Stock transfer between 2 different storage location

Hello ,
Is anybody can help ? We have below scenario :
Plant : P1 P2
WH  :   W1 (W1 cross 2 different plants P1 and P2)
Storage Location : S1 S2 under W1
We want MRP can trigger the replenishment between 2 different storage location within same warehouse
but the warehouse is cross 2 plants
Thanks !

Dear Denny,
Pls. maintain following setting which will fulfill your requirement :
Go to Material Master -> MRP-2 View -> Special procurement type
40     Stock transfer (proc.from alter.plant)
Try above & revert in case any doubt.
Hope this helps.
Regards,
Tejas

Similar Messages

  • Stock Transfer between 2 Storage locations

    Dear All
    I want to configure Stock Transfer between 2 Storage locations.
    I have activated the same in configuration but can anybody provoide complete details at to how the process happens.Is there any standard document type to be used like UB in case of stock tranasfer between plants,do we craete SD Delivery etc.
    Regards
    Vaibhav Mahajan
    Edited by: Csaba Szommer on Aug 22, 2011 12:56 PM

    Hi
    Stock Transfer between 2 Storage locations,there is no seperate configuration needed( like stock transport order b/w plants  doc type UB), just goto MIGO
    There are 2 options are there for Stock Transfer between 2 Storage locations
    1. one step procedure movement type 311(from unrestricted to unrestricted)
                                                                   323(from quality to quality)
                                                                   325(from blocked to blocked)
    2. Two step procedure movement type 313 and 315(only possible from unrestricted to unrestricted stock)
    During this transfer no accounting document will generate because you are transferrring the stock within the plant,
    Thanks

  • Stock transfer between Plant/Storage location to Plant/Storage location

    Dear Experts,
    This is a MM component of SAP Retail.
    We have 4 brands ( Plants of type B, Plants of type C etc) that needs inventory from the same Distribution center (Plant A) for some common products. Here the direction is to prioritize the inventory per brand. The requirement is one brand should not take the inventory of the other brand.
    To overcome this problem , the solution proposed is to have different storage location for different brands in the same DC.
    When we run replenishment  planning for the brands and do a ATP check, the availability check should consider only the one issuing storage location in the DC which we allocated for the brand.
    I do see the following set up in SPRO and I have done the following.
    Step1: Activate Stock Transfer between Storage Locations
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> u2018Activate Stock transfer between storage locationsu2019
    Step2: Assign Delivery Type and checking rule according to storage
    SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations->Assign Delivery Type and Checking Rule According to Storage
    Step3: Define Shipping Data for Stock Transfer between Storage Locations
    SPRO ->Material Management ->Purchasing ->Purchase Order ->set up stock transport order ->set up stock transport order between storage locations -> Define Shipping Data for Stock Transfers between Storage Locations

    Step4: Define Rule for Determination off Shipping Point
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations -> Set-up Storage-Location u2013dependent shipping point determination->Define rule for determination of shipping point
    Step5: Shipping Point Assignment According to Storage Location
    SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> Set-up Storage-Location u2013dependent shipping point determination-> Assign Shipping Points According to Storage Location
    Question.No:1- After completing the above set up  in me21n, the issuing storage location field is greyed out. I am not able to enter any value here. Can you please help.
    Question.No:2
    I do see the following setting.
    Under IMG ---> Material Management ---> Purchasing --> Purchase Order --> Set up Stock Transport Order -->Business Add-In for Determination of Issuing Storage Location
    Display the IMPLEMENTATION
    Double click on the method GET_SUPPLYING_SL
    Click the Execute button
    Click the detail button on IF_EX_MD_EXT_SUP
    Execute GET_SUPPLYING_SL
    There is a prerequisite for this BADI .I have done those things.What i dont understand is where to force the combination of supplying site/issuing stor.loc/receiving site/receiving stor.loc
    Kindly provide your inputs.
    Thanks,
    Vasanthan

    Dear,
    Have You configure MRP in second plant (where you want to transport the Material).
    Please try with this and do again Po for stock transport.
    Regards
    Piyush Patel

  • Stock transfer between stor loc. of same plant triggered by Sales Order

    Hello everyone
    I need some input regarding triggerring Stock Transfer between 2 storage locations of the plant from a Sales Order.
    Sales Org: ABCD
    Plant: WXYZ
    Stor Location: 0001 & 0002
    Now here 0001 is the Picking location for the Delivery Document.
    However 0002 is where all the stock is stacked.
    Physically they both are different buildings in the same vicinity.
    The Business wants the Sales Order to trigger the stock movement from 0002 to 0001 on a daily basis.
    So from a end user prospective, they will move the stock from 0002 to 0001 for all the items needed to fulfill the Orders due for Shipment for that day.
    What options do I have for this ?
    Thanks
    Vin

    Well actually the Selling Org ABCD is of a different Company code .. it is a typical case of Intercompany Sales .. where the Plant WXYZ is belonging to another company code.
    I have setup the Intercompany Sales Process .. and want to trigger the Stock movement as mentioned above.
    I have configured the STO for storage location - stor. location in a Plant. ...
    However I am struggling to trigger a STO from a Sales Order.
    I tried using the Schedule Lines to trigger a Pur. Req ... however the Supplying Plant field remains blank (which is the same in this case as it is a stock movement between 2 locations of the same plant).
    The flow looks somewhat like this
    Sales Order -
    > Stock Transfer PR in Plant WXYZ -
    > Delivery Doc for the STO --- > MIGO to receipt the inventory in 0001 -
    > Delivery DOc for Sales Order -
    > Invoice for end customer --- > Intercompany Invoice
    If anyone has automated creation of a STO from a Sales Order .. please advice
    Thanks
    Vin

  • Stock transfer between storage locations and lead time

    Hello,
    We use stock transfer orders between different storage locations. Is it possible to maintain the transport lead time between storage locations somewhere or do in need to use routes and scheduling?
    rgsd
    GAR

    Hi,
    Try using movement type 313 and 315
    313 -- Transfer posting SL to SL --- Remove from issuing SL
    315 -- Transfer posting SL to SL  -- Placing in Receiving SL
    Regards

  • Stock transfer between plants without STO and storage locations

    Hi.
    In case of stock transfer betwen storage locations with one step it is possible to do stock transfer between different stock types. But in Two step it is only possible to do stock transfer from unrestricted to unrestricted.
    In case of Stock transfer between Plants without STO in one and two step stock transfer, it is possible to do stock transfer  from unrestricted to unrestricted.
    Is there any reason for this?

    Hi
    Thanks for your reply. But i could not understand the sentence - But this is not possibles with 2 step procedure. becasue 2 step is recored will be maintained . In 2 step it not possible. Can you please eloborate on this
    Regards,
    Vivek Swarnapuri

  • Stock Transfer between Storage Location with Order

    Dear MM experts, 
    I am into SAP SD.
    Our client wants to Transfer Stock from one Storage Location to another Storage Location of the same Plant. (This can be easily done thru MB1B via Transfer Posting)
    But the unique requirement here is they require some kind of Delivery Order or Tansfer Order to be created first & only based on that document user can transfer Stock between Storage Locations of a same Plant. (Similar to Inter-Plant Stock Transfer where we create Stock Transfer PO & then move goods between plants).
    Can you please suggest on how to achieve the above scenario.
    Thanks,
    Jignesh Mehta
    Mumbai

    hi
    Stock Transfer between Storage Locations
    u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
    u2022 As a result of which user can input issuing storage location with supplying plant.
    u2022 Facility of using different delivery types for different issuing storage locations is available.
    u2022 Shipping Point data can also be determined based on the issuing storage location.
    refer following
    http://sapfunctional.com/MM/StockTransfer/Configure.htm
    http://help.sap.com/saphelp_scm41/helpdata/EN/23/29cf20eabe094e957763a46aa5be9d/content.htm
    regards
    kunal

  • QM/MM: Stock transfer from QI to QI in different storage location

    Hi Gurus,
    I want to transfer a QI stock to QI stock in the same plant but different storage location using MB1B – 323 movements. But it has got QM status active. So without taking usage decision it doesn't allow us to move the stock. It needs a special inspection type which allow this transaction.
    I don’t want to create another inspection lot and don’t want usage decision.
    Can anyone suggest me the solution?
    Thanks
    Shiv

    Hi Laxman,
    Thanks again for your suggestion to use QAC2.
    Is there any way of of scapping the same stock stock having inspection lot , status QI w/o UD?
    Thanks
    Shiv

  • Stock transfer between storage location in IS -Retail

    Hi,
    I want to have a Stock transfer order between two storage locations in the plant.
    I have activated the "Activate Stock Transfer Between Storage Locations", now i can create a STO and have the "Issuing SLoc" tab.
    Having that i get an error message "Not possible to determine shipping data for material XXX" Message no. 06280.
    I am trying to have the shipping data in customizing for set stock transfer  - "Define Shipping Data for Plants", but my site is not listed due to the use of IS Retail. Is there a way to configure it?
    Tnx
    Lior

    Hello Lior,
    in Retail your distribution center is a vendor and a customer, and your store is a customer. Therefore when you create master data for your distribution centre and store, you also create the vendor and customer masters that are required.
    By this link of the DC / Store to the customer master the shipping data is derived. I hope this answers your question.
    If you have further queries related to this, please do post them.
    Regards,
    Smitha

  • Stock transfer order between two storage locations in IS Retail

    Hi,
    I want to have a Stock transfer order between two storage locations in the plant.
    I have activated the "Activate Stock Transfer Between Storage Locations", now i can create a STO and have the "Issuing SLoc" tab.
    Having that i get an error message "Not possible to determine shipping data for material XXX" Message no. 06280.
    I am trying to have the shipping data in customizing for set stock transfer - "Define Shipping Data for Plants", but my site is not listed due to the use of IS Retail. Is there a way to configure it?
    Tnx
    Lior

    Hola.
    Voy a contestar tu pregunta en espanol. Debes crear al centro  emisor  como  deudor  en la transaccion WB02  y ampliar a la organizacion  de compra.
    Posterior, debes crear al centro  receptor como  acreedor en la transaccion  wb02.
    Cesar Moreno. Funcional MM Retail.

  • Transfer project/ SO stock between 2 storage locations of same plant

    HI,
    We have a requirement in which the we have to transfer  project/sales order stock between 2 storage locations of the same plant.

    Transfer between storage location.
       311 Q - Project Stock
       311 E - Sales Order Stock
    Transfer between storage location to own stock
       411 Q - Project stock to own
       411 E - Sales Order to own

  • Stock transfer between locations involving two different excise duty

    Hi,
    While doing delivery confirmation under O4H1 transaction, I'm facing below error:
    E OB 048
    ED status from valuation type does not match ED status handling type TA UNTAX
    I'm trying stock transfer between locations involving two different excise duty
    statuses.
    -Yati

    >
    YatiAnand wrote:
    > Hi,
    >
    > While doing delivery confirmation under O4H1 transaction, I'm facing below error:
    > E OB 048
    > ED status from valuation type does not match ED status handling type TA UNTAX
    >
    > I'm trying stock transfer between locations involving two different excise duty
    > statuses.
    >
    >
    > -Yati
    Hi Yati,
    The Handling type on your STO and the Valuation type (valuation status) determined at discharge are differing.
    SO your Handling type on STO seems to be a Taxed one and the valuation you are trying to discharge is UT.
    Try using a handling type which is Untaxed but make sure its consistent with rest of the tables.

  • Stock transfer between storage location

    Hi
    I have following requirement.
    I have material which is maintained in two different storage location in same plant at Storage location SLOC1 ( primary location)  and ( Storage location SLOC2). This locations are physically separated by 10 Km.
    My requirement is if stock at Storage location SLOC2 falls below then it should create stock transport order automatically
    Please give all details to be put to maintain configuration and masterdata.

    Hi
    Refer the Link :
    http://www.sap-basis-abap.com/sappq003.htm
    Storage Location included/excluded from MRP
    To control whether a particular storage location will be included or excluded from the MRP run.  (MD02/MD41).
    To exclude it from MRP run :-
    OMIR - Define storage location MRP per plant
    Put the MRP ind. as.         1 - storage location stock excluded for MRP
    To include it from MRP run:-
    OMIR - Define storage location MRP per plant
    Put the MRP ind. as.      space - storage location stock also planned at plant level and save it
    Next go to transaction MM01 - tick only view MRP 2
    Key in Plant and Storage Location
    Look at the Storage Location MRP section
    change the SLoc MRP indicator to space  and save it
    MMD1 - Create MRP Profile - MRP profile is a useful entry aid and makes it easier to manage MRP data.
    You define which fields are filled with values when MRP data is entered in the material master record, which of these values can be overwritten and which not.   You use the information stored in a profile is standard information that is needed again and again in similar constellations when material master records are maintained.
    Regards
    Anand

  • Billing in Stock Transfer between two plants of two different company codes

    Hi Friends,
    I am doing the scenario of stock transfer between two plants of different  company codes.
    I have some issues in Billing for this..
    What are the settings do i need to to for Pricing in SD point of view.
    Ex:
    Supplying         /         Receiving
    Com.Code:2000     /        CompanyCode:1000
    Plant:2100              /         Plant:1100
    SA:2000/10/00      /          SA:1000/10/00
    I created Customer 5555 w.r.t sales area of supplying company code (2000/10/00)
    I created Vendor  7777 and assigned Supplying Plant 2100 in add purchasing data.
    In IMG Settings:
    Define Shipping Data for Plants: In Receving Plant i assigned customer 5555 and sales area blank
                                                        In Supplying Plant i assigned customer blank and sales area as 2000/10/00
    Create Checking Rule: Standard(B SD Delivery)
    Define Checking Rule: Standard(Avallability-01assigned to checking rule B)
    Assign Delivery Type and Checking rule: Document type(NB)-Supplying Plant(2100)-Delivery Type(NLCC)-Checking Rule-(B)
    Assign Doc Type:Supplying Plant(2100)-Receving Plant(1100)-Doc type(NB)
    What are Pricing settings in SD i have to do?????????
    Process:
    ME21N->VL10B->VL02N(PGI)->VF01(IV)->MIGO->MIRO
    I have gone through many threads in Forum but confusion in Pricing Part..
    Some are mixing with the inter company sales proces..
    Pls guide me..
    With Regards

    Do the following steps for STO Customizing:-
    1. Create a customer master record for the issuing plant.
    2. Create a vendor master record for the issuing plant, and enter customer account number in the Customer field on the Control screen.
    3. Repeat steps 1 and 2 for the receiving plant.
    4. Assign the plants to the customer master record in Customizing for Materials Management (MM), by choosing Purchasing <Purchase Order < Set Up Stock Transport Order< Plants.
    The Process Flow would be as follows :-
    Create a stock transport order, following the standard procedure, and send the order to the issuing plant.
    Issuing plant has processes your order, and when it is ready to ship,the storeperson at the issuing plant issues the goods using a transfer posting. The excise clerk there creates an excise invoice.The excise supervisor verifies and posts the excise invoice.It then sends the goods to you, together with the excise invoice.
    Once the goods arrive, you follow the standard procedure for incoming excise invoices:
    The excise clerk captures the excise invoice, using the stock transport order as the reference document. The storeperson enters the goods receipt, again using the stock transport order as the reference document.Alternatively, you can first enter the goods receipt and then capture the excise invoice.
    The excise supervisor then posts the excise invoice.
    Best Regards,
    Ankur

  • Stock Transfer between 2 different instances of SAP

    Hi for all,
    I want to know if anyone has any documentation about how to do a Stock transfer between 2 different instances of SAP, the worst part that I think is how to see a plant from one SAP to another, any collaboration will be appreciate.
    Edited by: Ruy Osório de Freitas Neto on Mar 5, 2008 6:24 PM

    I still don't see the difference between what you are telling me and the material i handled to you....
    This material exactly describes the case where you have to wharehouse working in whatever ERP systems at the same time.
    The ALE configurations are only one step between them.
    The idoc types for purchasing are ORDERS, ORDRCHG,ORDRRSP, Quotes
    For LE are Desadv,Shpmnt
    Processo
    Entrar um movimento de mercadorias no sistema ERP.
    O sistema cria automaticamente um recebimento ou uma entrega com base nesse movimento de mercadorias.
    O sistema transfere o recebimento por meio da BAPI InboundDelivery.SaveReplica (a entrega, por meio da BAPI OutboundDelivery.SaveReplica) do sistema ERP para o SAD, onde representa uma solicitação ao depósito para armazenar ou retirar mercadorias.
    No sistema descentralizado, uma ordem de transferência no depósito é criada para a entrega ou para o recebimento, respectivamente.
    Executar a entrega/recebimento físico(a) das mercadorias.
    Confirmar a ordem de transferência no depósito.
    Após a confirmação da ordem de transferência no depósito, é lançada a entrada de mercadorias para o recebimento (ou saída de mercadorias para a entrega). Isso libera a posição intermediária.
    Essa atividade inicia a confirmação para o sistema ERP por meio da BAPI InboundDelivery.ConfirmDecentral para o recebimento e por meio da BAPI OutboundDelivery.ConfirmDecentral para a entrega.
    O lançamento da entrada ou saída de mercadorias no sistema ERP ocorre automaticamente quando a confirmação é registrada no sistema.
    Quando a entrada ou saída de mercadorias é lançada no sistema ERP, a transferência de estoque é lançada simultaneamente na Administração de Estoques.

Maybe you are looking for

  • Help iMac G4 15" hard drive is 0.00 Volume

    Hi Plz help A flashing question mark appears when i start my iMac G4 15" when i insert installer CD its run and my hard drive is 0.00 Volume, I try partition and Format its not working. Plz tell me how to fix. Thank You

  • Ipad wont power on

    iPad less than a year old.  suddenly won't power on or charge

  • Automatic mailing of sales order to Customer

    hi, My client is using version 4.6B and wants a solution to this problem. When a sales order is created,there should be an option to mail the sales order,i.e soft copy of the sales order to the customer. Also certain branches do not have SAP, but the

  • Unistall Dreamweaver CS6 Trial version

    I try to unisntall the Trial version of Dreamweaver CS6, through the windows uninstall tool, but returns me the message with Error:1...What can I do?...I've also tried to do it with the Ccleaner program, but with no results.

  • ORA-12560: TNS:protocol adapter error rman

    hello all, i am on xp, and 10.2 oracle version....i created a dummy database with name comp using dbca...used FRA and took a backup though rman....i have teh backup now in FRA.... I droped the database to do a test restore...but i cant even login to