Stock Transfer Order Scenario

Dear Gurus
This is regarding Stock Transfer Order.
I am transfering the Stock from One Plant to Another in Same Co Code.
MAterial-1 Which is Processed in Plant-1 and is sent to Plant-2.
After Processing and sending it to Plant-2.
My Client wants that in Plant-1 80 % Profit should be shown and in Plant-2 after Processing 20% Profit in accounting documents should be shown on the final delivery of the Material.
For Eg: Material-1 is Manufactured in Plant-1 and packing is done in Plant-2
Manuf Cost in Plant-1 is 80 Rs and Packing Cost is Rs-20 ,Profit in Plant-1 should be 80% and Profit in Plant-2 should be 20%.
Please Guide us how it can be done.
Regards
Shailesh

Hi Shilesh,
Are you doing costing for the material? If so i believe the profits can be distributed when u do the costing run. Pls check with finance team as well.
If you want to do pricing config for stock tranport order, you can copy the std pric proc (RM2000) and modify as per requirement.
Cheers
Arun.

Similar Messages

Cross-system stock transfer order (cross CC and without using APO)

Dear experts,
I want to set up a stock transfer order scenario cross two SAP systems (and cross company code).
The examples given in SAP documentation point to scenarios using a joint APO system.
At the same time the documentation reads:
The number of process variants is a result of the combination of system landscapes and organizational units:
- with or without joint SAP APO
Does anyone in here have experience in setting up this scenarion without using APO system and could help me with a process flow and the IDOC sequence used for this?
Thanks and regards
Norbert

Hi,
and thanks for looking into this.
No, I do not have an APO (company is using JDA/manugisitcs) and I want to set up cross system STO between two ECC 6.0 systems directly.
I do have a number of idocs running between the systems already and also know the place where to configure a plant for cross system goods flow.
What I would like to know is if this scenario is supported at all and if yes, what is the sequence of idocs and and what are their triggers (in other words - the technical side of the business process) .
Best regards
Norbert

Routing in Stock Transfer Order

Hi,
We are having SAP 4.7 & we have activated Transportation Routing process.
Routing is copied in Sales order & Delivery. But the same is not copied in the stock transfer Order. We are doing following steps.
We are using Stock Transfer order to transfer the material from One storage location to another storage location. Supplying Plant & Receiving Plant are same in Stock transfer Order. We are entering Receiving STorage location & Shipping point in the STO.
Is this b'coz of Supplying plant & receing plant are same in the STO ? Or i need to active something els for this.
Kindly revert back.
Thanks in advance.
Samir Bhatt

Hi,
this is one of the problems caused by an organisation structure that is not quite matching the "real world".
In SAP each Plant should have a unique address and the storage locations are thought of as areas within that address.
If you have two sites that have different addresses, they should <u>ideally</u> be separate plants. You can then use all of the available functionality within SAP that you would expect.
If you want to set up a route that goes from one address to another than this is possible, but in your case you are actually saying that you want a route for s delivery from and too the same address, not really a real world scenario.
So if you really want to do this then each site should be a plant. I expect that it is too late to change your design but it is important for others reading this to understand the problems that are caused when Storage locations are used instead of Plants for physically separate addresses.
Sorry if this is not much help to you but it should help you to understand why you are having a problem.
Steve B

RE: Intercompany stock transfer order process

hi SD Experts,
I really appreciate if anyone explain me how to execute Intercompany stock transfer order with intercompany billing scenario.
I used T-Code ME27, but unable to do delv and intercompany billing
thanks in advance
regards
vaseem

hi
Material should exist in both the plants (Delivering & Ordering),
Internal customer should be assaigned to the ordering plant ( MM -> Purchasing -> Purchase Order -> Setup stock transport order -> assign the internal customer to the ordering plant and assign the Sales area of the internal customer.
Assign its Sales area to the delivering plant
Assign the document type and Delivery type NB and NLCC
Assign the Supplying plant --> Receiving Plant --> NB
Take the delivering plant and assign the sales area.
Vendor master has to be created and assaign the supply source ( Delivering Plant).
Create a puchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assaign the purchase order number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
Billing (Intercompany pricing conditions should be set).
rewards point it helps

Sp.Procurement key 40 stock transfer order.

Hi Friends,
I am facing typical probelm in post go live stage of the project .
Scenario : 2 plants say 'A ' & 'B' both are producing product 'x'. this product contains dependent componenets 'y' it is onle produced in plant A.
Hence sp.procurement key 40 (stock transfer order) is maintained in plant B for component y .
MRP runs monthly once.
Storage location stock excluded from MRP run
Pur req cretaed in in nplant B and planned order in palnt A.
Pur req converted in to number Purchase orders (PO items) partialy.daily arround 20 Purchase orders are created,
Now th problem is while carring out MRP run for next month system considers the open PO items while caluclating requiremnt of y
My requirement is that system should not consider open PO , it should give gross requiremnt of Y depending upon PIR ;s of x.
Stratgey 11 is mainatined for x in both plants
Regards
Sandeep

Hi
You have to run total planning & configure scope of planning.
accordingly run MRP not for single plant.
Further please follow the following link which is self explanatory.
http://help.sap.com/erp2005_ehp_02/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm
In the above link it is clearly explained as to what procure ment types to be maintained.
Pl. follow the same.
Also run MRP for scope of planning.
Regards
YMREDDY

No planning of Stock Transfer Orders

Hi,
I have business scenario in which we transfer the material from production plant to the sales Depot using Stock Transfer Order created manually.
We do not want include these Stock transfer orders in planning run.
could any one reply on this.
regards
VS

Hello AV,
In the material master of that material (for the production plant where you run the MRP), select the MRP-4 view and in that for the field MRP Dependent Requirements, select the indicator1(Materials for dependent requirements are not planned). This solution i am giving by considering that you are creating the Stock transfer order in Depots and running the MRP in production plant.
Please check and confirm.
Regards,
Jitendra chauhan.

Re-calculate delivery date in Stock transfer order ( STO UB ), V_V2

Hi, running the transaction v_v2 only Sto (Stock Transfer Order) At item level.
Scenario:
         Sales order in Plant 2.
         Sto , Plant 1 to Plant 2.
         Purchase Order To Vendor in Plant 1.
When I run V_V2 in Plant 1, the First execute transaction V_V2 is OK, This system availavility check the STO and confirm the delivery date and the quantity.
Now I change the delivery date in Purchase Order but the transaction V_v2 in plant 1 don´t make any change in the STOCK TRANSFER ORDER (STO) in the Delivery Date field.
Why the systen don´t change the delivery date in STO automaticaly, Becuase I can change manualy in ME22N transaction, and the sytem confirm the quantity and the confirm date.
Other Example.
I have good issu the Purchae Order in Plant 1 and execute V_V2, the sytem do not re-calculate the delivery date in STO, Why ?.
Thanks.

A solution has not been identified for this issue...query closed.

Shipping point determination in stock transfer order,

Hi, experts,
I have one problem regarding stock transfer note, In my business scenario, product wise SR no use for excise invoice, So, i had maintain no range as per shipping point wise, But , when i have create stock transfer order, at a time system take default shipping point , as per shipping point determination, But i want to different shipping point in this stock transfer order, but i can not change shipping point in stock transfer order, Can u give me any solution of this problem,
T.code - Use - ME27
Order type - UB
Regards:
Happy

First create a STO with a Plant as per your Requirement by maintaining the same Plant in the Material.Also maintain the same Plant in determining the Shipping Point Determination.
Otherwise to change the Shipping Point Manually is not a good habit by the Users.
Best Regards,
Ankur

Check different line items supplying plant in stock transfer order

Dear All,
I want to apply a check with error message if the line itmes in a stock transfer order is not belonging to same supplying plant.
i.e. a str is created with various line items having receiving plant same but supplying plant is different. Now when i m creating a stock transfer order with reference to same stock tranfer requisition the system allows to create the stock trsfer order.
But i want to check that only line items having same supplying plant will allow to create the stock transfer order else dipaly an error message.
Plz suggest.
Edited by: sdrakesh84 on Jun 11, 2011 8:18 AM

Hi,
this is one of the problems caused by an organisation structure that is not quite matching the "real world".
In SAP each Plant should have a unique address and the storage locations are thought of as areas within that address.
If you have two sites that have different addresses, they should <u>ideally</u> be separate plants. You can then use all of the available functionality within SAP that you would expect.
If you want to set up a route that goes from one address to another than this is possible, but in your case you are actually saying that you want a route for s delivery from and too the same address, not really a real world scenario.
So if you really want to do this then each site should be a plant. I expect that it is too late to change your design but it is important for others reading this to understand the problems that are caused when Storage locations are used instead of Plants for physically separate addresses.
Sorry if this is not much help to you but it should help you to understand why you are having a problem.
Steve B

Stock transfer orders

Hi Experts,
Can i know what is stock tranfer order?
how to create stock transfer oreders.

Dear Raghavendra,
Whenever you need to transfer the materials from one plant to another plant belonging to one company or belonging to two company code stock transfer order is raised by the delivering company.
STO:
Transfer of goods from one location to another location,it may be between plants within the same company code or in different company code's plants.
within the company code, bet plants, receiving plant will raise the STO in Supplying/issuing plant-ME21n,
Supplying plant will deliver the goods to receiving plants , then we need to pick n post the Goods Issue-VL02n, nw when we can observe that the STO qty will be added into receiving plant and reduced in Delievering plant.
To do this, we need do prior customizatin in SPRO-IMG,-material should be created in both plants( receiving & Supplying)
-maintaing the stock only in supplying plant
-create a dummy customer in supplying plant's sales area(if u have one sales area, create in tat comp code n sales area)
-Assign this customer number to receiving plant's details along with the sales area,
-Assign the STO doc type(UB) to Supplying plant, along with checking rule
-Assign the Del type (NL/NLCC) to Supplying n receiving plant.
You create a STO from MM route i.e., ME21N and then enter the details of the supplying,receiving plant and the materials.Once you complete the STO,then it goes for a delivery followed by an intercompany invoice.
Remember that the Material should be there in BOTH supplying and receving plant.
Internal Procurement (Stock Transfer With Delivery):
In a company, goods movements do not only occur in the form of goods receipts and goods issues. Depending on the organization of the company (for example, decentralized storage) and its sales policy, internal stock transfers might also be necessary.
The stock transfer with delivery is a plant to plant scenario. You are posting a goods issue in plant BP02 and a goods receipt in plant BP01.
This type of stock transfer can only be carried out from unrestricted-use stock of the issuing plant to unrestricted-use stock of the receiving plant.
You post the placement into storage at the receiving plant in a second step. Only then is the event completed and the transferred quantity part of unrestricted-use stock.
Functions:
Creating a Planned Independent Requirement
Creating a stock transport order in plant BP01
Generating a delivery in plant BP02
Picking of the material and posting the goods issue in the delivering plant
Posting the goods receipt in the receiving plant
Note: The quantity posted from stock is first of all managed as stock in transit of the receiving plant. Only once the goods receipt has been posted is the quantity posted to the unrestricted-use stock of the receiving plant. This enables the quantity "on the road" to be monitored.
The transfer posting is valuated at the valuation price of the material in the issuing plant.
Delivery costs can be entered in the stock transport order.
Internal Procurement (Stock Transfer without Delivery):
The cross-plant, internal procurement of materials can be carried out within one company code (intercompany) or by using several company codes (cross company). This process can be dealt with using standard functions such as material requirements planning, purchase requisition, stock transport order, transportation planning and the handling of internal deliveries.
The following functions are provided to support the Internal Stock Transfer without Delivery:
Create Stock Transport Order
Post goods issue for stock transport order
Post goods receipt for stock transport order
Note: Quantity "on the road" can be monitored
Delivery costs can be entered in the stock transport order
Internal Procurement (Cross-Company Stock Transfer):
You post a stock transfer from company code to company code the same way as you post a stock transfer from plant to plant, except that both plants belong to different company codes.
During the stock transfer, two accounting documents are created in addition to the material document:
-An accounting document for the removal from storage at the issuing company code
-An accounting document for the placement into storage at the receiving company code
The stock posting is offset against a company code clearing account.
To display the value of the cross-company-code stock in transit with a report, choose Environment à Stock à Stock in transit Cc.
The following functions are provided to support the cross company stock transfer:
Create sales order to customer
Run single-level MRP
Creating a purchase order
Creating delivery
Picking and post goods issue
Posting goods receipt
Create inter-company billing document
Invoice receipt
Create delivery, picking and post goods issue to customer
Billing
Notes: The issuing plant enters a delivery for the stock transport order and a billing document. This is an inter-company billing document (billing type YBIV). Pricing takes place as normal.
When the goods arrive, the receiving plant posts a goods receipt for the purchase order. The unrestricted-use stock increases and an accounting document is created.
The invoice is checked with reference to the purchase order.
Stock transport order processing in receiving plant
Delivery processing in supplying plant Picking batch determination in delivery Goods issue processing in the supplying plant Billing processing in supplying plant
Goods receipt processing in receiving plant Invoice verification processing in receiving plant Purchase order monitor processing in receiving plant
Stock Transport Order:
http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b911d43ad11d189410000e829fbbd/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b917843ad11d189410000e829fbbd/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b918543ad11d189410000e829fbbd/content.htm
Regards,
Naveen.

Urgent Condition Tab Missing In Stock Transfer Order

Hi All ,
When I a m creating Stock Transfer Order from One Plant In one Company Code to Another Plant in another Company code the Invoice and Conditions Tab Is Missing .
How to get the Conditions tab, Do I have to do any Customization ?
Please suggest me of how to go about .....
Regards ,
Sriram.

Hi Srirama,
Yes, if you have only one Calculation schema then there is no meaning in assigning to different Porgs.
In that case please proceed with the following configuration.
This is done in customizing; IMG for MM > Purchasing>Conditions>Define Price Determination Process>Define Schema Determination>Determine Schema for Stock Transport Orders
For the combination of the Schema POrg; doc.type( UB ) and Supplying plant
you must specify the price schema to be used.
Hope this will solve your problem.
Regards,
DilliB

Delivery Split in Stock transfer Order

Hello gurus,
In Stock transfer order process, Delivery has been split. In purchase order we have two materials, while creating delivery in VL10B System is splitting the deliveries and creating two delivery no. instead of one delivery. I checked everything but i could not reach out the solution. can you tell me what could be reason for this delivery split in Stock Transfer Order Process.
Regards
Soumendu

SAP have provided a report ZLE_ANALYZE_DELIVERY_SPLIT in note 355404.
This report tells you exactly what is causing the split by highlighting the cause in red. It does not make any change to the database on your system (i.e. no changes are made on your system). I would recommend you implement this report.
Often, I have seen the delivery time being the cause of a delivery split. So check the values of LIKP-LFUHR for each delivery. But the above report would tell you exactly.

Error in stock transfer order

Hi everyone,
When I am doing MIGO ,In stock transfer order ,I am getting the following error,
"Excise Invoice cannot be captured for RG1(Finished Goods) material".
What should I do?
Regards
Prabudh

Hi Prabudh,
Can you come again with more details ?
Are you doing STO from Manufacturing plant to selling Plant (Depot) ?
Regards,
Gaurav Raghav.

Stock Transfer Order Report

Hi,
How to develop a Stock Transfer Order report. I also want to track the cost of transfer from one plant to another. Plz help.

Hi,
First fetch the data from LTAK header table. Based on this table you can
get the line items from LTAP table. You can have the list of all open TO's in this table. Based on the Plant (Werks) you can fetch the data from EKPO for STO report.
Reward if useful.....

Open Qty is not copied in Delivery for Stock Transfer Order

Hi,
In the Stock Transfer Order process, Once the STO Order is created, I am creating delivery in the transaction VL10B or VL10G.
When I am clicking the background button Delivery gets generated. Then when i am going in the transaction VL02N and increasing the delivery Quantity which is more than STO order quantity, the system is accepting it. But i want the system to throw an error message if the delivery quantity is more than the order qauntity. For this I have made the following settings.
In the Transaction Code 0VLP, i have selected B in Check Over Delivery field. But still it is not throwing an error.
The reason for the same may be, the system is not copying the Open Delivery Qty from the STO Order (Which normally happens in Sale Order to Delivery process, bcos of Copy Control). This field has 0 value. So the system is not able check for over delivery.
If I get this value in the delivery then it should be working fine and the sytem will throw an error for over delivery.
Can you please suggest me a way to get this open qty value in delivery for STO order or suggest me some other option to check for over delivery in STO.
Regards
Vijay

Dear Friend,
If I can understand you clearly.
to achieve your task the best way you can sit with your abaper and configure a routine and assign the same to T-code OVLK delivery type customizing :
In the Item requirement : Generally it is 202
reward points if helpful,
regards,
Amlan

Stock Transfer Order Scenario

Similar Messages

Maybe you are looking for