Stock transfer under quality type

Hi,
A material u2018X1u2019 was purchased six month before from external vendor.    At the time of procurement quality parameter was checked and material was transferred to unrestricted type. Now we want to sale or stock transfer of this raw material to other plant. Corresponding stock transfer order has been prepared.  Receiving plant want, after MIGO material status will be u201Cquality type u201C.  So that quality parameter further is re-checked.
Please explain step by step standard configuration.
Thanks & regards,
Amit Biswas

Hi Amit,
You can carry out inspection at receiving plant. Letu2019s assume A is supplying plant and B is receiving plant.
It does depend upon which movement type you use for inwarding the material in B plant.
1.     If you are doing one step transfer by 301 movement, then activate inspection type 08 in material master of B plant
2.     If you are inwarding by 101 movement, then activate inspection type 01 in material master of B plant
Regards,
Anand Rao
Edited by: Anand Rao on Aug 23, 2011 2:14 PM

Similar Messages

  • IDOC - message type WMMBXY(Stock transfer from quality to unrestricted)

    Hi Gurus,
    I have IDOC problem.
    Inbound message type WMMBXY(Stock transfer from quality to unrestricted), The status if I check in WM02 of Doc is "51-Application document not posted"
    Error Message ""Required function
    MB_CREATE_GOODS_MOVEMENT is not being processed".
    Please Help.
    Prashant

    Hi
    The Idoc whcile Posting using Message type WMMBXY calls the Function module L_IDOC_INPUT_WMMBXY & in turn this calls the function module MB_CREATE_GOODS_MOVEMENT.
    This function is not getting executed.
    Please check if the Movemnt type used is not active for WM movemnts.
    If you have used previously this movemnt type & now it is not working. Please take hlep of ABAPer  for debugging & finding the Root cause
    Thanks & Regards
    Kishore

  • Stock transfer 301 Movt Type

    Hi,
    I am doing Movt Type 301 Plant to Plant Stock transfer for unrestricted stock in one plant to another
    The materials has QM activated with 08 inspection Type Active. Control of IL is such that only one IL gets created for plant/sloc/batch
    After doing the first posting, I have done UD for the IL and posted stock to unrestricted. Then I tried to do multiple postngs to same sloc/batch
    For the subsequent postings, for some materials the stock gets posted to quality and for some it gets posted to unrestricted. What should be the normal behaviour
    What can be the reason

    Hi,
    Though I'm not sure I understood it correctly or not but seems you have issues with transfer postings (301 mvmnt with all QM active) and some of them goes to QI stock whereas others go to UR.
    If that's the case, I believe you should check your inspection set up and look for 'Post to insp stock' under inspection type 08.
    ntn

  • Stock Transfer to quality without Inspection lot creation

    Hi,
    I want to do stock transfer from unrestricted stock of Plant A to quality stock of Plant B. However I don't want inspection lot to be created.
    Is this possible?
    I am using Movement type 301 and Inspection Lot of type 08 is active in Material Master.
    If I deactivate QM for movement type, can I post to quality without inspection lot creation.
    Thanks

    Do you have any inspection type setup for material in plant B? If yes then you would be not able to transfer stock in QI without creating an inspection lot. If inspection type is active in material master of plant B(destination) then system would through you error message saying - "transfer stock in QM only". The reason is you would not have an option to move stock from QI using 321 (QI to UNR) in plant B if QM is active. 321 managed by an insp lot.
    If inspection type is not setup in material master at plant B then you would be able to post stock in QI without creating an inspection lot. Then move stock from QI to UNR using 321 (MB1B).
    Hope this clarify you.

  • Stock transfer in quality certificate

    Hi all,
      I have one question i have activated indicator stock transfer indicator " transfer posting and stock transfer order "
        I am transferinfg one batch from one plant A ( company codex) to another plant  B ( company code Y)
          Now the question is weather sysytem will consider this batch inspection data which in plant A while printing certificate for the from plant B
                       I know in case of stock transfer in same  company code it is possible but not 100 % confirm in case stock transfer within two different company codes
    ASD

    It depends on the set up of your COA profile.  If you have results coming from the inspection lot and you do not specify an inspection type in the COA profile header, then yes..it will.
    If you specified an 04 lot in the profile, then no, since the stock transfer lot should be an 08 inspection lot.
    Cert profiles are not plant specific so you can't specify an 08 inspection type.  Otherwise some shipments in plant A will fail to get a COA since it is possible that no 08 inspection lot will exist.
    Craig

  • Stock Transfer by movement type 301 referring STO

    Dear Experts,
    I am unable to generate a stock transfer referring an STO in MB1B or MIGO by movement type 301. I am successfully doing whenever I refer a Reservation. Please advice.
    Regards,,
    Subhro Chakravarty

    Hi,
    i have to ask you to read the SAP Documentation for 'Stock Transfer Using a Stock Transport Order'.
    It is explained there how to post a goods movement for STO.
    http://help.sap.com/erp2005_ehp_04/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm
    br, G

  • Stock transfer 352 mvt type reversal issue

    HI
    In mb11 t.code 352 trfr pstng to stock in transit from unrestr.-use - reversal system asking account determination entry
    1000 AUM __ 3000 not possible why system asking AUM Expense/revenue from stock transfer GL account in obyc.
    same  price in supplying and receiving plant in material master while mb11 t.code 351 mvt type accounting document inventory posting (BSX) GL account is taking my system,so during reversal in mb11 352 mvt type which GL i need to assign in Expense/revenue from stock transfer (AUM) Whether i need to assign inventory posting (BSX) GL or price difference GL account.(PRD)which GL i need to assign wt is reason.plz suggest.
    Regards
    Sam

    Hello,
    Go to FS00 --> 62000026 --> Click on the edit cost element button, it will take you to cost element screen. If you have a cost element , enter the same. Otherwise create a cost element with KA01, give G/L account and controlling area, save.
    Prase

  • Stock Transfer using movement type 309 of in-transit material

    Hi Gurus,
    We have a scenario where we want to post a 309 movement type on an intransit STO stock (sto is done from PWO, this is done to solve a SOX compliance problem). But it seems that this is not possible as the 309 can not be posted without a s. loc. Is there any alternative to this? Can a two step transfer using 313 and 315 do the trick? Please advise.
    Thanks

    In real life you cannot do anything to a material that is somewhere on the road, hence it is pretty limited what you can do in SAP.
    What exactly do you want to do?

  • Restricted stock used in intra-company stock transfer

    Hi,
    Can anyone give me the link about the description and difference between unrestricted stock, restricted stock and blocked stock?
    And for intra-company stock transfer(in one company code), I would like to post goods issue with restriced stock. and in inter-company stock transter and third-party sales, I would not like restricted stock to be used. How can I configure in system?
    Many thanks,
    Aries

    Hi Attila,
    Thank you for your informaiton.
    For different delivery types, such as LF, NLCC, NL, the checking rule are all the same. It is very unreasonalbe
    because for NL(stock transfer under one company code), we would like restricted stock used and for LF and NLCC, we only want unrestricted stock. Due to the same checking rule for all the delivery types, changing checking rule will not meet the requirements for all the types. If there is a customizing to set checking rules for different delivery types. If there is not, how can I do modification to meet our requirement?
    Many Thanks
    Aries

  • Stock Transfer Strategy

    Hi Experts,
    We are working on a project, where in we are transfereing a business from one  Plant in a contry  and opening a new Plant/Company code in a different country.
    Due to this , we need to transfer the stock liabbility of the old plant/ company code to the new company code.
    Need to Transfer the stock with quantity and its corresponding values
    What would be the optimum solution in achiving this ?
    We intend to do a LSMW with a Stock transfer under MB1A - is this a right solution or can be achivied better.
    Pointers welcome.

    HI,
    If you are going for transfer from Plant to Plant in different company code.
    Withdraw all the material in 562 movement type Mb1C.
    do the 561(MB1C) in the new company code.
    SAM

  • Delivery cost for Stcok transfer through M.type : 351

    Hi Experts,
    Can anybody explain how to capture the delivery costs for Stock transfer through M.Type 351.
    Also kindly explain the steps involved in configuration of the same.
    Thanks in advance,
    Prabu

    Hi,
    Once the Config releated to Setup stock transfer order is done.
    To include the cost you need to include the pricing procedure related to STO needs to be assigned to your schema group.
    Goto SPRO -MM-Purchasing -- Conditions
    Here you need to assign the Schema determination RM2000 to your Purchasing organization.
    Then when you create the STO in the recieiving plant, then you will get the condition tab in the item details of STO, there you can maintain the delivery costs for that material & send the STO to your supplying plant.
    Supplying plant will send the material through MB1B & with mvt type 351 to recieving plant.
    At the time of Goods reciept system will capture the delivery costs in the recieving plant for that STO.
    rgds
    gsc

  • Cross-company stock transfer with delivery function!

    Dear friends:
          I have a problem to borther u,I create stock transfer order with type 'NB',and then create delivery by T-CODE:VL10B with reference to the transfer order,but the log show the following error message:
       1030000484 000010 Sales unit  is not valid for item 000010
       Diagnosis
        The sales unit is not allowed for the material in item
        000010.
    System Response
        The system does not allow further processing of this item.
    Procedure
        Check your entry.
        Select a sales unit which is defined for the material in the
        material master record. Normally the sales unit will be
        determined immediately from the master master record.
    I really don't know how to deal it.
    thanks.

    UOM is in which stocks of the material are managed. The system converts all the quantities you enter in other units of measure to the base unit of measure.
    In the material master [MM02] check as to what is the base unit of measurement in the Sales Org1 tab and Purchasing tab. It seems that both these would be different as the system is not able to convert the UOM from Purchsing unit to the sales unit.
    Next, click the button for 'Additional data' [CTRL+F6], tab Unit of measure and enter the conversion for the UOM.
    For more details refer to the link below.
    <a href="http://help.sap.com/saphelp_46c/helpdata/en/ff/516a6749d811d182b80000e829fbfe/frameset.htm">UOM Details</a>
    In the link, follow the path Material Master Records-Additional Data-Units of measure.
    Regards,
    Gauravjit.
    Reward points if the solution is helpful

  • Material Ledger for Stock Transfer Postings

    Hi All,
    I have a question about the way material ledger is calculated for stock transfer postings (movement type 641). I will give an example to illustrate this issue:
    Material A has a Standard cost of $10
    Material B has a Standard cost of $8
    During the month 100 units were transferred from material A to Material B. This created a financial posting as follows:
    Credit Material A -          $1000                               
    Debit Material B -           $800
    Debit Price Difference    $200
    This price difference of $200 was used in the calculation of Actual cost for material B
    However, the Actual Cost for Material A was $9. I would have expected the system to use this actual cost to calculate the difference to be posted to material B. Hence the difference used in Material B should have been $100 {(9 – 8) X 100} and not $200.
    Has anyone had a similar issue, or know how the system resolves this (if at all)?
    Points will be rewarded for relevance.
    Thanks

    Dave, I see that your process is slightly different to mine. We do not revalue inventory at month end, instead the material ledger program posts the revalued amount to a reserve account and the actual cost is only a statistical entry. The material ledger calculation is reversed automatically in the new month and the standard price is used for valuation.
    I think this might make it difficult for the system to value STO's at actual. I may need to check with SAP.
    Thanks

  • In Stock Transfer PO, storage location should be RECP

    Hi,
    We have a requirement that when we make the Stock transfer PO, Order type is UB....then storage location should be RECP by default.
    Means in every STPO storage location should be RECP. They should go through RECP location and this should be not changeable..
    Please guide..

    Thanks dear...
    Our motto is not fulfilled from entering the storage location in material master MRP view in field "storage location EP". For this we have to maintain the Storage Location manually when creating STPO.
    But our requirement is that when we select the Stock Transfer Order - UB option in ME21N, storage location comes by default RECP and non changeable.  We don't want change Storage location in any cost.
    Plz. guide....

  • KANBAN Stock Transfer Question.

    Hi All,
    I am using kanban stock transfer stratergy(Mvmt type -311) to transfer my stock from one Sloc to another Sloc. I have given one fixed quantity and everytime that quantity is tranferred between sloc's. Now, My question is can give a tolerance limit to that kanban Quantity.
    For example, If my kanban quantity is 500 Pc's can I provide a tolerance limit of 10% so that I can transfer the stock anywhere between 450 and 550. Please let me know if this functionality is possible.
    Thanks in advance,
    Sushil

    Hi,
    As per standard SAP Practice , there is no provision of adding tolerance to Kanban Qty but you can replenish 450 /550 by manually editing the Kanban quantity in Kanban Correction.You can do Kanban correction in PK31n or directly by right click & selecting Kanban correction in Kanban Board screen.
    Other way is you can use Event driven Kanban for one time replenishment of 450/550 so that you need not disturb the main Control cycle of Classical Kanban.
    Even as per my knowledge, there is no BADI for Kanban which can help your requirement.So pls try above.
    Hope this helps.
    Revert if still any doubt.
    Regards,
    Tejas

Maybe you are looking for