here you may encounter an issue at some day, if you start archving special stocks or material masters, because then the stock figures from the historic tables are gone and you cannot rebuilt a reliable stock report .

  • Stock report with value and qauntity for given date not month wise

    Hi gems,
    can any body give me the standard report for Stock value and qauntity for given date not month wise at storage location level

    Hi
    check the report S_P00_07000139 with the option inventory and raw material report- detail and selection date (from, to date same). List will give opening & closing balances with goods movment and their values.
    Thanks

Maybe you are looking for

  • How can I show viewers of my projected iPad screen where my fingers are touching the screen?

    So Keynote shows a cool "laser pointer" when you hold your finger against the screen in presentaiton mode.... I'd like to use a similar "laser pointer" effect to show where my fingers are touching the screen in any application -- and, yes, where ther

  • Alt left selection inconsistency

    I will demonstrate this by an example: "I like ice cream." Problem one If I place the cursor just to the right of "ice" and presses in sequence: shift+alt+left then shift+left "_ice_" becomes selected instead of the expected "_ice". When done the mir

  • How to set bat file for commands

    i have to set below all commands in bat file and run in particular time.i am not able to do.please let me know how i can do two node rac 10.2.0.4 windows note---how to enter rac forum in this oracle forums................pls give url echo %date% %tim

  • Holiday Schedules and Time Periods

    Currently at our company, we have a 24 hour travel line. We have been able to use Time Period/Schedule and Partitions in CUCM to forward to different offices at different hours throughout the day. Below is what it is currently set up as. Monday Tuesd

  • My music button won't work.

    updated my iphone to ios7 and everything was fine. but when i tried to use the music buttons to skip/play songs, the buttons won't work. as in i'm not able to skip or play a song. i have to go to the music icon and do it from there. can someone help?