Stock Status of meterial  is set as 'blocked stock' and 'unrestricted"

Any Standard Report Stock Status of meterial  is set as 'blocked stock' and 'unrestricted"?

Hi,
You can check the stock status using transaction mmbe......
Regards,
Noopur

Similar Messages

  • How to access a domain server which is targeted by Group Policy set to block Inbound and Outbound connections

    Hi,
    I have a practice lab with two physical servers 2012 R2, one of them is Hyper-V host and one of VMs is a domain controller. I was doeing some exercises with firewall rule deployment through Group Policy, so I created an outbound rule to block port 80 which
    was targeted to Domain Computers. Now my other physical server has inbound and outbound connections set to block and domain controller cannot be contacted to update policy ( with rule removed ). At least that is my understanding. Maybe I messed up something
    with the profiles too, because port 80 would not have block all outband traffic, or?
    I am new to IT so my understanding is still poor.
    Best
    Robert

    Hi Robert,
    If we block inbound connections, all connections that do not have firewall rules that explicitly allow the connection will be blocked.
    If we block outbound connections, all connections that do not have firewall rules that explicitly allow the connection will be blocked.
    If we block outbound TCP port 80, it will mean all websites will be unreachable, for TCP port 80 is for HTTP.
    Regarding Windows firewall security settings, the following article can be referred to for more information.
    Windows Firewall with Advanced Security Properties Page
    http://technet.microsoft.com/en-us/library/cc753002.aspx
    Best regards,
    Frank Shen

  • Blocked Stock in APO

    Hi Friends,
    In ECC for MRP "Blocked Stock" is excluded but for APO the "Blocked Stock" is also planned in APO.
    So please let me know how these Quality Statuses’ would be transferred into APO and what is needed for APO to consider a Blocked Stock from ECC as Blocked in APO well?
    Your response will help me to resolve this issue.
    Regards,
    Nabin

    Thanks Srinivas...it's resolved my issue.
    Regards,
    Nabin

  • Error while cancelling GR material is at Block stock

    Hi,
      I have created a GR for material QM view is maintain , after GR material updated from QM it is rejected,  then we have transfer it in Blocked stock in QA11  now we want to cancel the GR,  but while GR  cancel with MBST or MIGO  the stock type it is shoing as X  i.e quality stock  now in quality stock is 0  because material is at blocked stock.  so while cancelling it is giving error as  Deficit of SL Stck.in qual.insp 5,000 NO : 928 MS10 S101
      how to solve this,
      regards,
       zafar

    Hi
    you have to move the stock first quality only.  once you got the stock in quality you can send the material to vendor with (122) movement type.
    For your reference:
    1. SAP NOTE 175842 needs to be implemeted first.
    2. User Exit QEVA0008 needs to be activated.
    3. Then First of all reverse the UD by transaction QA12, by clicking the Customer Function Tab.
    4. Now the stock can be reversed for the same Lot by running program RQEVAC50 in SE38.
    above procedure you have to do must if amterial belongs to quality.
    laxman

  • Inspection Lot Stock: Post to GR blocked stock

    Hi Experts,
    During the IQC process (inspection type 01), first I use the 103 to post the stock to GR Block stock (100 pcs), then after the Usage Decision, I post the stock 80 to  unrestricted use stock, 20 remain in the GR blocked stock.
    So, the 20 stay in the GR Blocked stock, and what can I deal with them? Manually create a inspection lot?

    >
    kiran kumar wrote:
    > > Dear GR blocked stock is not plant's own stock.It's a non valuated stock and there are no accounting data for GR blocked stock and it is not possible to post GR blocked stock to QI.
    >
    > Release the GR blocked stock with 105 mvt type.
    >
    > Cheers
    > KK
    Dear KK,
    The GR Blocked stock could be released to unrestricted stock by the 105 type while doing the usage decision.
    However, in this occassion, this 20 is remained in the GR blocked stock by using the "GR blocked stock" field in the Inspection Lot Stock tab of the QA14.
    Edited by: Veryhanhan on Dec 18, 2010 9:15 AM

  • How to move unrestricted to GR blocked stock

    Is there any way to move the material from unrestricted to GR blocked stock ?
    Regards
    Suresh

    pls follow:
    105   Release GR blocked stock for warehouse
    106   Release GR blocked stock for warehouse - reversal
    344   Transfer posting blocked stock to unr.-use stock - reversal
    regrads,
    indranil

  • Return consignment stock to blocked stock

    Hi All,
         I want to be able to return consignment stock through sd (pick up)directly to blocked stock .
    Movement type 632 is now used to transfer consignment stock to own unrestricted.
    What can i do ? is it possible  to put material in block stock with movement type 632
    In MM02, I enter the material code for which I am  creating consignment pick up and selected "Quality Management" view. & assign inspection type  06- Inspection for Returns from Customer
    & marked post to insp  stock.

    Hi
    Option 1
    For your consignment pick up schedule line category F0 or F1 the standard movement type is 632
    only
    You are not adviced to tamper the standard settings
    With  632 movement type stocks will be in  own unrestricted
    You can move them to QI inspection in t code MB1B with movement type 322 which should be he correct process
    Option 2
    But if the business demands then in your schedule line category F0 or F1 change the movement type to either 
    655---goes to QI inspection straight away (you can move them back to unrestricted  t code MB1B with movement type 321)
    or
    657----blocked stocks (you can move them back to unrestricted  t code MB1B with movement type 343)
    But avoid option 2
    Regards
    Raja

  • Goods receipt in blocked stock

    Hi,
    I have 3 production order types.
    For one of the order types, whenever a goods receipt is done the stock has to be posted in the BLOCKED stock directly.
    What are the settings that need to be done to achieve this?
    Regards,
    Narendra Bora

    Hi,
    A suggestion:
    Use user-exit PPCO0006 in this exit the structure AFPOD_IMP field INSMK can be used to default the value which you want for the order type. Work with your abaper on this & it should be possible.
    Regards,
    Vivek

  • GR-blocked stock VS Blocked stock

    Dear all,
    I still have some confuse with the concept and use of GR-blocked stock and blocked stock.
    As far as I know, GR-blocked stock is usually triggered at the point of goods receipt with ref to PO. If the goods are not satisfy with the requirement, then post the goods to GR-blocked stock via 103.
    However, under what circumstances we need to post the goods to blocked stock?
    Thanks in advance for the guidance.
    Thanks.
    Best Regards,
    Edwin

    Hi,
    Good receipts is done in Unrestricted stock (or) Qualtiy Stock (or) BLOCKED stock
    Movement type - 101 Unrestricted stock (or) Quality Stock
    what circumstances we need to post the goods to blocked stock?
    during inwarding if you found that the lot will having problem where the value is more and qty is more
    you will inward in Blocked stock
    Movement type -- 103 - For blocked stock in this you are moving to block stock if  you see the P.O history of the p.o. there will be qty updation and value updation is not there
    when u move from block stock to unrestricted stock using movement type 105
    stock will be getting updated and valu also
    You have totally confused
    G.Ganesh Kumar

  • GR blocked stock report(other than MMBE)

    Hi friends,
    do we have any transaction code to check the stock of GR blocked stock?
    i need other than MMBE -this can be used for sinlge material.. i need Gr blocked stock list of all the material of perticular plant.
    in MB52, it is giving blocked stock qty but i need GR blocked stock
    Edited by: Suresh Shenoy on Jun 10, 2008 11:23 AM
    Edited by: Suresh Shenoy on Jun 10, 2008 11:23 AM

    There is no table that hold the GR blocked stock. This blocked stock in MMBE is dynamically calculated.
    from OSS note: 23687;
    The stock overview (transaction MMBE) displays the GR blocked stock. This stock is calculated from the total of all goods receipts for purchase orders into GR blocked stock of this material (movement types 103 and 106) for which the transfer into the own stock or the return delivery to the vendor (movement types 105 and 104) was not yet entered. In this case, only those order items are considered whose goods receipt to the stock is to be posted to the material master.
    Because of this design, reading POs and PO history, it is not available in MB52 as it would create real performance issues.
    Thats why I pointed you directly to the purchasing reports.
    The stock would not be differ from what you get with the WE104 selection.
    An ABAPer can certainly copy the MB52 program and include the calculation logic that is used in MMBE.

  • "Blocked stock" vs "GR Blocked stock".

    hi,
    please give some detailed info about "Blocked stock" vs "GR Blocked stock".
    rgrds
    Piyush

    hi,
    GR to the GR Blocked stock:
    1.     The material document is generated.
    2.     As the GR blocked stock is non-valuated stock, the no accounting document is generated.
    3.     The PO history gets updated and the open PO quantity is not reduced as a result.
    Can display GR blocked stock at:
    1.     Stock overview(At plant level)
    2.     PO history
    BLOCKED STOCK: Neither available for MRP nor for consumption...
    Hope it helps..
    Regards
    Priyanka.P

  • 'blocked stock" & "GR blocked stock"

    what is the difference between "blocked stock" & "GR blocked stock"? Explain in detail.

    hi,
    GR BLOCKED STOCK:
    1.     The material document is generated.
    2.     As the GR blocked stock is non-valuated stock, the no accounting document is generated.
    3.     The PO history gets updated and the open PO quantity is not reduced as a result.
    Can display GR blocked stock at:
    1.     Stock overview(At plant level)
    2.     PO history
    BLOCKED STOCK: Its not available for MRP and Consumption..cancheck it in MMBE...
    Hope it helps..
    Regards
    Priyanka.P
    I REQ,. YOU TO GO ON CLOSING THREADS IF IT GETS ANSWERED...
    Edited by: Priyanka Paltanwale on Dec 15, 2008 1:07 PM

  • Difference GR blocked and blocked stock

    Hi Experts
    can u please tell me the difference between gr blocked stock and blocked stock.

    hi
    >block stock
    the block stock means the stock is in ur inventory and block for some special reason like reservation or any other reson
    >gr block stock
    gr block stock is the stock came and blocked for QM inspection before doing actual GR
    means the stock will be in our premises but not of our liability
    When we have some issues in the received stock and we do not want the quantity to be considered in the inventory the we can maintain the stock as GR Blocked stock.
    It is only recorded in the purchase order history. This stock is NOT valuated.You can display goods receipt blocked stock from two viewpoints:
    1.Goods receipt blocked stock for a material (at plant
    level)
    2.Goods receipt blocked stock for a purchase order item
    hope it clears
    regards
    KI

  • Gr Blocked Stok or blocked stock Stop type setting in OMJJ

    Hi,
    Movt. Type 103, used to post material in GR blocked stock, just want to know what setting in OMJJ for movement 103 used to POST Material stock into GR Blocked Stock only.
    Edited by: V raj on Aug 27, 2009 3:08 PM

    Hi Raj,
    After u enter the movement type 103 in OMJJ , in the first screen u will find Internal Control -- GR Blocked Status (S).
    Regards
    Ramesh Ch

  • Stock transfer between plant to plant in blocked status

    Hi Gurus,
    Can anybody know how to use some mov. type to transfer restricted status between plant to plant?
    Many thanks in advanced.
    Luiz Geraldi

    Luiz,
    You cannot move 'blocked' or 'restricted' stock in this manner. This is not supported in ECC 5.0 and I would not think ECC 6.0 would be any different in this regard as this is a basic rule within standard SAP although I would think that in certain situations it would be beneficial to be able manage this in a simple move. 
    - As others have correctly pointed out, you have to change the stock status to 'unrestricted use', transfer/receive it (either using mvt 301, 303/305, 351/101, 641/101, 643/101 etc depending on the stock transfer mechanism used between the plants) and then finally change the stock status back to 'blocked'.
    - Another option would to be to post an inventory adjustment using mvts 701/702 in both the plants and then change stock status in receiving plant to 'blocked'.
    - Design a custom ABAP program to perform the sequence of movements in a single transaction. I think it would be important to get the timing right to avoid incorrect booking of stock.
    - The movements could be also be linked in a single transaction using a workflow solution although I am not sure how simple or complex the solution might be.
    Unfortunately, the quantity strings associated with movement types are hard-coded by SAP. So, it would not be possible to achieve this move using a custom movement type without any modifications.
    Hope this helps.
    H Narayan

Maybe you are looking for

  • Exception in CL_GUI_FRONTEND_SERVICES= FILE_COPY

    Hi, I am trying to use FILE_COPY method and getting an exception 'CNTL_ERROR'. I am also using another method as FILE_EXIST and getting same exception. But in this method 'GET_WINDOWS_DIRECTORY' I don't get any error and I am getting the windows dire

  • Premiere on Windows wont open Project from Mac

    It says "could'nt open Project because it was created with a newer Version of Premiere" although I have Adobe Premiere Pro CC (2014) on both, my Mac and my PC. The project is saved on a hard drive formatted in HFS+ but I have a driver installed on my

  • How to update file name of SharePoint form library?

    HI All, I have a Infopath form library and submitted as "Form-1". Once update and submit, the same form name should change as "Form-1.1" with out duplicating. How to achieve this, thanks in advance!

  • Problems with Whitespace using nested tables from eclipse dtp oracle plugin

    Hi, sending from eclipse to oracle xe fails if whitespace is used: Example1: Nested table in nested table adress_table_typ has another nested table in it that works CREATE TABLE x ( i INTEGER PRIMARY KEY, adressen adress_table_typ ) NESTED TABLE adre

  • Can't open mail after installing yosemite

    Hi, I just istalled the yosemite on my mac, and now I can't open the mail. Have tried sever times. Everythings seems good in the beginning and downloads all the messages. But then  I get a message that the Upgrade failed and that the index is damadge