Stock streamer won't load after 4.1.1 update on 10/15/07
After loading latest mac update---get white screen upon restart---then mac uprights itself to normal desktop and functions but stock streamer will not load. Any ideas on removing update? Thanks much.
Message was edited by: chivibe
loriac wrote:
....Back up originals on external drives prior to import ...
Wow - so Aperture with vaults on a different disk is not sufficient?
Importing directly into an images app unnecessarily adds hardware risk and human-error risk to originals which is not good. No problem of course, until something happens, like BP in the Gulf or the nuclear plants in Japan.
...The Library should live on an internal drive kept less than approx. 70% full.
Just curious - why?
Internal drives are SATA-connected hence overall faster throughput than even FW800 (USB is really poor). And drives slow as they fill; 70% full is my arbitrary guideline to stay below, but 50% full is faster than 60% full is faster than 70% full is faster than 80% full (one of the reasons I dislike disk-space-gobbling Managed Masters).
[EDIT] Thunderbolt on new Macs properly configured will allow external drive throughput equal to internal drive throughput.
Above 85% full or so on an internal drive stability also becomes at risk. Data-only external drives can be allowed to get quite full if we don't care about speed (such as for off site backup).
-Allen
Similar Messages
-
I tunes store won't load after 11.1.3 update
I Tunes store won't load after i updated itunes . Its the 11.1.3 update
Hello Papamax,
And welcome to Apple Discussions!
Have you ran an iTunes *Network Diagnostics Test* yet? If not, use the steps provided in this Apple support document to do so, and then paste your results here.
http://support.apple.com/kb/HT3204
Also, try temporarily disabling McAfee and see if that helps. And make sure you have allowed iTunes through its firewall, by using the instructions provided in this article.
http://www.technipages.com/allow-program-access-through-mcafee-personal-firewall .html
And lastly, see if any of the troubleshooting steps provided in this Apple support document can assist you.
[iTunes for Windows: iTunes Store connection troubleshooting|http://support.apple.com/kb/ht1527]
B-rock -
Safari won't load after 10.5.3 Update
Since installing 10.5.3 Safari won't load anything. I reset Safari, re-installed 10.5.3 and nothing. Other apps now open much more slowly. Firefox works fine; Safari won't work at all.
I tried Disk Utility, repair permissions, etc, etc. Reinstall Safari? When you download Safari 3.1.1 and try to install it, it won't, and you get this message:
You cannot install Safari on this volume. This update requires Mac OS X 10.5.2 or newer.
Incidentally, there are no error messages when trying to open a page with Safari. It just hangs.
I'm not going to keep screwing around with this unless someone comes up with a definitive fix. Safari never opened every web page I went to, anyway. I'll just use Firefox from now on. Incidentally, did you know the Phoenix and Chicago Apple stores don't use Safari on their floor models? That ought to tell you something. -
ITunes is giving me a runtime error and won't load after trying to install update
After trying to install the latest update to iTunes my iTunes will no longer work. I've tried uninstalling and re-downloading and still get the same runtime error
Hello Scottee2hottee,
Thanks for using Apple Support Communities.
it may be necessary to remove all traces of iTunes and related software components from your computer before reinstalling iTunes.
For more information on this, take a look at:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
1. Remove iTunes and related components from the Control Panel
2. Verify iTunes and related components are completely uninstalled
3. Reinstall iTunes and related components
Best of luck,
Mario -
My apps won't load after updating to iOS4.3.2. What to do?
My apps won't load after updating to iOS4.3.2. What to do?
Yes, I tried that (thanks for the suggestion, though!). In my music app, when I click on certain songs, the screen moves to try to start the song, but then it bounces back to the menu screen without playing the song. On many albums, when I click on the first song, a song about halfway through the album will start to play rather than that first song. My other apps seems to be fixed, but not the music function.
-
Lightroom 5 won't load after 30 day trial of Lightroom3 error.
I tried the 30 day trial of Lightroom 3 that I got with the Photoshop Elements 10 when I got my new computer. The Lightroom loaded one picture and said I had an error and would try to find a solution. I bought Lightroom5 and tried to install it and it keeps going back to the error of Lightroom 3 trial. I tried to delete all programs associated with Lightroom and reinstall, but nothing happens.
it just reads "Lightroom-Opening Catalog:New Years Day 2014 031.JPG.Ircat assertion failed!
New Years day 2014 is a folder and 031 is the picture in the folder that I tried to enhance in the 30 day free trial of Lightroom 3. I bought Lightroom 5 from B &H and it appears to be hung up on the Lightroom 3 trial.
kglad <[email protected]> wrote:
kglad http://forums.adobe.com/people/kglad created the discussion
"Re: Lightroom 5 won't load after 30 day trial of Lightroom3 error."
To view the discussion, visit: http://forums.adobe.com/message/6048439#6048439 -
Old emails won't load after upgrade to Mountain Lion
old emails won't load after upgrade to Mountain Lion
See if anything in here will fix it:
1. Hold down the Command and Option keys as you click the iPhoto icon.
The Photo Library First Aid window opens: -
Safari won't load and I can't update my software, ie., I get an error message. What can I do to fix this?
You can't install Safari 3 on your 10.3.9 OS.
You must use the DVD installer to re-install the older version of Safari found on it.
You can update your operating system buy purchasing Tiger (10.4) and get a more modern version of Safari. -
i phone will not play streaming music through usb after ios 5.0 update. updated to 5.1.1 did not not correct problem.
i phone will not play streaming music through usb after ios 5.0 update. updated to 5.1.1 did not not correct problem.
-
HT4623 iPhone 4S won't start after iOS 6.01 update any ideas
My iPhone 4S won't start after doing the latest update that came out today I believe it was iOS 6.01 or 6.1
Have already tried that to no success. I have hooked it up to the computer and itunes came up saying phone was in recovery mode and needs to be restored.. So im i the middle of trying that. Thanks for the suggestion..!!
-
IBook G4 won't load after latest security update, repair doesn't work?
Hi I had the same problem as someone else in this forum:
"Last night I saw that my ibook G4 wanted to do a security update. I told it to do it, and the ibook has not started since. It reset itself after downloaded, but it just stays on the booting up screen, never actually booting up so I can use it. After about two hours of trying to boot up, I turned it off, and on again, and it still wont boot.
I really need suggestions as how I can fix it. Thanks
ibook g4 Windows 2000
Carolyn Samit
Posts: 8,431
From: Alameda CA Bay Farm Island
Registered: Aug 5, 2005
Re: G4 wont boot after latest security upgrade
Posted: May 22, 2009 2:51 PM in response to: voiletmay
Click to reply to this topic Reply email Email
HI,
Ok... you need to boot from your install disk.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If you cannot boot from your install disk, try booting in Safe Mode
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
If you have the original hard drive in this iBook, it was probably a 60GB drive? When you can do this, check to see how much available disk space there is.
Right or control click the MacintoshHD icon on your Desktop, then click: Get Info. In the Get Info window, click the discovery triangle so it's facing down. You will see; Capacity and Available Make sure you have 10% available disk space, 15% is better. Not enough available drive space can cause issues like you are experiencing.
Carolyn "
I tried restarting it after the repair (there were some things to repair and I tried to repair twice just to make sure it didn't miss anything) but it still won't load. It says its starting the OX system, but when the blue bar reaches the end, it doesn't do anything from there. I also left it on for hours and it did nothing. My mousepad still lets me move around the mouse, the caps lock key still lights up, as the num lock key. I tried safe mode but that won't load either...any other suggestions?*" I also left it on for hours and it did nothing. "*
Your iBook needs to go in for repairs.
Carolyn -
I'm running CFB plugin on Eclipse 3.5.1 on Win 7 x64. I purchased CFB right after update 1 came out, restarted eclipse, entered my key, updated the software, restarted eclipse using the -clean option, and everything worked great. I've been using it for the past week. However, I just restarted eclipse for the first time since I've updated, and it won't load CFB. I get the following error:
Could not open the editor: No editor descriptor for id com.adobe.ide.editor.CFMLEditor
org.eclipse.ui.PartInitException: No editor descriptor for id com.adobe.ide.editor.CFMLEditor
at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:598)
at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:462)
at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595)
at org.eclipse.ui.internal.EditorAreaHelper.setVisibleEditor(EditorAreaHelper.java:271)
at org.eclipse.ui.internal.EditorManager.setVisibleEditor(EditorManager.java:1417)
at org.eclipse.ui.internal.EditorManager$5.runWithException(EditorManager.java:942)
at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3855)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3476)
at org.eclipse.ui.application.WorkbenchAdvisor.openWindows(WorkbenchAdvisor.java:803)
at org.eclipse.ui.internal.Workbench$28.runWithException(Workbench.java:1384)
at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3855)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3476)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2316)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)
at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
Please help!!!To fix this, I launched eclipse again with the -clean option. CFB asked me to enter a key (which I already had done before I applied update 1). I entered the key again and CFB loaded.
I had already run eclipse with the -clean option after installing CFB update 1. I double checked to make sure I didn't have to do this each time I restarted eclipse - I quit eclipse and launched it again, and CFB loaded. Everything seems to be working okay now. -
Zenworks won't load after NW65sp5 install
I'm not sure if this should be posted here or elsewhere...its a java
problem now.
Server is NW6.5SP3 running Zenworks 4. I installed the above service pack
and at the end errored. After reading a similar item in the forum I
renamed the java folder to something else and reinstalled the service pack
which completed this time. Now however, Zenworks will not load due to java
errors.
The two classes that won't load correclty are
..desktop.inventory.servercommon... and
autowsmanagement.wsremoval.removeWorkStations.
Thanks in advance.Fredr,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Safari won't load after update
I updated my MBP to 10.5.6 today, after the update Safari won't load at all on administrator account. I went to Preferences and trashed the .plist and that didn't help. It does load on the guest account.
Any suggestions?
I want to keep using Safari because of my iPhone and MobileMe.
Thanks.Would that be in the console log inside disk utilities?
Here's the info from today, I will try and find it from the other day if needed.
12/20/08 7:39:53 AM com.apple.launchd[68] (com.flyingmac.farfinder.updater[877]) open("/Library/Logs/FarFinder/launchd.updater.log", ...): No such file or directory
12/20/08 7:39:53 AM FarFinderUpdater[877] Can't find the application
12/20/08 7:39:53 AM com.apple.launchd[68] (com.flyingmac.farfinder.updater[877]) open("/Library/Logs/FarFinder/launchd.updater.log", ...): No such file or directory
12/20/08 7:40:21 AM com.apple.Safari[976] NO
12/20/08 7:40:21 AM com.apple.launchd[68] (com.apple.Safari[976]) Exited with exit code: 1
12/20/08 7:40:24 AM com.apple.launchd[68] (com.apple.Safari) Throttling respawn: Will start in 57 seconds
12/20/08 7:41:25 AM com.apple.Safari[979] YES
12/20/08 7:42:19 AM com.apple.launchd[68] ([0x0-0x72072].com.apple.Safari[982]) Exited: Terminated
12/20/08 7:44:30 AM com.apple.launchd[68] ([0x0-0x75075].com.apple.Safari[991]) Exited: Terminated
12/20/08 7:45:40 AM com.apple.Safari[1026] YES
12/20/08 7:45:56 AM com.apple.launchd[68] ([0x0-0x79079].com.apple.Safari[1030]) Exited: Terminated
12/20/08 8:03:37 AM Preview[352] -[<IKKnobLayer: 0x1f0671b0> display]: Ignoring bogus layer size (1050.381714, 0.697937) -
System won't load after startup repair - Satellite A500
Hi guys,
I've got a problem with my laptop. I shut down my laptop directly by switching off from the switch. After I start the laptop the system recommends startup repair but it was unable to repair and after that it just went up to the welcome page and it won't load anymore.
Do anyone have any idea what is the problem?
Thank youhi plioe,
can you run chkdsk on the hdd?
do you hear unusual sounds from the harddisk?
it seems that your harddisk has some problems...
this causes a slow startup or failure to boot...
but to be sure a recovery is recomended in some cases the software configuration went bad...
Maybe you are looking for
-
WIndows 7 64-bit system printing to a Windows 2000 server configured as a print server
Is there any way to configure a new Windows 7 64-bit computer to use a Windows 2000 server configured as a print server ? The printer that I would like to connect to is an HP 4240n LaserJet. I appears that there is only a 64-bit Universal Print Drive
-
Error while creating web dynpro application
Hi All I created one web dynpro application but while executing 1 encountered 1 error below : "Die URL enthalt keine vollstandige domainangabe (The URL does not contain full domain specification) (gcecc62 statt gcecc62.<domain>.<ext>)." Please help h
-
Cant't start node on the cluster
when I start my node in the cluster I have this error, what I should do to solve this? <Oct 30, 2011 11:06:00 PM BRST> <Error> <ALSB Statistics Manager> <BEA-473003> <Aggregation Server Not Available. Failed to get remote aggregator java.rmi.UnknownH
-
Firefox will not restart after installing firefox sync under Snow Leopard Mac OS X
Firefox version 3.6.10 Mac OS X version 10.6.3 A similar problem also appeared in Xmarks
-
How Do I change my identity in messages
Since the last upgrade of iOS I show up as my wife's contact information. Where is the setting to re assign my proper identity to my IM tag. I would rather not pose as someone I am not.