Stock Transfer from WM Sloc to non WM Sloc

Dear Friends
We have 2 Storage location where one is WM relevant and other is not.
when we do a stock transfer from WM S.LOC to Non WM sloc, the system creates a TR and when creating a TO system does not automatically consider FIFO or even does not search for the storage type and bin. This has to be manually entered.
Can we automate the process of system choosing FIFO meanthod and searching for a Storage type and bin
Your inputs shall be greatly appreciated

Hi
Thanks for the answer,
However, the problem was missing input in Stock removal for the storage type. When i assigned the FIFO strategy, the system was automatically picking the storage type and bin based on FIFO
Thanks once again
Edited by: Anand1981 on Dec 14, 2010 12:22 PM

Similar Messages

Stock transfer between Excise Plant and Non Excise Plant

Scenario : Stock is imported from say Singapore. One of the import duties can be claimed back as CVD and pass the benefit to customer.
Requirement : Stock transfer between Excise Plant and Non Excise Plant
Question : i) If I do stock transfer from Excise plant to non-excise plant, can I transfer the CVD amount which I captured in RG23A - Part1/Part 2?
ii) If I do stock transfer from Non- Excise plant to Excise plant, can I get the benefit of CVD and pass on that benefit to customer?
Pls let me know the possiblity of above two in SAP and Legally?
thanks in advance
Sridevi

Ok! Thanks for the replies. Pls let me allow to elaborate the earlier requirement.
Trading Goods say A gets imported to India. Issue was :
1) We need to issue Excise invoice only to few customers. So, we thought of treating one batch as excise batch and remaining as non excise batch per day.
2) Stock price varies every day being batch wise produced in say Singapore.
Means Mateiral is A but price varies evey day and because of the duty payment also gets varied. For a single material master we do have different prices for each batch and also excise/non excise scenario. So, how can I get material value for each of this combinations in the system and how to identify the same.
Because of the above reasons, we thought of having two plants. I can not configure depot here because cleint requires single plant for each state as of now.
Am I clear? If not, pls let me know,
regards
Sridevi

What movment types used for stock transfer from Non-WM sloc to WM sloc?

Hello experts,
Can some one tell me , what movment types used for stock transfer from Non-WM sloc to WM sloc in the same plant through MB1B?
Thanks

Hi
When I try to use the Movement Type 311 with Tcode MB1B, in order to move the stock from IM storage Locations to WM storage Locations, I do create the Material Document Successfully, but when I try to convert the Material Document to Transfer Order, I get the message "select atleast one storage type first", but there is no storage type appearing on the screen.
Can you please help me to resolve the above issue.
Thanks.

Stock value for stock transfer from depot (RG23D) to manufacturing (RG23A)

Dear all,
The forum posts that I found are all relating to the process of how to do stock transfer from depot plant to manufacturing plant.
The question I want to post is relating to the transferred stock value.
When stock first goes into depot plant (RG23D), the excise duties (CVD, Education Cess, Higher Education Cess, Secondary Education Cess) are all inventorized. However, in manufacturing plant (RG23A), they are CENVATABLE and not inventorized.
In the transfer of stock from depot to manufacturing, how can we split out the stock value from depot and take out the excise duties to CENVAT in manufacturing plant?
If using Stock Transfer process (move stock from depot to manufacturing),
1. Create Stock Transfer Order in ME21N using UD order type
      no accounting
2. Create DO in VL10B and goods issue
During goods issue, moving average of stock in depot plant, will increase stock with the same value in manufacturing plant and reduce the stock value in depot plant. How can we reduce the stock value transferred to manufacturing plant by the original excise duties amount, and pass this amount into J1IEX? Is it done in this step or later steps?
   Dr Stock into manufacturing plant [this value by right, should be reduced as it consists of original excise duties in RG23D?]
      Cr Stock from depot plant
3. J1IJ- RG23D selection for excise invoice for delivery at depot
    no accounting
4. VF01 for proforma invoice
   no accounting
5. MIGO into manufacturing plant (capture excise invoice)- part 1 register. the excise duties can be manually keyed in based on the original RG23D entries when stock is first brought into originating depot plant
     no accounting
6. Enter Incoming Excise Invoice by J1IEX
     Dr CENVAT Input AED
     Dr CENVAT Input BED
     Dr RG23A ECess
     Dr RG23A SHECess
           Cr CENVAT clearing
7. Question: Where to Debit CENVAT clearing? In normal domestic purchase process of raw materials into manufacturing plant, Dr CENVAT clearing will be posted during MIRO time.
If this process is not the correct way to do, please advise the standard SAP recommended way to transfer from depot to manufacturing plant.
Thank you in advance.

You have to add the Excise duty condition types as a Delivery cost Pricing condition types in STO Pricing procedure and have used them in STO. In Pricing procedure, there is no concept of Deductible and Non Deductible. So, what ever the Delivery cost condition you add in Pricing procedure, the amount gets loaded on to the Material cost..To avoid this, a negative condition type needs to be inserted in Pricing procedure with a different accrual key.
You have to add One Positive condition and One Negative Condition type for the same. Negative condition type is to reduce the condition value from the Material cost during GI.
Try this scenario in development server and revert back with your observations.

Report for stock transfer from plant to plant

Hi,
Is there any standard report for stock transfer from plant to plant .
If not is there any enhancements to get the above report.
Regards,
Ravindranath.

Hi Ravi,
U can use the tcode MB51 and their u can give the input as 301 if it is 1 step in the mvt type or use 303 and 305 for 2 step transfer. and generate the report.
if u want the list of stock transport orders then use tcode ME2N and the input parameter as item category "U" and generate the report.
hope it wud have answered ur question
Reward if useful
Shawn

Stock transfer from plant to depot

Dear Experts,
I have used special procurement type along with additive cost in DEPOT.
There is one more tcode-okyo- Assign origin group to condition type.What is the use of the same?.
one more doubt in STO from Plant to depot
lets say- material(A) standard price in depot 120rs including excise/freight and 100rs in plant
while doing transfer system will dr 120 depotand credit 100 plant and 20 in depot cost center.
I m transferring this 20 rs to depot cost center and when actual freight is coming.i will book the same in depot cost center.
So 20 rs will knock off in depot.
Is it correct approach?
regards
Raman Rana

Hi Ajay,
If i will maintained Moving price at depot and standard at plant.
Lets say stock transfer from plant to depot
Standard price at plant 100rs
Price at depot=standard price at plantfrieghtinsurance= 120rs
So my inventory a/c at depot 120 rs DR
          inventory a/c   at plant 100 rs with standard price
          frieght and insurance clrg a/c 20 rs
When i got actual bill of frieght and exceise
let say 25 rs
I will debit    frieght and insurance clrg a/c 25rs
                   credit vendor a/c                     25rs
In that case i have difference of 5 rs in clrg a/c
Is it correct? or any other way for doing it?
regards
RR

Stock transfer from a Depot to a manufacturing plant

Hi All
I am doing a stock transfer from a Depot to a manufacturing plant.
I have transfered the material from depot to plant and captured the excise
in register RG23D using transaction J1IJ.Now a goods receipt in done in
the receiving plant in refernce to the outbound delivery.
Now the problem is when a excise is captured using transaction J1IEX in
reference to a Goods Receipt and manually enter the details in the system , it gives me a
short dump of BCD_Divide by Zero.
Please advice

Hi,
Go to transaction ST22 it will give you a comprehensive analysis of the dump including the reason. Looks like there is erroneous data.
Regards,
Saurabh Diwakar

IDOC - message type WMMBXY(Stock transfer from quality to unrestricted)

Hi Gurus,
I have IDOC problem.
Inbound message type WMMBXY(Stock transfer from quality to unrestricted), The status if I check in WM02 of Doc is "51-Application document not posted"
Error Message ""Required function
MB_CREATE_GOODS_MOVEMENT is not being processed".
Please Help.
Prashant

Hi
The Idoc whcile Posting using Message type WMMBXY calls the Function module L_IDOC_INPUT_WMMBXY & in turn this calls the function module MB_CREATE_GOODS_MOVEMENT.
This function is not getting executed.
Please check if the Movemnt type used is not active for WM movemnts.
If you have used previously this movemnt type & now it is not working. Please take hlep of ABAPer for debugging & finding the Root cause
Thanks & Regards
Kishore

Requirement date in reservation for Stock transfer from one storage locatio

Hi ALL,
I have activated the resevration creation by MRP for stock transfer from mail ware house to service storage location by creating MRP area for service storage location when there is requiremnt from service and when MRP is run on the MRP area the resevration in created and trasnfer order is created .but the requiremnt date in reservation is not the same asd of on service order.so kindly let me know why it is ahppening.

Hi,
check the GR processing time for the material . System may be adding GR processing time with reservation requirement to arrive at the service delivery date.
Regards,
Mrinal

Stock Transfer from One Store to Store

Hi Retail Gurus,
I have just entered working on IS Retail,basically I am an SD consultant.I have a Client who has implemented IS Retail.
Now,coming to the query,I want transfer the stock which is in Store A to Store B without any Valuation.
Kindly Help Me,
Vishal

Dear Vishal,
When articles removed under stock transfer from one site to other site, the overall inventory valuation, at company code level, remains same. Because, inventory valuation must remains same, the accounting document is posted at the time of PGI (post goods issue) from sending site.
SAP Support following Stock transfers;
(1) Store to Store single step using 301 mov. type
(2) Store to Store double step using 303 & 305 mov. types
(3) STO with SD route using 641 & 101 Mov. type
Price: Always....Valuation price + Delivery costs if any
Steps are as below for option No. 3
1. Create Purchase Order using transaction code ME21N using document type UB
2. Create outbound Delivery using transaction code VL10B
3. Post Goods Issue using transaction code VL02N
4. Create Goods Receipt against STO Purchase Order reference using transaction code MIGO
Hope this information will be useful.
Bye,
Muralidhara

Stock transfer : From QI to Unrestricted

Hi Gurus,
When I do stock transfer from QI to Unrestricted or blocked, delivery is created and when I go to pick delivery I get following error:
"Select at least one storage type first"
Message no. L3284
Can any one help me out?
Thanks in anticipation.
RajaRam

hi
pls maintain picking storage type.
by
ram

Stock transfer from bin to bin

hi,
In stock transfer from bin to bin process i need solution for the below requirement...
a)The system must raise a warning when a material is transferred to another bin, which already contains the same material with a different batch number.
b)Transferring stock to a single batch location which already contains another material/batch is not allowed.
In bin to bin stock transfer process, it is possible by system to propose destination bin automatically ?
Thanks
Muthuraman.D

The requirements that you have may be fulfilled using 'mixed storage' options available in the storage type configuration. However, there are rigid prerequisities to use certain options such as usage of storage unit management and bulk storage strategy. You may look into a custom putaway strategy (MWMTO003) to fulfill your requirements.
As for automatic proposal of bin during bin-bin transfer, it is pretty much the same set up that you'd use for any other putaway. This includes, enabling storage type search (sections & bin type, if applicable) along with indicators, defining the relevant putaway strategy, and assignment of indicators in the material masters.

Stock transfer from excisable plant to nonexcisable

Dear All,
My scenario is i am selling (proforma invoice) material "Carton" from my XYZ plant(Excisable) to ABC plant(Non excisable)
Also i am not paying for this and it will be against proforma invoice.
Material value is 100 per unit with excise value 1021= 13 (which i have paid when procured the material)Total value = 113
After stock transfer i want excise accounts of xyz plant should reversed (as i cant take benefit of this excise value which is 13 rupees) I want material master value of 100 rupees of my "Carton" material should get credited from my XYZ plant and material master of my ABC plant should get debited with 113 value (13 rupees of excise should go in material master value as this plant is non excisable)
Please let me know how to configure the same / suggest the route to do the same
Thanks,
Naren

Dear,
But it is not getting loaded on material as you cant assign stock account again for another transaction key.(It is giving error that Already it is assigned for BSX)
Entries happening are
Stock account - Credited from excisable plant's business area - 100-
Stock account - Debited to non- excisable plant's business area - 100+
Other losses material (key is AUM) - 10+
Material overheads - 10-
Please tell me the whole process
Naren

Movement type for stock transfer from investment order to the regular stock

Hi,
Is there any movement type for the transfer from investment order to storage location stock? We have wrong created purchase orders, where the GR transferred the items to the investment orders. The problem is, that there already a lot of invoices posted on this items..
Is there any clever solution?
Points granted,
Saso

Hi
In MTO scenario the stocks are manufactured for the particular sales order and in MMBE the stocks are managed as sales order stocks assigned to that particular sales order no
This is due to the sales order item cat in MTO carrying specal stock indicator as E
Opening these stocks to unrestricted is meaningless and not possible because costing and all would have been done according to the sales order
Non MTO scenario
+Note MTO stocks are different and sales order stocks are different+
All MTO stocks are managed as sales order stocks
But not all sales order stocks are MTO stocks
But if you want move the stocks from a sales order to unrestricted then MB1B movement type 411 E
Moving stocks from one sales order to another sales order MB1B movement type 413 E
Regards
Raja

Stock transfer from WH to WH

hello Experts,
here is the scenario.
we have one plant with two WH located at different geographical locations. we are planning transfer of stocks using consumption based planning taking SLoc as MRP area.
When stock comes done at WH , automatically it should trigger requirements . Now transfer of finished goods from one WH( Sloc ) to another Wh ( sloc) is of long distance. we need to capture transport cost. These transport cost is beared by Third party forward carrier. Now when we transfer the material from one sloc to sloc as of sap logic, no accounting docs get generated . how to capture delivery cost and how to invoice to vendor .
In ecc 6.0 version, we have option as activate issue sloc for sloc to sloc transfer. this config i have done. when i am creating STO process , conditions for capturing delivery costs are not triggering.
can u pls help me in this scenario.
Thanks experts
vamsi krishna

thanks

Stock Transfer from WM Sloc to non WM Sloc

Similar Messages

Maybe you are looking for