Stock transfer of QM stock thereby creating a new batch number

Dear Experts,
I have searched for this content but didn't get content which match my requirement.
My client has placed a requirement.When they receive a material against a purchase order through movement type 101 they receive it to quality inspection stock.After quality inspection this material is taken to unrestricted area through movement type 321.
Now after this material comes to unrestricted area,this material is again subject to quality inspection.Quality testing is done after a particular period.
Next quality testing date is calculated based on this formula:-321 movement type posting date + quality inspection interval days maintained in material master.
i.e:-If for a material 321 movement type is 16th July 2014 & if quality inspection interval days for that material is maintained as 365 days then next quality inspection of that material will be after a year.
Now client has placed a requirement when this material comes to quality testing,15 days prior to quality testing this material should move to quality inspection area from the present unrestricted area thereby generating new batch number for that material.
This changes the client will view in MMBE.
Gurus Please help as I'm new to QM.
Kind regards,
Pradeesh.P

Hi,
This is not possible,you cannot generate a new batch number through recurring inspection.
If you require a new batch number then during stock posting in UD you post it to new material,in your
case this will be the same materiaal and you give new batch number.
In this way a batch material has come for inspection and after inspecting it you are changing the
batch number of the material.
CSN

Similar Messages

Stock Transfer of Blocked Stock Plant-to-Plant

Hi..
I have an issue regarding Stock Transfer of blocked stock from one Plant-to-Plant.
I realize that blocked stock cannot be transfered directly.
But the issue here is that if we cannot transfer the blocked stock directly, that means we have to do transfer posting from blocked stock to unrest use then stock transfer using mov type: 301. Then in the destination plant, we transfer again to blocked stock.
If this is applied, then it will potentially raise other issues related to incorrect stock transfer by the other users once the material is released to unrest. use.
So, in short, that's why we need to have direct stock transfer scenario for this issue.
Kindly have your assistance
Thanks in advance
Albert

Hello Albert,
You are correct. We can not transfer blocked stock from one plant to another and you have to follow the same steps which you already mentioned.
As per the business logc, We can not move "Blocked" (Business term: Rejected/scrapped/spoiled) material out of our business unit except Retrun to Vendor or Scrap it. so it is also not logical to move "THAT kind of Stock" to another plant.
Hope this helps.
Regards,
Arif Mansuri
Reward if answer is helpful.

Diff between stock transfer order and stock transport order

pls any body tell me diff between stock transfer order and stock transport order .is both are use for same pursose?pls explain

Check
very imp stock transfer and stock transport order

No New Batch number creation at the time of Material Transfer Movement(309)

We are upgarding from 4.6C to ECC6.0. We have an issue in regards with the material movement type 309. At the time of creating the material tranfer using the same material as issuer and receiver, the same plant and storage location ( this process is used by the business to diferentiate batches).
In 4.6C a new batch number is created automatically when 309 movement is posted; stock and characteristics transfered are allocated at the new batch created automatically.
The same case in ECC6.0 does not create a new batch as done in 4.6C. We have looked for any SAP note or forum discussion without success.
If anybody has an answer for this issue, let us know.

As a matter of fact these configuration has been checked before, additionally we compare configuration at 4.6C and ECC6.0 and it is the same but the new batch creation (for this specific case) is working at 4.6C, not at ECC6.0.

BAPI_GOODSMVT_CREATE - How do I get this to create a new batch ?

I am calling this BAPI : BAPI_GOODSMVT_CREATE and not passing any value in the batch field
(GOODSMVT_ITEM-BATCH) and am expecting a new batch number to be created. This is not the case, the BAPI is proposing a batch number (finding one via MSEG) and erroring due to this.
Is there any flag or config to indicate 'create new batch'

Hi,
if the material is handled in batches and batch numbers
are not assigned automatically.
Regards,
Nandha

Stock transfer PRs are not getting created in APO

Hi,
I have a plant-to-plant transfer is configured using special procurement type. When APO creates stock.PRs , it does not provide any numbers to PRs and they are not getting trasnfered to R3. CIF model for PIR & POs are running good.
In CIF post processing these PRs as stuck and I see " Vendor master data does not exist for plant A" . There is vendor master data created for plant A in R3 and material info record also exists.
How to de-bug this post processing queue to see what is missing in vendor master data?
regards,
shan

Hi
Can you explain in detail your scenario..you say plant A so I suppose there is plant named B in your scenario. which one is the source location and which one destination location?
In Stock transfer from plant to plant scenario, key is to have correct settings for the system to do source determination.
Assuming plant A as destination and plant B as source. First, The material should be maintained at both the plants.
You need to have a purchasing info record(ME11) linking your material and the source plant B.
I assume you are using external procurement type in your material master. Special procurement type 40 (stock transfer)should be maintained in material master.
Then the system creates a STReq and PurReq using the source plant B. For the system to do this source determination should happen. To verify that..you can check the following...
When you transfer the purchasing info record, system automatically generates the external procurement relationships with source location as plant B, destination location as plant A and info record reference.
When you transfer material master data, the system auto'lly generates transportation lanes between plant A and plant B. (keep in mind transportation lanes should be manually created here)
So in essence you have to check if all the above things are done by the system.
Hope Im clear in this
regards
Mohan V R Chunchu

At the time of GR in S.T.O(stock Transfer) - Accouting Doc is not creating

Hi Friends,
We have one company code and 1 plant and now we created new plant no 2 in same company code.
When we are going to transfer Plant to plant thro Stock transfer Order (S.T.O) thro Transaction code ME21N.
We Issue material from plant 1 to plant 2,
When we receive Material in Plant 2 the accounting Document is not creating in 2 Sept S.T.O Procedure.
But my user wants Accounting document should be create at GR time at Plant 2.
Can u pls help me how to fix that..
Thanks,
M.

Accounting document gets generated when you issue goods (PGI)from Plant1 to Plan2.Separatly accounting document will not generate at the time GR (receiving)

Stock transfer with zero stock

Hi all,
Stock tranfer is happening with zero stock.
Is there any way to avoid this ?
Thanks
Jeyakanthan

Hi Jeyakanthan,
If you have already selected 'Block below negative quantity', please check Item Master Data ->Stock Tab: checkbox for
'Manage Stock by Warehouse' is ticked or not.
With it ticked, the system considers the stock in each warehouse and none of the warehouses can go into negative stock for this item.
If this box is not ticked, the system calculates the overall stock availability and e.g. if you do a stock transfer for an item from warehouse A to warehouse B, you will never go into negative stock in an overall view for this particular item although it is negative in warehouse A.
To sum up, you need to check the box "Manage Inventory by Warehouse" in the "Item Master Data" and at the same time "Block below negative quantity" checkbox in the Document Settings in order to block negative quantity by warehouse.
I hope this answers your question.
Regards,
Ivy Zhang
SAP Business One Forums Team

Stock transfer from Unrestricted Stock to Sales Order Stock

Hi,
We have one sceanrio where we are transferring Unrestricted Stock to Sales Order Stcok through TC: MB1B and movement type - 413.
In this the material consumption account of the material hit is assigned in GBB/VBR. Also I have made this GL as cost element.
But during this Stock transfer the system is asking for CO- Object. I dont wantt to have any CO-Object here.
How can we resolve this.
Or is there any other Transaction event key in OBYC that needs to be maintained.
Please help.
Regards
Kami

hi
try with 413 E movement type

Stock transfer from Reservation stock to Unrestricted

Hi
Is it possible to post stcok transfer Reservation stock to unrestricted stock..
Please suggest

Hi
it is possible to transfer stock with help of reservation ,from storage location to storage location,
plant to plant
but from one stock type to other stock type ( ex.Quality to unrestricted )
i don't think so
Regards
Kailas ugale

Transfer files from PC without creating a new user

Is it possible to use the Migration Assistant to transfer files (documents and photos) from a PC to my new MacBook WITHOUT creating a new user? And why the frick does the Setup Assistant not warn you on initial startup that if you do not transfer files then - you can only do it by creating a seperate user. This should be simple. Transfer files. sounds easy.

It is user friendly - that's why it asks you to migrate all of your info in the very beginning during the setup of your new Mac.
Migration Assistant creates a new user after it does its job. There's no way around that.
You can either manually move the files over from your PC into the Mac or you can use MA, let it create a new user and then share those files between the new user and your current user. When you're done you can then delete the newly (and now empty) migrated user. You cannot migrate files from another computer and have them placed into your current user.
Regards,

Create a new batch when doing a GR to a specific plant

Hi Gurus,
can you please help me by telling if there is any config which enables creation of a new batch whenever a GR is happenning for a specific plant.
I don't want to take help of ABAP Programming, is there any existing config for the same in ECC?
Regards,
B.H.
Edited by: mchowdhury on Feb 7, 2012 12:48 PM

Hi,
The below config will be useful to you , in combination of a user exit.I do not think so that there is a standard user exit , but a user exit with the code saying if the plant in the material is so and so and if the material is batch managed , take the number range from -
spro---logistics general -
batch management ---batch master -
batch number assignmnet -
configiure customer exists for number ranges
the below is the sap write up.
Configure Customer Exits for Intern. Batch Number Assignment
You can use SAP enhancement SAPLV01Z for internal batch number assignment. This enhancement contains two function module exits that you can use to define number ranges or templates for batch numbers:
EXIT_SAPLV01Z_001. You use this exit to replace the number range object and/or interval proposed by the system with your own number range object and/or interval.
In addition, you can, for instance, stop the system from assigning an internal number depending on the material or plant. You can also use this exit to stop the dialog box from appearing.
EXIT_SAPLV01Z_002. Using this exit, you can either change the number assigned by the system, or assign your own number.
Further notes
Both exits contain a communication structure with application data from the respective business transaction (plant or material type, for example). If you need further information, such as the time, the user name or the date, you must include them yourself in one of the exits.The system always checks whether the assigned batch number already exists in the system. If it does, it terminates the function without assigning a batch number.
Example
In function module exit EXIT_SAPLV01Z_001, the system uses the material type to determine number range interval XY. This number range is then used to determine number 0000100123 as the next batch number .
In function module exit EXIT_SAPLV01Z_002, the final batch number 'ABCD100123' is determined from batch number 0000100123 and plant ABCD. The system suppresses the leading zeros.
If you do not use a sequential counter for the batch number, you can skip internal number assignment in exit EXIT_SAPLV01Z_001 to specify your own batch number in exit EXIT_SAPLV01Z_002. Further information and examples for EXIT_SAPLV01Z_001 and EXIT_SAPLV01Z_002 Further information and examples for EXIT_SAPLV01Z_002
Activities
1. Implement the required enhancement.
Either create a new project or use an existing one.
2. Activate the project.
Your enhancement works only after the project has been activated.
Further notes
As opposed to modifications, enhancements are release-insensitive as they are not made in the SAP standard version but in name ranges reserved for the customer.
For more information on the general procedure for making enhancements, see the enhancement transaction under Utilities -> Online handbook.
Each individual enhancement is documented and can be accessed by choosing SAP docu in the enhancement transaction.

MM Stock transfer from blocked stock between plants

Dear friends ,
Could I transfer material from Blocked stock between plants but in Blocked stock ?
I not found this movement types in ECC.
best regards,
Ale

It is not possible to move blocked stock between plants.
You have to transfer the stock into unrestricted- then you can move it to the other plant- then again a transfer posting into blocked stock.

Can't create a new batch or open the batch monitor

I just installed Final Cut Studio 2 and everything works fine except for Compressor. When I open the program nothing comes up and I can bring up all the windows manually except for the batch monitor which is obviously needed in order to compress files. Any ideas on how to fix this?

I just installed Final Cut Studio 2 and everything works fine except for Compressor.
Ok, so Compressor isn't working. What signs are being presented that tell you this?
When I open the program nothing comes up and I can bring up all the windows manually except for the batch monitor which is obviously needed in order to compress files.
Wait a minute, you just said that Compressor isn't working. If I understand you correctly, you can open the application. It is also my understanding that you don't have any idea how the Compressor interface works.
The Batch Monitor is a separate application which is only used to monitor batches that have already been submitted from Compressor. That's all it's used for, it's just a monitor. Think of it this way, it's the gas gauge on your car's instrument cluster, it just tells you how much fuel is left in the tank, it's not the tank itself.
Here's a pretty quick overview on how and when to use Compressor:
http://www.pixelcorps.tv/macbreak153
What specific problem are you having with Compressor? Have you added a job that isn't being submitted?

Creating Single PO for all Sites in Intercompany Stock Transfer

Hi Experts
In Intercompany stock transfer scenario
Client demand to create Single P.O. for all stores ,
Is it possible ?
if yes what is customization for that
thanks in advance

STO CONFIG:
The following steps have to be followed in order to configure stock transport order
between two plants.
1. Create a vendor for the Company code of the receiving plant using account group 0007
via T-Code XK01.
2. In the purchasing data view assign the supplying plant and the schema group
3. Create customer with the sales area of the vendor.
4. The shipping conditions, the delivering plant and the transportation zone determine the
route in the STO.
5. In the pricing procedure determination relevant to the STO assign document pricing
procedure and customer pricing procedure to get the pricing in the invoice.
6. Maintain condition records for pricing condition.
7. Maintain carrier as a partner in the customer master.
8. In OMGN select the supplying plant and assign the company code and sales area.
Similarly select the receiving plant and assign the company code and sales area (The
company code to which the plant is assigned to).
9. Assign the delivery type and checking rule to the document type.
10. And finally, assign the purchasing document type to the supplying plant and the
receiving plant.
11. Create the STO using T-Code ME 21N and save.
12. Check for release strategy if any and release using T-Code ME 28.
13. Create delivery in background using VL10G.
14. If delivery is created, it is an indication of correct configuration and master data
creation.
Stock transfer between two plants in deffernet company codes is known as inter company
stock transfer.
Material shoud be maintained in both supplying and receiving plant MM01
Sotck should maintain only in supplying plant MB1C
Create receving plant as a customer in suplying plants company code and sales area
XD01
Assign this customer number in receving plant detials OMGN
Assign supplying sales area in supplying plant details OMGN
Assign delivery tupe NB for in combination of supplying/ receving plants.
Create STO ME21N
As it is normal there in the item details wer should get shipping date i.e customer number
Go for Deliveryy VL10B
Shipping point *****
Select PO go for execute
then select the delivery then go for delvy ............create delvy,,,, delvy nubmer generated.
Goods Issue VL02
Delvy doc **********
Click on picking
enter the picking qty
Click on PGI
in the mean time check in the PO history you will get the details
Goods receipt MIGO
Stock overview the stock will be updated....

Stock transfer of QM stock thereby creating a new batch number

Similar Messages

Maybe you are looking for