Stock transfer between plants- 1 plant with no excise & 1 plant with excise
Dear Sir,
We have 6 plants working under SAP version 6.0 and in all the plants excise is applicable i.e. modvat can be taken. Now a new plant say X is coming up under the same company code in which excise modvat won't be applicable. In this scenaripo when we will do stock transfer from existing plants excise will be applicable on the material sent to plant X but at the time of receiving the material at plant X this excise amount must be inventorised on material as modvat is not applicable in this plant. Similarly when we despatch the material from plant X to other existing plants material cost will be with excise value.
Pl. guide me that how this scenario to be configuered.
Thanks in advance.
Rajiv
Hi Rajiv
<b>Only you need to do is</b>
In plant X which is not registered with excise, there you have no need to maintain excise related data of material master record i mean in J1id. So this will post your exsice amount to your inventory cost.
Secondly if material is sent from Plant X to excisable plant this plant X can not levi excise duty as its not regeisetered one.
Regards
Vivek
-- Reward if helful !!
Similar Messages
-
Billing in Stock Transfer between two plants of two different company codes
Hi Friends,
I am doing the scenario of stock transfer between two plants of different company codes.
I have some issues in Billing for this..
What are the settings do i need to to for Pricing in SD point of view.
Ex:
Supplying / Receiving
Com.Code:2000 / CompanyCode:1000
Plant:2100 / Plant:1100
SA:2000/10/00 / SA:1000/10/00
I created Customer 5555 w.r.t sales area of supplying company code (2000/10/00)
I created Vendor 7777 and assigned Supplying Plant 2100 in add purchasing data.
In IMG Settings:
Define Shipping Data for Plants: In Receving Plant i assigned customer 5555 and sales area blank
In Supplying Plant i assigned customer blank and sales area as 2000/10/00
Create Checking Rule: Standard(B SD Delivery)
Define Checking Rule: Standard(Avallability-01assigned to checking rule B)
Assign Delivery Type and Checking rule: Document type(NB)-Supplying Plant(2100)-Delivery Type(NLCC)-Checking Rule-(B)
Assign Doc Type:Supplying Plant(2100)-Receving Plant(1100)-Doc type(NB)
What are Pricing settings in SD i have to do?????????
Process:
ME21N->VL10B->VL02N(PGI)->VF01(IV)->MIGO->MIRO
I have gone through many threads in Forum but confusion in Pricing Part..
Some are mixing with the inter company sales proces..
Pls guide me..
With RegardsDo the following steps for STO Customizing:-
1. Create a customer master record for the issuing plant.
2. Create a vendor master record for the issuing plant, and enter customer account number in the Customer field on the Control screen.
3. Repeat steps 1 and 2 for the receiving plant.
4. Assign the plants to the customer master record in Customizing for Materials Management (MM), by choosing Purchasing <Purchase Order < Set Up Stock Transport Order< Plants.
The Process Flow would be as follows :-
Create a stock transport order, following the standard procedure, and send the order to the issuing plant.
Issuing plant has processes your order, and when it is ready to ship,the storeperson at the issuing plant issues the goods using a transfer posting. The excise clerk there creates an excise invoice.The excise supervisor verifies and posts the excise invoice.It then sends the goods to you, together with the excise invoice.
Once the goods arrive, you follow the standard procedure for incoming excise invoices:
The excise clerk captures the excise invoice, using the stock transport order as the reference document. The storeperson enters the goods receipt, again using the stock transport order as the reference document.Alternatively, you can first enter the goods receipt and then capture the excise invoice.
The excise supervisor then posts the excise invoice.
Best Regards,
Ankur -
Stock transfer between Plant/Storage location to Plant/Storage location
Dear Experts,
This is a MM component of SAP Retail.
We have 4 brands ( Plants of type B, Plants of type C etc) that needs inventory from the same Distribution center (Plant A) for some common products. Here the direction is to prioritize the inventory per brand. The requirement is one brand should not take the inventory of the other brand.
To overcome this problem , the solution proposed is to have different storage location for different brands in the same DC.
When we run replenishment planning for the brands and do a ATP check, the availability check should consider only the one issuing storage location in the DC which we allocated for the brand.
I do see the following set up in SPRO and I have done the following.
Step1: Activate Stock Transfer between Storage Locations SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> u2018Activate Stock transfer between storage locationsu2019
Step2: Assign Delivery Type and checking rule according to storage
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations->Assign Delivery Type and Checking Rule According to Storage
Step3: Define Shipping Data for Stock Transfer between Storage Locations
SPRO ->Material Management ->Purchasing ->Purchase Order ->set up stock transport order ->set up stock transport order between storage locations -> Define Shipping Data for Stock Transfers between Storage Locations
Step4: Define Rule for Determination off Shipping Point SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations -> Set-up Storage-Location u2013dependent shipping point determination->Define rule for determination of shipping point
Step5: Shipping Point Assignment According to Storage Location
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> Set-up Storage-Location u2013dependent shipping point determination-> Assign Shipping Points According to Storage Location
Question.No:1- After completing the above set up in me21n, the issuing storage location field is greyed out. I am not able to enter any value here. Can you please help.
Question.No:2
I do see the following setting.
Under IMG ---> Material Management ---> Purchasing --> Purchase Order --> Set up Stock Transport Order -->Business Add-In for Determination of Issuing Storage Location
Display the IMPLEMENTATION
Double click on the method GET_SUPPLYING_SL
Click the Execute button
Click the detail button on IF_EX_MD_EXT_SUP
Execute GET_SUPPLYING_SL
There is a prerequisite for this BADI .I have done those things.What i dont understand is where to force the combination of supplying site/issuing stor.loc/receiving site/receiving stor.loc
Kindly provide your inputs.
Thanks,
VasanthanDear,
Have You configure MRP in second plant (where you want to transport the Material).
Please try with this and do again Po for stock transport.
Regards
Piyush Patel -
Stock Transfer between plants two steps.
DearAll,
We are using the scenario stock transfer between plants two steps.in the source plant we are issueing the goods with on 303 movement in MIGO with Remove from storage option. in the receiving plant we are receiving the goods with refernce to 303 material document in MIGO with place in storage option.
we are using the version SAP 4.7.
my problem is at the time of goods receipt SAP is allowing to the posting date less than the source plant 303 document date. it should allow the posting date as Greater than equal to source plant document date at the time of GR.
Any standard pracktise is there.
for example source plant 303 document date is 08.06.2009 wrongly i have entered the receiving plant 305 document posting date as 06.06.2009 it is allowing to post it is not throw any information. it should not allow to know.
i want to control this. any standard controls is there. kindly help.
Regards
P.Anandhakumar
Edited by: Anandhakumar Palanisamy on Jun 9, 2009 10:46 AMExcept user exit , Is it possible any standard functionality.?
why SAP not controlled this?.
this is SAP bug or not?. kindly clarify..
Regards
P.Anandhakumar.... -
What is Cycle or steps to create Stock transfer between plants.
What is Cycle or steps to create Stock transfer between plants.
Reply with T Codes & JustifyHello RM
We can transfer stocks within a company code between 2 plants using 3 methods:
1) Using single step simple stock transfer (Mvt Type 301).
2) Using two step stock transfer (Mvt Types 303 and then 305).
3) Using a stock transport order(STO) again it is based on 2 things:
a) r u using STO with delivery or
b) without delivery.
Though the first two steps are very simple to process but using STO has its own advantages: 1) Quantity in transit can be monitored 2) delivery costs can be entered in the STO.
First 2 steps (single step and 2 step plant to plant transfer) can be done using MIGO tcode , selecting stock transfer and entering the relevant mvt types.
would like to tell you about STO as it is an important process.
STO without delivery, the following functions are provided to support the Internal Stock Transfer without Delivery :
#Create Stock Transport Order
#Post goods issue for stock transport order
#Post goods receipt for stock transport order
Config Step required before processing above steps:
Setting Up Stock Transport Order: Purchasing Document Type, the purpose of this activity is to specify which document type is to be used for a certain combination of supplying (issuing) plant and receiving plant.
Path go to SPRO--MM-Purchasing---PO-Set up STO-----assign doc type, one step procedure, underdelivery tolerances.
There you have to enter your supplying and receving plant with the Purchasing doc type( UB).
Now the process:
1) Receiving plant will create a STO towards issuing plant.
2) Issuing plant will transfer material from their unrestricted use stock to stokc in transit using mvt type 351.
3) Receiving plant receives the goods using MIGO mvt type 101.
Regards
Yogesh -
Stock transfer between plants without STO and storage locations
Hi.
In case of stock transfer betwen storage locations with one step it is possible to do stock transfer between different stock types. But in Two step it is only possible to do stock transfer from unrestricted to unrestricted.
In case of Stock transfer between Plants without STO in one and two step stock transfer, it is possible to do stock transfer from unrestricted to unrestricted.
Is there any reason for this?Hi
Thanks for your reply. But i could not understand the sentence - But this is not possibles with 2 step procedure. becasue 2 step is recored will be maintained . In 2 step it not possible. Can you please eloborate on this
Regards,
Vivek Swarnapuri -
Stock transfer between plants for split valuated materials
Hi,
I'm doing a stock transfer between plants without STO.
The FG's are split valuated,which are transferred from central warehouse to other warehouse at different states.
I'm trying to use mvt type 303 and 305 to transfer the FG.
But getting error "Use one-step procedure for transfer posting to mat. subj. to valuation".
Please suggest how to achieve the requirement.
Is it possible to make 303 mvt type document to be parked and posted.
Regards,
Venkatesh<< Moderator message - Cut and paste response from Error when doing two step transfer between Plants with split valuation removed and points unassigned. Plagiarism is not allowed in SCN >>
Refer below link with same issue discussed,
[two step transfer with split valuation |Canu00B4t use two step transfer with split valuation ?]
Edited by: Rob Burbank on Feb 3, 2012 11:30 AM -
Stock transfer between the two manufacturing plants
Dear Experts,
I am doing the stock transfer between the 2 excisable plants
1.First we will transfer the Semi finished material from one manufacturing plant to another manufacturing plants.
2.After receiving the material in the receiving plant, they will convert SFG to FG.
3.FG material will transfer to another non excisable plant.
Is we need to pay the excise 2 times (1st time as a SFG material, 2nd time as a FG material)
What is the exact procedure for this scenario.
Regards,
NarendraRespected Lakshmipathiji,
i was little confused here...
"""Coming to your query, you need to levy tax on the selling price / assessabale value when sending the FG to non-excisable plant""""
Tax means are you talking about sales tax?
when we transfer the Finished goods from manufacturing plant to Non-manufacturing plant---Will it attracts Sales tax?
Please throw some light here sir..
Note to Narendra: this will be completely depends on your client--currently at my client they will transfer semi finished/Finished goods from one plant to another as sales cycle(attracts only excise values)--once after receival of stock--the receiving plant will raise PO to supply plant followed by MIGO and MIRO--there by the same excise values will be settled in MIRO settings(user will enter excise values manually in MIGO/MIRO to match the origin of stock transfer sales invoice)( i was not completely aware why they do so--may be need to get more clarity from my MM counterpart)
Phanikumar -
Stock Transfer Between two plants within same company code
Hello,
We are using scenario-'Stock transfer between two plants within same company code. Scenaro is like Plant A is receving plant and Plant B is delivering Plant.
Plant A release PO for 100 nos to Plant B
Plant B issues 100 nos (via delivery) to Plant A
But Plant A receives only 50 nos physically so they do Goods receipt for 50 nos , but document got generated for 100 nos (when plant B issues material).
Now Plant A do not want to receive remaining 50 nos physically, but wants to reduce material document which got created when goods issue posted by plant B
Now stock in transis (mb5t) is 50 nos.
How to reduce this material document. or any another alternative solution for this?
Thanks,
ShaileshHi There
Reversal of partial is not possible ,
But you can use the Mov Type 557 and 558 to do the adjustments in Stock in transit qty
Few more details on STO adjustments
Hi There
it can be settle in many ways,,,
1. Receive the goods as 100 and Scrap the 50 nos from the received plant,,- If the receiving plant is responsible
2.Revert the PGI/Transfer movement(Vl09) and send the 50 nos again from the supplying plant- of the Supplying plant is responsible,
3.Also we have the movement type 557 and 558 without doing the above two steps you can correct the qty from stock in transit itself,,
4. also you can check the below similar thread
STO - material lost during tranfer from plant A to plant B
5. If above are not ok, then receive the goods as 100, And raise the STO as your plant as supplying plant and receiving plant is (Supplied 50 nos less) plant,, Do the process without sending the material.. in this way that 50 nos can be adjusted,,
6.Here is some more details
557 Issue from stock in transit (adjustment posting)
Only use this movement type (also the reversal movement type) under the following circumstances:
Using movement type 557, you can correct purchase-order-independent stock in transit if
- a good receipt cannot be posted to a purchase order without stock in transit, even though there is still stock in transit according to the purchase order history
- stock in transit still exists, even though there are no open stock transfer orders for the particular material
This movement type may ONLY be used in the cases mentioned above after careful analysis, to correct stock in transit that has rounding errors.
This movement type may not be copied.
Note!
Before using this movement type, note the following:
- 392205 Analysis stock in transit / Correction if split valuation
Possible special stock indicators:
E, Q
7. As previous post says if you have the note for this issue you can use that also
You can use any one of the way to solve the issue, Hope it helps
Cheers
Senthil P -
Stock transfer between stor loc. of same plant triggered by Sales Order
Hello everyone
I need some input regarding triggerring Stock Transfer between 2 storage locations of the plant from a Sales Order.
Sales Org: ABCD
Plant: WXYZ
Stor Location: 0001 & 0002
Now here 0001 is the Picking location for the Delivery Document.
However 0002 is where all the stock is stacked.
Physically they both are different buildings in the same vicinity.
The Business wants the Sales Order to trigger the stock movement from 0002 to 0001 on a daily basis.
So from a end user prospective, they will move the stock from 0002 to 0001 for all the items needed to fulfill the Orders due for Shipment for that day.
What options do I have for this ?
Thanks
VinWell actually the Selling Org ABCD is of a different Company code .. it is a typical case of Intercompany Sales .. where the Plant WXYZ is belonging to another company code.
I have setup the Intercompany Sales Process .. and want to trigger the Stock movement as mentioned above.
I have configured the STO for storage location - stor. location in a Plant. ...
However I am struggling to trigger a STO from a Sales Order.
I tried using the Schedule Lines to trigger a Pur. Req ... however the Supplying Plant field remains blank (which is the same in this case as it is a stock movement between 2 locations of the same plant).
The flow looks somewhat like this
Sales Order -
> Stock Transfer PR in Plant WXYZ -
> Delivery Doc for the STO --- > MIGO to receipt the inventory in 0001 -
> Delivery DOc for Sales Order -
> Invoice for end customer --- > Intercompany Invoice
If anyone has automated creation of a STO from a Sales Order .. please advice
Thanks
Vin -
Stock transfer between Excise Plant and Non Excise Plant
Scenario : Stock is imported from say Singapore. One of the import duties can be claimed back as CVD and pass the benefit to customer.
Requirement : Stock transfer between Excise Plant and Non Excise Plant
Question : i) If I do stock transfer from Excise plant to non-excise plant, can I transfer the CVD amount which I captured in RG23A - Part1/Part 2?
ii) If I do stock transfer from Non- Excise plant to Excise plant, can I get the benefit of CVD and pass on that benefit to customer?
Pls let me know the possiblity of above two in SAP and Legally?
thanks in advance
SrideviOk! Thanks for the replies. Pls let me allow to elaborate the earlier requirement.
Trading Goods say A gets imported to India. Issue was :
1) We need to issue Excise invoice only to few customers. So, we thought of treating one batch as excise batch and remaining as non excise batch per day.
2) Stock price varies every day being batch wise produced in say Singapore.
Means Mateiral is A but price varies evey day and because of the duty payment also gets varied. For a single material master we do have different prices for each batch and also excise/non excise scenario. So, how can I get material value for each of this combinations in the system and how to identify the same.
Because of the above reasons, we thought of having two plants. I can not configure depot here because cleint requires single plant for each state as of now.
Am I clear? If not, pls let me know,
regards
Sridevi -
Stock Transfer between Storage Location with Order
Dear MM experts,
I am into SAP SD.
Our client wants to Transfer Stock from one Storage Location to another Storage Location of the same Plant. (This can be easily done thru MB1B via Transfer Posting)
But the unique requirement here is they require some kind of Delivery Order or Tansfer Order to be created first & only based on that document user can transfer Stock between Storage Locations of a same Plant. (Similar to Inter-Plant Stock Transfer where we create Stock Transfer PO & then move goods between plants).
Can you please suggest on how to achieve the above scenario.
Thanks,
Jignesh Mehta
Mumbaihi
Stock Transfer between Storage Locations
u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
u2022 As a result of which user can input issuing storage location with supplying plant.
u2022 Facility of using different delivery types for different issuing storage locations is available.
u2022 Shipping Point data can also be determined based on the issuing storage location.
refer following
http://sapfunctional.com/MM/StockTransfer/Configure.htm
http://help.sap.com/saphelp_scm41/helpdata/EN/23/29cf20eabe094e957763a46aa5be9d/content.htm
regards
kunal -
Stock transfer between company codes
Dear Experts,
I am doing stock transfer between two different company codes. Purchasing order type wil be NB & SD delivery type will be : NLCC
i have done all w.r.t configuration requirement for between company code, when i go for ME21N, unable to get purchasing order type NB but its showing only UB & item category U. systme giving message like : item category U & pur order type is UB would like to proceed. But it would be for between plants within same company code.
Please assist me where i am doing wrong...
Best Regards
Badari
Edited by: badaripro on Feb 23, 2010 7:15 PM
Edited by: badaripro on Feb 23, 2010 7:15 PMDear Badari,
I don't understand. Do you say that you just start ME21N and can only choose order type UB there? In this case it has nothing to do with the question if the STO is cross-company or not, since the system doesn't know the plants yet.
I would assume somebody just deleted the document type NB in your customising or you are not authorised to use it - please start ME21N again, observe the error (can't choose NB), leave the trs and run trs SU53 to check your authorisations.
BR
Raf -
GATP Stock transfer between two sublocations
Hello,
Is it possible to use Rules Based ATP to create an Stock Transfer between two sublocations in the same plant?
The source sublocation (Storage Location) is assigned to a Storage Location MRP Area
In the Rules we have defined a Location determination procedure that if it does not find ATP quantities in the main location it searches in the Storage Location MRP Area (Location Type 1077). The idea behind this rule is to treat the Storage Location MRP Area as a diferent location, but it does not works.
I thank in advance for your kind cooperation.Hi Loknath / Verma,
The STR is between a Production Location an a MRP Area Location.
I have created the rule, but no STR are created. It does something very strange instead of what is expected.
For example,
I have 2 storage locations in PLANT1:
- STL1 has 100 units of product 1
- STL2 has 200 units of product 1. This SL is assigned to an MRP area
In APO the No check on sublocation level check is unchecked.
I have cifed production location and the MRP area so two locations are created: one is type 1001 and the other is type 1007.
I have defined a Rule, so if there is not enough ATP cuantities in PLANT1 (Type 1001) it should search in the MRP Area (type 1007)
If I have a sales order that asks for 150 units, rule is trigered.
First thing that is very strange: when I see the Storage location substitution list, I cannot see the MRP Area. What I see is the production location.
The other problem is when i look at the ATP quantities during ATO verification, they do not match with the ones I can see in RRP3.
Anyway, I have taken a look at the link that Verma sent me, and I understand that if I use RBATP to create STR between storage locations, sub positions are created, and there is a requirement in our project that no subpositions should be created. So, even if I can make it work, I cannot used... Seems that I may investigate the problem in my spare time.
Thanks a lot for your help. -
Stock transfer between one company code to another
How to configure stock transfer between one company code to another.
Please send me the step by step procedure ASAP.Hi
check following steps
1. Create Customer in Supplying Plant.
2. Create Vendor in Receiving Plant (In Purchasing View, Menu-Extras-Add Purchasing Data)
3. IMG-MM-Purchasing-PO-Setup STO-Define Shipping data for Plants (Assg Cust No in Receiving Plant)
4. IMG-MM-Purchasing-PO-Setup STO-Assgn Doc Typ, One-Step Proc Und Del Tol
5.IMG-Log.Execution-Shipping-Basic Shipp Func-Shipp Pt & Goods Recei Pt Det
http://help.sap.com/saphelp_erp2005vp/helpdata/en/4d/4b9036dfe4b703e10000009b38f889/frameset.htm
also give ur mail ID will send doc
Vishal...
reward if usefull -
Stock Transfer between company to company(company code to company code)
Hi Experts,
I have inventory status report on Inventory cube running fine in Production, i succesfully pulled ASN qty, stock trasnfer between plants, stock transfer between storage locations now i need to pull Stock transfer between Company to compnay (company code to company),Can any one share there experience.
Thanks In advance
RamHi,
Stock transfer between plants in the same company code is Intra-company transfer and stock transfer between plants in different company code is inter-company transfer and an intercompany as well as customs invoice is generated in this instance.
Refer the following link,
http://help.sap.com/saphelp_46c/helpdata/en/fd/45bfe09d6411d189b60000e829fbbd/content.htm
http://help.sap.com/bp_autov1600/Auto_JP/html/A62_EN_JP.htm
Regards,
Ravi.
Maybe you are looking for
-
Need new Mac DESPERATELY, but don't want to "overbuy"
I'm in desperate need of a new Mac (as you can probably see from my specs) but I have NO clue what to buy. I'm not a gamer, so I don't need the best video money can buy, but I would like to try out things such as Second Life. I mostly use my Mac for
-
Tax calculation in Sales order
Hi, I wanted to check how sales tax was calculated on a Sales order for a US customer in CRM. taxware is used for tax calculation. I went to item level, conditions tab, selected the condition type, "state tax" and clicked on "accesses" button. The sy
-
Problem with FM:DB_SELECT GENERIC TABLE in 6.0
Hi Experts, There is one report, which is copyed from 4.6 to ECC 6.0. Now my problem is inside the report one FM: DB_SELECT GENERIC TABLE is called. This FM is working properly in 4.6. But it is not working in 6.0 I mean this FM is not fetching the d
-
Canon EOS 6D - Black & White photos
Hello, With my current camera (Canon Powershot IS 50) I can do black & white photos but tell the camera which colour should remain (so for example I can do pics where all the photo is black & white but the red colours stay red, etc.) I would like to
-
One of my playlists is marked "ineligible" because it supposedly contains items that are not music. I went through the playlist and unchecked anything of the sort, and it still says it's ineligible. Is there another way to fix this?