Stock Report on Past date

Hi All,
Can a stock report for any Past date with respect to qty and value be developed which gives the split of unrestricted, Quality and Blocked stock.
MB5B gives stock report on any past date which is the total of all the stocks but not the split.
Need ur assistance.

Hi,
MB52 tcode gives the current stock status. In my case stock status of any past date with the split up is needed.
Regards

Similar Messages

  • AP Invoice Aging Report for past date

    hi guys,
    I am running R12.
    my requirement is to run AP invoice aging report for past dates (same like AP Trial Balance Report), but the seeded invoice aging report has no option to do so.
    would appreciate some help
    thanks in advance
    Ravi

    Hi Senthil,
    I am running R12.
    my requirement is to run AP invoice aging report for past dates (same like AP Trial Balance Report
    if u have any solution to this , please suggest me how to resolve this requierement.
    thanks in advance
    Ravi
    mail:[email protected]

  • Stock as on past dates

    Hi all,
    I have a requirement to audit stock differences that had happened few months back between SAP and BI.
    The stock in BI has a cumulative figure of all stock categories viz. unrestricted, in transit, blocked and QI.
    In SAP, I can get the unrestricted stock on a particular day using MB5B but I don't know how to find the blocked stock/QI stock/in-transit stock on a past date say as on 15/Jan/2009.
    Could you please help me out?
    Thanks
    Rana

    Hi,
    MB5OA doesn't serve my purpose. I need to find what was the stock break-up for all the stock categories (blocked, UR, QI, In-transit) for a material on a past date. For example, I need to know what was the stock of material ABC in QI, in Blocked and in unrestricted stock on 15th of Jan 2009.
    Could you please help me?
    Thanks,
    Rana.

  • Stock report on key date with customer information

    Hi Experts,
    Is there an available sap standard report that will show available stock in subcontractors or customers at specific date(posting date)?
    transaction MC.9 only show consignment stock without customer information we would like to know which customer inventoried this quantity
    Thank you for your inputs

    Hello,
    Thank you very much for your responses. I tried to check transaction MB51 but the customer is not displayed in the report. I found another report S_P00_07000140 that seems to fit the requirements. customer and posting date were also displayed in the generated report. However the SAP menu of this report is:
    SAP Menuu21D2Accountingu21D2Financial Accountingu21D2General Ledgeru21D2Reportingu21D2Tax Reportsu21D2Thailandu21D2Inventory and Raw Material for Special Stock Report
    Will there be no implications if this is used instead of MC.9 or MB51? what are the differences of the 3 transactions?
    Best regards.

  • Stock Report on Key date.

    Hi,
    I want to have a report which gives stock available on key dates. Is there any standard report available in sap.
    Thanks in advance
    VRH

    HI,
    Using T-code MB5B - Stock on Posting Date, the following input data to be given as follows.
    Company Code : ______
    Plant : _______
    Storage Location : ______ if required to be selected
    Selection Date : _________ to ___________ (Your key date from 01.10.2010 to 31.10.2010-report required period to be mentioned)
    Stock Type - selected Valuated Stock
    List of Scope click category and following options to be tick marked
    With Opening Stock Without Closing Stock
    With Opening Stock With Closing Stock, Changed
    With Opening Stock With Closing Stock, Unchanged
    Settings - Totals Only - Non Hierarchical Representation Layout /ZMB5B tick marked
    The above input data given & options are tick marked, Executed the report shown opening, Receipt,Issues,Closing stock, UOM, Opening value, Receipt Value, Issue Value, Closing Value, Currency in columnar (like Excel tabular format).
    Hope, it is useful for you.
    Regards,
    K.Rajendran

  • Stock qty on past date (yesterday)

    Hi,i would like to see the qty of the stock on previous day (or past date).is there any option in sap?

    YS,
    You can use T code MB5B for this purpose.
    Input has to be given like material, Plant (if required), storage location (if required) & date 'under selection date' on which you want to see the stock.
    Under 'Settings' mark 'Total only- Non hierarchical representation layout' & execute.
    You will data  of opening stock, receipt, issue & closing stock.
    Hope this helps you.
    SmanS

  • Consignment stock as on past date

    Hi friends,
    Is there a way to view the consignment stock per customer location as on a previous date?
    MB51 does not help and MB5B gives the total stock but not by customer (apart from its layout being hardly friendly). We need to reconcile stocks of same MATNR which lies in various ship to locations but can't when the customer provides us the statement from their end and we ourselves don't have ready numbers as on those dates. Appreciate any guidance.
    Many thanks.

    Yogesh,
    In MB58 Double click on customer and it gives u break up stock at customers place..
    Try to explore that....
    REWARD IF U FINDS THIS AS USEFUL....
    Regds
    MM

  • Stock report for a specific date.

    Hi Gurus,
    Can any one please tell me if there is any option is SAP by which i can get the stock status for a particular day. I mean if i want to check what was the stock report on last week some day, is there an option in SAP to do that. This report should give the stock of that day and any movements after that day should not be included in that report, for example if 10 quantity of a material was available on 26/03/09 and 5 were either moved or consumed, can i get the status in past for 26/03/09 today as quantity 10 rather than quantity 5 which is available today.
    Regards
    Anoop

    hi,
    Try with t.code MB5B -Stock on Posting date. You can get what you want.
    Regards,
    Prasath

  • Sales order stock and storage location stock on past date with value

    Hi everyone.
    I m looking for a report which can give sales order stock with value as it is shown in mb5b and storage location stock with value as in mc.5 is there any report which can give the combination of both the things on past date with values.

    can you tell me what shall be the fields and table for special stock on past date with value and sloc stock on past date with value

  • Opening and closing Stock report at Storage location level- date wise

    Dear all
    Is there any standard report to view opening and closing stock at storage location level? ( we have MB5B which resets the entry screen if we enter SLOC details).
    Thanks
    Sam

    Do  I have the option of  selecting Storage Location wise opening and closing stock on a particular date or period, that is what I have requested? Is it possible, evenafter selecting storageloc/batch stock and entering all the SLOCs in the selection creen, the report output does not contain any SLOC, and using ctrl+F8 or display variant does not have SLOC as a field also.
    pls gudie
    sam

  • Stock Report Date Wise

    Dear All
            I am devlop new Stock Report Date wise
    my output follows
    Material    Plant   Storagelocaton   Saleorder OPenning stock     Closing Stock     Total
    Which Table stored that details?
    how will calculated?
    Thanks and Regards
    Suresh

    hey
    i think the following tables
    will be helpful for the report:-
    1>MARA
    2>MBEWH
    3>MSEG
    4>VBRP
    hope this will help
    good luck
    harry.

  • Stock report for a period (based on posting date)

    Hi Experts,
    We have a requirement as under:
    1) We want a report for a period say from 01.04.2011 to 30.09.2011 (closed period for both MM and FI postings). Report is being taken on a later date say 01.12.2011.
    2) The report should say the status of stock as of 30.09.2011 only even of being taken in the month of December
    3) I tried to take the desired report through MB5B for the period 30.09.2011 to 30.09.2011 (selection date fields) on 20th december, 2011 and noticed that if same report with the same selection criteria is taken at two different times, output data is not the same whereas MM and FI posting periods are already closed.
    Can anybody suggest alternative SAP standard report where output will remain the same if report with same selection criteria is taken at different intervals ELSE in case of change we should be able to see the documents posted in between if back dated entries have been posted after opening MM /FI period.
    thanks

    sure it speaks the same, but it mentions as well the reasons (1) and has much more information (2)  and a solution.(3)
    1)
    user starts transaction MB5B for a very large number of materials or for all materials in a plant
    During the runtime of transaction MB5B, goods movements are posted in parallel:
               - The results of transaction MB5B are incorrect.
               - Each run of transaction MB5B returns different results for the same combination of "material + plant".
    Example: Transaction MB5B should process 100 materials with 10,000 MM documents each. The system takes approximately 1 second to read the material master data  and it takes approximately 1 hour to read the MM and FI documents. A goods movement for a material to be processed is posted approximately 10 minutes after you start transaction MB5B. The stock for this material before this posting has already been determined. The new MM document is also read, however. The stock read before the posting is used as the basis for calculating the stocks for the start and end date.
    Even for an old and closed period, MB5B starts today and calculates backwards  any movement to finally get the stock for  the time your specified in your selection.
    2)
    The SAP standard release does not include a solution
    so you have to understand that there is no real alternative transaction in SAP
    3) and then they provide a large section with a workaround that can be developed by an experienced programmer within 3 to 5 days.
    So how shall anyone here be able to tell you an alternative report?
    if someone does, then it is an owndeveloped z-report which is not available in your sap system.
    if you know that people want lookup period closing stocks at any time in future, then either schedule MB52 at month end and store the list somewhere (and do not allow backposting)
    or have an Abaper create a stock report based on the history tables MARDH, MCHBH, MBEWH etc.
    And even here you may encounter an issue at some day, if you start archving special stocks or material masters, because then the stock figures from the historic tables are gone and you cannot rebuilt a reliable stock report .

  • Stock report with the field... last stock changed at certain date?

    Is there any standard report with the date of the last change of the stock value and quantity?
    Points granted
    BR
    Saso

    Hi people,
    I want to know why MBEWH have not any material stock information for period when doesn´t exist any inventory movement for some materials, for example I have a case in 12.2006 period the material A have stock quantity 100 and value 1000 and the next period 01.2007  no stock movements were done for this reason the MBEWH had to had the same values stock 100 and value 1000 in 01.2007 period, but in MBEWH is missing, there is not any information for material A in this period.
    Anybody knows about this problem?
    Thanks.
    Lili.

  • No stock showing in Inventory on date stock report

    Hi
    I have created a Stock on date query at plant material level using standard cube 0IC_C03
    to get stock quantity on posting date i have restricted 0TOTALSTCK
    by 0CALDAY  variable .
    Correct me if any thing wrong to get on date stock.
    When i m executing that report for date 20.07.2009 , it shows 0 qty for a given Plant(1001) and a given material(ABC)
    where MB5B report in R/3 with same date show sum stock qty.
    again i executed the report with 17.07.2009 , on which the material(ABC) was lastly transacted for that given plant(1001)
    for this date i m able to match the qty with MB5B.
    Then i check sum other stock report which is at 0CALMONTH  level wen executed with 07.2009 shows correct qty.
    Now my question is y it is showing 0 qty wen the stock is there in it ? is query definition not proper to get stock on date ?
    Thanks and regards,
    Sonal....

    Hi,
    No need to restict.
    in rows, calday, plant,  materials
    in column 0TOTALSTCK.
    for 2 days data will look like this.
    19/07/2009 --  1001 -- 011235  ---   256 KG
    20/07/2009 --  1001 -- 011235   ---  280 KG
    stock as on 19  in MB5B, after recipts and issue is 256 KG.
    stock as on 20 th in MB5B, after recipts and issue is 280 KG.
    based on issues and recipts, data will be added to total stock.
    yes, stock will be last date posting date. as on today we can validate data till yesterday.
    one more thing for plant whose values are not matching, did to drill down stock type and stock category and check data.
    use RWBE t-code also for validation.
    Best Regards.

  • Please help to get onhand stock report with last purchase and billed date warehouse and item wise

    please help to get onhand stock report with last purchase and billed date warehouse and item wise

    Hi Rajeesh Ambadi...
    Try This
    SELECT distinct T0.ITEMCODE , t1.ItemName, T0.ONHAND as 'Total Qty',  
      T1.LASTPURDAT ,t1.LastPurPrc
    FROM OITW T0 INNER JOIN OITM T1 ON T0.ITEMCODE = T1.ITEMCODE
    INNER JOIN OITB T2 ON T1.ITMSGRPCOD=T2.ITMSGRPCOD left join ibt1 t3 on t3.itemcode = t0.itemcode and t3.whscode = t0.whscode
    WHERE
    T0.ONHAND>0
    AND T0.WhsCode ='[%0]'
    Hope Helpful
    Regards
    Kennedy

Maybe you are looking for