Stock Transfer for Excisable Materials Using Movement Type 301

Hi,
We are having a Plant 1002 as excisable Materials.
During GR we following the process like GR (Part -I), Capture Invoice, Post Invoice.
Can we transfer the Material from Plant 1002 to other Plant, say 1001, using Movement Type 301?
Or we need to follow some other router for Stock Transfer for the Excisable Materials?
I was told by the ex-consultant that we would be using Mov Type 301 for all Stock Transfers, but I have a doubt, please guide.*
Regards,

Hi PK,
Here in Brazil we work with excisable material and when we have to transfer it plant to plant, we have to use IVA that performs tax posts on accounting document. Also, we have to create Nota Fiscal (BrazillianLegal Document).
I think you have to talk to your legal/accounting area in order to make sure which procedure you will have to use.
If you need tax posting on accounting document, then you will not be able to use 301 movement type.
We use MM/SD Plant to Plant transfer (movement type 861 / 862)
Depending on your Legal/accounting area feed back, you could use this scenario or just MM plant to plant transfer (movement type 303/305).
If they are ok with no tax postings on accounting document, then 301 movement type should be used.
Try to make a test, show then how it works, then you could get ok from then
I hope it helps you.
Best Regards,
Natan

Similar Messages

  • Stock transfer for blocked materials

    Hi,
    I have blocked the material  for procurement in MMR, in purchasing view in "Plant-sp.matl status" field...
    Now when ever i am creating PR,PO i am getting error message as "Status "Blocked for procment/whse" of material XXXXX does not allow external procurement"...Till Here it is correct.
    Now my requirement is, i do not want to procure this material, but i want to issue and do stock transfers for the remaining materials which are lying in my premises.
    When i tried doing stock transfer i got error message that "Material XXXXX has status Blocked for procment/whse in plant XXXX
    Message no. M7092..
    I tried to change the message as warning in OMCQ,There i didnot found this message, so i created it and made it warning.
    Now when i tried Stock transfer again i am getting same error.
    Pl help.
    Utsav

    hi
    goto OMCQ and click n new entry and then add this message as folows
    version   00
    Application Area   m7
    Message number   092
    and make this as WARning
    or goto OMS4 and here for ur block indicator make the Purchasing msg. as A  i.e. warning
    regards
    kunal
    Edited by: SAP Learner on Jul 16, 2009 1:29 PM

  • Stock Transfer by movement type 301 referring STO

    Dear Experts,
    I am unable to generate a stock transfer referring an STO in MB1B or MIGO by movement type 301. I am successfully doing whenever I refer a Reservation. Please advice.
    Regards,,
    Subhro Chakravarty

    Hi,
    i have to ask you to read the SAP Documentation for 'Stock Transfer Using a Stock Transport Order'.
    It is explained there how to post a goods movement for STO.
    http://help.sap.com/erp2005_ehp_04/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm
    br, G

  • Two step 303, 305 movement stock transfer for split valuatin material

    Hi expert,
    we are using split valuation for material in IS -Retail for both warehouse  as well as store. when i am transfer material from store with movement type 303, message is showing'Use one-step procedure for transfer posting to art. subj. to valuation'.
    we wave to use this method in case of split vauation material.
    how we can do.
    Regards,
    Santosh

    Hi Santosh,
    Try to transfer material using TCode MB1B with Mvt type "301".
    Movement Type "301" is used for stock transfer - One step process.
    So when you post transfer using Mvt. Type 301, the receiving store will not require to do GRN for that material.
    Hope this helps you. Let me know in case you need some more info.
    Regards,
    Nikita

  • Capture excise inv for movement type 301

    Hi All,
    can we capture and post excise invoice for movement type 301.
    If "YES" so plz give me detail.
    Thanx....
    Trupti

    Hi,
    I think you can do it.But you have treat this as stock transfer purchase order and you have to do the billing through the SD module. For details you can check with MM Forum.
    regards
    ramakant

  • Sales Returns Stock posting using movement type 651

    Hi Experts,
    I want to upload the sales returns stock using movement type 651. Because, our existing company code 'xxxx' has been changed to 'zzzz' and all the stocks, balances and so on has been uploaded and carry forwarded to new company code 'zzzz'.
    Now, I stuck with the customer/sales returns stock. Also, I know that there is no accounting effects with the movement type 651 i.e., blocked stock stored in customer rejection storage location.
    I have tried lot but I didn't get the solution for the same.
    Kindly share some ideas to upload the sales returns stock.
    Anandkumar KS

    Dear Experts,
    First of all, sorry for late reply.
    I tried using the movement type 655, but i can't able to post the stock.
    Is there any other way to post the stock in customer rejection storage location with the movement type 655?
    Also, it should not create any Accounting Document while posting the stock.
    Please advice me in this issue.
    Anandkumar KS

  • Material to Material Transfer using Movement Type 309

    Hi,
    We have activated the material ledger.
    Issues:
    When we transfer material A to Material B using Movement Type 309 the price difference from Material A was not allocated to Material B after executing CKMLCP.
    But the another company who using the materail to material transfer, the price difference was allocated to receiving material.

    Hi,
    Please check SAP Note 167722 to able to do multi-level price determination for material transfer with using modification.
    best regards, Takashi

  • Can we use Movement Type other than 653

    Hi all
    we are using movement type 653 for material which are being returned by customer.
    we dont want to create FD ( Free of Chagre)  Sales order against the returned delivery.
    Problem
    The Return Delivery is being showed in VLO6  transaction,(outbound delivery),we dont want the return delivery to get displayed in this transaction.Is their any other transaction we can use inplace of 653,in order to get material in unrestricted stock as well as the delivery should not be get displayed in the transaction.
    I have created the new return delivery type (By copying LR) and at the time of runing the T-code VLO6,I exclude that delivery.
    In this way the delivery is not being shown.
    If there is any other way to slove this issue please let me know.
    Thanks
    Siddharth

    The "Return Delivery" is being showed in VLO6
       transaction, "(outbound delivery)"
    Not sure on this.  When you say you created a return delivery, how it is appearing in outbound delivery list.  For information, standard movement types in SD for returns are 651, 653 & 655 and transfer the blocked stock to unrestricted use with movement types like 453, if you wish to do so.
    But strictly speaking, all returns will have to be addressed in QM and only after their clearance, any returned material should be reused.
    thanks
    G. Lakshmipathi

  • Stock transfer order excise

    Dear Experts,
    Can i know wt are the special things comes in stock transfer order excise  compare to domestic excise process?
    i know abt domestic excise invoice process.. pls let me knoe the process of stock transfer order-for excise --
    Regards
    ishikesh

    Do the following steps for STO Customizing:-
    1. Create a customer master record for the issuing plant.
    2. Create a vendor master record for the issuing plant, and enter customer account number in the Customer field on the Control screen.
    3. Repeat steps 1 and 2 for the receiving plant.
    4. Assign the plants to the customer master record in Customizing for Materials Management (MM), by choosing Purchasing <Purchase Order < Set Up Stock Transport Order< Plants.
    The Process Flow would be as follows :-
    Create a stock transport order, following the standard procedure, and send the order to the issuing plant.
    Issuing plant has processes your order, and when it is ready to ship,the storeperson at the issuing plant issues the goods using a transfer posting. The excise clerk there creates an excise invoice.The excise supervisor verifies and posts the excise invoice.It then sends the goods to you, together with the excise invoice.
    Once the goods arrive, you follow the standard procedure for incoming excise invoices:
    The excise clerk captures the excise invoice, using the stock transport order as the reference document. The storeperson enters the goods receipt, again using the stock transport order as the reference document.Alternatively, you can first enter the goods receipt and then capture the excise invoice.
    The excise supervisor then posts the excise invoice.
    Best Regards,
    Ankur

  • Stock Transfer for Assets Item

    Hi MM guru's
    what is the procedure for stock transfer in SAP  for assets (Plant to Plant)
    Thanks in advance

    Hi there,
    If the stock you can see in MMBE you can go for plant to plant stock transfer using MB1B movement type 301
    if you cant see the stock that means you have received the material from PO having account assignment category A which says it is an asset.
    Now for that you have to go for the asset to asset (Asset code to Asset code ) create an asset code in the reciving plant and transfer through FI module path. Just consult your FI consultant for the same.
    Rewards if helpfull
    Regards
    Sujoy

  • Intercompany Stock transfer for KMAT configurable material

    Hi All
    I have a scenario in which we do intercompany sale of machines which is KMAT - configurable.
    company A & B ,
    company B's customer raises a order...
    this raises a order in Company A , and producion in A takes place , and material is created as sales order stock
    This is then delivered and invoiced to PLANT_B which is a customer (but linked to plant B of company B)
    Now I create S.O., MD02 , C040 , C015 and then MIGO to transfer to sales order stock.
    I am assuming that the customer in inv. is PLANT_B which is customer linked to plant , so this should transfer the stock to plant B. and then we can go ahead and deliver and inv to end customer OF COMP B.
    Now how do I transfer this stock from sales order in COMPANY A to Sales order in COMP B
    Remember since this is a KMAT ocnfigurable material , and not a normal material.
    So the cycle is
    COMP B S.O -> COMPA S.O -> COMPA - PROD ORDER - > DELIVER COMPA -> INV COMPA -> DELIVER COMPB ->INV COMPB
    Please help.

    Hi,
    First try to transfer the stock to unrestricted stocj of company B with the help of STO process. Once it goes to unrestricted stock of company B then move this stock to sales order stock of company B using movement type.
    << Moderator message - Point begging removed >>
    Regards,
    Kishore
    Edited by: Rob Burbank on Dec 8, 2010 4:11 PM

  • Writein/Writeoff using movement type 501/502

    Hi all,
    Please tell me that can we use movement types 501, 502 for material writein and write off ? Are there any SAP recommendations for this?
    Please respond,
    Best Regards,
    AI.

    Hi,
    501/502 is used for GR without PO. When you receive material without PO that time to make GR you can use this movement type. There will be seperate GL assigned to this to have proper information.
    For writein / write off you can use physical inventory in SAP.
    This situation comes due to discrepency in stock quantity which can be corrected using following procedure.
    Create Physical inventory doc with MI01
    MI04 for entering count
    MI11 for recount or to change the count
    MI07 for Posting the difference
    Regards,
    Umesh
    Edited by: Umesh Agrawal on Dec 17, 2008 10:56 AM

  • Posting of Goods Issue for a Delivery (Different movement types)

    Hello SD Experts,
    We have this process wherein we use Deliveries w/o reference. There's a customization in place for this process, the movement type is determined through the item category of the material.
    Given this scenario, my question is if it is possible to process the goods issue of a delivery with multiple item which require different movement types (diffrent items and item categories thus it have different movement types)?
    Thank you for your kind consideration.

    Hello,
    Yes, you can.
    As you know LO is std delv doc for delv w/o reference.
    And I cat determination for that LO delv doc are
    Delv Type  __ I Cat Group  __  Usage __ High I Cat  __  Def I Cat  __ Man I Cat __ Man I Cat
    LO _____________________TEXT ______________ DLTX          
    LO ________DIEN____________________________ DLX _______DLX     
    LO ________LEER___________________________ DLN          
    LO ________LEER________________DLNG_______DLNZ          
    LO ________LEIS_____________________________DLX_______DLX     
    LO________ NLAG____________________________ DLX          
    LO________NORM____________________________DLN          
    LO________NORM________CHSP_______________DLN          
    LO________NORM________CHSP____KLN________KLN          
    LO________NORM________CHSP____TANN______TANN          
    LO________NORM________PACK_______________DLN________DLX________DLP
    LO________VERP____________________________DLN          
    LO________VERP_________PACK_______________HUPM______DLN     
    LO ________VOLL____________________________ DLNG          
    LO ________ WERT____________________________ DLW          
    Corresponding maintain movement type in Schedule line cat (Tcode VOV6) & determination that in TCode VOV5.
    If you want diff movement type then create your own 'Z' Sch line cat with you desired Movement type (Tcode VOV6) and determine the Sch line Cat accordingly in TCoDe VOV5.
    Thanks & Regards
    JP

  • Intercompany Stock transfer for Returns

    Hi,
    Can any one help me in giving solutions for Intercompany stock transfer for Returns. I need the Steps involved the above process.
    Regards,
    Kannan

    Hi Laura,
    If you are processing with delivery, you shd check the delivery indicator in MBRL Transaction.
    In your scenario if Plant A has shipped to plant B and Plant B return to plant A on a return PO. Plant A raises the crdeit memo on plant B.
    Typically returns are done with as you create a  return purchase order with Return indicator create an outbound delivery  and do 161 movement and subsequent PGR on the outbound delivery.
    Thanks
    Sudhakar

  • QM Quality  Module - error in transfer insp to blocked via move type 350

    QM Notification - Additional Functions in Action bar  - error in Insp to blocked (movement type 350)
    We are trying to implement the movement of goods from inspection to
    blocked stock through QM. We have added an item to the action bar and
    are using movement type 350.
    We have implemented several inventory transactions via the action  bar in Quality notifications.  All the transactions work except  this one.  We get the message "Must change Inspection Quantity  in QM system".  This is Movement type 350.  The Inspection to  Free (Movement type 321) works fine, as do Blocked to Inspection  (type 349) and Free to Inspection (320).
    Has anyone encountered and resolved this?

    Dear LudovicBento
    You cannot run this FM as QM stock can be  moved only by QA11 tcode. You may try to create a BDC to post the material
    from Quality
    Regards
    Gajesh

Maybe you are looking for