Stock report in different of measurements.
Hi dudes,
i want to get stock of materials in 2 other UOMs along with base unit of measurement ( Base UOM which normally comes).
suppose base UOM is PC and sales unit is M2 ( sq.mtr)
and i need report in which stock should be appeared in PC, M2 and M3 also.
in report like MB51,MB5B etc, what is to done
whether we need to maintain conversion formula for M3 and PC.
i would appreciate quick response.
regards
Robert
Hi,
Base unit is the only stock keeping unit. The stock is always calculated on the basis of base UOM. Other units are Issue unit or order unit. Those are not stock keeping unit.
But in MMBE if the conversion ratio is maintained then stock can be viewed in those units also. But not at a time.
Regards
Amit PArkhi
Similar Messages
-
OBIEE - Reporting using different time measures - year - month
I have a request where the user wants to enter in an account period (YYYYMM - example: 200911). The report should display the YTD amount up to the end of that month, the same YTD amount for last year, and then show the amount for that month and the amount for the same month last year. So basically it would be:
YTD Amount (Year: 2009 Months: Between 1 and 11)
YTD Amount Last Year (Year :2008 Months: Between 1 and 11)
Month Amount (Year: 2009 Month: 11)
Month Amount Last Year (Year: 2008 Month:11)
I can get these to work independently. Like I can get the YTDs to work by themselves and the Months to work by themselves. I just can't get them both on the same report. I have tried setting these as level based measures, but when I do, the YTD Amounts are displaying the amount for the entire year (pulling in December data).
Any advice on how to achieve this?
Thanks.Hi Raghu
Could you pls. let me know , the syntax how to use this.
User would select Year and Month from the Prompt and measures should be rolloup for the last year YTD. e.g the fiscal calendar is Apr - Mar . so if user selects 2012 - Jan , then last yr YTD should be caluclated from 2010-Apr to 2011 Jan.
Regds -
Stock report for single material contains different material groups
Hi Experts,
I have a scenario.I want to maintain material group for a material at the time of po creation.In next time i will maintain different material group for the same material.
But I want to view the the stocks for material group wise which i entered in po.Is it possible to achieve this?
Please suggest solution.
Thanks & Regards,
Deepika.Please read the KBA document 2012912 - Changeablility of the field "material group" in purchasing documents
It clearly says that material group can't be changed in case you will use material master in purchase order.
So, it is clear that you can't use different material group for material master in purchase order.
For stock report, system will only show you the material group which is assigned to the material master (MARA-MATKL). System will not look into the purchase order section (like EKPO). -
Sub:Stock report with sales unit of measurement - reg.,
Hi guru's
we have a requirement to have the stock report with sales unit of measure instead of base unit of measure can anybody guide me how to do this.
thanks in advance
tulja singh.From std. , I think your requirement can not satisfied.
Make customized report.
Take the help of ABAPER. -
Dear all,
I would like to know if there is in SAP a Massive Stock Report in which you can see the stock in different units of measure at the same time.
MMBE and MB52 don't satisfy my requirement, because MMBE is not for massive stock, you can only see one material at a time. And in MB52, i can see different materials at the same time but only one unit of measure.
Is this a missing functionality?
Thank you!Hola Eduardo,
Te envío un link con todos los reportes relacionados a MM entre otras cosas. Quizá haya alguno que cubra tu requermiento.
http://wiki.sdn.sap.com/wiki/display/ERPLO/SAP%20Standard%20Reports
Saludos -
Material Stock Report for tcode MB5B
Hello Expert
I have a SAP report for stock posting date with T-Code as MB5B and
the report name is RM07MLBD.
When I enter Material no, plant code , Movement type (101) and selection
dates for a month, The report is displaying but not break by Movement type instead it is showing all the movement type....?
Can anyone have idea about this
REPORT RM07MLBD NO STANDARD PAGE HEADING MESSAGE-ID M7 LINE-SIZE 95.
REPORT RM07MLBD (Transaktionscode MB5B) *
correction June 2004 MM "n747306
wrong the assignment of the MM and FI documents for data "n747306
constellation : n MM doc items --> 1 FI doc item "n747306
ABAP-Preprocessor removed "n599218 A
- this version is for release 4.6C and higher "n599218 A
- process database table OBEW always "n599218 A
- IS-OIL specific functions : "n599218 A
- define IS-OIL workings fields "n599218 A
- transport and process these fields only when "n599218 A
structure MSEG comprise these fields "n599218 A
Improvements : Dec. 2003 MM "n599218
- print the page numbers "n599218
"n599218
- send warnings and error messages only when report is "n599218
launched / advoid warnings when user changes entries on "n599218
the selection screen "n599218
- send warning M7 689 when user does not restrict the "n599218
database in dialog or print mode "n599218
- send warning M7 393 when user deletes the initial "n599218
display variant "n599218
"n599218
- allow to process the fields MAT_KDAUF, MAT_KDPOS, and "n599218
MAT_PSPNR from release 4.5B and higher "n599218
"n599218
- show the current activity and the progress "n599218
"n599218
- error message 'programmfehler' improved "n599218
"n599218
- new categories for scope of list "n599218
"n599218
- use function module for database commit for the update "n599218
of the parameters in table ESDUS. This allows to record "n599218
this transaction for a batch input session using "n599218
transaction SHDB "n599218
"n599218
- reset the entries for plant when valuation level is "n599218
is company code and mode is valuated stock "n599218
"n599218
- enable this report to run in the webreporting mode "n599218
Dec. 2002 MM "n571473
the definition of the selection screen moved from include "n571473
RM07MLBP into this report "n571473
Sept 2002 MM "n555246
log function tax auditor "n555246
note 547170 : August 2002 MM "n547170
- representation of tied empties improved "n547170
active this function automatically in retail systems "n547170
- FORM routines without preprocessor commands and without "n547170
text elements moved to the new include reports "n547170
RM07MLBD_FORM_01and RM07MLBD_FORM_02 "n547170
- the function module FI_CHECK_DATE of note 486477 will "n547170
be processed when it exists "n547170
- function and documentation of parameter XONUL improved "n547170
- display MM documents with MIGO or MB03 depending from "n547170
the release "n547170
- get and save the parameters per user in dialog mode "n547170
only in release >= 4.6 "n547170
the following items were improved with note 497992 "n497992
- wrong results when remaining BSIM entries contain "n497992
an other quantity unit as material master MEINS "n497992
- improve check FI summarization "n497992
- the messages M7 390, M7 391, and M7 392 "n497992
- definition of field g_f_repid for all releases "n497992
- incomplete key for access of internal table IT134M "n497992
causes wrong plant selection "n497992
- the function "no reversal movement" did not surpress "n497992
the original movements; fields "SJAHR" was moved from "n497992
from report RM07MLBD_CUST_FIELDS to RM07MLBD "n497992
- process valuated subcontractor stock from database "n497992
table OBEW if it exists "n497992
- if FI summarization is active process warning M7 390 "n497992
for stock type = valuated stock "n497992
- the user wants to restrict the movement type : process "n497992
warning M7 391 "n497992
- the user wants to surpress the reversal movements : "n497992
process warning M7 392 "n497992
- consider special gain/loss-handling of IS-OIL "n497992
- automatic insert of field WAERS currency key into the "n497992
field catalogue : "n497992
- at least one ref. field is active -> WAERS active "n497992
- all reference fields are hidden -> WAERS hidden "n497992
- the length of sum fields for values was increased "n497992
- customizing for the selection of remaining BSIM entries "n497992
- customizing for the processing of tied empties "n497992
separate time depending authorization for tax auditor "n486477
additional fields are displayed in wrong format "n480130
report RM07MLBD and its includes improved Nov 2001 "n451923
- merging FI doc number into table G_T_MSEG_LEAN improved "n451923
- handling of the short texts improved "n451923
- some types and data definitions -> include RM07MLDD "n451923
error for split valuation and valuated special stock "n450764
process 'goods receipt/issue slip' as hidden field "n450596
error at start date : material without stock has value "n443935
wrong results for docs with customer consignment "W" "n435403
error during data selection for plants "n433765
report RM07MLBD and its includes improved May 10th, 2001 "n400992
!!! IMPORTANT : DO NOT CHANGE OR DELETE THE COMMENT LINES !!! *
- consider the material number during looking for FI documents
- field "g_cust_color" in include report "RM07MLBD_CUST_FIELDS"
allows the customer to activate or inactivate the colors in the
lines with the documents.
- error during calcuation of start stock for special stock "M"
- valuted stocks required : no documents found ? continue and
process empty document table
- the length of sum fields for quantities has been increased
to advoid decimal overflow
- table ORGAN is replaced by G_T_ORGAN
- it is filled by the following ways :
- at process time at selection screen if the
user wants the selection via cc or plant
- otherwise after the database selection of the stock
tables
- it contains less data fields
- it contains all entries twice, for binary search
with plant or valuation area
- selection of databases MKPF and MSEG in one SELECT
command with an inner JOIN
- authority checks after the database selections
- result of database selection from the both database tables
MSEG and MKPF in working table G_F_MSEG_LEAN instead of
the tables IMSEG and IMKPF
- the number of processed data fields was reduced
- the user has the possibility to increase the number of
the processed fields deleting the '*' in the types-command
in include report RM07MLBD_CUST_FIELDS
- the creation of the field catalog for the ALV considers
only the fields of structure G_S_MSEG_LEAN
- the new table G_T_BELEG contains the results for the ALV.
the number of fields of table G_T_BELEG corresponds with
the number of fields of table G_T_MSEG_LEAN.
- the functions "define breakdown" and "choose" are inactivated
in the menue, because they are are not carried out correctly
in all blocks of the list
Anzeige der Materialbestände in einem Zeitintervall *
Der Report gliedert sich im wesentlichen in folgende Verarbeitungs- *
blöcke: *
1) Definition des Einstiegsbildes und Vorbelegung einzelner *
Selektionsfelder, sowie Prüfung der eingegebenen Selektions- *
parameter und Berechtigungsprüfung *
2) Lesen der aktuellen Bestandswerte *
3) Lesen und Verarbeiten der Materialbelege *
4) Berechnung der Bestandswerte zu den vorgegebenen Datümern *
5) Ausgabe der Bestände und Materialbelege *
*eject
*# APP_CALL_DECLARE TEST
this definitions depend on the release
TYPE-POOLS: IMREP, " Typen Bestandsführungsreporting
SLIS. " Typen Listviewer
for the selection of the reversal movements only in release >=45B
DATA: BEGIN OF STORNO OCCURS 0,
MBLNR LIKE MSEG-MBLNR,
MJAHR LIKE MSEG-MJAHR,
ZEILE LIKE MSEG-ZEILE,
SMBLN LIKE MSEG-SMBLN,
SJAHR LIKE MSEG-SJAHR,
SMBLP LIKE MSEG-SMBLP,
END OF STORNO.
include: rm07mldd, " reportspezifische Datendefinitionen
rm07grid. " Gitternetz, Formatierung, Farbgebung
INCLUDE RM07APP1. "ABAP-PREPROCESSOR "TEST
"n571473
define the selection screen here "n571473
"n571473
SELECTION-SCREEN BEGIN OF BLOCK Database-selection
WITH FRAME TITLE TEXT-001.
Text-001: Datenbankabgrenzungen
SELECT-OPTIONS: MATNR FOR MARD-MATNR MEMORY ID MAT
MATCHCODE OBJECT MAT1,
BUKRS FOR T001-BUKRS MEMORY ID BUK,
WERKS FOR T001W-WERKS MEMORY ID WRK,
LGORT FOR T001L-LGORT,
CHARG FOR MCHB-CHARG,
BWTAR FOR MBEW-BWTAR,
BWART FOR MSEG-BWART.
PARAMETERS SOBKZ LIKE MSEG-SOBKZ.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS: DATUM FOR MKPF-BUDAT NO-EXTENSION.
Datumsintervall für Selektion
SELECTION-SCREEN END OF BLOCK Database-selection.
SELECTION-SCREEN BEGIN OF BLOCK BESTANDSART
WITH FRAME TITLE TEXT-002.
Text-002: Bestandsart
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS LGBST LIKE AM07M-LGBST RADIOBUTTON GROUP BART DEFAULT 'X'.
SELECTION-SCREEN COMMENT 4(50) TEXT-010 FOR FIELD LGBST.
Text-010: Lagerort-/Chargenbestand
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS BWBST LIKE AM07M-BWBST RADIOBUTTON GROUP BART.
SELECTION-SCREEN COMMENT 4(50) TEXT-011 FOR FIELD BWBST.
Text-011: bewerteter Bestand
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS SBBST LIKE AM07M-SBBST RADIOBUTTON GROUP BART.
SELECTION-SCREEN COMMENT 4(50) TEXT-012 FOR FIELD SBBST.
Text-012: Sonderbestand
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK BESTANDSART.
improved definition of parameters for scope of list "n599218
SELECTION-SCREEN BEGIN OF BLOCK listumfang
with frame title text-003. "Listumfang
the following 3 parameters became obsolete do not use "n599218
anymor. They are still here to inform the user about "n599218
that he is using old variants or SUBMIT commands "n599218
PARAMETERS : "n599218
XONUL LIKE AM07M-XONUL no-display, "n599218
XVBST LIKE AM07M-XVBST no-display, "n599218
XNVBST LIKE AM07M-XNVBS no-display. "n599218
7 new categories for the scope of list "n599218
"n599218
cat. I docs I stock on I I stock on I Parameter "n599218
I I start date I I end date I "n599218
---+--+--------++------+-------- "n599218
1 I yes I = zero I = I = zero I pa_wdzer "n599218
2 I yes I = zero I <> I <> zero I pa_wdzew "n599218
3 I yes I <> zero I <> I = zero I pa_wdwiz "n599218
4 I yes I <> zero I <> I <> zero I pa_wdwuw "n599218
5 I yes I <> zero I = I <> zero I pa_wdwew "n599218
I I I I I "n599218
6 I no I = zero I = I = zero I pa_ndzer "n599218
7 I no I <> zero I = I <> zero I pa_ndsto "n599218
"n599218
definition of the pushbutton : show or hide the following "n599218
parameters for the scope of list "n599218
SELECTION-SCREEN PUSHBUTTON /1(20) PB_LIU "n599218
USER-COMMAND LIU. "n599218
"n599218
text line : materials with movements "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN COMMENT 1(55) TEXT-072 "n599218
modif id liu. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
with movements / start = zero = end = zero "n599218
1 I yes I = zero I = I = zero I pa_wdzer "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN POSITION 2. "n599218
PARAMETERS : pa_wdzer LIKE AM07M-MB5B_XONUL "n599218
modif id liu. "n599218
text-083 : no opening stock ; no closing stock "n599218
SELECTION-SCREEN COMMENT 5(70) text-083 "n599218
FOR FIELD pa_wdzer "n599218
modif id liu. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
with movements / start = zero = end <> zero "n599218
2 I yes I = zero I <> I <> zero I pa_wdzew "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN POSITION 2. "n599218
PARAMETERS : pa_wdzew LIKE AM07M-MB5B_XONUL "n599218
modif id liu. "n599218
text-084 : no opening stock ; with closing stock "n599218
SELECTION-SCREEN COMMENT 5(70) text-084 "n599218
FOR FIELD pa_wdzew "n599218
modif id liu. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
with movements / start stock <> 0 / end stock = 0 "n599218
3 I yes I <> zero I <> I = zero I pa_wdwiz "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN POSITION 2. "n599218
PARAMETERS : pa_wdwiz LIKE AM07M-MB5B_XONUL "n599218
modif id liu. "n599218
text-085 : with opening stock ; no closing stock "n599218
SELECTION-SCREEN COMMENT 5(70) text-085 "n599218
FOR FIELD pa_wdwiz "n599218
modif id liu. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
with movements / with start and end stocks / different "n599218
4 I yes I <> zero I <> I <> zero I pa_wdwuw "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN POSITION 2. "n599218
PARAMETERS : pa_wdwuw LIKE AM07M-MB5B_XONUL "n599218
modif id liu. "n599218
with opening stock ; with closing stock ; changed "n599218
SELECTION-SCREEN COMMENT 5(70) text-086 "n599218
FOR FIELD pa_wdwuw "n599218
modif id liu. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
with movements / with start and end stock / equal "n599218
5 I yes I <> zero I = I <> zero I pa_wdwew "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN POSITION 2. "n599218
PARAMETERS : pa_wdwew LIKE AM07M-MB5B_XONUL "n599218
modif id liu. "n599218
with opening stock ; with closing stock ; non-changed "n599218
SELECTION-SCREEN COMMENT 5(70) text-087 "n599218
FOR FIELD pa_wdwew "n599218
modif id liu. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
text line : materials without movements "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN COMMENT 1(55) TEXT-073 "n599218
modif id liu. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
materials without movements / stocks = zero "n599218
6 I no I = zero I = I = zero I pa_ndzer "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN POSITION 2. "n599218
PARAMETERS : pa_ndzer LIKE AM07M-MB5B_XONUL "n599218
modif id liu. "n599218
text-083 : no opening stock ; no closing stock "n599218
SELECTION-SCREEN COMMENT 5(70) text-083 "n599218
FOR FIELD pa_ndzer "n599218
modif id liu. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
materials without movements / with start or end stock "n599218
7 I no I <> zero I = I <> zero I pa_ndsto "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN POSITION 2. "n599218
PARAMETERS : pa_ndsto LIKE AM07M-MB5B_XONUL "n599218
modif id liu. "n599218
with opening stock ; with closing stock ; non-changed "n599218
SELECTION-SCREEN COMMENT 5(70) text-087 "n599218
FOR FIELD pa_ndsto "n599218
modif id liu. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
SELECTION-SCREEN END OF BLOCK listumfang.
SELECTION-SCREEN BEGIN OF BLOCK EINSTELLUNGEN
WITH FRAME TITLE TEXT-068. "Settings
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 1.
PARAMETERS XSUM LIKE AM07M-XSUM.
SELECTION-SCREEN COMMENT 4(50) TEXT-019 FOR FIELD XSUM.
Text-019: nur Summen
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 1.
PARAMETERS XCHAR LIKE AM07M-XCHRG.
SELECTION-SCREEN COMMENT 4(50) TEXT-015 FOR FIELD XCHAR.
Text-015: nur chargenpflichtige Materialien
Das Kennzeichen 'xchar' bestimmt die Art der Listausgabe entweder
auf Material- oder Chargenebene.
SELECTION-SCREEN END OF LINE.
the function "No reversal movements" is only "n571473
available from relaese 4.5B and higher "n571473
( TEXT-026 : No reversal movements ) "n571473
SELECTION-SCREEN BEGIN OF LINE. "n571473
SELECTION-SCREEN POSITION 1. "n571473
PARAMETERS NOSTO LIKE AM07M-NOSTO. "n571473
SELECTION-SCREEN COMMENT 4(50) TEXT-026 "n571473
FOR FIELD NOSTO. "n571473
SELECTION-SCREEN END OF LINE. "n571473
SELECTION-SCREEN END OF BLOCK EINSTELLUNGEN.
SELECTION-SCREEN BEGIN OF BLOCK LISTE WITH FRAME TITLE TEXT-040.
PARAMETERS: P_VARI LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF BLOCK LISTE.
*eject
new data definitions
working fields for reading structures from DDIC "n599218 A
and check whether IS-OIL is active "n599218 A
types : stab_x031l type standard table of x031l "n599218 A
with default key. "n599218 A
"n599218 A
data : g_s_x031l type x031l, "n599218 A
g_t_x031l type stab_x031l. "n599218 A
"n599218 A
data : g_f_dcobjdef-name like dcobjdef-name, "n599218 A
g_flag_is_oil_active(01) type c, "n599218 A
g_cnt_is_oil type i. "n599218 A
contains the a structure with the max. number of fields of
the database table MSEG, but those lines are comment lines
with a '*'. The customer can achtivate those lines.
The activated fields will be selected from the database table
and are hidden in the list. With the settings in the display
variant the can be shown.
INCLUDE RM07MLBD_CUST_FIELDS.
common types structure for working tables
a) g_t_mseg_lean results form database selection
b) g_t_beleg data table for ALV
TYPES : BEGIN OF STYPE_MSEG_LEAN,
MBLNR LIKE MKPF-MBLNR,
MJAHR LIKE MKPF-MJAHR,
VGART LIKE MKPF-VGART,
BLART LIKE MKPF-BLART,
BUDAT LIKE MKPF-BUDAT,
CPUDT LIKE MKPF-CPUDT,
CPUTM LIKE MKPF-CPUTM,
USNAM LIKE MKPF-USNAM,
process 'goods receipt/issue slip' as hidden field "n450596
XABLN LIKE MKPF-XABLN, "n450596
LBBSA LIKE T156M-LBBSA,
BWAGR LIKE T156S-BWAGR,
BUKRS LIKE T001-BUKRS,
BELNR LIKE BKPF-BELNR,
GJAHR LIKE BKPF-GJAHR,
WAERS LIKE MSEG-WAERS,
ZEILE LIKE MSEG-ZEILE,
BWART LIKE MSEG-BWART,
MATNR LIKE MSEG-MATNR,
WERKS LIKE MSEG-WERKS,
LGORT LIKE MSEG-LGORT,
CHARG LIKE MSEG-CHARG,
BWTAR LIKE MSEG-BWTAR,
KZVBR LIKE MSEG-KZVBR,
KZBEW LIKE MSEG-KZBEW,
SOBKZ LIKE MSEG-SOBKZ,
KZZUG LIKE MSEG-KZZUG,
BUSTM LIKE MSEG-BUSTM,
BUSTW LIKE MSEG-BUSTW,
MENGU LIKE MSEG-MENGU,
WERTU LIKE MSEG-WERTU,
SHKZG LIKE MSEG-SHKZG,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
DMBTR LIKE MSEG-DMBTR,
DMBUM LIKE MSEG-DMBUM,
XAUTO LIKE MSEG-XAUTO,
KZBWS LIKE MSEG-KZBWS,
special flag for retail "n497992
retail(01) type c, "n497992
define the fields for the IO-OIL specific functions "n599218 A
mseg-oiglcalc CHAR 1 "n599218 A
mseg-oiglsku QUAN 13 "n599218 A
oiglcalc(01) type c, "n599218 A
oiglsku(07) type p decimals 3, "n599218 A
insmk like mseg-insmk, "n599218 A
the following fields are used for the selection of
the reversal movements
SMBLN LIKE MSEG-SMBLN, " No. doc
SJAHR LIKE MSEG-SJAHR, " Year "n497992
SMBLP LIKE MSEG-SMBLP. " Item in doc
additional fields : the user has the possibility to activate
these fields in the following include report
INCLUDE TYPE STYPE_MB5B_ADD.
TYPES : END OF STYPE_MSEG_LEAN.
TYPES: STAB_MSEG_LEAN TYPE STANDARD TABLE OF STYPE_MSEG_LEAN
WITH KEY MBLNR MJAHR.
data tables with the results for the ALV
TYPES : BEGIN OF STYPE_BELEGE.
INCLUDE TYPE STYPE_MSEG_LEAN.
TYPES : FARBE TYPE SLIS_T_SPECIALCOL_ALV.
TYPES : END OF STYPE_BELEGE.
TYPES : STAB_BELEGE TYPE STANDARD TABLE OF STYPE_BELEGE
WITH KEY BUDAT MBLNR ZEILE.
DATA : G_T_BELEGE TYPE STAB_BELEGE WITH HEADER LINE,
G_T_BELEGE1 TYPE STAB_BELEGE WITH HEADER LINE.
global working areas data from MSEG and MKPF
FIELD-SYMBOLS : TYPE STYPE_MSEG_LEAN.
DATA : G_S_MSEG_LEAN TYPE STYPE_MSEG_LEAN,
G_S_MSEG_UPDATE TYPE STYPE_MSEG_LEAN, "n443935
G_T_MSEG_LEAN TYPE STAB_MSEG_LEAN.
working table for the control break "n451923
types : begin of stype_mseg_work. "n451923
include type stype_mseg_lean. "n451923
types : tabix like sy-tabix, "n451923
end of stype_mseg_work, "n451923
"n451923
stab_mseg_work type standard table of "n451923
stype_mseg_work "n451923
with default key. "n451923
"n451923
data : g_t_mseg_work type stab_mseg_work, "n443935
g_s_mseg_work type stype_mseg_work. "n443935
working table for the requested field name from MSEG and MKPF
TYPES: BEGIN OF STYPE_FIELDS,
FIELDNAME TYPE NAME_FELD,
END OF STYPE_FIELDS.
TYPES: STAB_FIELDS TYPE STANDARD TABLE OF STYPE_FIELDS
WITH KEY FIELDNAME.
DATA: G_T_MSEG_FIELDS TYPE STAB_FIELDS,
G_S_MSEG_FIELDS TYPE STYPE_FIELDS.
working table for the requested numeric fields of MSEG
types : begin of stype_color_fields,
FIELDNAME TYPE NAME_FELD,
type(01) type c,
end of stype_color_fields,
stab_color_fields type standard table of
stype_color_fields
with default key.
data: g_t_color_fields type stab_color_fields
with header line.
DATA: BEGIN OF IMSWEG OCCURS 1000,
MBLNR LIKE MSEG-MBLNR,
MJAHR LIKE MSEG-MJAHR,
ZEILE LIKE MSEG-ZEILE,
MATNR LIKE MSEG-MATNR,
CHARG LIKE MSEG-CHARG,
BWTAR LIKE MSEG-BWTAR,
WERKS LIKE MSEG-WERKS,
LGORT LIKE MSEG-LGORT,
SOBKZ LIKE MSEG-SOBKZ,
BWART LIKE MSEG-BWART,
SHKZG LIKE MSEG-SHKZG,
XAUTO LIKE MSEG-XAUTO,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
DMBTR LIKE MSEG-DMBTR,
DMBUM LIKE MSEG-DMBUM,
BUSTM LIKE MSEG-BUSTM,
BUSTW LIKE MSEG-BUSTW, "147374
define the fields for the IO-OIL specific functions "n599218 A
mseg-oiglcalc CHAR 1 "n599218 A
mseg-oiglsku QUAN 13 "n599218 A
oiglcalc(01) type c, "n599218 A
oiglsku(07) type p decimals 3, "n599218 A
insmk like mseg-insmk, "n599218 A
END OF IMSWEG.
User settings for the checkboxes "n547170
DATA: oref_settings TYPE REF TO cl_mmim_userdefaults. "n547170
*eject
HAUPTPROGRAMM *********************************
F4-Hilfe für Reportvariante -
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
"n599218
INITIALIZATION "n599218
"n599218
"n599218
pay attentions : this process time will not be processed "n599218
in the webreporting mode "n599218
INITIALIZATION.
PERFORM APP_PROCESS USING 'ME'. "TEST
PERFORM initialisierung.
get the parameters from the last run "n547170
perform esdus_get_parameters. "n547170
set flag when INITILIZATION is processed
move 'X' to g_flag_initialization.
"n599218
AT SELECTION-SCREEN "n599218
"n599218
Prüfung der eingegebenen Selektionsparameter, -
Berechtigungsprüfung -
AT SELECTION-SCREEN.
the following 3 parameters XONUL, XVBST, and XNVBST "n599218
became obsolete; send error when they should be filled. "n599218
This could be possible if the user works with old "n599218
selection variants or this report is launched by a "n599218
SUBMIT command "n599218
if XONUL is initial and "n599218
XVBST is initial and "n599218
XNVBST is initial. "n599218
ok, the old parameters are empty "n599218
else. "n599218
text-088 : note 599218 : obsolete parameter used "n599218
MESSAGE E895 with text-088. "n599218
endif.
did the user hit the pushbutton "Category" ? "n599218
case SSCRFIELDS-UCOMM. "n599218
when 'LIU '. "n599218
yes, the pushbutton "Category" was hit "n599218
IF g_flag_status_liu = C_HIDE. "n599218
show the 7 parameters on the selection srceen "n599218
MOVE C_SHOW TO g_flag_status_liu. "n599218
ELSE. "n599218
hide the 7 paramaters "n599218
MOVE C_HIDE TO g_flag_status_liu. "n599218
ENDIF. "n599218
ENDcase. "n599218
"n599218
go on only if the user wants to launch this report "n599218
check : sy-ucomm = 'ONLI' or "n599218
sy-ucomm = 'PRIN' or "n599218
sy-ucomm = 'SJOB'. "n599218
PERFORM eingaben_pruefen.
check whether FI summarization is active and other "n547170
restrictions could deliver wrong results "n547170
perform f0800_check_restrictions. "n547170
- the user wants to surpress the reversal movements : "n497992
process warning M7 392 "n497992
IF NOT NOSTO IS INITIAL. "n497992
emerge warning ? "n497992
CALL FUNCTION 'ME_CHECK_T160M' "n497992
EXPORTING "n497992
I_ARBGB = 'M7' "n497992
I_MSGNR = '392' "n497992
EXCEPTIONSPlease read the KBA document 2012912 - Changeablility of the field "material group" in purchasing documents
It clearly says that material group can't be changed in case you will use material master in purchase order.
So, it is clear that you can't use different material group for material master in purchase order.
For stock report, system will only show you the material group which is assigned to the material master (MARA-MATKL). System will not look into the purchase order section (like EKPO). -
Stock report for a period (based on posting date)
Hi Experts,
We have a requirement as under:
1) We want a report for a period say from 01.04.2011 to 30.09.2011 (closed period for both MM and FI postings). Report is being taken on a later date say 01.12.2011.
2) The report should say the status of stock as of 30.09.2011 only even of being taken in the month of December
3) I tried to take the desired report through MB5B for the period 30.09.2011 to 30.09.2011 (selection date fields) on 20th december, 2011 and noticed that if same report with the same selection criteria is taken at two different times, output data is not the same whereas MM and FI posting periods are already closed.
Can anybody suggest alternative SAP standard report where output will remain the same if report with same selection criteria is taken at different intervals ELSE in case of change we should be able to see the documents posted in between if back dated entries have been posted after opening MM /FI period.
thankssure it speaks the same, but it mentions as well the reasons (1) and has much more information (2) and a solution.(3)
1)
user starts transaction MB5B for a very large number of materials or for all materials in a plant
During the runtime of transaction MB5B, goods movements are posted in parallel:
- The results of transaction MB5B are incorrect.
- Each run of transaction MB5B returns different results for the same combination of "material + plant".
Example: Transaction MB5B should process 100 materials with 10,000 MM documents each. The system takes approximately 1 second to read the material master data and it takes approximately 1 hour to read the MM and FI documents. A goods movement for a material to be processed is posted approximately 10 minutes after you start transaction MB5B. The stock for this material before this posting has already been determined. The new MM document is also read, however. The stock read before the posting is used as the basis for calculating the stocks for the start and end date.
Even for an old and closed period, MB5B starts today and calculates backwards any movement to finally get the stock for the time your specified in your selection.
2)
The SAP standard release does not include a solution
so you have to understand that there is no real alternative transaction in SAP
3) and then they provide a large section with a workaround that can be developed by an experienced programmer within 3 to 5 days.
So how shall anyone here be able to tell you an alternative report?
if someone does, then it is an owndeveloped z-report which is not available in your sap system.
if you know that people want lookup period closing stocks at any time in future, then either schedule MB52 at month end and store the list somewhere (and do not allow backposting)
or have an Abaper create a stock report based on the history tables MARDH, MCHBH, MBEWH etc.
And even here you may encounter an issue at some day, if you start archving special stocks or material masters, because then the stock figures from the historic tables are gone and you cannot rebuilt a reliable stock report . -
Stock report in BW (valuated stock and Storage Location level)
Dear All,
Regards.We got an situation here,
Case 1: R3 (MB5B) (Both "Storage loc" and "Valuated stock" shows the same Stock Qty)
1).The BW Stock Report shows values the Correct Values for "Receipt Qty" and "Issue Qty" with the Correct "Quantity total Stock" aswell.
Case 2 : R3 (MB5B) (Stock is different between "Storage Loc" and "Valuated Stock")
1).The BW Stock Report shows the "Quantity Total Stock according to VALUATED STOCK Level(MB5B),but the "Receipt Qty" and "Issue Qty" according to STORAGE LOCATION Level(MB5B) .
We followed the "How to Handle Inventory "Doc with the proper sequence of Loading of Infosources and Compression.The data is sitting fine at the cube level.
It would be great if someone can throw some Light on this issue,on how the Query shows a COMBO of both Valuated stock and Storage Location stock....Held up with this issue for quite sometime..Had a look at the Oss Note (589024)...........
Manythanks
ArunHI,
In Inventory we have two quantity fields given to satisfy the requirement.
Valuated stock Qty - 0VALSTCKQTY
Storage Location qty - 0TOTALSTCK
You can make use of them based on your requirement. Hope this helps for you.
Thanks,
Arun -
Hi,
We need a stock report which would mention the GRPO No. and the vendor's name from whom the stock has been bought. If the same item has been bought from two different vendors, then we would like to know the quantity in hand out of the inwarded quantity from various GRPOs from different vendors. Also, for material received from production, we need to know the GRPO No. of the raw material it is composed of. The produced material generally comprises only one component.
Can anyone help?Try this query to start:
SELECT T1.DocNum, T1.CardCode, T1.CardName, T1.DocCur, T0.ItemCode, T0.Dscription, T0.Quantity, T0.Price
FROM dbo.pdn1 T0
INNER JOIN dbo.opdn T1 on T1.docentry = T0.docentry
WHERE T1.DocType = 'I' and T1.CANCELED <> 'Y' AND T0.ItemCode Like '[%0\]'
ORDER BY T1.DocNum Desc
Thanks,
Gordon -
Dear Frndz,
What is the T-code to view the system in-stock report.
Regards,
SriniHi,
In MMBE, enter material name, plant & storage location and click execute.
Double click on the storage location, you will get a complete list with the different categories in which the stock is available (unrestricted stock/ blocked stock/ sales order stock, etc...)
Regards,
Ashok -
hello,
we want to view the project stock report which would give sales order number and the WBS number.
In MBBS tcode the sales order number is shown but wbs no field is blank(if special stock is E)
and in other case wbs no shown but sales order no is absent.(if special stock is Q)
How to view both fields sales order and wbs no.
is there any method or alternative report.
thanks
shivProject Stock and Sales order stock are different. You cannt see WBS against sales oreder no.
Thanks,
Venkat
Edited by: VenkatSrinvas Konda on May 12, 2008 9:02 AM -
Closing stock report with GRPO
Hai all
Please help me to write this query,
For example
I have query to take closing stock report ,but my requirement is ,i want split up for Closing stock and closingvalue
like, if i have 40 closing stock means i want details how 40 is arrived
for example i run closing stock report as on 2009-03-31
means i want this format
Itemcode ClosingStock Closing value
ITM001 40 460
ITM002 20 210.......
ItemCode GRPOno. VendorCode quantity Rate GRPO Date
ITM001 10001 V0001 10 10 2009-02-01
ITM001 10002 V0002 20 11 2009-03-15
ITM001 10003 V0003 10 14 2009-03-31
ITM002 10021 V0011 10 10 2009-02-11
ITM002 10022 V0015 10 11 2009-03-14Hai Jeyakanthan A
I want small change in your query
SELECT T0.ItemCode,T0.TransType, SUM(T0.InQty)-SUM(T0.OutQty) AS 'Closing Stock',SUM(T0.OpenValue) as 'Balance' FROM OINM T0
*where docdate <= '[%0]'*
GROUP BY T0.ItemCode,T0.TransType
Having
T0.TransType = 20 ORDER BY T0.ItemCode,T0.TransType
I tried this query for taking closing stock for given date, its giving me correct result
SELECT T0.ItemCode, T0.Ref1, T0.CardCode, T0.InQty, T0.Price, T0.DocDate FROM OINM T0 WHERE T0.TransType = 20 AND
(T0.DocDate >= '[%0]' AND
T0.DocDate <= '[%1]') ORDER BY T0.ItemCode, T0.Ref1, T0.CardCode, T0.InQty, T0.Price, T0.DocDate
In this query i want only the GRPO no,date,price.... for closing stock quantity
Edited by: Prasanna s on May 14, 2009 12:39 PM -
Dear All
I am devlop new Stock Report Date wise
my output follows
Material Plant Storagelocaton Saleorder OPenning stock Closing Stock Total
Which Table stored that details?
how will calculated?
Thanks and Regards
Sureshhey
i think the following tables
will be helpful for the report:-
1>MARA
2>MBEWH
3>MSEG
4>VBRP
hope this will help
good luck
harry. -
How to create a report with different page sizes
Hi,
I would like to create a report with different page sizes, it's possible to do it with diadem?
When I change the layout parameters, changes afect to all sheets...
Is there a way to change page size individually for each sheet?
Thanks in advance.
MarcHi Marc,
You can use the DocStart and DocEnd commands along with the PicPrint command to spool multiple print commands to the same output PDF file using the direct printer approach. This should enable you to programmatically specify the page size differently for each sheet that you add to the print job.
' Print PDF Page by Page.VBS
OPTION EXPLICIT
Dim i, Path, OldPrintName
Path = AutoActPath & "2D Stacked"
Call DataDelAll
Call DataFileLoad(Path & ".TDM")
PDFFileName = Path & " Page by Page.pdf"
IF FileExist(PDFFileName) THEN Call FileDelete(PDFFileName)
OldPrintName = PrintName
PrintName = "winspool,DIAdem PDF Export,LPT1:" ' Set to PDF printer
PDFResolution = "72 DPI" ' "2400 DPI" , "default"
PDFOptimization = TRUE
PDFFontsEmbedded = FALSE
PDFJPGCompressed = "high"
PrintOrient = "landscape" ' orient paper
Call PrintMaxScale("GRAPH") ' auto-max, see alternative margin setting variables below
PrintLeftMarg = 0.181
PrintTopMarg = 0.181
PrintWidth = 10.67
'PrintHeigth = 7 (read-only)
Call WndShow("REPORT")
Call DocStart ' Begin multi-page document/print job
FOR i = 1 TO 4
Call PicLoad(Path & ".TDR")
Call GraphSheetNGet(1)
Call GraphSheetRename(GraphSheetName, "Page " & i)
Call PicUpdate
Call PicPrint("WinPrint") ' Add a page to be printed
NEXT ' i
Call DocEnd ' End multi-page document/print job
PrintName = OldPrintName
Call ExtProgram(PDFFileName)
Brad Turpin
DIAdem Product Support Engineer
National Instruments -
Stock Report for Variant configuration
Hi Experts,
Request your help to get the following information.
We have a material which are packed in to multiple packing modes. Inorder to ease the selection of packing mode in sales order, we are thinking of introducing variant configuration. I.e all the packed materials will be created as variants in SAP and the sales order will be created for the configurable material. When the proper characteristic is selected the material will be automatically replaced by the variant.
But the requirement is to see the stocks of all the varaints along with the configurable materials as the header. For eg. Material A is having variants A1, A2 & A3. The sales quantites are 25, 30 and 35 respectively.
In any of the standard report, can I see the sales of these along with the total sales of config mtl A as 90
Please guide.
Thanks & Regards
PrathibHi Prathib,
On my last project, we define material code with the same code at the beginning like you do A1 A2 A3 (for variants) and AC for example for configurable material. Then for stock report you can use MB52, in material field just write A* it will show you stock from material start with code A. But make sure you define material type and material group for selection wisely. It works for me. Now depends on how well you define your structure.
Regards,
Arman
Maybe you are looking for
-
RAC control file has correpted, unable to mount database
hi guru's, Im trying to startup my rac db, but it giving following error. SQL> startup ORACLE instance started. Total System Global Area 233861120 bytes Fixed Size 2212088 bytes Variable Size 176164616 bytes Database Buffers 50331648 bytes Redo Buffe
-
In need of some help with awesome
So I got it installed, and I started editing everything, but what I can't seem to figure out, is how to add items to the root-esque "awesome-menu". I see the lines of code in rc.lua but from there I'm lost to say the least lol. The documentation on t
-
Special Procurement and In-House Production on the same plant?
Hi All, There is a Plant A and Plant B. Plant A makes its own stock of material Z and sometimes gets it from Plant B as well through STO. For such cases where a plant gets stock from another stock, we have a special procurement type configured with t
-
Oracle.exe(oralce 10.1) on Window 2003 is using 100% CPU
Oracle.exe(oralce 10.1) on Window 2003 is using 100% CPU. while using importing. CPU IS PENTIUM 4 AND RAM IS 2G any tuning ideas ?
-
How do I do a scatter plot? Plus, blank chart isn't blank!
Something strange is going on with my Numbers app... But, before I get to that, I'm seeking confirmation on how to create a scatter plot. I have data arranged as such: Year Rate January 2009 7.8 February 2009 8.3 March 2009 8.7 April