Stock transfer using PICK LIST / PULL LIST

Hi Friend,
We have two storage locations in the plant say 1000 - Main store which is ware house managed and 2000 - Production storage location.
The goods issue needs to be done from production storage location 2000. How to transfer the material from 1000 - Main store which is ware house managed to 2000 - Production storage location using PICK LIST / PULL LIST concept.
Kindly give the solution.
Regards,
Narendra Bora

Hello Madhu,
If you can suggest me as well. I am moving the goods to production storage location from raw material storage lcoation,
While executing the MF60 it creates the reservation and display log
RMPU     stock transfer reservations 00000412 22.03.2010 created successfully
But does not move the goods using 311 movement type and stock is still in the raw material storage location.
2ndly in MMBE, if i found the stock in Produciton location, it shows me
Reserved                     20.000
GR blocked stock         20.000
Rcpt reservation          20.000
If you can enlighten me in this area please, Would it move the stock or I need to make some other steps also.
Regards,
JPS

Similar Messages

Non stock item on pick list

Hi
Only stock items get selected on to the pick slip as per the system behaviour
Is there any way we can set up non stock items to show on the pick list.
One of our customer has few non stock items which they want to show on the pick list at the time when the SO is created. They buy these items at times if a customer requires it and sell with other stock items.
Thank you
Regards
Apsara

Are you using Pick and Pack Manager / Sales Order itself as picklist.
As you would understand, only inventory items are recognized by the system as requiring to be picked. One of the ways could be to add a Text type row and enter the item number there.
Suda

2 Step Stock Transfer Using WM Transport Order??

Dear SAP expertes,
I have a problem, I think a lot of you too; that is stock transfer in 2 steps from one storage location to another (mov. types 313-315), but using o referencing a reservation.
SAP says that is not possible create reservations for 2 step stock transfer in MM, but also says use "Stock Transfer Orders" instead, that means use module WM.
Do anyone could transfer stock from one storage location to another using WM Stock Transfer Orders? I tried, but couldn't make it. In anyone have documention to do this I will appreciate it a lot.
Best regards,
Favio.

Hi Jürgen L.
I was checking SAP Note "28692 - MMIM: Reservation for a two-step stock transfer", and you were right, they say "Use the stock transport order instead of the stock transfer reservation".
I confused with WM stock tranfer order, but I want to ask you if you have used UB transport order between storage location of the same plant?
Best regards,
Favio.
Edited by: Favio Del Castillo on Sep 22, 2010 5:01 PM

G/l postings suring stock transfer using STO with delivery

Hi Guys
What are the G/L postings occur during A stock transfer between plant to plant inside the same company code. This is done using STO with sales delivery ( no sales order).
Thanks
Sam

It will be BSX Stock or Inv acc Dr. for the recv plant and BSX Stock or Inve acc Cr for the Supplying Plant if you are using 648 movemnt type in PGI .
No acc postings in MIGO GR when you will recv the goods in recv plant.
Regards
Sujoy

Stock Transfer using movement type 309 of in-transit material

Hi Gurus,
We have a scenario where we want to post a 309 movement type on an intransit STO stock (sto is done from PWO, this is done to solve a SOX compliance problem). But it seems that this is not possible as the 309 can not be posted without a s. loc. Is there any alternative to this? Can a two step transfer using 313 and 315 do the trick? Please advise.
Thanks

In real life you cannot do anything to a material that is somewhere on the road, hence it is pretty limited what you can do in SAP.
What exactly do you want to do?

Stock Transfer using 303 and 305

Hello
When we are doing stock transfer from 1plant to other plant and we have done 303 movement but 305 is yet to be done,at this instant whom does the stock belong in SAP.
Is it considered as stock in transit or in stock of receiving plant and where can I see it?
Regards

hi
when u transfer the stock in 303 the stock is placed in IN TRANSIT AND TRANSFER stock and the liability will be with receving plant
you can check this in MB52 stock statement
regards
kunal

Stock Removal using Pick Point

Hi all,
I have configure Storage Type 100 with SU managed and a pick point ST 001.
Once the TO is generated from delivery, the TO information will be from source ST100 to destination ST916.
So I would like to know, how to identify the SU is arrived pick point? If there any status or information can help me to know the status of TO.
Since i need to identify,
1.SU still in the Source Storage Type (TO open)
2.Worker starts transfer to SU to pick point with liftfork
3.SU arrived Pick point
4.Picker picked the material from pick point (TO picked)
5.Picker transferred the material to GI area (TO transferred and completed)
I dun know how to let user know the status of 2 and 3
Thanks in advance.
David Tai

Hi David,
If the pick point / ID point is defined for SType 100 then during transfer order creation system will automatically stamps the destination storage type as Pick point when it is taking out the stock from Stype 100
I have simulated one scenario where for my storage type 010 the ID point / Pick Point is defined as 011
Stock removal / putaway defined in material master & Stock in Storage bin are as below
& the Putaway / Picking storage type search is defined as
Now for the Transfer order creation i am using the T-Code LT09 (enter the SU number & MvT and system automatically propose 011 as destination storage type in the transfer order
Upon confirmation of the transfer order 0168, use LT09 again to transfer the SU from Pick point to final destination bin and system automatically propose 010 as the final destination storage type
Hope this helps

Stock Transfer using Two Step (QI & Block stock)

Hi All ,
Is it possible to receive material QI / Blocked stock of receiving plant ??
Another query is ... can I transfer QI / Block stock of supplying plant to another plant ??
I have a business case where I have to transfer QI stock from one plant to another Plant using two step.
Regards/
Suresh

Hi,
As a rule cross-plant stock transfers is done only through unrestricted-used stock only.
BR,
Krishna

Stock transfer using movtyp 541 an 542

Hi,
Stock is to be transfered from one storage to vendor using movtype 541 and 542. After using 541 stock is kept in transit using 541 and normally the system should
generate automatically a Movement Type 542 to move the
stock to vendor. .. But transfer of stock using 542 failed and stock is presenrly in transit.
So please tell me how to transfer this stock in transit to the vendor .
PLease help
Points will be rewarded
Thanks
Rohit

Hi Rohit,
You are talking about Subcontractiong process,
In Subcontracting first you create a Sub contracting PO with item L, then you do transfer Posting of your stock to vendor using 541Mvt for this PO, and once this subcontracting material is recieved through Mvt Type 101 there is an automatic consumption Mvt type 543 which will happen indicating the consumption of the subcontracting material.
there is no concept of stock in transit in Subcontracting.
542 Mvt is used as a reversal of 541 which will bring back the stock from vendor to your own stock.
Regards,
Vijay

Stock Transfer using Intransit plant

Experts,
We have a case where the material has to be transferred from Plant1 to Plant2. We also treat the Truck which carries the material from Plant 1 to Plant 2 as an in transit plant (say plant 3). Truck then delivers material to the Destination Plant. So we have 2 Stock Transfers here from Source Plant1 to Intransit Plant (Plant 3) and then from Intrasit Plant3 to Destination Plant2.
How would we create excise invoice in this case. The main reason for creating an intransit plant is that the carrier may be used to deliver the material to different destination plants
Will creating a manual Excise Invoice using J1IS would serve the purpose

The Business is Oil Down stream...Plant 3 is the truck which carries Oil from Refinery (Plant 1 ) to Depot (Plant 2)...
The reason behind this is the Same Oil truck would despatch Oil to 2 or more depots...
My question is about the Excise Invoice making ...refer my first posting
This is already implemented in other countries and we need to apply this for India.

Can't create stock transfer using DI Server

Hi Experts,
I need a very urgent help from you guys.
I was creating an inventory transfer document with batch numbers by using DI Server, Each time it gives me error "10000559 - Not enough data".
I am using following soap string.
Thanks in advance for the help
<?xml version="1.0" encoding="UTF-16"?>
<env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope">
<env:Header>
    <SessionID>6BD16887-E595-41B0-A6D2-D730DFA07B55</SessionID>
</env:Header>
<env:Body>
    <dis:AddObject xmlns:dis="http://www.sap.com/SBO/DIS">
      <BOM>
        <BO>
          <AdmInfo>
            <Object>oStockTransfer</Object>
          </AdmInfo>
          <Documents>
            <row>
              <CardCode>V00204</CardCode>
            </row>
          </Documents>
          <Document_Lines>
            <row>
              <ItemCode>Raw Colostrum</ItemCode>
              <WarehouseCode>TANK1</WarehouseCode>
              <Quantity>2.5</Quantity>
              <FromWarehouseCode>FREEZER1</FromWarehouseCode>
            </row>
          </Document_Lines>
          <BatchNumbers>
            <row>
              <BatchNumber>140505155901743</BatchNumber>
              <Quantity>2.5</Quantity>
              <BaseLineNumber>0</BaseLineNumber>
            </row>
          </BatchNumbers>
        </BO>
      </BOM>
    </dis:AddObject>
</env:Body>
</env:Envelope>

Hi Ritu,
I don't know exactly what the problem is, but the following xml is working for me ( using StockTransferService):
<?xml version="1.0" ?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <soap:Header>
        <MsgHeader xmlns="http://www.sap.com/SBO/DIS">
            <SessionID>87CC6D32-2724-49EA-BD30-EA6DD1F0810C</SessionID>
            <ServiceName>StockTransferService</ServiceName>
        </MsgHeader>
    </soap:Header>
    <soap:Body>
        <Add xmlns="StockTransferService">
            <StockTransfer xmlns="http://www.sap.com/SBO/DIS">
                <FromWarehouse>01</FromWarehouse>
                <ToWarehouse>02</ToWarehouse>
                <StockTransferLines>
                    <StockTransferLine>
                        <ItemCode>B10000</ItemCode>
                        <Quantity>1</Quantity>
                        <WarehouseCode>02</WarehouseCode>
                        <BatchNumbers>
                            <BatchNumber>
                                <BatchNumber>B1-00067</BatchNumber>
                                <Quantity>1</Quantity>
                                <BaseLineNumber>0</BaseLineNumber>
                            </BatchNumber>
                        </BatchNumbers>
                    </StockTransferLine>
                </StockTransferLines>
            </StockTransfer>
        </Add>
    </soap:Body>
</soap:Envelope>
regards,
Maik

Pick List with Non Stock Items

Is there anyway to edit the Pick List so that it displays Non Stock Items?
Our client does not want to track certain Items as Stock and as such they are all created as Non Stock. The Pick List is required to show that stores that the Non Stock Items are included, however they are not displayed.

Hi Kevin,
As the name suggests, the Pick list will only work for Items which are Inventory Items. A non inventory item is not recoganized to have the need to be picked.
Therefore a NON-INVENTORY Item cannot be made to print / be available on the Pick List.
Suda

Stock Transfer by movement type 301 referring STO

Dear Experts,
I am unable to generate a stock transfer referring an STO in MB1B or MIGO by movement type 301. I am successfully doing whenever I refer a Reservation. Please advice.
Regards,,
Subhro Chakravarty

Hi,
i have to ask you to read the SAP Documentation for 'Stock Transfer Using a Stock Transport Order'.
It is explained there how to post a goods movement for STO.
http://help.sap.com/erp2005_ehp_04/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm
br, G

Intracompany stock transfer-value stock transfer by adding freight charges?

Hi
We want to setup an intracompany stock transfer using purch.doc type UD - with delivery processing.
By standard configuration when I post the goods issue in the delivering plant it value the material movement by using the price from the delivering plant.(MAP/Standard price - whichever applies according to price control)
How can we uplift this with a freight or service charge?
I have checked the pricing procedure RM2000 "Stock Transfer Document" which is assign to purchase document type UD in standard. This pricing schema allows in the stock transport order to enter freight conditions FRB1 and FRC1 which is exactly what we want.
However, when posting the goods issue now in the delivering plant, SAP complains that it can't post the accruals for FR1. The error message indicates that no account was found. Having checked OMWB though, the MM account determination is complete. I suspect the problem is the value string attached to movement type 641 which doesn't allow freight clearing/provisions at all....
Anyone an idea?
Bjoern

Hi ,
STOs can very well handle freight costs :
You can create new freight / delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08
also assign the Accrual Key to this and do the Account Detrmination for this Accrual Key in OBYC
If your MAP in sending plant is 100 and freight in 10
At the time of PGI, following accounting entry will get generated;
Stock A/c - Dr - 110 (Receiving Plant)
Stock A/c - Cr - 100 (Supplying Plant)
Freight Clearing A/c - Cr - 10 (Supplying Plant)
Reg
Dheeraj

Stock Transfer for Assets Item

Hi MM guru's
what is the procedure for stock transfer in SAP for assets (Plant to Plant)
Thanks in advance

Hi there,
If the stock you can see in MMBE you can go for plant to plant stock transfer using MB1B movement type 301
if you cant see the stock that means you have received the material from PO having account assignment category A which says it is an asset.
Now for that you have to go for the asset to asset (Asset code to Asset code ) create an asset code in the reciving plant and transfer through FI module path. Just consult your FI consultant for the same.
Rewards if helpfull
Regards
Sujoy

Stock transfer using PICK LIST / PULL LIST

Similar Messages

Maybe you are looking for