Stock Reversal - From Unrestricted to Quality
Hi All,
Our scenario is as follows,
Inspection takes place for a Inward material (101). Once the UD is given stock is moved from Quality Inspection to Un restricted.
Then the Raw Material is issued to Production. Some defects are observed at production Stage and they are returning it to Quality. How this can be done in SAP. I have tried to Transfer Posting (321 to 323), System says, as the Material is activated for QM Inspection, this is not possible.
Pease guide me, how to move the Material back from Unrestricted to Quality Inspection.
Regards
Sam
Hello,
You can choose a line rejection process for this. Please activate 08 inspection type for the material.
First pls do 344 movement type (MB1B) and post the material from unrestricted to block.
Then do 349 movement type for posting the material to quality from Block.
Lot will get created and you can reject the material by giving the UD and posting it to return delivery.
Please make sure that quality is active for 349 movement type in SPRO > Inspection for good movement.
Please revert back for any more doubts.
Regards
gajesh
Similar Messages
-
Movement of material from Unrestricted to Quality at sub contractor
Hi Expert,
I am looking for a way to move stock from Unrestricted to Quality for stock that is stored at a vendor (sub contractor)?
Have you got any advice?Hi Anders,
Is your wish to move your goods from unrestricted special stock at SC vendor to QI special stock at SC vendor?
In this case you may have solution, please check transaction MB1B + relevant movement type (sorrowfully I cannot check 'cause I have no access to SAP now). Please take care of choosing proper movement type with special stock category 'O'.
http://help.sap.com/saphelp_46c/helpdata/en/4d/2b909643ad11d189410000e829fbbd/frameset.htm
BR
Csaba -
Posting change from Unrestricted to Quality inspection
Hi Experts,
Help please.
I am trying to do posting chnage using MB1B transaction (322 Mvt type). But I'am having an error : "Change the inspection stock of material XXXX in QM only".
I do not know what this error means, Please someone help me.
Initially, the material was received in "Quality inspection", but it was already been moved to Unrestricted. But now, we are having problem in doing posting change from Unrestricted to Quality inspection.as the collegues already said. when QM is active you cannot do manual QM transfer postings.
But you can do a MIGO with 102, to cancel the receipt. (you have to change the proposed quality status in item detail from Quality to unrestricted before you can do this)
Then you can receive it again the standard way. It will again go to Qualtity inspection and create an inspection lot . -
Posting from unrestricted to quality
Dear Gurus,
For some reasons, I need to post batches from unrestricted to quality inspection, keep in mind that QM is active. How can I make this?
Regards,
MaXI Presume here Baches means Batches & not the Inspection lot. If yes then you can go to QA32 & put the Batch into restricted.This can be done through MSC2n also.
This can generate 341 mvt in the background.
If Only inspection lot then you can follow the root of 08 inspection type with MB1B.... -
Transfer posting from Unrestricted to Quality using QM
Hi Team,
Im not expert in QM, I need your help.
Here is using the module QM for quality inspection, I have the following situation:
A GR 101 was done into a PO.
Quality release the material and stock moved from Quality to Unrestricted
The detect that the Qty of pieces are not correct and now they want to reverse the GR, they tried but was not possible. Error:; Deficit of SL Stck.in qual.insp 972 PCE : 004933000301 7601 9001
So What step I need to follow in order to move the inventory from unresticted to Quality.
I already try with Mov 322 but get this message: Change the inspection stock of material xxx in QM onlyIf you have QM then you cannot post stock with MM movement into Q-status.
But you can reverse the GR in MIGO, but not with cancel in reference to material document. You have to do a Goods receipt to purchase order but using then movement type 102 for cancellation. Then in the detail tab you can change the quality status from the proposed quality status to unrstricted status. -
QM - WM : How to change stock from Unrestricted to Quality
Hello,
I am working for the first time on a Project with both WM and QM and facing an issue : for a certain material, there was some stock in Quality - I released it using a Posting change via LQ02 Transaction and movement 321 (worked fine in WM and IM)
I am now able to create the QM view to activate QM in case of customer returns...
I now would like to put back this stock to Quality : I am using again LQ02 with movement 322 as IM and WM Movements have been linked in customizing...It doesn't work as I receive the message : *u201CChange the inspection stock of material *** in QM onlyu201D.*
Can any one explain me how to proceed to put back this stock to Quality as I only removed it to create the missing QM view and activate the inspection type.
I have no clue about QM but I checked in Customizing and it seems movemnet 322 is not relevant for QM so I don't understand this error message....
Thanks,
KAKthe following thread may help u:
INSPECTION LOT
regards,
indranil -
Transfer from unrestricted to quality
Dear Gurus,
I have a scenario that sometimse I need to transfer a certain quantity in the unrestricted stock to quality inspection stock and perform inspection to it.
I tried to transfer the quantity from transaction MIGO, but it didn't allow as quality is active on the material.
Keep in mind that this is not the case of recurring inspection, it is random.
How can I handle this issue?
Regards,
MaXHi
I will try to answer your question based on the little information provided by you.
As you have posted the stock already to the Unrestricted you can reverse the stock to quality using OSS note 175842.
Again if you do not want to reverse the inspection stock posting and ur business scenario allows you to create new inspection lot then you can use stock transfer inspection. Transfer posting ( Storage location to storage location) but create a Z movement type so that it will not effect your daily storage location transfers. Activate material for 08 Stock transfer inspection or new variant of 08, in QM view.
Post the material using MIGO
Regards,
Nitin -
Stock transfer from Unrestricted Stock to Sales Order Stock
Hi,
We have one sceanrio where we are transferring Unrestricted Stock to Sales Order Stcok through TC: MB1B and movement type - 413.
In this the material consumption account of the material hit is assigned in GBB/VBR. Also I have made this GL as cost element.
But during this Stock transfer the system is asking for CO- Object. I dont wantt to have any CO-Object here.
How can we resolve this.
Or is there any other Transaction event key in OBYC that needs to be maintained.
Please help.
Regards
Kamihi
try with 413 E movement type -
Automatically Transfer from unrestricted to quality after oneyear
Hi expert
i have requirement that after every one year from the GRN i want the materiel goes to quality check automatically. now i am doing manually by Movement type 322.
regard
nabilQA07 can do this job. Precondition is either a shelf life date or a recurring inspection method in material master
-
Date option in stock reversing program(SAP NOTE 175842)
Hi Gurus,
We have prepared a program with SAP NOTE 175842 for reversing stock posting.My client has done GR in march 09 and quality peoples have posted to unrestricted stock in same month.Now because of some reason stores person want to cancel GR. So we have reversed the posting for the lot in April using the programme.Now when stores person try to cancel GR in month of march system is giving error "Deficit of SL St.in QI prev. 14.800 MT ".Because we have reversed the posting from unrestricted to quality in april and we are trying to cancel GR in March system is giving above error.
Is there any settings such that in stock reversing program we can enter the date, so that on a particular date we can reverse the stock.Because in current situation we can enter lot no. only or is there any other solution to overcome this situation
Regards
Amithi amit
Yes system will not allow you to cancel GR for March when Reversal stock posting was done in April.
Because it will consider the status of stock when GR was made.
Which movement type you have used for reversal From Unrestricted to Quality.
Was it the activation of 08 & then 322.
If it is so then cancellation of GR will not take place through original GR document(as it is in unrestricted), It will give error msg if you give reference of same.
Even GR can not be cancelled based on 08 inspection lot as 08 is not wrt PO.
Just asuggetion explore User Exit
QEVA0008 Usage decision: Customer function key (e.g. to cancel UD)
Sujit -
Transfer Posting Unrestricted to Quality Stock
Hello friends,
I need to move the stock from Unrestricted to Quality Stock. I dont want to use Movt. 322 as it is reversal of 321. Is there any other way out?
Regards,
NavinHi Navin
322 mvt is the better option. 322 is not only reversal of 321. also this will be used in many occassions to bring stock from Un restricted to Quality Inspection. for example in recurring inspection (09 inspection type), material will move from Unrestricted to Quality Inspection with 322 mvt type only.
Can you please explain why you dont want to use this mvt type tp bring stock to Quality Inspection?
regards
Srinivas -
Movement type from unrestricted to reserved
Hi Friends,
Is there a T-code for stock transferring from unrestricted to reserved?
Here is the scenario, we have 100 pieces of material ABC under unrestricted , we'd like to reserve 50 pieces for a particular customer who will place the order two months later.
Thanks for your help
Lindait is not possible to create a reservation in MB21 transaction for movement 601.
So you need to find a workaround to "reserve" the material.
one idea could be to create the sales order in advance with a certain delivery data (e.g. Dec.31) and use and change this one when the real order comes in.
Another option could be to change the status to blocked, or move the stock into an extra storage bin.
any workaround has follow on actions, as you would need to transfer the status again to unrestrcted if you want make use of this material.
In any case, such reservations may lead to dead-stock if the expected sales order does not arrive. -
Problem in BAPI for stock posting from quality inspection to unrestricted usage
Hi all,
I am using BAPI_GOODSMVT_CREATE for stock posting from quality inspection to unrestricted usage Stock against quality inspection lot(not by MB1B) using mvt type 321.The material doc gets created by the BAPI,but actual stock posting is not taking place ie.the stock doesn’t get reflected in QA33/32 and QA11 also .Can any one suggest what must be wrong?The inputs given are as follows:
GOODSMVT_HEADER:
PSTNG_DATE =30/07/2014, DOC_DATE = 30/07/2014, REF_DOC_NO = INSP LOT NO.
GOODSMVT_CODE:
GM_CODE: ‘04’ .
GOODSMVT_ITEM:
MATERIAL = MATERIAL NO
PLANT = PLANTCODE
STGE_LOC = ‘WIP’
BATCH = BATCHNO
MOVE_TYPE = ‘321’
ENTRY_QNT = 100
ENTRY_UOM = ‘EA’
ORDERID = Prd ord no.
After executing this I used BAPI_TRANSACTION_COMMIT also. I am able to see the posted qty in MMBE,but it is not reflecting in QA11/33/32.
Kindly help me.Hi Naveen,
Thanks for the reply. Even after using FM QAVE_PROCESS_AUTO_UD,when i execute
BAPI_GOODSMVT_CREATE, the same thing is happening.I am unable to see the stock deducted in QA33.
Is there any input in the goods mvt bapi where we can provide inspection lot no since i believe that the goods mvt has to get connected with the inspection lot. -
IDOC - message type WMMBXY(Stock transfer from quality to unrestricted)
Hi Gurus,
I have IDOC problem.
Inbound message type WMMBXY(Stock transfer from quality to unrestricted), The status if I check in WM02 of Doc is "51-Application document not posted"
Error Message ""Required function
MB_CREATE_GOODS_MOVEMENT is not being processed".
Please Help.
PrashantHi
The Idoc whcile Posting using Message type WMMBXY calls the Function module L_IDOC_INPUT_WMMBXY & in turn this calls the function module MB_CREATE_GOODS_MOVEMENT.
This function is not getting executed.
Please check if the Movemnt type used is not active for WM movemnts.
If you have used previously this movemnt type & now it is not working. Please take hlep of ABAPer for debugging & finding the Root cause
Thanks & Regards
Kishore -
Process to Move Stock from Unrestricted to Restricted / Quality Stock
Dear All,
In one of my plant Quality Management Module is not implemented, but MM module is live and manually using Mov. Type: 321 stock is transferred from Quality to Unrestricted and vice-verse.
My requirement are as follows:
1) How can stock status be changed automatically from Unrestricted to Restricted / Quality once its re validity period reaches.
(For this Inspection Interval of 365 days has been maintained in QM view.)
2) Inspection Lot is not required.
3) How can QA07 & QA05 can help in this ?
Best wishes,
Vivek KumarHi,
1) I am passing Material code, Plant, taking 'Initial run in days=1' and selecting 'Block Batch at Inspection Date', I am getting msg 'No Entries Found' (In this case Inspection Type '09' was not active)
2) When I activate Insp. Type '09' the Inspection Lot is getting generated when i perform the above process but I dont required Insp. Lot.
Suggestion welcome.
Rgds,
Vivek
Maybe you are looking for
-
The latest version of Mavericks does not allow a Pages document to become a 'stationery pad'! Is there a way to do this this other than through the 'Get Info' window? As Pages templates cannot be ordered in folders, my many templates are effectivel
-
I can't hear sound after upgrading to lion
I have this little annoying problem with my iMac after upgrading to Lion OSX. After waking up my iMac I can't hear any sound from internal speakers, ie: only video on Youtube, but no sound, but whilst pressing volume up/down button I can hear beep. W
-
How to get data in ABAP program from multicube in external BW system
Hi friends, I want to get data from one multicube which resides in an external BW system, in my ABAP program internal table. Is there any SAP standard RFC / BAPI for this or is there any other way around or I have to design my own program to get
-
Subtitle import Problem, HELP!
Thanks in advance for the help. Here is the problem. I am finishing a DVD project today complete with 6 different subtitle languages. I have been importing files for weeks with no problem. But today, for whatever reason, when I import a .son file, tw
-
I tried to replicate data sources in BW for the R/3 source system. But, still no data sources shows up under the source system. RFC detaination works on both BW and R/3 system. What way should I troubleshoot this issue?