Stock transfer order for differrent divisions

I would like to create the stock transfer order for different divisions say 18,19. In SPRO i could set the shipping data for only one division for a plant. Is there any possibility that i can assign different divisions for same supplying plant.

Hi Sahana,
Division is defined as per the material. So, why you need to put a material belongs to one division to some other division.
I dont think SAP allows for it.
Reward if it helps.
Bidhu

Similar Messages

Transaction to see the Open stock transfer order for the plant

HI ,
i need to develop one report in that client to make the report for the all open stock transfer order & the cost of the open stock transfer order for the plant .
I need how to cretae the stock transfer order for the material , whci material master is required for this process.
please give me step by step details for this .
regards
satish
Edited by: satish kapartiwar on Jul 16, 2009 9:33 AM

Hi Satish,
You can see open stock transfer quantity in MB5T and stock value in MB5L. If you want to make stock transfer, there is two types intra company transfer(with in same company code) and inter company transfer (different company codes).
Steps for Intra company stock transfer:
This is only within the comp.code(w/o SD)
(w/o SD) 351101 MvT. and (with SD) 641101
1. Mat.(1434)should be maintained in both the plants.(@1000&1100).
2. Should have enough stock in supplying plant(1000).
3. Make its supplying plant as a vendor in vendor master record in receiving plant(1100).
4. Make it receiving plant as a customer in customization.
Create customer (xd01) & and define the shipping data for plants in both the plants.
Path: spro u2013 img u2013 material mgmt u2013 purchasing u2013 po u2013 set up STO u2013 define shipping data
(1 by1 )
In Receiving plant (1100)
Customer num. 123345 (for ex.)
Sales org. yyy
Dist. Channel yy
Sales div. y
In Supplying plant (1000)
Customer num. -
(don't fill)
Sales org. yyy
Dist. Channel yy
Sales div. y
5. Assign doc. Type is "NL" for intra company STO. If STO is inter company, Assign doc. Type is "NLCC".
Position doc type is "UB"
Enter supplying plant(1000) & doc type (NL)&checking rule (ex:01)
6.Assign doc. Type is "UB" to u'r plants.(PO)
Go for new entries
Enter supplying plant(1000) & Receiving plant (1100)&doc type (UB).
7. Create a PO, choose the doc type is 'UB' & item cat.'U', Enter supplying plant as a vendor in PO of the receiving plant(1100).
8. Provide this num (PO) to SD people, they will do the delivery by using transactional code is VL10B.
9. Sales people they will provide "out bound delivery num".
10. Do the GR. In GR the second tab 05 outbound delivery instead of PO mov.type 101.
11. See the stock overview in the receiving & supplying plants.
Steps for Inter company Transfer:
1) Create one Customer Master in XD01 with respect to Supplying Plant Sales Area and assign this Customer no with Receiving Plant in OLME->PO-> set up STO->Define shipping data for plant and for the supplying Plant assign the above sales area.( Make sure, In Customer Master, sales Area Tab: you are maintaining shipping condition)
2) For Receiving Plant Pur. Org and Co.Code Combination create Vendor master in XK01 and in this vendor master assign the Supplying plant in Pur.Org.Data screen->Extras--> Add.Pur.data
3) OLME->PO-> Set up STO------>For your supplying plant assign document type NB, Delivery type NLCC and Checking Rule RP
4)then For your supplying Plant and receiving Plant assign Document type NB
5)Make sure you are maintaining Sales View for the material at supplying Plant and in Sales /Gen plant Data view maintain Availability check, Loading group and Transportation group.
6) In SPRo-->Logistics execution> Shipping->Basic shipping functions->Shipping point Determination>assign shipping points-> For your Loading group, Shipping Condition and Supplying plant combination, Assign shipping point
these are the configuration settings you have to do in background.
Then Create STO from Receiving Plant in ME21N with document type NB.
Based on that STO, Create Delivery in VL10B from supplying Plant
Do PGI in VL02N from Supplying plant
Do GR in MIGO at Receiving Plant keeping Outbound delivery as a ref. document.
Now your STO bet. two plants belongs to diff. Co.Codes will be completed.
Regards,
Prasath

Planning Strategies 10 and 40 with Stock Transfer Orders for consuming PIRs

Hello,
I have the following situation in a Client:
One Production Plant (1000)
There exist various Plants to sell products.
The production Plan (PIRs) I create in Plant 1000 (MD61). Monthly buckets.
The planiing strategy I want to use is 40 or maybe 10 (both to Stock).
Consumption of the materials in plant 1000 is via:
1. Stock transfer orders to other plants (with Shipping funcionality) (about 80% of the shipping form plant 1000)
2. Sales Ordes with shipping (10%)
3. Transfer postings from one plant to another (303 - 305 movement type) (10%)
How can I make sure that all these outgoing movements from plant 1000 do consume my forecast? Is this standard funcionality.
Thanks for any reply,
Aart

Hello Mario,
Thanks for your answer. I looked at the note but Im not sure it does apply in our situation.
Let me explain our situation maybe more clearly:
I want to create a monthly Forecast (MD61) with PIRs for Production Plant 1000. (Planining strategy 10)
The stock created in plant 1000, on the basis of this forecast is consumed during the month by:
1. Stock Transfer Orders (from plant 1000 to plant X) - (for 95%)
2. Sales orders (directly) (5%)
The STOs should not be on top of the PIR but should be part of the PIR.
For your information, the stock which is moved from plant 1000 to plant X via STOs, is sold at plant X (not directly at plant 1000).
this stock sold monthly at plant X however, is considered withing the forecast!
I hope this clarifies our situation a bit more.
Thanks for any anwer,
Bye
Aart

Stock Transfer Order for Delivery Note

Hello
i have facing some problem in client
i have seen one STO with Plant to Plant but iam afraid that the supplying plant and receiving plant are same , (took it as BP01 supplying plant BP01 receiving plant)
in that STO they have mentioned 3 materials (three line items) for two line items he has created the Delivery Note, for third line item system will not allow to create delivery note why? i ahve checked the purchase order history
1) is it possible in SAP STO (plant to plant) they are same?
2)if no why system will alow him to create for two line items for delivery?
3) if they were created the delivery for two line items , why not third line item?
(i have stock of all materials is OK),

Hi,
It is OK for the STO to have the same issuingh and receiving plants (although if you do this deliberately it does indicate that the org structure is suspect)
As for the third delivery not being able to be processed, there are so many reasons and so I would need the EXACT message you are getting for this.
You say that there is enough stock but is it in the right place and is it all available (remember that available stock is not the same as unrestricted stock, there may be other requirements that have reduced the available stock even though the physical stock is still sufficient).
But without the message details I can't be much more help.
Steve B

Stock transfer order excise

Dear Experts,
Can i know wt are the special things comes in stock transfer order excise compare to domestic excise process?
i know abt domestic excise invoice process.. pls let me knoe the process of stock transfer order-for excise --
Regards
ishikesh

Do the following steps for STO Customizing:-
1. Create a customer master record for the issuing plant.
2. Create a vendor master record for the issuing plant, and enter customer account number in the Customer field on the Control screen.
3. Repeat steps 1 and 2 for the receiving plant.
4. Assign the plants to the customer master record in Customizing for Materials Management (MM), by choosing Purchasing <Purchase Order < Set Up Stock Transport Order< Plants.
The Process Flow would be as follows :-
Create a stock transport order, following the standard procedure, and send the order to the issuing plant.
Issuing plant has processes your order, and when it is ready to ship,the storeperson at the issuing plant issues the goods using a transfer posting. The excise clerk there creates an excise invoice.The excise supervisor verifies and posts the excise invoice.It then sends the goods to you, together with the excise invoice.
Once the goods arrive, you follow the standard procedure for incoming excise invoices:
The excise clerk captures the excise invoice, using the stock transport order as the reference document. The storeperson enters the goods receipt, again using the stock transport order as the reference document.Alternatively, you can first enter the goods receipt and then capture the excise invoice.
The excise supervisor then posts the excise invoice.
Best Regards,
Ankur

Could not create Purchase Order Stock Transfer Order

Hi Expert!
Need your help.
User could not make Could not create Purchase Order Stock Transfer Order for new plant 1075 & 1076 at P05 with error message Not posible to determine shipping data for material. Our new vendor are 510022060 for new plant 1075 and 510022061 for new plant 1076.
The problem was caused by the missing STO setup for these two plant 1075 and 1076, as no customer code being referred.
Now i got the customer number for these two plants but how to set it up in configuration? Please guide me step by step.

Hi Crystal,
The following customising need to be carried out for Inter Company Stock Transfer.
Path : sproMaterials ManagementPurchasing-Purchase OrderSet up Stock Transport Order
Define Shipping Data for Plants :
For the Supplying plant (1) the Sales Org data to be maintained.
For the Receiving plant (2) the Customer No to be maintained.
Create Checking Rule - U can use existing one Eg : B
Define Checking Rule : Use Standard one Eg :01 linked to B.
Assign Delivery Type and Checking Rule -- For the Supplying Plant (1) and document type NB use the delviery type NLCC and Checking Rule B.
Assign Document Type, One-Step Procedure, Underdelivery Tolerance :
For the supplying Plant (1) and Receving Plant (1) ; assign the document type : NB.
Points to be noted :
The Material should exists in both the plants ( 1 & 2 ) with the sales view maintained . Note that the Loading grp / Transporting Grp is mantaory in Sales Views.
The Vendor is to be assigned to the supplying Plant (1 ) in Purchasing View of Vendor Master.
For that click on Extras - Add Purchasing data in Purchasing view of Vendor Master (XK02 )
Do maintain the customer in Control data of Vendor Master.
Do maintain the Vendor in Control data of Customer Master.
Also note that shipping conditions are maintained in the Customer Master . The same can be found in Sales Area - Shipping Tab.
Shipping Point determination :
SPROLogistics ExecutionShippingBasic Shipping FunctionsShipping Point and Goods Receiving Point Determination--Assign Shipping Points ( For a particular Shipping condition/ Loading Grp /Plant - the shipping point is assigned ).
Regards
Ramesh Ch

Sales Order which automatically creates Stock Transfer Order

Hi All,
I've the following configuration requirement....
-- A semifinished good SF1 will come to my company plant... (Stock Transfer)
-- This SF1 will get converted to SF2 (another semifinished good) inside my company. As a by-product Scrap S1 will be generated.
-- This SF2 will be transfered to vendor for external processing and producing Finished Good FG.
-- This FG will go to customer directly from the vendor.
My requirement is to create third party sales order for FG which in turn trigger PR->PO for FG. This will trigger a stock transfer for SF2 from plant to vendor. For this it will trigger a stock transfer of SF1 from plant (outside) to plant (my company). All this needs to happen when I save sales order for FG. Once the FG is saved, if I go to MD04 (stock requirements list), it should show stock transfer order for SF1, stock transfer order for SF2.
Now I've created SF1, SF2, S1 and FG in material master. Also created Customer C1 and other necessary details such as organizational units, partners etc.
Also I've created BOM for SF2 which includes SF1 and S1 and another BOM for FG which includes SF2 only.
At this moment when I create a sales order for FG and save (third party sales order), the PR is getting generated for FG. But for further levels of processing is not happening. I know that manually these stock transfers could be done. But I want this to happen automatically when I save the sales order for FG.
Please let me know what would be the ways to configue this.
Thanks in advance.

As per your thread,
1- SF1 transferred from Plant (P1)- to Plant (P2) - Cab ne mapped through STO Process / Transfer Posting from Plant-Plant(Mov type 301)
2- for this SF1, internal processing will be done in Plant-P2 to convert SF1 into SF2 in resuitl Scrap S1 will generate- Internal Production process (SF1 BOM - SF2 & S1 as child items)
3- Issuing SF2 to Vendor for further processing to convert into FG - Subcontracting Process ( SF2 - Input Material / FG - Output material)
4- Issuing FG directly from Vendor to Customer, based on Customer Order - Third party Order Processing.
As you know, through Configuration its difficult to achieve this. You may need to use the BAPI's to auto trigger these process one after the other. Still you should check feasibility.

Material Division in Cross-Company Stock Transfer Order

We are configuring the cross-company code stock transfer order process. We seem to have all configuration done, but on the PO and Delivery the division that shows up at the item level is the sales area common division, not the division on the material master. Due to this, the business area is not being assigned correctly (Plant/Division), thus now allowing us to post the invoice.
Here are the specific Doc types we are using:
PO: NB
Delivery: NLCC
Delivery Item Cat: NLC
Invoice: IV
Any ideas as to how to get the division from the material master to show up on the PO and/or delivery so that's what pulls into the invoice? We also understand the the default Sales Order type DL is set for Delivery Type NLCC in the event there is no Sales Order. For Sales Order Type DL we have set the Item Division flag, but that is not working either.
Any ideas?
Thanks
Shane Newmyer

Hi buddi,
Thanks for the info, but neither of these things help with the division issue. I need to have the material division on the PO, Del and Invoice...
Any other ideas?

Open Qty is not copied in Delivery for Stock Transfer Order

Hi,
In the Stock Transfer Order process, Once the STO Order is created, I am creating delivery in the transaction VL10B or VL10G.
When I am clicking the background button Delivery gets generated. Then when i am going in the transaction VL02N and increasing the delivery Quantity which is more than STO order quantity, the system is accepting it. But i want the system to throw an error message if the delivery quantity is more than the order qauntity. For this I have made the following settings.
In the Transaction Code 0VLP, i have selected B in Check Over Delivery field. But still it is not throwing an error.
The reason for the same may be, the system is not copying the Open Delivery Qty from the STO Order (Which normally happens in Sale Order to Delivery process, bcos of Copy Control). This field has 0 value. So the system is not able check for over delivery.
If I get this value in the delivery then it should be working fine and the sytem will throw an error for over delivery.
Can you please suggest me a way to get this open qty value in delivery for STO order or suggest me some other option to check for over delivery in STO.
Regards
Vijay

Dear Friend,
If I can understand you clearly.
to achieve your task the best way you can sit with your abaper and configure a routine and assign the same to T-code OVLK delivery type customizing :
In the Item requirement : Generally it is 202
reward points if helpful,
regards,
Amlan

Table for the PO Date and Stock Transfer Order Date of a material no

Hello Everyone!
I am having a requirement where I want both the Purchase Order Date and Stock Transfer Order Date of a perticular material no.
On the basis of difference of these two dates I want to find out the period for which the material was present in supplying plant.
I am not getting the table through which I can get these two dates for a material.
Please help me out.
Its urgent.

hi,
see these tables:
     EKKO Purchase Order Header Table
     EKPO Purchase Order Item Table
     EKBE PO History table.
reward if its useful

Proforma invoice not created for stock transfer order

Hi Experts
while creating a proforma invoice for stock transfer order between the plants we are not able to create proforma invoice , the process is replenishment delivery is created and Wm is also done and the billing with reference to delivery and the item category is relevant for billing with value J, and below is the message i get whilw creating invoice
     Technical data
         Tech. data details
          Client
          Group Number
          Sales Document Number
          Item Number of the SD Document         000010
          Schedule Line Number                   0001
          Counter in Control Tables              00
          Message Identification                 00
          System Message Number                  001
          Output Type                            E
          Message Variable 01
          Message Variable 02
          Message Variable 03
          Message Variable 04
          Group Type                             F
No biliing documents generated
Please suggest.
Thanks

This explanation is not in detail and hence I am not clear about your configuration settings.
First go to IMG Logistics-General => Tax on Goods Movements => India => Business Transactions => Outgoing Excise Invoices => Assign Billing Types to Delivery Types.
There ensure that you have assigned the billing type JEX (assuming that you are using the standard) to your delivery type NL.
Perhaps, you can also try with "D" for your item category in Billing Relevance field but I am not sure this will solve your issue. Try in development client.
thanks
G. Lakshmipathi

Problem on creation of Outbond Delivery for Stock Transfer Order

Hi all,
We have problem on the creation of Outbond delivery for stock transfer order because the system doesn't group in a unique delivery for different items of a STO order.
We used VL10B or VL10D but the behaviour is the same. Even if we have to handle few items of the Stock Transfer order already scheduled, the scope is to create a delivery which group everything while the system split in several delivery notes.
Could you advice me the way to set in customizing , master data I don't know where else , the rules in order to avoid to split deliveries for STO.
Secondly if we have already created a delivery note is it possible to add a further purchase order item as in sales order processing?
Thank you for any suggestion you will give
Andrea

Dear Kripa,
the first point has been solved. We have checked a SAP Note 386340 which is appropriate to this case.
The second point, the one referred to the additional items to an existing delivery note, is not yet closed and I would like to know further advices from you and the other guys connected to the forum in order to help us to solve the problem.
Thanks for your help
Andrea

Tcode for creating Stock transfer order

Tell me tcode for creating STO(Sales transfer order).

Hi,
<b>STO(Stock Transfer Order)</b> is nothing but one type of Purchase order that will be created using <b>ME21N</b> tcode like other types of PO's.
Go to EKKO and EKPO tables
enter EKKO-BSART = 'EUB' or 'UB'
take the old data of one of the order from EKKO and EKPO and create the STO with that data. like plant, shipping point etc.
Regards,
Padmam.

FM or BAPI for Create/cancel stock transfer order invoice

FM or BAPI for Create/cancel stock transfer order invoice
Thanks and Regards,
Srinivas P

Hi,
use BAPI_PO_CREATE, po_header-doc_type = 'UB'
Thanks,
Reward If Helpful.

Release order for a stock transfer order in Product view

Hi Experts
My question is that i cann't see Release order for a stock transfer order in Product view which are available in MD04 in R/3.
I have checked all the settings for Strategy group 50-Planning without final assembly in R/3 and Requirement type in APO. In APO I have checked requirement type and category group and I can see that in category we have defined Stock Transport Requisition, Stock Transport order, Sales Order, TLB:VMI sales order, Replenishment delivery and VMI delivery as category.
One more thing i am not even selecting any selection profile for Product view.
What i need to check, Kindly suggest.
Regards
G C

Hi G.C
Check whether you have maintained correct integration model. Create integration model for transactional data. Select the sales order and PO/PR option in CFM1. The reason you need to send the sales order first when you are working with stock transfer order/stock transfer scheduling agreements you first have to send the sales order and then PO/PR. Activate the integrtion model.
First check in ECC for the Integration with Other mySAP.com Components==>Advanced Planning and Optimization==>Initial Data Transfer==>Change Transfer==>Change Transfer for Transaction Data==>Activate Online Transfer Using BTE==> here check (ND-APO, NDI options are have been checked)
Also check for the Maintenance of distribution definiton under APO -SPRO==>Integration with SAP Components==>Basic settings for data transfer==>Publication==>Maintain distribution definiton==>Select the publication type(External procurement, Delivery,Shipment) and assign to all the plants you are working with for STO.
Try the above steps and do let me know if it worked.
Regards
KRN

Stock transfer order for differrent divisions

Similar Messages

Maybe you are looking for