Stock transfer between plants for split valuated materials

Hi,
I'm doing a stock transfer between plants without STO.
The FG's are split valuated,which are transferred from central warehouse to other warehouse at different states.
I'm trying to use mvt type 303 and 305 to transfer the FG.
But getting error "Use one-step procedure for transfer posting to mat. subj. to valuation".
Please suggest how to achieve the requirement.
Is it possible to make 303 mvt type document to be parked and posted.
Regards,
Venkatesh

<< Moderator message - Cut and paste response from Error when doing two step transfer between Plants with split valuation removed and points unassigned. Plagiarism is not allowed in SCN >>
Refer below link with same issue discussed,
[two step transfer with split valuation |Canu00B4t use two step transfer with split valuation ?]
Edited by: Rob Burbank on Feb 3, 2012 11:30 AM

Similar Messages

  • Error when doing two step transfer between Plants with split valuation

    Hi expert,
    I´ve activated split valuation for Material X , it has three Valuation types ( NEW, REPAIR and DAMAGE ) . The problem arose when i tried to do a two step transfer between plants ( mov 303 ) and i got the following error msg :
    Use one-step procedure for transfer posting to mat. subj. to valuation
    Message no. M7048
    Diagnosis
    In the receiving plant, the material is subject to split valuation. For this material, a stock transfer cannot be carried out using the two-step procedure.
    Procedure
    Use the one-step procedure (movement type 301) or a stock transfer order for the stock transfer.
    The message is very clear itself , but... i just wonder if there`s actually any way to avoid this, I tried to change the error msg into a warning but couldn´t find it in customizing. Thanks for any comments on this !

    Hi,
    What do you mean with "inconcistent to my storage type definition?", is that mean i can process two step transfer without using PO/delivery process or one-step movement? coz according to business requirement, we must use two step transfer considering to the distance between plants is so far and we want to make it the simple way so that PO/Delivery process isn't better solution. I think, this is an standard procedure all company over the world can use but just the reason of split valuation the system can't execute the transaction.
    Is there any config i miss to? is there any user exit i can use for this requirement? please help me..
    thanks,
    AJ

  • Stock Transfer between plants two steps.

    DearAll,
                 We are using the scenario stock transfer between plants two steps.in the source plant we are issueing the goods  with on 303 movement in MIGO with Remove from storage option. in the receiving plant we are receiving the goods with refernce to 303 material document in MIGO with place in storage option.
              we are using the version SAP 4.7.
    my problem is at the time of goods receipt SAP is allowing to the posting date less than the source plant 303 document date. it should allow the posting date as Greater than equal to source plant document date at the time of GR.
    Any standard pracktise is there.
    for example  source plant 303 document date is 08.06.2009 wrongly i have entered the receiving plant 305 document posting date as 06.06.2009 it is allowing to post it is not throw any information. it should not allow to know.
    i want to control this. any standard controls is there. kindly help.
    Regards
    P.Anandhakumar
    Edited by: Anandhakumar Palanisamy on Jun 9, 2009 10:46 AM

    Except user exit , Is it possible any standard functionality.?
    why SAP not controlled this?.
    this is SAP bug or not?. kindly clarify..
    Regards
    P.Anandhakumar....

  • What is Cycle or steps to create Stock transfer between plants.

    What is Cycle or steps to create Stock transfer between plants.
    Reply with T Codes & Justify

    Hello RM
    We can transfer stocks within a company code between 2 plants using 3 methods:
    1) Using single step simple stock transfer (Mvt Type 301).
    2) Using two step stock transfer (Mvt Types 303 and then 305).
    3) Using a stock transport order(STO) again it is based on 2 things:
    a) r u using STO with delivery or
    b) without delivery.
    Though the first two steps are very simple to process but using STO has its own advantages: 1) Quantity in transit can be monitored 2) delivery costs can be entered in the STO.
    First 2 steps (single step and 2 step plant to plant transfer) can be done using MIGO tcode , selecting stock transfer and entering the relevant mvt types.
    would like to tell you about STO as it is an important process.
    STO without delivery, the following functions are provided to support the Internal Stock Transfer without Delivery :
    #Create Stock Transport Order
    #Post goods issue for stock transport order
    #Post goods receipt for stock transport order
    Config Step required before processing above steps:
    Setting Up Stock Transport Order: Purchasing Document Type, the purpose of this activity is to specify which document type is to be used for a certain combination of supplying (issuing) plant and receiving plant.
    Path go to SPRO--MM-Purchasing---PO-Set up STO-----assign doc type, one step procedure, underdelivery tolerances.
    There you have to enter your supplying and receving plant with the Purchasing doc type( UB).
    Now the process:
    1) Receiving plant will create a STO towards issuing plant.
    2) Issuing plant will transfer material from their unrestricted use stock to stokc in transit using mvt type 351.
    3) Receiving plant receives the goods using MIGO mvt type 101.
    Regards
    Yogesh

  • Stock transfer between plants without STO and storage locations

    Hi.
    In case of stock transfer betwen storage locations with one step it is possible to do stock transfer between different stock types. But in Two step it is only possible to do stock transfer from unrestricted to unrestricted.
    In case of Stock transfer between Plants without STO in one and two step stock transfer, it is possible to do stock transfer  from unrestricted to unrestricted.
    Is there any reason for this?

    Hi
    Thanks for your reply. But i could not understand the sentence - But this is not possibles with 2 step procedure. becasue 2 step is recored will be maintained . In 2 step it not possible. Can you please eloborate on this
    Regards,
    Vivek Swarnapuri

  • Inforecord for Split valuated materials

    Hi all,
    How can i maintain different prices for split valuated materials
    For Eg.  I have a material split valuated based on its Quality vendor supplies two diff quality materials with different prices
    how to maintain the prices in inforecords or any alternative to maintain both the prices.
    With regards,
    Krishna

    hi..
    Split valuation is for Valuation Purpose only...
    SAP does not support....Procuring same material with Diff. Split Valuation Type from Single Vendor is not allowed by SAP standard..
    You cannot Maintain Purchase Info for Material which is having 2 Split Valuation type......with One Vendor......
    Because For One vendor and One material combination, you can maintain One split valuation type only....
    Hope it works..
    Thanks..

  • Stock transfer between Plant/Storage location to Plant/Storage location

    Dear Experts,
    This is a MM component of SAP Retail.
    We have 4 brands ( Plants of type B, Plants of type C etc) that needs inventory from the same Distribution center (Plant A) for some common products. Here the direction is to prioritize the inventory per brand. The requirement is one brand should not take the inventory of the other brand.
    To overcome this problem , the solution proposed is to have different storage location for different brands in the same DC.
    When we run replenishment  planning for the brands and do a ATP check, the availability check should consider only the one issuing storage location in the DC which we allocated for the brand.
    I do see the following set up in SPRO and I have done the following.
    Step1: Activate Stock Transfer between Storage Locations
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> u2018Activate Stock transfer between storage locationsu2019
    Step2: Assign Delivery Type and checking rule according to storage
    SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations->Assign Delivery Type and Checking Rule According to Storage
    Step3: Define Shipping Data for Stock Transfer between Storage Locations
    SPRO ->Material Management ->Purchasing ->Purchase Order ->set up stock transport order ->set up stock transport order between storage locations -> Define Shipping Data for Stock Transfers between Storage Locations

    Step4: Define Rule for Determination off Shipping Point
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations -> Set-up Storage-Location u2013dependent shipping point determination->Define rule for determination of shipping point
    Step5: Shipping Point Assignment According to Storage Location
    SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> Set-up Storage-Location u2013dependent shipping point determination-> Assign Shipping Points According to Storage Location
    Question.No:1- After completing the above set up  in me21n, the issuing storage location field is greyed out. I am not able to enter any value here. Can you please help.
    Question.No:2
    I do see the following setting.
    Under IMG ---> Material Management ---> Purchasing --> Purchase Order --> Set up Stock Transport Order -->Business Add-In for Determination of Issuing Storage Location
    Display the IMPLEMENTATION
    Double click on the method GET_SUPPLYING_SL
    Click the Execute button
    Click the detail button on IF_EX_MD_EXT_SUP
    Execute GET_SUPPLYING_SL
    There is a prerequisite for this BADI .I have done those things.What i dont understand is where to force the combination of supplying site/issuing stor.loc/receiving site/receiving stor.loc
    Kindly provide your inputs.
    Thanks,
    Vasanthan

    Dear,
    Have You configure MRP in second plant (where you want to transport the Material).
    Please try with this and do again Po for stock transport.
    Regards
    Piyush Patel

  • Plants abroad: Customizing for stock transfer between plants, EC Sales list

    Hello,
    Please advice how the customizing for tax codes (output and input tax) should be done in order to get the SJ documents (stock transfer proformas) listed correctly in EC Sales list. Now the SJ documents are listed correctly in VAT report (S_ALR_87012357) but are not listed at all in EC Sales list (S_ALR_87012400) - and the correct situation is when they are listed in both reports (the amounts should correspond with each other). The main question is how to set up correctly the EU code (values 1, 3 or 9) in the tax code settings for three tax codes below:
    1. output tax of departure country
    2. output tax of recipient country (destination ctry) and
    3. input tax of recipient country
    Pls note that 2 and 3 together form the acquisition tax of the destination country.
    Above three tax codes are now listed in VAT report but not listed in EC Sales list for departure country at all. SJ document should be listed in EC Sales list using the reporting country = departure country.
    Any valuable advices warmly welcomed,
    Kind regards,
    Slawek

    Dear Kumar
    Please check the links
    [Plants Abroad|http://help.sap.com/saphelp_46c/helpdata/en/e5/077f984acd11d182b90000e829fbfe/frameset.htm]
    [Plants abroad: Sales-specific settings |http://help.sap.com/saphelp_46c/helpdata/en/34/60b19dae724effe10000009b38f91f/frameset.htm]
    thanks
    G. Lakshmipathi

  • Stock transfer between plants in a company with different price

    Hi, expert,
    i want to transfer materials between plants inside a company with different price which set by supply plant randomly, not the valuation price, how can i achieve this?
    Thxs & best wishes,
    David

    Hi,
    In short, you cannot.
    Within SAP you cannot make a profit or loss by transferring an item between two Plants within the same company code.
    This is not necessarily an SAP restriction as such, it is due to basic accounting rules.
    The company code is seen as the legal entity for accounting and so if a movement within that company resulted in a loss or profit then this would break the rules.
    I am not saying that it is impossible to set it up this way (nothing is impossible) but I personally recommend that you find another way of achieving this. Trying to modify the system to break such an important rule will definitely cause problems.
    In previous implementations I have used the following option.
    Simple use basic STOs that transfer the items at the material valuation price. But then at the end of each month produce a report that shows what materials have been transferred between the relevant plants and at THAT stage make a financial posting to reflect the "benefit" that has been realised (based on prices held in a new table, that represent the price that would have been charged).
    It does appear to be a failing of the SAP system but it really isn't. What it normally indicates is that somehow the wrong org structure may have been built and perhaps the two plant should really be attached to separate company codes (especially if you need to show "profits and loss" in this way)?
    Steve B

  • Stock transfer between plants - availability check

    Hi  all,
    We are currently facing a scenario, where a Stock transfer Purchase order is created for goods movement between two plants. The outbound delivery was created, but at the time of goods issue, there was a problem of inadequate stock on hand.
    I wanted to know whether an availability check happens during an outbound delivery creation. (O/B del type : UL).
    If not, then where does SAP check whether there is adequate stock available for the goods movement.
    Please respond asap.
    Regards,
    Krishna

    Hi
    Availability check happen at both STO & delievry levels
    in the STO level & deliverylevel system will chec`k the availabilty maintained against the document type in the below path
    SPROIMG-Material managementPurchasingPurchase orderSet up stock transport order-Assign delivery type  and checking rule
    At the delivery  item category level there is afield  called availability check(AvailCkOf)  check availability path as below
    SPROIMG-Logistics executionShippingDeliveries--_define item categories for deliveries
    if you have any further clarifications let me know
    Reagrds
    Damu

  • Stock transfer between plants - Material used is Asset material

    Hi All,
    We are using TAXINJ.
    We are doing stock transfer of an asset material from Plant A to Plant B.
    Proceedure followed as below:
    Supplying Plant -
    STO PO - ME21N
    Outbound Delivery -  VL10B
    PGI - VL02N
    Billing - VF01
    Invoice DOc - J1IIN
    Receiving Plant-
    Goods reciept - MIGO
    Capture excise thru - J1IEX
    When capturing excise ETT is GRPO and the subtransaction type used is 01
    We are getting the below message:
    "No Cenvat amount to be posted"
    "No Cenvat Amount to be reversed"
    We are not getting any message when we are not using subtransaction type 01, and we are able to post part2 entries.
    Pls suggest.
    Thanks in advance
    Pavan.

    Hi Deivakaniraja,
    Thank you for your suggestion.
    Still have a querry....
    The subtransaction type that is defined is not conventional.
    We define various subtransaction type like 01, 02, 03, 04, but there is no standard that 01 to be used only for subcontracting.
    I understand that IP is defined only for Import postings.
    Can you pls brief me.
    Thank You in advance.
    Regards
    Pavan

  • Stock transfer between plants two steps 303-305

    Dear All,
                    We are using version SAP 4.7 we are using stock transfer scenarion between plants two steps. 303-305 source plant they will remove the stock  with 303 movement in the receiving plant they will receive the goods against the 303 document number.
    at the time with 305 movement type one document generated in that document table MKPF 303 reference number should be updated but in the 305 document the reference document 303 not updated in table MKPF.
    why?...any updations required. because i want to develop an user exit at the time of Goods receipt with 305 movement in the receiving plant now it is allowing posting date as <= 303 document posting date it should be allow only >=303 document posting date at the time of 305 document generation in the receiving plant.
    in MKPF table the reference document is not updating ....any ideas....
    im using the standard Enhancement :MBCF0002
    EXIT_SAPMM07M_001.
    Regards
    Anand..

    Hi..
        then how can control.
    receiving plant 305 document posting date is should be greater than or equal to source plant 303 document posting date how can achieve this?.
    via user exit in the reciving plant 305 document the reference document not updated. how to achieve this?...
    any ideas..
    Regards
    P.Anandhakumar

  • Vendor Consignment for Split Valuated Materials

    Dear All,
    We have a scenario where in our material is split valuated,we have 2 valuation type import and Domestic, both the valuation type is being supplied by a single distributor, the price of the import valuation type is different from the price of domestic valuation type.
    We are trying to configure consiginment process for split valuted material.While maintianing consignment info record, we are not able to maintian separate info record for import and domestic valuation type (since material /vendor/plant/purchase organization are same).Hence while doing goods issue using 201 K, the system is taking the price from the info record.Is there any solution available, to post the  goods issue for import valuation type at a different price and domestic valuation type at different price.
    Thanks,
    Vairavan.

    How system will pick the info record price for movement type 201 K ?
    As of my knowledge, system will create accounting entry as per the material price (MM03 - Accounting 1 view for the valuation type)
    It may create problem for 411 K movement type, but not for movement type 201 K.
    If you need to pick different price as per valuation type, then you can do this via condition table.
    Have a look into the discussion Info record Price on the basis of Valuation type

  • Stock transfer between plant to plant in blocked status

    Hi Gurus,
    Can anybody know how to use some mov. type to transfer restricted status between plant to plant?
    Many thanks in advanced.
    Luiz Geraldi

    Luiz,
    You cannot move 'blocked' or 'restricted' stock in this manner. This is not supported in ECC 5.0 and I would not think ECC 6.0 would be any different in this regard as this is a basic rule within standard SAP although I would think that in certain situations it would be beneficial to be able manage this in a simple move. 
    - As others have correctly pointed out, you have to change the stock status to 'unrestricted use', transfer/receive it (either using mvt 301, 303/305, 351/101, 641/101, 643/101 etc depending on the stock transfer mechanism used between the plants) and then finally change the stock status back to 'blocked'.
    - Another option would to be to post an inventory adjustment using mvts 701/702 in both the plants and then change stock status in receiving plant to 'blocked'.
    - Design a custom ABAP program to perform the sequence of movements in a single transaction. I think it would be important to get the timing right to avoid incorrect booking of stock.
    - The movements could be also be linked in a single transaction using a workflow solution although I am not sure how simple or complex the solution might be.
    Unfortunately, the quantity strings associated with movement types are hard-coded by SAP. So, it would not be possible to achieve this move using a custom movement type without any modifications.
    Hope this helps.
    H Narayan

  • Query on stock transfer between plants

    HI guys,
    In stock transfer storage location to storage location in one step, all stock types are allowed. Whereas, in two step, only unrestricted stock is allowed. Can I know the reason why!?
    In plant to plant stock transfer either one step or two step, only unrestricted stock is allowed. What is the reason?
    Regards
    Prasanna

    in plant to plant stock transfer either one step or two step, only unrestricted stock is allowed...
    It is not true.
    In intracompany two step stock transfer you can post GI from unrestricted, QI and blocked stock as well (MIGO GI for PO, in "Where" tab you can specify the stock type) and you can choose in which stock type you want to receive the goods (MIGO Goods receipt for PO > in "Where" tab you can specify the stock type).
    So, 9 combinations are available.
    Re: Stock tranfer order with block stock
    Regards,
    Csaba
    Edited by: Csaba Szommer on May 22, 2009 12:40 PM

Maybe you are looking for