Stock transfer 301 Movt Type

Hi,
I am doing Movt Type 301 Plant to Plant Stock transfer for unrestricted stock in one plant to another
The materials has QM activated with 08 inspection Type Active. Control of IL is such that only one IL gets created for plant/sloc/batch
After doing the first posting, I have done UD for the IL and posted stock to unrestricted. Then I tried to do multiple postngs to same sloc/batch
For the subsequent postings, for some materials the stock gets posted to quality and for some it gets posted to unrestricted. What should be the normal behaviour
What can be the reason

Hi,
Though I'm not sure I understood it correctly or not but seems you have issues with transfer postings (301 mvmnt with all QM active) and some of them goes to QI stock whereas others go to UR.
If that's the case, I believe you should check your inspection set up and look for 'Post to insp stock' under inspection type 08.
ntn

Similar Messages

  • Stock Transfer by movement type 301 referring STO

    Dear Experts,
    I am unable to generate a stock transfer referring an STO in MB1B or MIGO by movement type 301. I am successfully doing whenever I refer a Reservation. Please advice.
    Regards,,
    Subhro Chakravarty

    Hi,
    i have to ask you to read the SAP Documentation for 'Stock Transfer Using a Stock Transport Order'.
    It is explained there how to post a goods movement for STO.
    http://help.sap.com/erp2005_ehp_04/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm
    br, G

  • Stock transfer under quality type

    Hi,
    A material u2018X1u2019 was purchased six month before from external vendor.    At the time of procurement quality parameter was checked and material was transferred to unrestricted type. Now we want to sale or stock transfer of this raw material to other plant. Corresponding stock transfer order has been prepared.  Receiving plant want, after MIGO material status will be u201Cquality type u201C.  So that quality parameter further is re-checked.
    Please explain step by step standard configuration.
    Thanks & regards,
    Amit Biswas

    Hi Amit,
    You can carry out inspection at receiving plant. Letu2019s assume A is supplying plant and B is receiving plant.
    It does depend upon which movement type you use for inwarding the material in B plant.
    1.     If you are doing one step transfer by 301 movement, then activate inspection type 08 in material master of B plant
    2.     If you are inwarding by 101 movement, then activate inspection type 01 in material master of B plant
    Regards,
    Anand Rao
    Edited by: Anand Rao on Aug 23, 2011 2:14 PM

  • Stock transfer 352 mvt type reversal issue

    HI
    In mb11 t.code 352 trfr pstng to stock in transit from unrestr.-use - reversal system asking account determination entry
    1000 AUM __ 3000 not possible why system asking AUM Expense/revenue from stock transfer GL account in obyc.
    same  price in supplying and receiving plant in material master while mb11 t.code 351 mvt type accounting document inventory posting (BSX) GL account is taking my system,so during reversal in mb11 352 mvt type which GL i need to assign in Expense/revenue from stock transfer (AUM) Whether i need to assign inventory posting (BSX) GL or price difference GL account.(PRD)which GL i need to assign wt is reason.plz suggest.
    Regards
    Sam

    Hello,
    Go to FS00 --> 62000026 --> Click on the edit cost element button, it will take you to cost element screen. If you have a cost element , enter the same. Otherwise create a cost element with KA01, give G/L account and controlling area, save.
    Prase

  • Stock Transfer using movement type 309 of in-transit material

    Hi Gurus,
    We have a scenario where we want to post a 309 movement type on an intransit STO stock (sto is done from PWO, this is done to solve a SOX compliance problem). But it seems that this is not possible as the 309 can not be posted without a s. loc. Is there any alternative to this? Can a two step transfer using 313 and 315 do the trick? Please advise.
    Thanks

    In real life you cannot do anything to a material that is somewhere on the road, hence it is pretty limited what you can do in SAP.
    What exactly do you want to do?

  • Transfer posting movt type 309

    Hi Guru,
    I want to do the transfer posting material to material 309 movement type but base unit of measure different kg & MT.
    Input material having Base unit of measure kg & receiving material having base unit of measure MT.
    System giving this error message.
    The "receiving" material is not managed in the same stockkeeping unit as
    the "issuing" material. A transfer posting "material to material" is
    only possible if both materials are managed in the same stockkeeping
    unit.
    Please help me out its very arjent .
    regards,
    KIrti

    i want to do the transfer posting material to material 309 movement type but base unit of measure different kg & MT.
    Input material having Base unit of measure kg & receiving material having base unit of measure MT.
    How to do this please help me out MB1A 201old material ,but i am not getting u ,please tell me step by step.
    System giving this error message.
    The "receiving" material is not managed in the same stockkeeping unit as
    the "issuing" material. A transfer posting "material to material" is
    only possible if both materials are managed in the same stockkeeping
    unit.
    Please help me out its very arjent .
    regards,
    KIrti

  • Problem in 301 Stock transfer via VLMOVE for Handling Unit movement

    Hi Gurus
    I am having one issue, where handling unit is active. So user facing one issues that user has posted the stock  around 10 qty , after some material movements , stock showing as 9 in MMBE , where as checking the handling units showing  10 In HUMO . Now user wants to do the stock transfer 301 via VLMOVE. But system is giving error message like u201Cdeficit of stock, handling units can't be movedu201D, anybody advise is there anyway how user can do this transaction.
    Regards
    Edited by: venkat g on Aug 19, 2010 1:03 PM

    Hi,
    The solution for creating inbound delivery that you people have suggested is already in place. The problem is not with creation of inbound delivery but with assigning the material HUs to the inbound delivery. As material HUs are having status assigned to Shipment Document which is created after outbound  delivery is processed. How should I go about it? Even after status of shipment document is made complete, assignment of HUs to inbound delivery is not possible. Please help to resolve this issue.
    Thanks and regards,
    Sudhir Dahake

  • Stock Transfer of Blocked Stock Plant-to-Plant

    Hi..
    I have an issue regarding Stock Transfer of blocked stock from one Plant-to-Plant.
    I realize that blocked stock cannot be transfered directly.
    But the issue here is that if we cannot transfer the blocked stock directly, that means we have to do transfer posting from blocked stock to unrest use then stock transfer using mov type: 301. Then in the destination plant, we transfer again to blocked stock.
    If this is applied, then it will potentially raise other issues related to incorrect stock transfer by the other users once the material is released to unrest. use.
    So, in short, that's why we need to have direct stock transfer scenario for this issue.
    Kindly have your assistance
    Thanks in advance
    Albert

    Hello Albert,
    You are correct. We can not transfer blocked stock from one plant to another and you have to follow the same steps which you already mentioned.
    As per the business logc, We can not move "Blocked" (Business term: Rejected/scrapped/spoiled) material out of our business unit except Retrun to Vendor or Scrap it. so it is also not logical to move "THAT kind of Stock" to another plant.
    Hope this helps.
    Regards,
    Arif Mansuri
    Reward if answer is helpful.

  • Delivery cost for Stcok transfer through M.type : 351

    Hi Experts,
    Can anybody explain how to capture the delivery costs for Stock transfer through M.Type 351.
    Also kindly explain the steps involved in configuration of the same.
    Thanks in advance,
    Prabu

    Hi,
    Once the Config releated to Setup stock transfer order is done.
    To include the cost you need to include the pricing procedure related to STO needs to be assigned to your schema group.
    Goto SPRO -MM-Purchasing -- Conditions
    Here you need to assign the Schema determination RM2000 to your Purchasing organization.
    Then when you create the STO in the recieiving plant, then you will get the condition tab in the item details of STO, there you can maintain the delivery costs for that material & send the STO to your supplying plant.
    Supplying plant will send the material through MB1B & with mvt type 351 to recieving plant.
    At the time of Goods reciept system will capture the delivery costs in the recieving plant for that STO.
    rgds
    gsc

  • Cross-company stock transfer with delivery function!

    Dear friends:
          I have a problem to borther u,I create stock transfer order with type 'NB',and then create delivery by T-CODE:VL10B with reference to the transfer order,but the log show the following error message:
       1030000484 000010 Sales unit  is not valid for item 000010
       Diagnosis
        The sales unit is not allowed for the material in item
        000010.
    System Response
        The system does not allow further processing of this item.
    Procedure
        Check your entry.
        Select a sales unit which is defined for the material in the
        material master record. Normally the sales unit will be
        determined immediately from the master master record.
    I really don't know how to deal it.
    thanks.

    UOM is in which stocks of the material are managed. The system converts all the quantities you enter in other units of measure to the base unit of measure.
    In the material master [MM02] check as to what is the base unit of measurement in the Sales Org1 tab and Purchasing tab. It seems that both these would be different as the system is not able to convert the UOM from Purchsing unit to the sales unit.
    Next, click the button for 'Additional data' [CTRL+F6], tab Unit of measure and enter the conversion for the UOM.
    For more details refer to the link below.
    <a href="http://help.sap.com/saphelp_46c/helpdata/en/ff/516a6749d811d182b80000e829fbfe/frameset.htm">UOM Details</a>
    In the link, follow the path Material Master Records-Additional Data-Units of measure.
    Regards,
    Gauravjit.
    Reward points if the solution is helpful

  • Material Ledger for Stock Transfer Postings

    Hi All,
    I have a question about the way material ledger is calculated for stock transfer postings (movement type 641). I will give an example to illustrate this issue:
    Material A has a Standard cost of $10
    Material B has a Standard cost of $8
    During the month 100 units were transferred from material A to Material B. This created a financial posting as follows:
    Credit Material A -          $1000                               
    Debit Material B -           $800
    Debit Price Difference    $200
    This price difference of $200 was used in the calculation of Actual cost for material B
    However, the Actual Cost for Material A was $9. I would have expected the system to use this actual cost to calculate the difference to be posted to material B. Hence the difference used in Material B should have been $100 {(9 – 8) X 100} and not $200.
    Has anyone had a similar issue, or know how the system resolves this (if at all)?
    Points will be rewarded for relevance.
    Thanks

    Dave, I see that your process is slightly different to mine. We do not revalue inventory at month end, instead the material ledger program posts the revalued amount to a reserve account and the actual cost is only a statistical entry. The material ledger calculation is reversed automatically in the new month and the standard price is used for valuation.
    I think this might make it difficult for the system to value STO's at actual. I may need to check with SAP.
    Thanks

  • In Stock Transfer PO, storage location should be RECP

    Hi,
    We have a requirement that when we make the Stock transfer PO, Order type is UB....then storage location should be RECP by default.
    Means in every STPO storage location should be RECP. They should go through RECP location and this should be not changeable..
    Please guide..

    Thanks dear...
    Our motto is not fulfilled from entering the storage location in material master MRP view in field "storage location EP". For this we have to maintain the Storage Location manually when creating STPO.
    But our requirement is that when we select the Stock Transfer Order - UB option in ME21N, storage location comes by default RECP and non changeable.  We don't want change Storage location in any cost.
    Plz. guide....

  • KANBAN Stock Transfer Question.

    Hi All,
    I am using kanban stock transfer stratergy(Mvmt type -311) to transfer my stock from one Sloc to another Sloc. I have given one fixed quantity and everytime that quantity is tranferred between sloc's. Now, My question is can give a tolerance limit to that kanban Quantity.
    For example, If my kanban quantity is 500 Pc's can I provide a tolerance limit of 10% so that I can transfer the stock anywhere between 450 and 550. Please let me know if this functionality is possible.
    Thanks in advance,
    Sushil

    Hi,
    As per standard SAP Practice , there is no provision of adding tolerance to Kanban Qty but you can replenish 450 /550 by manually editing the Kanban quantity in Kanban Correction.You can do Kanban correction in PK31n or directly by right click & selecting Kanban correction in Kanban Board screen.
    Other way is you can use Event driven Kanban for one time replenishment of 450/550 so that you need not disturb the main Control cycle of Classical Kanban.
    Even as per my knowledge, there is no BADI for Kanban which can help your requirement.So pls try above.
    Hope this helps.
    Revert if still any doubt.
    Regards,
    Tejas

  • 944 warehouse stock transfer

    Hi,
    Can anybody please tell me for "944: warehouse stock transfer", which Idoc type, Message type we can use to post in to SAP please (Inbound).
    Thanks with regards,
    Rao.

    Hi
    This Standard contains the format and establishes the data contents of the Warehouse Stock Transfer Receipt Advice Transaction Set (944) for use within the context of an Electronic Data Interchange (EDI) environment. The transaction set can be used by a receiving location to advise a depositor or an agent of the depositor that a transfer shipment has been received. This transaction set provides the depositor or the depositor's agent with detail information concerning product that has been received.       <a href="http://www.rapidnet.org/Portals/9/Stds_Tools/archives/s9444010.pdf">RAPID 944 Standard (4010 - February 1999)</a>
    <a href="http://www.rapidnet.org/Portals/9/Stds_Tools/archives/g94x4010.pdf">Guidelines for Warehouse Transaction Sets</a>

  • Stock Transfer Order (UB) NACE settings help

    HI friends
    we want to create print out for stock transfer order(order type 'UB').
    data move from DD1 plant to plant DD4...
    my output type is : ZDSI
    Application 'EF'
    i know if the doc type is 'NB' i can create condition records for vendor,com  ode......
    now my case There is no vendor  how can i create the condition records for plants as a patners.
    please help me.
    Thanks
    Narasimah Rao

    You will need to create a custom access sequence
    and include a new condition table there if its not already available
    use this access sequence in your output type

Maybe you are looking for