Stock Report ( With Special stock Indicator E)

Dear Experts ,
I have done the  initial uploading for the stock of finished goods via 561-E for sales order stock ( make to stock ) & 561 for make to order stock .
When i run MC.9 , the system outputs only make to stock materials .
& when i run MBBS the system outputs only make to order stock .
How can i see the entire stock ( make to order & make to order ) in a sinle reprt?

Dear Brother
Please use Transaction code MB52 and check in special stock indicate and run the report all data for special stock will be appear.
Regards

Similar Messages

  • ME2O report with special stock assignment (project stock)

    Dear Guru's
    Im tring to use ME2O report to monitor the stocks of subcontracting. In my business we have special stocks (project stocks).
    When I run the report it does not give the subcontracted stocks with project assignment.
    Am I doing something wrong or is there any otherway to achive this. I want to monitor the subcontractor stocks (with special stock assignment of project)
    Thanks in advance
    Rupesh

    can you explain this scenario a bit more
    subcontracting stock is stock type O, project stock is stock type Q
    I dont think one stock can have 2 stock types
    And ME2O is monitoring stock type O, not Q.

  • PGI using Stock with Special Stock Indicator "E". (STO)

    Hi,
    We are in the process of creating Stock Transfer.
    While doing PGI the System is displaying the following message:
    Only 0 EA of material 1103DGC22LB 08062009 available
    When we executed T Code MMBE, we found the Stock exits with Special Stock Indicator "E".
    Is it possible to do the PGI using Stock with Special Stock Indicator "E"?
    Or what would be best possible to handle this situation.
    Please guide.
    Regards,
    PK

    If the stock has special stock indicator E. then you can see this in MMBe as Sales Order stock. If you dispaly the details, then you can see the Sales Order number and item for which the stock is assigned. Unless there is some reason that you want to take this stock from the sales order (for example the sales order is to be rejected), then you shouldn't take this stock as you will be unable to fullfill the sales order. If you want ot borrow the stock, then you could do a transfer as advised by previous person from sales order stock to own stock and after you get replacement stock transfer some back to sales order stock, to fullfill the order. If you are using MTO then you could also create a new production order assigned to the sales order to make the stock in the special stock segment.
    Rgds
    Richard

  • Movement type 313 and 315 with Special stock indicator Q requirment

    Hi Gurus,
    We have the business requirement to use the Mvt 313 and 315 with special stock Q (two step stock transport for storage Location to storage location transfer). But when we are trying to use the t-code MB1B with MVt 313 with Q its not available. We know its because of SAP standard.
    Also we suggested to use the Mvt 411 Q but users wants the 313 /315 with Q from moving the project stock by storage location to storage location and received the update as below.
    We have looked into the option of transferring the project stock to plant stock.  Unfortunately, as well as being transaction-heavy and prone to manual errors, this has accounting implications.  So, we need to be able to action the two-step transfer on project stock via the enhancement described in the SAP documentation.
    http://help.sap.com/saphelp_rc10/helpdata/en/0f/03df3a89ec880ee10000000a114084/frameset.htm
    The link is specific to PM config . Could any one can suggest me how to handle this one to do with 313  and 315 with special stock type Project (Q) to transfer the stock by two step transfer.
    Thanks,
    Sada

    It seems you have to activate business function set LOG_EAM_ROTSUB (transaction SFW5). After that the customizing node will be available:
    SPRO > Plant Maintenance and Customer Service > Maintenance and Service Processing > Maintenance and Service Orders > Functions and Settings for Order Types > Goods Movements for Order > Movement Types for PM/CS Orders
    (transaction: DI_0MVTPM)
    http://help.sap.com/erp2005_ehp_04/helpdata/en/a0/00e93a2876a81ae10000000a11402f/frameset.htm
    Edited by: Csaba Szommer on Jan 10, 2012 11:39 AM

  • Goods mvt with special stock updated in consumption

    Hi,
    I understand that the goods mvt with special stock indicator such as Sales order stock and Project stock won't updae the total consumption in MD04 or Consumption in MMR, but can anyone kindly explain me the reason?
    Thanks.
    Nadali

    On the SD side, the special stock indicator on a delivery line item is copied from the sales order line item.
    And the special stock indicator on the sales order line item is determined from the item category.
    If you are referring to the MM side of things, (and based on your description of the use of the 'replenishment deliveries you might be), then there probably are corresponding configuration on the MM side of things.
    Matthew
    +1 (707) 276-6473

  • Please help to get onhand stock report with last purchase and billed date warehouse and item wise

    please help to get onhand stock report with last purchase and billed date warehouse and item wise

    Hi Rajeesh Ambadi...
    Try This
    SELECT distinct T0.ITEMCODE , t1.ItemName, T0.ONHAND as 'Total Qty',  
      T1.LASTPURDAT ,t1.LastPurPrc
    FROM OITW T0 INNER JOIN OITM T1 ON T0.ITEMCODE = T1.ITEMCODE
    INNER JOIN OITB T2 ON T1.ITMSGRPCOD=T2.ITMSGRPCOD left join ibt1 t3 on t3.itemcode = t0.itemcode and t3.whscode = t0.whscode
    WHERE
    T0.ONHAND>0
    AND T0.WhsCode ='[%0]'
    Hope Helpful
    Regards
    Kennedy

  • Sub:Stock report with sales unit of measurement - reg.,

    Hi guru's
    we have a requirement to have the stock report with sales unit of measure instead of base unit of measure can anybody guide me how to do this.
    thanks in advance
    tulja singh.

    From std. , I think your requirement can not satisfied.
    Make customized report.
    Take the help of ABAPER.

  • Stock Report with Batch Number

    Hi ,
    My Client requires stock report with Batch numbers .required report format is
    Item Code,BatchNumber,OpenQty,OpenVal,PurchaseQty,PurchaseVal,SalesQty,SalesVal,ClosQty,CloseVal
    I tried using query on wiki for stock report but that query is written in 2007 and Batch tables and OINM table is changes in 8.81.
    http://wiki.sdn.sap.com/wiki/display/B1/SAPB1SQLH-INItemInventoryOpeningandClosingStockper+warehouse
    can any one help with stock report- batches.
    Thanks,
    Preeti

    HI,
    use below query as basis and mofiy the fields required. it shows linking in batch and transaction tables:
    SELECT distinct T0.ItemCode,T0.ItemName ,T0.DocDate ,T0.DocType ,T0.DocNum,T0.LocCode ,t4.DistNumber as [BatchNumber], T1.Quantity ,T5.CalcPrice as [Price]  
    FROM  [OITL] T0 
              INNER  JOIN [ITL1] T1  ON  T1.[LogEntry] = T0.[LogEntry] 
              INNER JOIN  OBTN T4 on T1.MdAbsEntry=T4.AbsEntry
              INNER  JOIN [OITM] T2  ON  T2.[ItemCode] = T0.[ItemCode]   
              Inner JOin OINM T5 on T0.ItemCode =T5.ItemCode and T0.LocCode = T5.Warehouse  and T0.AppDocNum = T5.BASE_REF
    Thanks,
    Neetu

  • Restrict MIGO_GI at movement with Special Stock

    Hi,
    We need restriction in T-code: - MIGO_GI or MB1A.
    In MIGO_GI there restrict GI for cost center with Special Stock
    And MB1A there also show Special Stock.
    Do you any possibility to restrict movement with Special Stock.
    Amit

    not exactly. no.
    you can restrict the posting of special stock by granting/denying authorisations for movement types but no more. binding the movement type to an obligatory field 'cost center' is not a matter of authorisations, but of configuration - check transaction OMJN/OMJX et all on the how-to. that still would leave open that everybody can choose a random cost-center deliberately, so you have to use an additional enhancement/exit there ...

  • Movement type 313 and 315 with special stock K.

    Hi,
    I would like to post a movement type 313 and 315 with special stock k (consignment) but it is not possible. Also i have tried to create a new movement type (OMJJ) coping 313 and trying to set stock special k in somewhere but I couldn't.
    it is possible a movement type 313 K or 315 K?
    Thanks in advance.
    Anna

    Hi Anna Barnils ,
    Not possible.
    Read the below help:
    SproMMInventory Management and Physical InventoryMovement TypesClick on the help infront of Copy, Change Movement Types and check movement types 313 / 315
    Regards
    Ramesh Ch

  • Stock-taking and special stock

    Hi,gurus I'm meeting a problem about the continuous count process...
    All my finished-goods are make-to-order, so all the F/G stocks have a special stock indicator 'E'. During the continuous count process I have to give each F/G item a corresponding sales order # and a line # except for a actual quantity...it's really difficult because the stock is quite huge...
    Is there any method to count the quantity(F/G stock) only, instead of associated with any sales order during continuous count process?
    Thanks a lot....

    Oops...the real practice may be as follows...
    A custom placed 10 orders for one product, then there're 10 or more corresponding production orders to fulfil the requirement. After produced, all the boxes might be stacked in one bin, during delivery for one order, we could pick up any box without considering if this box belonged to an another order if no batch-management, right?
    So count and delivery have some differences...:-)
    Thanks any way...

  • How to credit customer with special gl indicator

    Dear all,
    I want to credit customer with special GL indicator H for security deposits from customer. i am using T-code F-02 and using key 19 to credit it but it dose not allow me to credit the customer with special gl indicator.
    plz help me?
    Regards
    Ahmed
    Moderator: Please, avoid asking basic questions

    Hi,
    In down payment how you will debit the salaries.
    Only vendor is debited with special gl and Bank is credited.
    so are you making the advance payment with the request or directly making the down payment in f-48.
    is 7 special GL indicator that you defined, as Standard is A.
    Never change the standard transaction types of down payment.
    Standard SAP will not allow to Park the payments.
    Regards,
    Padma
    Edited by: Padma J on Jul 17, 2009 1:23 PM
    Edited by: Padma J on Jul 17, 2009 1:26 PM

  • BAPI for posting account with special GL indicator

    Hi all,
    is there any other BAPI except than BAPI_ACC_DOCUMENT_POST that can be used to post unt with special GL indicator

    use program RFBIBL00, by setting the TCODE 'FB01' in the structure BBKPF, but if the transaction FB01 does not support the special G/L indicator you require, it may not be possible. I would still give it a shot.
    read the documentation of the program. Additionally, it can be used in conjunction with LSMW for easy setup.
    Re: program to upload vendor/customer items with special GL indicator?

  • Specific report with special template

    Hello Friends I have designed 4 templates 1 FOR BMW - Auto, 1 for bmw - HR
    etc.
    Question # 1 : I now want to make the portal display 4 tabs Auto, HR, FMA, FECS
    by making a copy of 0analysis_pattern
    So if user execute the report selecting HR Tab it execute the report with that template.
    Please help me how can i set up this do I need a master template that links all 4 or I can do this by some portal setting we are on BI 7.0 2004S SP14
    Question#2 Also I have a requirement of making custom template for dasboards where i want to use that template for specific report. please suggest with steps on how can I execute only specific report with special template that mean my special template will overwrite the settings 4 tabs Auto, HR, FMA, FECS and that report will be executed with special template only,.
    Thanks
    Soniya

    1. Create one more template in WAD by copiing 0ANALYSIS_PATTREN. we have an TABs Web Item. You need to use this web Item in your WAD Template. You need to do this using Commands. When ever you click on any Tab, it should call specific Bex Query (Not Web Template you Created).
    1. Create one temple which copy of 0ANALYSIS _PATTREN.
    2. drag TABS web Item .
    3. define the Sequence of reports in TABs Web Item Properties.
    4. Set the Properties of the ANALYSIS Web Item upon execution of every Tab. you need to set these parameters using Commnds.
    2. Create a brand new template by coping 0ANALYSIS_PATTREN. make necessary changes to new template use this template for where you want. this template will be different from earlier 4 Tabs one.
    Hope this helps.
    Nagesh Ganisetti.

  • Consingment stock report with values and periods..

    hello guys,
    i have an issue here.. consignmet stock are "managed" within SD. Is there a standard report which cointains info about consigment stock, its amounts (values) and periods ?
    Main point here - consingment stock is processed within SD, so for example t.code MB54 is not useful here .
    Thanks guys !
    Best regards,
    Laimonas

    Hi......MB54 wont help since that shows the Vendor consignment stocks.
    Use MB52 creatively like this.
    Goto MB52
    Put your plant name.
    In the section 'Selection : Special stock', Mark the check box and put 'W' in Special Stock indicator.
    Choose the other settings as per your choice.
    Execute.
    Now you will see a whole lot of stocks along wioth the Consignment stocks. If you only want to see the consignment stocks, do like this
    In the list, put you cursor on the column 'S' which is special stock (i think the 4th colm in the list). Now choose the filter icon and put the filter criteria a 'W' i.e. customer consignment stock.
    You can save this is a variant with a name, say /ZCONS.
    Now come back to the initial MB52 screen. In the bottom section for display options, put this variant name in the field Layout.
    So now when you next run the report with this variant, you will only get the customer consignment stocks with their values.
    Hope this helps.

Maybe you are looking for