Stock transfer between Batch and Non Batch managed Plants

Hi
Plant A is Batch Managed and Plant B is not batch managed.
When I do STO, I want the Batch data from Plant A to be stored in some custom tables (when Inbound delivery is received in Plant B) as it is required for any recall and outbound purposes.
Batch level is unique at Plant level.
Please advise how can I go through the above scenario.
Thanks
Prabhakar

Hi Prabhakar
In STO, the supplying plant is the vendor (batch managed).
So, you may workout for an enhancement to fetch the supplying plant's batch number on to the vendor batch (Field: LICHA) during Goods receipt.
However, incase multiple batches, you should look for lines items in goods receipt.
warm regards
sairam akundi

Similar Messages

  • Stock Transfer Between Excise and Non Excisable plants

    Hi Friends,
                                 I have created STO for excisable plant from non excisable plant. delivery created in excisable plant. But in non excisable plant, I am unable to capture excise invoice.I want the price in non excisable plant as Price+ excise. How to do this? please reply...
    Regards

    Non exciseable plant will create a STO and give it to Exciseanle plant.
    The Exciseable plant will transfer post the stock
    Along with Excise , J1IS created.
    The receipt plant,The Non Excise plant will do the GR . the stock + excise will get added up in the non exciseable plant .
    Rewgads

  • Stock transfer between Plant/Storage location to Plant/Storage location

    Dear Experts,
    This is a MM component of SAP Retail.
    We have 4 brands ( Plants of type B, Plants of type C etc) that needs inventory from the same Distribution center (Plant A) for some common products. Here the direction is to prioritize the inventory per brand. The requirement is one brand should not take the inventory of the other brand.
    To overcome this problem , the solution proposed is to have different storage location for different brands in the same DC.
    When we run replenishment  planning for the brands and do a ATP check, the availability check should consider only the one issuing storage location in the DC which we allocated for the brand.
    I do see the following set up in SPRO and I have done the following.
    Step1: Activate Stock Transfer between Storage Locations
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> u2018Activate Stock transfer between storage locationsu2019
    Step2: Assign Delivery Type and checking rule according to storage
    SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations->Assign Delivery Type and Checking Rule According to Storage
    Step3: Define Shipping Data for Stock Transfer between Storage Locations
    SPRO ->Material Management ->Purchasing ->Purchase Order ->set up stock transport order ->set up stock transport order between storage locations -> Define Shipping Data for Stock Transfers between Storage Locations

    Step4: Define Rule for Determination off Shipping Point
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations -> Set-up Storage-Location u2013dependent shipping point determination->Define rule for determination of shipping point
    Step5: Shipping Point Assignment According to Storage Location
    SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> Set-up Storage-Location u2013dependent shipping point determination-> Assign Shipping Points According to Storage Location
    Question.No:1- After completing the above set up  in me21n, the issuing storage location field is greyed out. I am not able to enter any value here. Can you please help.
    Question.No:2
    I do see the following setting.
    Under IMG ---> Material Management ---> Purchasing --> Purchase Order --> Set up Stock Transport Order -->Business Add-In for Determination of Issuing Storage Location
    Display the IMPLEMENTATION
    Double click on the method GET_SUPPLYING_SL
    Click the Execute button
    Click the detail button on IF_EX_MD_EXT_SUP
    Execute GET_SUPPLYING_SL
    There is a prerequisite for this BADI .I have done those things.What i dont understand is where to force the combination of supplying site/issuing stor.loc/receiving site/receiving stor.loc
    Kindly provide your inputs.
    Thanks,
    Vasanthan

    Dear,
    Have You configure MRP in second plant (where you want to transport the Material).
    Please try with this and do again Po for stock transport.
    Regards
    Piyush Patel

  • Stock transfer between stor loc. of same plant triggered by Sales Order

    Hello everyone
    I need some input regarding triggerring Stock Transfer between 2 storage locations of the plant from a Sales Order.
    Sales Org: ABCD
    Plant: WXYZ
    Stor Location: 0001 & 0002
    Now here 0001 is the Picking location for the Delivery Document.
    However 0002 is where all the stock is stacked.
    Physically they both are different buildings in the same vicinity.
    The Business wants the Sales Order to trigger the stock movement from 0002 to 0001 on a daily basis.
    So from a end user prospective, they will move the stock from 0002 to 0001 for all the items needed to fulfill the Orders due for Shipment for that day.
    What options do I have for this ?
    Thanks
    Vin

    Well actually the Selling Org ABCD is of a different Company code .. it is a typical case of Intercompany Sales .. where the Plant WXYZ is belonging to another company code.
    I have setup the Intercompany Sales Process .. and want to trigger the Stock movement as mentioned above.
    I have configured the STO for storage location - stor. location in a Plant. ...
    However I am struggling to trigger a STO from a Sales Order.
    I tried using the Schedule Lines to trigger a Pur. Req ... however the Supplying Plant field remains blank (which is the same in this case as it is a stock movement between 2 locations of the same plant).
    The flow looks somewhat like this
    Sales Order -
    > Stock Transfer PR in Plant WXYZ -
    > Delivery Doc for the STO --- > MIGO to receipt the inventory in 0001 -
    > Delivery DOc for Sales Order -
    > Invoice for end customer --- > Intercompany Invoice
    If anyone has automated creation of a STO from a Sales Order .. please advice
    Thanks
    Vin

  • GATP Stock transfer between two sublocations

    Hello,
    Is it possible to use Rules Based ATP to create an Stock Transfer between two sublocations in the same plant?
    The source sublocation (Storage Location) is assigned to a Storage Location MRP Area
    In the Rules we have defined a Location determination procedure that if it does not find ATP quantities in the main location it searches in the Storage Location MRP Area (Location Type 1077). The idea behind this rule is to treat the Storage Location MRP Area as a diferent location, but it does not works.
    I thank in advance for your kind cooperation.

    Hi Loknath / Verma,
    The STR  is between a Production Location an a MRP Area Location.
    I have created the rule, but no STR are created.  It does something very strange instead of what is expected.
    For example,
    I have 2 storage locations in PLANT1:
    - STL1 has 100 units of product 1
    - STL2 has 200 units of product 1. This SL is assigned to an MRP area
    In APO the No check on sublocation level  check is unchecked.
    I have cifed production location and the MRP area so two locations are created: one is  type 1001 and the other is type 1007.
    I have defined a Rule, so if there is not enough ATP cuantities in PLANT1 (Type 1001) it should search in the MRP Area (type 1007)
    If I have a sales order that asks for 150 units, rule is trigered.
    First thing that is very strange: when I see the Storage location substitution list, I cannot see the MRP Area. What I see is the production location.
    The other problem is when i look at the ATP quantities during ATO verification, they do not match with the ones I can see in RRP3.
    Anyway, I have taken a look at the link that Verma sent me, and I understand that if I use RBATP to create STR between storage locations, sub positions are created, and there is a requirement in our project that no subpositions should be created. So, even if I can make it work, I cannot used... Seems that I may investigate the problem in my spare time.
    Thanks a lot for your help.

  • Stock transfer between Excise Plant and Non Excise Plant

    Scenario : Stock is imported from say Singapore. One of the import duties can be claimed back as CVD and pass the benefit to customer.
    Requirement : Stock transfer between Excise Plant and Non Excise Plant
    Question : i) If I do stock transfer from Excise plant to non-excise plant, can I transfer the CVD amount which I captured in RG23A - Part1/Part 2?
    ii) If I do stock transfer from Non- Excise plant to Excise plant, can I get the benefit of CVD and pass on that benefit to customer?
    Pls let me know the possiblity of above two in SAP and Legally?
    thanks in advance
    Sridevi

    Ok! Thanks for the replies. Pls let me allow to elaborate the earlier requirement.
    Trading Goods say A gets imported to India. Issue was :
    1) We need to issue Excise invoice only to few customers. So, we thought of treating one batch as excise batch and remaining as non excise batch per day.
    2) Stock price varies every day being batch wise produced in say Singapore.
    Means Mateiral is A but price varies evey day and because of the duty payment also gets varied. For a single material master we do have different prices for each batch and also excise/non excise scenario. So, how can I get material value for each of this combinations in the system and how to identify the same.
    Because of the above reasons, we thought of having two plants. I can not configure depot here because cleint requires single plant for each state as of now.
    Am I clear? If not, pls let me know,
    regards
    Sridevi

  • The Question about stock transfer between HU-Management and WM-Management

    Hi,
    There is a scenario about stock transfer between HU-Management and WM-Management storage location. I use transaction MB1B , movement type 313 , 315. After Good issue from WM-management storage location, outbound delivery will genarated, then Pack, Create/Confirm TO, at last post goods issue for the outboud delivery. But when i do movement type 315, there is a warning message "Data of preceding document was not transmitted", and from the F1 help i find this system reponse "You can maintain an indicator that makes information about preceding documents in this delivery available under delivery type in Customizing. For some characteristics of this indicator, the type of preceding document and the related document and item numbers must be transmitted to delivery creation. At least one of these parameters is missing.".
    So, My questions are:
    1. Generallily, Outbound delivery is created by SO, inbound delivery is created referenc PO, but how the stock transfer for 2 steps generate the outbould delivery and inbound delivery? Could you pls tell me the where i can config this in the IMG?
    2. What's "Data of preceding document was not transmitted" mean ? how to fix this issue ?
    Best Regards
    Boxer Du
    I am the SAP fans, focus on MM and WM. I am interesting TRM Yard Management and Cross Docking now.Very Gladly to talk you about these areas. I want to exchange the knowledge with you, and want to be a good friend of you. Pls contact me. You can find My MSN in the profile. Thanks.

    Hi,
    Sure, The inbound delivery type is set up in the IMG->Logistics General -> HU management -> Basics ->Delivery type -> Delivery type determination.
    For Inbound delivery type 'HID' is maintained in this view.
    Best Regards.
    Some One want to discuss the details , can contact me. Thanks.

  • Does table MCHB (batch stocks) contain both valuated and non valuated stock

    Hello
    Does table MCHB (batch stocks) contain both valuated and non valuated stock?
    Is it possible that material has both valuated and non valuated stock for the same plant and storage location?
    Thanks

    Hi ,
    Most of your queries has been answered by Jurgen.
    1)Does valuated or non valuated is linked with valuation type? yes ..if the material is valuated then only there is valuation type.It is used for split valuation .
    2)Where can I see whether material is valuated on plant or not?
    to check the valuation level IMG >Enterprise Structure>Definition>Logistics - General>Define valuation level
    and to check value and quantity updation at plant level check
    IMG >Logistics - General>Material Master>Basic Settings>Material Types-->Define Attributes of Material Types
    3)Case1
    I want material A to be valuated at the plant without split valuation
    Case
    I want material B to have 0 value at plant
    go as Jurgen has recommanded in the previous post . for material B used different material type which is not valuated at that plant .
    Regards,
    Anupam

  • Stock transfer between plants without STO and storage locations

    Hi.
    In case of stock transfer betwen storage locations with one step it is possible to do stock transfer between different stock types. But in Two step it is only possible to do stock transfer from unrestricted to unrestricted.
    In case of Stock transfer between Plants without STO in one and two step stock transfer, it is possible to do stock transfer  from unrestricted to unrestricted.
    Is there any reason for this?

    Hi
    Thanks for your reply. But i could not understand the sentence - But this is not possibles with 2 step procedure. becasue 2 step is recored will be maintained . In 2 step it not possible. Can you please eloborate on this
    Regards,
    Vivek Swarnapuri

  • How do I transfer ring tones between ipad and non-apple phone using bluetooth

    Can I transfer ring tones between ipad and non-apple phone using bluetooth?

    No. iOS devices do not support file transfers between non-iOS devices over Bluetooth.
    They probably wouldn't work anyway, as iOS ringtones have to be in a specific format.

  • Billing in Stock Transfer between two plants of two different company codes

    Hi Friends,
    I am doing the scenario of stock transfer between two plants of different  company codes.
    I have some issues in Billing for this..
    What are the settings do i need to to for Pricing in SD point of view.
    Ex:
    Supplying         /         Receiving
    Com.Code:2000     /        CompanyCode:1000
    Plant:2100              /         Plant:1100
    SA:2000/10/00      /          SA:1000/10/00
    I created Customer 5555 w.r.t sales area of supplying company code (2000/10/00)
    I created Vendor  7777 and assigned Supplying Plant 2100 in add purchasing data.
    In IMG Settings:
    Define Shipping Data for Plants: In Receving Plant i assigned customer 5555 and sales area blank
                                                        In Supplying Plant i assigned customer blank and sales area as 2000/10/00
    Create Checking Rule: Standard(B SD Delivery)
    Define Checking Rule: Standard(Avallability-01assigned to checking rule B)
    Assign Delivery Type and Checking rule: Document type(NB)-Supplying Plant(2100)-Delivery Type(NLCC)-Checking Rule-(B)
    Assign Doc Type:Supplying Plant(2100)-Receving Plant(1100)-Doc type(NB)
    What are Pricing settings in SD i have to do?????????
    Process:
    ME21N->VL10B->VL02N(PGI)->VF01(IV)->MIGO->MIRO
    I have gone through many threads in Forum but confusion in Pricing Part..
    Some are mixing with the inter company sales proces..
    Pls guide me..
    With Regards

    Do the following steps for STO Customizing:-
    1. Create a customer master record for the issuing plant.
    2. Create a vendor master record for the issuing plant, and enter customer account number in the Customer field on the Control screen.
    3. Repeat steps 1 and 2 for the receiving plant.
    4. Assign the plants to the customer master record in Customizing for Materials Management (MM), by choosing Purchasing <Purchase Order < Set Up Stock Transport Order< Plants.
    The Process Flow would be as follows :-
    Create a stock transport order, following the standard procedure, and send the order to the issuing plant.
    Issuing plant has processes your order, and when it is ready to ship,the storeperson at the issuing plant issues the goods using a transfer posting. The excise clerk there creates an excise invoice.The excise supervisor verifies and posts the excise invoice.It then sends the goods to you, together with the excise invoice.
    Once the goods arrive, you follow the standard procedure for incoming excise invoices:
    The excise clerk captures the excise invoice, using the stock transport order as the reference document. The storeperson enters the goods receipt, again using the stock transport order as the reference document.Alternatively, you can first enter the goods receipt and then capture the excise invoice.
    The excise supervisor then posts the excise invoice.
    Best Regards,
    Ankur

  • Stock transfer between the two manufacturing plants

    Dear Experts,
       I am doing the stock transfer between the 2 excisable plants
      1.First we will transfer the Semi finished material from one manufacturing plant to another manufacturing plants.
      2.After receiving the material in the receiving plant, they will convert SFG to FG.
      3.FG material will transfer to another non excisable plant.
    Is we need to pay the excise 2 times (1st time as a SFG material, 2nd time as a FG material)
    What is the exact procedure for this scenario.
    Regards,
    Narendra

    Respected Lakshmipathiji,
    i was little confused here...
    """Coming to your query, you need to levy tax on the selling price / assessabale value when sending the FG to non-excisable plant""""
    Tax means are you talking about sales tax?
    when we transfer the Finished goods from manufacturing plant to Non-manufacturing plant---Will it attracts Sales tax?
    Please throw some light here sir..
    Note to Narendra: this will be completely depends on your client--currently at my client they will transfer semi finished/Finished goods from one plant to another as sales cycle(attracts only excise values)--once after receival of stock--the receiving plant will raise PO to supply plant followed by MIGO and MIRO--there by the same excise values will be settled in MIRO settings(user will enter excise values manually in MIGO/MIRO to match the origin of stock transfer sales invoice)( i was not completely aware why they do so--may be need to get more clarity from my MM counterpart)
    Phanikumar

  • Open dataset in UTF8. Problems between Unicode and non Unicode

    Hello,
    I am currently testing the file transfer between unicode an non unicode systems.
    I transfered some japanese KNA1 data from non unicode system (Mandt,Name1, Name2,City) to a file with this option:
    set local language pi_langu.
      open dataset pe_file in text mode encoding utf-8 for output with byte-order mark.
    Now I want to read the file from a unicode system. The code looks like this:
    open dataset file in text mode encoding utf-8 for input skipping byte-order mark.
    The characters look fine but they are shifted. name1 is correct but now parts of the city characters are in name2....
    If I open the file in a non unicode system with the same coding the data is ok again!
    Is there a problem with spaces between unicode an non-unicode?!

    Hello again,
    after implementing and testing this method, we saw that the conversion is always taken place in the unicode system.
    For examble: we have a char(35) field in mdmp with several japanese signs..as soon as we transfer the data into the file and have a look at it the binary data the field is only 28 chars long. several spaces are missing...now if we open the file in our unicode system using the mentioned class the size is gaining to 35 characters
    on the other hand if we export data from unicode system using this method the size is shrinking from 35 chars to 28 so the mdmp system can interprete the data.
    as soon as all systems are on unicode this method is obselete/wrong because we don't want to cut off/add the spaces..it's not needed anymore..
    the better way would be to create a "real" UTF-8 file in our MDMP system. The question is, is there a method to add somehow the missing spaces in the mdmp system?
    so it works something like thtat:
          OPEN DATASET p_file FOR OUTPUT IN TEXT MODE ENCODING UTF-8 WITH BYTE-ORDER MARK.
    "MDMP (with ECC 6.0 by the way)
    if charsize = 1.
    *add missing spaces to the structure
    *transfer strucutre to file
    *UNICODE
    else.
    *just transfer struc to file -> no conversion needed anymore
    endif.
    I thought mybe somehow this could work with the class CL_ABAP_CONV_OUT_CE. But until now I had no luck...
    Normally I would think that if I'am creating a UTF-8 file this work is done automatically on the transfer command

  • Stock Transfer between company to company(company code to company code)

    Hi Experts,
    I have inventory status report on Inventory cube running fine in Production, i succesfully pulled ASN qty, stock trasnfer between plants, stock transfer between storage locations now i need to pull Stock transfer between Company to compnay (company code to company),Can any one share there experience.
    Thanks In advance
    Ram

    Hi,
    Stock transfer between plants in the same company code is Intra-company transfer and stock transfer between plants in different company code is inter-company transfer and an intercompany as well as customs invoice is generated in this instance.
    Refer the following link,
    http://help.sap.com/saphelp_46c/helpdata/en/fd/45bfe09d6411d189b60000e829fbbd/content.htm
    http://help.sap.com/bp_autov1600/Auto_JP/html/A62_EN_JP.htm
    Regards,
    Ravi.

  • Stock transfer between storage location in IS -Retail

    Hi,
    I want to have a Stock transfer order between two storage locations in the plant.
    I have activated the "Activate Stock Transfer Between Storage Locations", now i can create a STO and have the "Issuing SLoc" tab.
    Having that i get an error message "Not possible to determine shipping data for material XXX" Message no. 06280.
    I am trying to have the shipping data in customizing for set stock transfer  - "Define Shipping Data for Plants", but my site is not listed due to the use of IS Retail. Is there a way to configure it?
    Tnx
    Lior

    Hello Lior,
    in Retail your distribution center is a vendor and a customer, and your store is a customer. Therefore when you create master data for your distribution centre and store, you also create the vendor and customer masters that are required.
    By this link of the DC / Store to the customer master the shipping data is derived. I hope this answers your question.
    If you have further queries related to this, please do post them.
    Regards,
    Smitha

Maybe you are looking for