Stock transfter Sch. Agreement not taken for Planning

Dear Experts
My scenario is like this,
I have two plants A and B. I will be creating Stock transfer Purchase order at B and the material will be sent from A to B thro' STO process.
When i create Stock Transfer Purchase order thro' ME21N at B,
I am able to see the requirement in MD04 at plant A.
But when I create a Stock Transport Scheduling agreement by ME37.
I am not able to see that in my Stock requirements list and it is not taken for MRP run also.
My requirement is when i create a stock transport sch. agreement, the system should show it in MD04 at Plant A and it should be included in the MRP.
Please tell me what settings need to be done.
Thanks & Regards
Bala
Whereas when i create Stock Transfer Purchase Order,

Dear,
Check your delivery schedule line dates, if you have maintained in future then it will not allow to create the delivery.
Also check your scheduling agreement is released document.
Did you maintain the MRP data in the material master for this mateiral and special procurement key needs to be maintained for this mateiral in MRP 2 view (from plant)?
Normal process from One Plant to Aonther Plant
1 Go to ME31 enter the supplying Plant and other details
.2 In the next scree enter material ,qty and save
STO no is created
3. Use MB1B enter the movement type : 351 and enter all the details and save. Send the material to the other plant with documents
4. Receive the material in the othe plant in Mov 101
5. use MB5T to see the material -STOCK in transit
Regards,
R.Brahmankar

Similar Messages

After upgrade to 11.1.1.2 Agreement not found for trading partners

We just upgraded from 11.1.1.1 to 11.1.1.2 and an existing composite that sends a file from Oracle EBS to an outside trading partner is not working.
We tried importing the Agreement from the 11.1.1.2 and when it did not work, we purged the repository and started from scratch.
The error we are getting is:
Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND
This is a file that we are sending from Oracle EBS to an outside trading partner via FTP.
One thing we are noticing is that when we create the agreement, it does not show up under our host TP, it only shows up under the target TP.
We have set up the TP, Channel, and agreements exactly like they are set in the 11.1.1.1 environment.
Here is the log file in debug mode.
[2010-06-17T07:40:10.471-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.engine.Engine:handleOutboundException notifying App
[2010-06-17T07:40:10.471-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: notifyApp: Enter
[2010-06-17T07:40:10.479-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: notifyApp: payload = <Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">[[
<correlationId>7F00000112945B5769F00000AEC3D2E0</correlationId>
<b2bMessageId>10011</b2bMessageId>
<errorCode>B2B-50547</errorCode>
<errorText>
<![CDATA[Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
]]>
</errorText>
<errorDescription>
<![CDATA[Machine Info: (afsmlnx04.rheem.com)
Description: Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
[2010-06-17T07:40:10.486-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: notifyApp: Enqueue the exception message:[[
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>7F00000112945B5769F00000AEC3D2E0</correlationId>
<b2bMessageId>10011</b2bMessageId>
<errorCode>B2B-50547</errorCode>
<errorText>
<![CDATA[Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
]]>
</errorText>
<errorDescription>
<![CDATA[Machine Info: (afsmlnx04.rheem.com)
Description: Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
[2010-06-17T07:40:10.492-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: deliverException: Send message to endpoint IP_IN_QUEUE
[2010-06-17T07:40:10.492-04:00] [soa_server1] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: log] URL ===== aq://IP_IN_QUEUE@jdbc/SOADataSource
[2010-06-17T07:40:10.514-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.transport.AppTransportInterface:send TO Endpoint: 509 aq://IP_IN_QUEUE@jdbc/SOADataSource
[2010-06-17T07:40:10.522-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] TransportProperties.TransportProperties():internal=true;aq.sender.queue_name=IP_IN_QUEUE;aq.sender.datasource=jdbc/SOADataSource;aq.sender.queue_payload_col=PAYLOAD;aq.sender.recipients=b2berroruser;
[2010-06-17T07:40:11.356-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.transport.AppTransportInterface:send Message Successfully Transmitted
[2010-06-17T07:40:11.377-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.msgproc.MessageHandler:findInvocationContext trying doc ref
[2010-06-17T07:40:11.396-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: notifyApp: Exit
[2010-06-17T07:40:11.396-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.engine.Engine:handleOutboundException Updated the Error Message Successfully: Error -: B2B-50547: Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
[2010-06-17T07:40:11.397-04:00] [soa_server1] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: log] class oracle.tip.b2b.metric.B2BMessageProperties[[
fromTP : Rheem
toTP : JPMorgan
DocumentProtocol : null
DocumentProtocolVersion : null
DocumentType : JPPositivePay
Agreement : null
MessageSize : 0.0
MessageState : ERROR
FromEndpoint : null
FromEndpointProtocol : null
FromEndpointStatus : null
ToEndpoint : null
ToEndpointProtocol : null
ToEndpointStatus : null
Application : null
Application : null
Composite : null
CompositeVersion : null
Service/Reference : null
]]

In another thread Nitesh states:
b2b.documentProtocolVersion is missing in your properties and b2b.toTradingPartnerId is not set properly.
Below are the property, you should set in composite:
b2b.documentTypeName = <doctype>
b2b.documentProtocolVersion = <docRevision>
b2b.fromTradingPartnerId = <HostTPName>
b2b.toTradingPartnerId = <RemoteTPName>
b2b.messageType = <msgType>
If you want to identify TP based on Identifier then use below for TP:
b2b.toTradingPartnerId = <AS2 Identifier Value>
b2b.toTradingPartnerIdType = <AS2 Identifier>
We are setting the b2b.documentProtocolVersion variable in BPEL:
[2010-06-17T07:40:05.294-04:00] [soa_server1] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: orabpel.invoke.pool-3.thread-11] [userId: <anonymous>] [ecid: 0000I_5hM0hFw000jzwkno1C6FTd0000GQ,0:1:100000028] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [composite_name: RHMAPPositivePayService] [component_name: enquedat] [component_instance_id: 10011] [SRC_METHOD: log] [composite_instance_id: 10011] class oracle.integration.platform.blocks.b2b.B2BReference : oracle.integration.platform.blocks.b2b.B2BReference@8fdf1b3 : Key : b2b.documentProtocolVersion
[2010-06-17T07:40:05.294-04:00] [soa_server1] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: orabpel.invoke.pool-3.thread-11] [userId: <anonymous>] [ecid: 0000I_5hM0hFw000jzwkno1C6FTd0000GQ,0:1:100000028] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [composite_name: RHMAPPositivePayService] [component_name: enquedat] [component_instance_id: 10011] [SRC_METHOD: log] [composite_instance_id: 10011] class oracle.integration.platform.blocks.b2b.B2BReference : oracle.integration.platform.blocks.b2b.B2BReference@8fdf1b3 : Value : 1
Edited by: robn77 on Jun 17, 2010 5:27 AM

Agreement not found for trading partners:FromTP HostParty, ToTP RemoteParty

Hi,
I have setup host partner and trading partner by importing CPA. I am trying to generate outbound message on Listening Channel(JMS_OUT_Queue). I am using custom Java Implementation relying on weblogic client jar to produce messages on this JMS_OUT_Queue.
My Messages are properly produced by java application and consumed by Oracle B2B. but they all fail as agreement could not be found.
Agreement not found for trading partners: FromTP HostParty, ToTP RemoteParty with document type ACTION:action1 Service:service1 ServiceTypestring-OUTBOUND.
I am setting below JMS Header properties.
1.FromRole
2.ToRole
3.FROM_PARTY_ID_TYPE
4.TO_PARTY_ID_TYPE
5.SERVICE
6.ACTION
7.FROM_PARTY
8.TO_PARTY
9.SERVICETYPE
I have tried lot of permutations and combinations with JMS Header properties, no matter what I do, Agreement is not picked up and message fails.

Thanks Anuj. I made it work by passing document version and id as JMS headers.
Earlier I was setting action header as "ACTION=action1", I will try by modifying it as "ACTION_NAME=ACTION:action1".
*<UPDATE>: I tried it, still not working.*
Error: Machine Info: (apl08316uaapp01) Description: Agreement not found for trading partners: FromTP HostParty, ToTP RemoteParty with document type ACTION:rsProcessLineAvailabilityRequest Service:bcRequestLineAvailabilityv14 ServiceTypestring-OUTBOUND.
JMS Header:
JMSXDeliveryCount=1, MSG_ID=ID:<457648.1369731952449.0>, FROM_PARTY_ID_TYPE=urn:oasis:names:tc:ebXML-cppa:partyid-type:duns, Sequencing=false, ACTION_NAME=ACTION:rsProcessLineAvailabilityRequest;SERVICE:bcRequestLineAvailabilityv14;SERVICETYPE:string, FROM_PARTY=DUNS_ID_OF_HP, TO_PARTY_ID_TYPE=urn:oasis:names:tc:ebXML-cppa:partyid-type:duns, TO_PARTY=DUNS_ID_OF_TP
regards,
Ashay T.
Edited to Remove Organization Specific Info

Trading partner agreement not found for the given input values

Hi,
I am working on EDI X12 over generic exchange outbound.
In enqueue script:
replyToMsgID =
from =TEE
to =RF
actionName =BASFEDI841
doctypeName =841
doctypeRevision =4010
msgType =1
payload =RF_841_4010_1_12.xml
attachment=
I am getting the Trading partner agreement not found.
B2B log:
***** REQUEST MESSAGE *****
Exchange Protocol: Generic Version 1.0
Transport Protocol: FTP
Unique Message ID: TEE_2009Mar01_15_37_29_170.dat
Trading Partner: RF
Message Signed: No
Payload encrypted: No
Information incomplete
2009.03.01 at 15:37:29:477: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage Exit
2009.03.01 at 15:37:29:477: Thread-20: B2B - (DEBUG) DBContext commit: Enter
2009.03.01 at 15:37:29:477: Thread-20: B2B - (DEBUG) DBContext commit: Leave
2009.03.01 at 15:37:29:478: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Exit
2009.03.01 at 15:37:32:910: Thread-21: B2B - (DEBUG)
Protocol = FTP
Version = 1.0
Transport Header
filename:TEE_2009Mar01_15_37_29_170.dat
filesize:7787
file_ext:dat
fullpath://users/dab2b01/RF841/TEE_2009Mar01_15_37_29_170.dat
timestamp:1970-01-01T00:00:00.000-00:00
2009.03.01 at 15:37:32:973: Thread-21: B2B - (DEBUG) DBContext beginTransaction: Enter
2009.03.01 at 15:37:32:974: Thread-21: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2009.03.01 at 15:37:32:974: Thread-21: B2B - (DEBUG) DBContext beginTransaction: Leave
2009.03.01 at 15:37:32:974: Thread-21: B2B - (DEBUG) InterfaceListener:onMessage - Invoke inbound callout - null - null
2009.03.01 at 15:37:32:975: Thread-21: B2B - (DEBUG) InterfaceListenersyncAckEBMSchecking header names
2009.03.01 at 15:37:32:975: Thread-21: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Enter
2009.03.01 at 15:37:32:998: Thread-21: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Exit
2009.03.01 at 15:37:32:999: Thread-21: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.InterfaceListener:onMessage sendEventtrue
2009.03.01 at 15:37:33:005: Thread-21: B2B - (DEBUG) DBContext commit: Enter
2009.03.01 at 15:37:33:011: Thread-21: B2B - (DEBUG) DBContext commit: Transaction.commit()
2009.03.01 at 15:37:33:011: Thread-21: B2B - (DEBUG) DBContext commit: Leave
2009.03.01 at 15:37:33:012: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Enter
2009.03.01 at 15:37:33:013: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Enter
2009.03.01 at 15:37:33:013: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2009.03.01 at 15:37:33:013: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Leave
2009.03.01 at 15:37:33:014: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processEvents Enter
2009.03.01 at 15:37:33:014: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processEvents begin transaction
2009.03.01 at 15:37:33:015: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Enter
2009.03.01 at 15:37:33:015: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Leave
2009.03.01 at 15:37:33:015: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleMessageEvent Enter
2009.03.01 at 15:37:33:015: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:incomingContinueProcess Enter
2009.03.01 at 15:37:33:015: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:getWireMessage Enter
2009.03.01 at 15:37:33:019: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:getWireMessage Exit
2009.03.01 at 15:37:33:020: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:formTransportMessage Enter
2009.03.01 at 15:37:33:027: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:formTransportMessage Exit
2009.03.01 at 15:37:33:028: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Enter
2009.03.01 at 15:37:33:042: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Identify Business Protocol
2009.03.01 at 15:37:33:042: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Do Unpack using the BP specific package class
2009.03.01 at 15:37:33:043: Thread-20: B2B - (DEBUG) MimePackaging:unpack:Enter
2009.03.01 at 15:37:33:043: Thread-20: B2B - (DEBUG) MimePackaging:doUnpack:Enter
2009.03.01 at 15:37:33:044: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Enter
2009.03.01 at 15:37:33:044: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:encoding = UTF-8
2009.03.01 at 15:37:33:045: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:oracle.tip.adapter.b2b.packaging.Component@8a2023
2009.03.01 at 15:37:33:045: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Exit
2009.03.01 at 15:37:33:046: Thread-20: B2B - (DEBUG) MimePackaging:unpack:Exit
2009.03.01 at 15:37:33:046: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Decode the Incoming Message into B2B Message
2009.03.01 at 15:37:33:046: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Enter
2009.03.01 at 15:37:33:046: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Number of Components = 1
2009.03.01 at 15:37:33:047: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage Transport Protocol = {FTP}
2009.03.01 at 15:37:33:047: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage filename = TEE_2009Mar01_15_37_29_170.dat
2009.03.01 at 15:37:33:048: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = FROM_PARTY - TEE
2009.03.01 at 15:37:33:048: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage File TP Host name = TEE
2009.03.01 at 15:37:33:048: Thread-20: B2B - (DEBUG) calling setInitiatingPartyId() changing from null to TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:048: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage fromParty = TEE
2009.03.01 at 15:37:33:048: Thread-20: B2B - (DEBUG) calling setFromPartyId() changing from null to TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:049: Thread-20: B2B - (DEBUG) calling setToPartyId() changing from null to TPName: null Type: null Value: null
2009.03.01 at 15:37:33:049: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage security info NULL
2009.03.01 at 15:37:33:056: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Exit
2009.03.01 at 15:37:33:056: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage Enter
2009.03.01 at 15:37:33:056: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage toTP null
2009.03.01 at 15:37:33:057: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage hubUrl null
2009.03.01 at 15:37:33:057: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage Exit
2009.03.01 at 15:37:33:057: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage ProtocolCollabId = null
2009.03.01 at 15:37:33:057: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage CollaborationName null
2009.03.01 at 15:37:33:057: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate Enter
2009.03.01 at 15:37:33:058: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate check non-RosettaNet Message
2009.03.01 at 15:37:33:060: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate Exit
2009.03.01 at 15:37:33:060: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Protocol Collaboration Id : null
2009.03.01 at 15:37:33:060: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument Enter
2009.03.01 at 15:37:33:063: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:preProcessor enter
2009.03.01 at 15:37:33:064: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:preProcessor edi = X12
2009.03.01 at 15:37:33:064: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:preProcessor segment delimiter is 27
2009.03.01 at 15:37:33:073: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument preprocess result =
ISA~00~Authorizat~00~Security I~01~Interchange Sen~01~Interchange Rec~090301~1935~U~00401~000001101~0~I~+'GS~SP~Application Sen~Application Rec~20090301~1537~1101~T~004010'ST~841~5709'SPI~00~01~Reference Identification~Entity Title~Entity Purpose~A~00~01~00~10~Source Subquali~773~1~AA~0001'RDT~A~Revision Value~001~~~01'RDT~A~Revision Value~001~~~01'RDT~A~Revision Value~001~~~01'RDT~A~Revision Value~001~~~01'NTE~AAA~Description'X1~C~Export Licen~C~~1~1~COU~SCHEDULE B~D~252876~59154.0269~A~01~8~U~Identification Code'X2~Import License Number~~20090301~~20090301~20090301'X7~Free-Form Message~Free-Form Message'AMT~1~1~C'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'DTM~001~~~01~CC~Date Time Period'PER~1A~Name~AA~Communication Number~AA~Communication Number~AA~Communication Number~Contact Inquiry Refe'N1~01~Name~1~Identification Code~01~01'N2~Name~Name'N3~Address Information~Address Information'N4~City Name~ST~POSTAL CODE~COU~A~Location Identifier'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'PER~1A~Name~AA~Communication Number~AA~Communication Number~AA~Communication Number~Contact Inquiry Refe'HL~1~~1~0'SPI~00~01~Reference Identification~Entity Title~Entity Purpose~A~00~01~00~10~Source Subquali~4~1~AA~0001'RDT~A~Revision Value~001~~~01'PRR~Assigned Identificat~10~Source Subquali~BRK~Description~10~Source Subquali~A~10~Source Subquali~1'PRT~EXC~10~Source Subquali~N'PRS~1~Description'LIN~Assigned Identificat~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID'PER~1A~Name~AA~Communication Number~AA~Communication Number~AA~Communication Number~Contact Inquiry Refe'MSG~Free-Form Message Text~AA~3'N1~01~Name~1~Identification Code~01~01'N2~Name~Name'N3~Address Information~Address Information'N4~City Name~ST~POSTAL CODE~COU~A~Location Identifier'PER~1A~Name~AA~Communication Number~AA~Communication Number~AA~Communication Number~Contact Inquiry Refe'N9~01~Reference Identification~Free-form Description~~~01~01+Reference Identification+01+Reference Identification+01+Reference Identification'PID~F~01~10~Product Desc~Description~1S~Source Subquali~N~LAN'PKD~AMM01~Source Subquali~10~Packagi~L'QTY~01~1~01+3+60.42665+01+5+3+01+1+51887.5+01+6+7.79+01+2+3953.97808'MEA~9L~1~6~01+5+56318.8+01+1+30.72+01+1+1+01+7+8887.19467+01+6+661.97698~6~7~01~~1S~BM'MEA~9L~1~5~01+3+696.4+01+4+4+01+3+1221.27922+01+1+994232.001+01+3+872.859~3~9~01~~1S~BM'MEA~9L~1~3~01+8+8+01+1+7.75+01+2+6.395+01+1+2.1+01+6+7.59~6~4~01~~1S~BM'MEA~9L~1~6~01+6+7393.71+01+3+54258.8579+01+8+28012.940+01+5+8+01+7+8.8~9~9~01~~1S~BM'MEA~9L~1~8~01+5+8661152.98+01+7+6356848.72+01+7+1010847.39+01+5+4939.33859+01+3+7.84050~8~4~01~~1S~BM'UIT~01+7+8.3+01+2+8.702047+01+8+323.16049+01+8+40699.4+01+5+30.909~1~AA'LOC~01~Reference Identification~Description~Reference Identification~Catego~01~Reference Identification~Description~Reference Identification~6~01+7+257.30155+01+1+963640.085+01+1+9.42+01+4+1+01+3+67.61~8~01+6+3.6+01+2+20.5+01+4+6.99+01+7+5+01+5+213.507492~5~01+2+3077486.5+01+7+78023.621+01+3+6.74+01+7+138554.0+01+3+4111.4~2~01+9+2.6+01+8+91290.0173+01+9+1.9+01+2+6.168+01+1+26.9~2~01+2+1+01+6+67348.246+01+4+8.50+01+7+37.63+01+5+130691508.0~1~01+5+8.39+01+1+2.0+01+6+7.3+01+5+173.68084+01+5+550.4928~01~Reference Identification~Description'PWK~01~1~26~01~1~Identification Code~Description~1+1+1+1+1~AR'PKG~F~01~10~Packagi~Description~01'MEA~9L~1~6~01+9+99.2217+01+5+6.5043+01+8+30.76+01+9+3+01+1+7~3~2~01~~1S~BM'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'DTM~001~~~01~CC~Date Time Period'PER~1A~Name~AA~Communication Number~AA~Communication Number~AA~Communication Number~Contact Inquiry Refe'LX~6'LIN~Assigned Identificat~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID'TMD~01~10~Product Desc~01~01~Description~~Reference Identification~Source Subquali'MEA~9L~1~4~01+7+71.1+01+2+277.0+01+2+9.19003+01+1+901.516+01+3+7803582.87~8~7~01~~1S~BM'PSD~01~01~9661549~01+2+140318.0112+01+3+30.74740+01+9+67.17+01+7+5.1130+01+3+56743.0~01~01~01~Description'SPS~193487350~66823328~472426~5.6~01+3+519.45554+01+6+145146.03+01+2+63994262.5+01+3+1.3166+01+8+4.7~440443'DTM~001~~~01~CC~Date Time Period'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'EFI~00~Free-Form Message Text~9A~Version Identifier~Program Identifier~Version Identifier~Interchange Format~Version Identifier~Compression Technique~A0~File Name~Bloc~7~84410~Version Identifier~ASB'BIN~3~hii'CID~1~01~10~Product Desc~Description~Source Subquali~N'UIT~01+6+940.5+01+3+4.7+01+9+3.1+01+6+58.1+01+2+115728.9010~3~AA'TMD~01~10~Product Desc~01~01~Description~~Reference Identification~Source Subquali'PSD~01~01~595~01+1+5.139+01+3+1+01+5+4+01+5+19.1+01+5+3441.57231~01~01~01~Description'CSS~GC~01+1+33832819.6+01+1+1.5332+01+5+1.1+01+1+12173.83+01+5+813.282453~874~27~1~2~38'SPS~9~1154210~75~9.5~01+2+473.9+01+5+28.394421+01+6+755.69932+01+3+8407.2+01+3+1~54261910'MSG~Free-Form Message Text~AA~66511'MEA~9L~1~3~01+6+4.979+01+8+60.167241+01+8+48.03003+01+1+1.6086+01+5+2417168.92~3~1~01~~1S~BM'DTM~001~~~01~CC~Date Time Period'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'STA~01~9~01+6+66133.5+01+1+1+01+6+45813032.4+01+3+3329.6+01+7+63878.29~1~9L~3~5~01'DTM~001~~~01~CC~Date Time Period'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'CRF~01+6+7050.3+01+3+892.07605+01+6+847.7520+01+7+4+01+4+1.7~59.926'LS~CID'CID~1~01~10~Product Desc~Description~Source Subquali~N'MEA~9L~1~1~01+2+316324.35+01+8+852.8+01+7+4.2+01+8+6.3+01+7+9.3~2~4~01~~1S~BM'STA~01~6~01+2+751.60984+01+2+5+01+7+60.63+01+3+5366069.5+01+7+1.891~1~9L~1~8~01'LE~CID'EFI~00~Free-Form Message Text~9A~Version Identifier~Program Identifier~Version Identifier~Interchange Format~Version Identifier~Compression Technique~A0~File Name~Bloc~2~64~Version Identifier~ASB'BIN~3~hii'SE~91~5709'GE~1~1101'IEA~1~000001101'

.... b2b.log:
2009.03.01 at 15:37:33:077: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl Enter
2009.03.01 at 15:37:33:078: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl validateEnvelope = false
2009.03.01 at 15:37:33:078: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl Leave
2009.03.01 at 15:37:33:078: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Enter
2009.03.01 at 15:37:33:079: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Return = oracle.tip.adapter.b2b.document.edi.ISelectorImpl@43da1b
2009.03.01 at 15:37:33:085: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = SeverityConfig
2009.03.01 at 15:37:33:085: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = null
2009.03.01 at 15:37:33:107: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeSenderID Val = Interchange Sen
2009.03.01 at 15:37:33:108: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeSenderQual Val = 01
2009.03.01 at 15:37:33:108: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode standard = X12
2009.03.01 at 15:37:33:108: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeReceiverID Val = Interchange Rec
2009.03.01 at 15:37:33:109: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeControlVersion Val = 00401
2009.03.01 at 15:37:33:109: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeReceiverQual Val = 01
2009.03.01 at 15:37:33:109: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode Group Key = GroupSenderID Val = Application Sen
2009.03.01 at 15:37:33:110: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode X12 Doc Revision : 004010
2009.03.01 at 15:37:33:110: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode X12 Doc Revision : 4010
2009.03.01 at 15:37:33:110: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode Group Key = GroupReceiverID Val = Application Rec
2009.03.01 at 15:37:33:110: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode Transaction Count = 1
2009.03.01 at 15:37:33:111: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode DocType = 841
2009.03.01 at 15:37:33:111: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeReceiverQual = 01
2009.03.01 at 15:37:33:112: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeSenderID = Interchange Sen
2009.03.01 at 15:37:33:112: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeReceiverID = Interchange Rec
2009.03.01 at 15:37:33:112: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter GroupReceiverID = Application Rec
2009.03.01 at 15:37:33:112: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeControlVersion = 00401
2009.03.01 at 15:37:33:113: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter GroupSenderID = Application Sen
2009.03.01 at 15:37:33:113: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeSenderQual = 01
2009.03.01 at 15:37:33:113: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument exit
2009.03.01 at 15:37:33:113: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate Enter
2009.03.01 at 15:37:33:113: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate msginfo reftomsgid is null, nothing to correlate
2009.03.01 at 15:37:33:114: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate Exit
2009.03.01 at 15:37:33:114: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage number of b2b messages 1
2009.03.01 at 15:37:33:114: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage msgtype = 1
2009.03.01 at 15:37:33:115: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processIncomingTPA() Begin TPA Processing..
2009.03.01 at 15:37:33:115: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (before calling processParty) :
initial : null
from : TPName: TEE Type: null Value: null
to : TPName: null Type: null Value: null
final : null
initiating : TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:115: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() direction is incoming
2009.03.01 at 15:37:33:115: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() calling processparty with : TPName: null Type: null Value: null
2009.03.01 at 15:37:33:116: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:processParty() Begin..
2009.03.01 at 15:37:33:119: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() after calling processparty : TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:119: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (after calling processParty):
initial : null
from : TPName: TEE Type: null Value: null
to : TPName: TEE Type: null Value: null
final : null
initiating : TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:120: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() docTypeName: 841 docTypeRevision: 4010
2009.03.01 at 15:37:33:127: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() actionName: BARFEDI841 actionRevision: 1.0
2009.03.01 at 15:37:33:127: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:getCollaborationDetails() Begin.. Activity Name : BARFEDI841 Activity Version: 1.0
2009.03.01 at 15:37:33:131: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() eventName:<BARFEDI841>
2009.03.01 at 15:37:33:131: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() messageType:1
2009.03.01 at 15:37:33:136: Thread-20: B2B - (DEBUG) calling setMode() changing from -1 to 2
2009.03.01 at 15:37:33:137: Thread-20: B2B - (DEBUG) calling setInitiatingPartyId() changing from TPName: TEE Type: null Value: null to TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:137: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() cpaID=null
2009.03.01 at 15:37:33:137: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() TPA Name : null
2009.03.01 at 15:37:33:137: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() TPA Name : null
2009.03.01 at 15:37:33:138: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA() Begin..
2009.03.01 at 15:37:33:138: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA()
From Party -> null-null-TEE-null To Party -> null-null-TEE-null Business Action name -> BARFEDI841
2009.03.01 at 15:37:33:138: Thread-20: B2B - (DEBUG) RepoDataAccessor:getAgreementNameByBaTPName() Begin..
2009.03.01 at 15:37:33:138: Thread-20: B2B - (DEBUG) RepoDataAccessor:getAgreementNameByBaTPName() fromParty: TPName: TEE Type: null Value: null toParty: TPName: TEE Type: null Value: null initiatingParty: TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:139: Thread-20: B2B - (DEBUG) RepoDataAccessor:getAgreementNameByBaTPName() SELECT ag.name FROM TIP_BusinessAction_ra ba1, TIP_Party_ra tp1, TIP_BusinessAction_ra ba2, TIP_Party_ra tp2, TIP_SupportedBusinessAction_ra sba1, TIP_SupportedBusinessAction_ra sba2, TIP_Participant_ra tpp1, TIP_Participant_ra tpp2, TIP_Agreement_ra ag WHERE tp1.name = ? AND ba1.name = ? AND ba1.revision = ? AND sba1.isinitiator = ? AND tpp1.agreement = ag.ID AND tpp1.supportedbusinessaction = sba1.ID AND sba1.tradingpartner = tp1.ID AND sba1.businessaction = ba1.ID AND tp2.name = ? AND ba2.name = ? AND ba2.revision = ? AND sba2.isinitiator = ? AND tpp2.agreement = ag.ID AND tpp2.supportedbusinessaction = sba2.ID AND sba2.tradingpartner = tp2.ID AND sba2.businessaction = ba2.ID AND tpp1.agreement = tpp2.agreement AND ((ag.effectivefromdate <= SYSDATE) OR (ag.effectivefromdate IS NULL)) AND ((ag.effectivetodate +1 >= SYSDATE) OR (ag.effectivetodate IS NULL))
2009.03.01 at 15:37:33:139: Thread-20: B2B - (DEBUG) RepoDataAccessor:getAgreementNameByBaTPName() bind vars: TEE,BARFEDI841,1.0,Y,TEE,BARFEDI841,1.0,N
2009.03.01 at 15:37:33:145: Thread-20: B2B - (ERROR) Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate
at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementNameByBaTPName(RepoDataAccessor.java:2345)
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:186)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:587)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processIncomingTPA(TPAProcessor.java:238)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1832)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2573)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2443)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2398)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
2009.03.01 at 15:37:33:145: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: processIncomingMessage B2BDE
2009.03.01 at 15:37:33:146: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Enter
2009.03.01 at 15:37:33:146: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Enter
2009.03.01 at 15:37:33:146: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error message is Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate
2009.03.01 at 15:37:33:146: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired Enter
2009.03.01 at 15:37:33:147: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired {filename=TEE_2009Mar01_15_37_29_170.dat, filesize=7787, file_ext=dat, fullpath=//users/dab2b01/RF841/TEE_2009Mar01_15_37_29_170.dat, timestamp=1970-01-01T00:00:00.000-00:00}
2009.03.01 at 15:37:33:147: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired returning false
2009.03.01 at 15:37:33:147: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException FA not required
2009.03.01 at 15:37:33:148: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Error Message: Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate
2009.03.01 at 15:37:33:148: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2009.03.01 at 15:37:33:149: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message found
2009.03.01 at 15:37:33:149: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new b2berror object
2009.03.01 at 15:37:33:149: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState enum0 not null
2009.03.01 at 15:37:33:149: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message error information
2009.03.01 at 15:37:33:155: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message protocol message id
2009.03.01 at 15:37:33:171: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message payload storage
2009.03.01 at 15:37:33:182: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new business message
2009.03.01 at 15:37:33:182: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow Enter
2009.03.01 at 15:37:33:189: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty name TEE
2009.03.01 at 15:37:33:189: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty type and value nullnull
2009.03.01 at 15:37:33:196: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow BusinessAction for the given name BARFEDI841 BusinessAction_0E95
2009.03.01 at 15:37:33:207: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information
2009.03.01 at 15:37:33:217: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Exit
2009.03.01 at 15:37:33:218: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Native Event Tbl Row
2009.03.01 at 15:37:33:218: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateNativeEvtTblRow Enter
2009.03.01 at 15:37:33:220: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateNativeEvtTblRow msgInfo.id = TEE_2009Mar01_15_37_29_170.dat@0A4DBD5D11FC2AEDA770000018E26600
2009.03.01 at 15:37:33:220: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:
** DbAccess:updateNativeEvtTblRow:tip_wireMsg protocolCollabID = null
2009.03.01 at 15:37:33:226: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException notifying App
2009.03.01 at 15:37:33:226: Thread-20: B2B - (DEBUG) Engine:notifyApp Enter
2009.03.01 at 15:37:33:232: Thread-20: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0A4DBD5D11FC2AEDA680000018E265F0</b2bMessageId>
<errorCode>AIP-50547</errorCode>
<errorText>Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate</errorText>
<errorDescription>
<![CDATA[Machine Info: (dgia21a.TEEis.com)
Description: Unable to identify the trading partner agreement from the given input values. Also verify agreement effectiveToDate
StackTrace:
Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate
at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementNameByBaTPName(RepoDataAccessor.java:2345)
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:186)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:587)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processIncomingTPA(TPAProcessor.java:238)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1832)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2573)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2443)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2398)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2009.03.01 at 15:37:33:244: Thread-20: B2B - (DEBUG) Engine:notifyApp Exit
2009.03.01 at 15:37:33:244: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updated the Error Message Successfully: Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate
2009.03.01 at 15:37:33:245: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Exit
2009.03.01 at 15:37:33:245: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Exit
2009.03.01 at 15:37:33:245: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:incomingContinueProcess Exit
2009.03.01 at 15:37:33:245: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleMessageEvent Exit
2009.03.01 at 15:37:33:245: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processEvents Exit
2009.03.01 at 15:37:33:246: Thread-20: B2B - (DEBUG) DBContext commit: Enter
2009.03.01 at 15:37:33:263: Thread-20: B2B - (DEBUG) DBContext commit: Transaction.commit()
2009.03.01 at 15:37:33:263: Thread-20: B2B - (DEBUG) DBContext commit: Leave
2009.03.01 at 15:37:33:264: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Exit

Error: Common entries are not permitted for plan queries and input queries

Hi,
I have a 2 selections in the column struct:
1. year = 2005, version = actual
2. year = 2006, version = plan, marked as data can be changed using user entry or planning function
row has posting periods from 1-12
in the workbook I have inserted this query in the workbook in analysis grid. it runs good.
now i added a button and assigned planning function to it. this planning function copies 2005, actuals to 2006, plan.
when i execute the workbook and hit this button, it gives me following error:
"Common entries are not permitted for plan queries and input queries"
please can anyone provide me assistance with this issue.
thanks,
sam

when i go to diagnosis it displays following:
Diagnosis
InfoProvider ZIP_PLAN2 must be described in this application by both a plan query and by a input-ready query, which is directly defined on the InfoProvider ZIP_PLAN2.
System Response
This is not permitted.

B2B-50547 Agreement not found for trading partners

I am attempting to try out using a File listening channel. I have set up the channel with the file name format %TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%_%MSG_TYPE%_%MSG_ID% as shown in the Technical Note: 11g_002 File/ FTP capabilities. The folder is named as the from TP.
I place the message into the From TP directory defined in the listening channel. The file is processed but I get B2B-50547 Agreement not found for trading partners: FromTP ABC, ToTP XYZ with document type PAYMUL-D96A-INBOUND. If I don't have the file name format set for the listening channel the message is just treated as a wire message.
The file name processed is XYZ_PAYMUL_D96A_1_MB12.xml
The Document set up is
EDI_EDIFACT
D96A -- Document Protocol Version
     PAYMUL-- Document Type
PAYMUL - Document Definition
Both ABC and XYZ have PAYMUL set up as a document. There is an agreement against partner XYZ using the PAYMUL definition which has been validated and deployed.
The xml file matches the xsd created from the ecs.
Diagnostics is on and shows:
fromTP : ABC
toTP : XYZ
DocumentProtocol : EDI_EDIFACT
DocumentProtocolVersion : D96A
DocumentType : PAYMUL
Agreement : XYZ001
MessageSize : 91688.0
MessageState : ERROR
FromEndpoint : null
FromEndpointProtocol : null
FromEndpointStatus : CONNECTED
ToEndpoint : file://localhost/D:\XYZEDI
ToEndpointProtocol : File
ToEndpointStatus : CONNECTED
Application : null
Application : null
Composite : null
CompositeVersion : null
Service/Reference : null
the exception is shown in diagnostics as:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>AC18139E137F05EE715000006438C1AF</correlationId>
<b2bMessageId>MB12</b2bMessageId>
<errorCode>B2B-50014</errorCode>
<errorText>
<![CDATA[General Error
]]>
</errorText>
<errorDescription>
<![CDATA[Machine Info: (mbaguley-uk)
Description: General Error
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
<errorDetails>
     <parameter name="b2b.messageId" value="MB12"/>
     <parameter name="b2b.documentTypeName" value="PAYMUL"/>
     <parameter name="b2b.documentProtocolVersion" value="D96A"/>
     <parameter name="b2b.documentDefinitionName" value="PAYMUL"/>
     <parameter name="b2b.documentProtocolName" value="EDI_EDIFACT"/>
     <parameter name="b2b.messageType" value="1"/>
     <parameter name="b2b.fromTradingPartnerId" value="ABC"/>
     <parameter name="b2b.fromTradingPartnerIdType" value="Name"/>
     <parameter name="b2b.toTradingPartnerId" value="XYZ"/>
     <parameter name="b2b.toTradingPartnerIdType" value="Name"/>
</errorDetails>
</Exception>
I must be missing a simple point or set up here so would appreciate any guidance.
Thanks

Both ABC and XYZ have PAYMUL set up as a document. There is an agreement against partner XYZ using the PAYMUL definition which has been validated and deployed.I think you have created an outbound agreement (ABC sending message to XYZ). If that is the case then go to Channel Attributes of your File listening channel and select the Internal checkbox. save the configuration of channel and run a test again.
Regards,
Anuj

AIP-50547: Trading partner agreement not found for the given input values

I am trying to setup outbound 810. I have it working in one environment I took export and imported in another environment. But it gave me following error. I purged repository and configured everything again and it still gives me same error:
2007.08.25 at 19:41:20:997: Thread-21: B2B - (DEBUG) RepoDataAccessor:getAgreementIdByBaTPName() SELECT ag.agreementid FROM TIP_BusinessAction_ra ba1, TIP_Party_ra tp1, TIP_BusinessAction_ra ba2, TIP_Party_ra tp2, TIP_SupportedBusinessAction_ra sba1, TIP_SupportedBusinessAction_ra sba2, TIP_Participant_ra tpp1, TIP_Participant_ra tpp2, TIP_Agreement_ra ag WHERE tp1.name = ? AND ba1.name = ? AND sba1.isinitiator = ? AND tpp1.agreement = ag.ID AND tpp1.supportedbusinessaction = sba1.ID AND sba1.tradingpartner = tp1.ID AND sba1.businessaction = ba1.ID AND tp2.name = ? AND ba2.name = ? AND sba2.isinitiator = ? AND tpp2.agreement = ag.ID AND tpp2.supportedbusinessaction = sba2.ID AND sba2.tradingpartner = tp2.ID AND sba2.businessaction = ba2.ID AND tpp1.agreement = tpp2.agreement AND ((ag.effectivefromdate <= SYSDATE) OR (ag.effectivefromdate IS NULL)) AND ((ag.effectivetodate +1 >= SYSDATE) OR (ag.effectivetodate IS NULL))
2007.08.25 at 19:41:20:997: Thread-21: B2B - (DEBUG) RepoDataAccessor:getAgreementIdByBaTPName() bind vars: RSC,SEND_INVOICE,Y,PETSMART ,SEND_INVOICE,N
2007.08.25 at 19:41:22:854: Thread-21: B2B - (ERROR) Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "RSC", To party[NAME] "PETSMART ", Business action name "SEND_INVOICE"; also verify agreement effectiveToDate
at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementIdByBaTPName(RepoDataAccessor.java:1977)
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:166)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:389)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:192)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:731)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:531)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:344)
at java.lang.Thread.run(Thread.java:534)
I took SQL from the log and used the parameter in the log and executed query at sql prompt and it finds agreement id see below.
SQL> SELECT ag.agreementid FROM TIP_BusinessAction_ra ba1, TIP_Party_ra tp1, TIP_BusinessAction_ra ba2, TIP_Party_ra tp2, TIP_SupportedBusinessAction_ra sba1, TIP_SupportedBusinessAction_ra sba2, TIP_Participant_ra tpp1, TIP_Participant_ra tpp2, TIP_Agreement_ra ag WHERE tp1.name = 'RSC' AND ba1.name = 'SEND_INVOICE' AND sba1.isinitiator = 'Y' AND tpp1.agreement = ag.ID AND tpp1.supportedbusinessaction = sba1.ID AND sba1.tradingpartner = tp1.ID AND sba1.businessaction = ba1.ID AND tp2.name = 'PETSMART' AND ba2.name = 'SEND_INVOICE' AND sba2.isinitiator = 'N' AND tpp2.agreement = ag.ID AND tpp2.supportedbusinessaction = sba2.ID AND sba2.tradingpartner = tp2.ID AND sba2.businessaction = ba2.ID AND tpp1.agreement = tpp2.agreement AND ((ag.effectivefromdate <= SYSDATE) OR (ag.effectivefromdate IS NULL)) AND ((ag.effectivetodate +1 >= SYSDATE) OR (ag.effectivetodate IS NULL));
AGREEMENTID
100

Hello Mr Desai,
Few question and pointers.
1. Are these two environments pointing to the same repository. Please ensure the system date is appropriate.
2. Please point your second environment to the Repository of the first environment and check. This will give us some data point.
3. Make sure the agreement is deployed in your new environment and active. I assume you are importing the agreement on a clean repository.
4. Please send us the export and payload file for analysis
Rgds,
Ramesh
4.

Getting error while processing EDIFACT-D96A-ORDERS.. Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND

Hi Anuj & All,
    I'm trying to create an outbound scenario with EDIFACT-D96A-ORDERS. A simple SOA composite application polling data from DB and through B2B adapter 'send' option provides data to B2B system.
Set up two partner profiles like this,
Host:
Name: HTP
EDI Group ID: HTP
EDI Interchange ID: Interchange Sen
EDI Interchange ID Qualifier: 01
Remote:
Name: RTP
EDI Group ID: RTP
EDI Interchange ID: Interchange Rec
EDI Interchange ID Qualifier: 01
Other settings are as usual. Delivery channel of generic file created on RTH.
Now, few documents settings on B2B console are like this,
D96A-> Interchange tab
Create UNA: Never
ORDERS-> Transaction
Functional Group Identifier Code: ORDERS
Controlling Agency: UN
- other properties are unchanged.
On SOA side, the bpel invoke activity which calls B2B adapter has following properties:
<invoke name="InvokeOrders"
inputVariable="InvokeOrders_send_InputVariable"
partnerLink="D96A.ORDERS" portType="ns2:send_ptt"
operation="send" bpelx:invokeAsDetail="no">
<bpelx:inputProperty name="b2b.toTradingPartnerIdType"
    expression="'NAME'"/>
<bpelx:inputProperty name="b2b.toTradingPartnerId"
    expression="'RTP'"/>
<bpelx:inputProperty name="b2b.messageType" expression="1"/>
<bpelx:inputProperty name="b2b.messageId" variable="messageID"/>
<bpelx:inputProperty name="b2b.fromTradingPartnerIdType"
    expression="'NAME'"/>
<bpelx:inputProperty name="b2b.fromTradingPartnerId"
    expression="'HTP'"/>
<bpelx:inputProperty name="b2b.documentTypeName"
    expression="'ORDERS'"/>
<bpelx:inputProperty name="b2b.documentProtocolVersion"
    expression="'D96A'"/>
<bpelx:inputProperty name="b2b.documentProtocolName"
    expression="'EDIFACT'"/>
<bpelx:inputProperty name="b2b.documentDefinitionName"
    expression="'ORDERS_def'"/>
<bpelx:inputProperty name="b2b.conversationId"
    variable="ConversationID"/>
</invoke>
The error I'm getting on B2B Console->Reports->Business Message, while running this is,
Error Code B2B-50547
Error Description Machine Info: (htp01310-vm01.htp.com) Description: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
Note: On Manage Deployment Tab I've checked the agreement is in active state.
-- Business Message (Result):--
State: MSG_ERROR
Document Type: ORDERS
Agreement: <blank>
Sender: HTP
Receiver: <blank>
-- Application Message (Result):--
Sender Id Type: NAME
Sender Value: TCS
Receiver Id Type: NAME
Receiver Value: ORCL
Document Type: ORDERS
Document Definition: ORDERS_def
Document Protocol Name: EDIFACT
Document Protocol Version: D96A
Direction: OUTBOUND
State: MSG_COMPLETE
- Can anybody please shoot some pointer on how to resolve this? Please let me know if you need further configuration details which I've not mentioned here.
Regards,
- @bhijit

Hi Mariusz,
    Thanks for your reply. Yes I think so, probably you're right. But finest trace level doesn't give much clues on "wrong mapped" data. Anyway, here is the detail log. Please don't forget to point out if you find something interesting.
#### <Error> <oracle.soa.b2b.engine> <htp01310-vm01.htp.com> <soa_server1> <Workmanager: , Version: 0, Scheduled=false, Started=false, Wait time: 0 ms
> <<anonymous>> <BEA1-0D3F5ABAC0B2E50C6CCB> <449b4b64fa2729cc:59737e36:146f08831ee:-8000-0000000000127da6> <1404379704092> <BEA-000000> <Error -: B2B-50547: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Error -: B2B-50547: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>
#### <Error> <oracle.soa.b2b.engine> <htp01310-vm01.htp.com> <soa_server1> <Workmanager: , Version: 0, Scheduled=false, Started=false, Wait time: 0 ms
> <<anonymous>> <BEA1-0D3F5ABAC0B2E50C6CCB> <449b4b64fa2729cc:59737e36:146f08831ee:-8000-0000000000127da6> <1404379704569> <BEA-000000> <Error -: B2B-50547: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Error -: B2B-50547: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>
Rgds,
- Abhijit
P.S. - Can you please check what is the value of "Functional Group Identifier Code" for D96A ORDERS.

Inv. Consign. - Stock category K is not permitted for general stock search

Hi,
IS-Retail ECC 6.0
Unable to select another vendor consignment inventory for the same article at TO creation. Get the following message:
+Stock category K is not permitted for general stock search+
+Message no. L3727+
+Diagnosis+
+You have entered a stock category (special stock indicator and special stock number) during transfer order creation that is not permitted by general stock determination.+
+Example:+
+General stock determination only allows you to enter stock categories 'own stock' and 'consignment stock' of vendor 6411. You cannot enter special stock 'K' and special stock of (vendor) 6512+.
Not using batch management but already applied OSS note1034907 - Picking consignment stock in Warehouse Management without success.
Any idea?
Thanks
Gaetan

There is the response back from SAP on the subject. We also faced the situation where the stock determination was done but we had no stock available for the first sorted stock in this case our own stock. We have than created a user exit to take out any 0 line item from the sort to bypass this problem and get the next stock vendor available . Hope that will help.
Gaetan
In the retail consignment processing the stock split is excluded during
stock determination. That means, you have to set the stock split to 1.
In your case, if you check the customizing settings of the stock
determination for
- site 1100,
- stock determination rule Z001 and
- stock determination groupe Z001,
the stock split or the number of splits is 002. But, this is not
possible in coherence with the retail consignment processing and the
creation of a TO. We will prevent such a scenario also in the coding.
Therefore you are not able to select another vendor for consignment. In
this case you have to change/adjust your customizing settings for stock
determination. Please check also the usage of an alternate stock
determination rule.
For further information, please check/compare also the documentation.
Customizing documentation:
When stock determination is activated, the stock split is excluded
during stock determination, which means you have to set the stock
split to 1.
Documentation in the Help Portal:
* It is not possible to make a partial delivery of a delivery item
from both consignment stock and a company's own stock. Nor can you
deliver an item from the consignment stock of serveral special stock
managers.
That means, please check/adjust your customizing settings for the stock
determination.

Setup time not seen for Planned Orders/ Man Orders in GPB

Hi all,
I'm facing an issue where I'm unable to see the Setup activity(green bar) in the Graphical Planning Board for Planned Orders and Manufacturing Orders.
At first I thought this was only happening for Planned Orders in Released status. However this behavior seems to be erratic with some orders on the same Product showing Setup whereas others are not.
Any ideas?
~Rishi

Hi,
I am assuming you are using setup matrix .
In case of setup matrix system will take setup time from setup matrix.
If two planned order are created for the same product, system will consider the setup time for the first. For the second it will not show setup time (becasue most probably you have maintained product x to product x - o times).
Regards
Amlan

QA32: Without going in Inspection lot stock screen system should not allow for UD

Hi
At the time of UD "without going in Inspection lot stock screen system should not allow to save the UD".
Please suggest how to restrict.
Regards
Ashish

Please go through the below link & with small changes you can fulfill your requirement using user profile
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/601c82e3-b743-2c10-dbb6-ed4c00167157?QuickLink=index&…

Integrated Planning - Navigation attribute not shown for Planned figures

Hello,
I have created a Input ready query to get the actual figures from previous years and enabling users to enter the planned figures. I have created Planning functions to copy and revaluate.
Reg   Account    Actual         Planned
US         123000     $3000         $4000
US         124200     $5000         $6000
I have one more report where it shows the Actual & Plan comparision.
In the Actual & Plan comparision report I have an additional Navigational attribute SIC code to be shown for each account.
My Actual & Plan comparision report should ideally be seen like below.
Reg   Account    SIC Actual         Planned
US         123000      3026         $3000         $4000
US         124200      4325         $5000         $6000
But it is showing as below where it has # for Planned figures and it shows blank.
Reg   Account     SIC   Actual         Planned
US         123000      3026         $3000         <blank>
US         123000      #              <blank>       $4000
US         124200      4325         $5000          <blank>
US         124200      #              <blank>        $6000
SIC Code is a navigational attribute of account. What changes do I have to do to make the SIC code to be shown for planned figures.
Any help would be highly appreciated and rewared.
Regards,
KK

I figured it out. I didnt assign the navigation attribute to the plan cube in the multiprovider. Thanks!!
Edited by: KK on Feb 19, 2008 10:12 PM

Input Help (F4) does not work for Planning Functions in Web

Hi Gurus,
I am working in BI-Integrated Planning.
When I execute a planning function from web layout (through Web Application Designer), the "Input Help" does not work. When I give F4 it takes me to the initial planning layout screen from the planning function variable screen without any action being performed.
But the "Input Help" works fine when I have to select for the variable from the initial selection to open the planning layout.
Can anyone suggest me any fix for this...
Thanks!!!

Hi All,
Can somebody help me here what went wrong with indesign cc extension so that copy/paste does not work in input type element text
Regards,
Alam

Oracle 11.2.0.1.0 Not Supported For Planning ?

I just noticed this entry in the Platform Matrix:
Oracle database 11.2.0.1.0 is supported only for: Calculation Manager, EPM System Installer (requires 11.1.1.3.05), EPM Workspace, ERP Integrator, Financial Reporting (requires 11.1.1.3.28), Performance Management Architect, Shared Services (requires 11.1.1.3.11)
Ok so I guess this rules out 11.2 as a supported RDBMS for Hyperion Planning 11.1.1.3 ? I imagine anything lower than that, say 11.1.0.6.0 or lower should not be a problem then ?
Or does this mean it's not officially supported, but will work just fine? Not worth taking the chance though right?

Now if one was to implement say Oracle 10g, or an earlier version of 11g, and then later upgrade the RDBMS to a higher, supported version would that have any implications on the Planning setup? Generally spealing if one wanted to upgrade to a higher database after the implementation what would be the steps one needs to take?
Edited by: EssbaseApprentice on Oct 14, 2010 9:53 AM

Deployment - setting for system not to create planned orders.

hi
I am executing deployment at the plant level.
i have req. of 8000 on 26th and 9000 on 27th.
i created a stock of 3000 on 25th.
i am executing push deployment and maintained setting accordingly.
After completion of deployment, system deploys the stock ie 3000 and creates Planned order for the remaining 5000 to meet the demand of 8000.
What setting has to be maintained such that system only deploys 3000 or the stock only and does not create a planned order for the unful filled demand. ???
in onther words system should deploy the stock and should not do anything more than that.
Thanks.

Hi Aswath,
Can you answer these few questions for me? I will be able to answer your more appropriately.
What is the order of planning runs in your system?
1. DPR for demand at DC that creates distribution demand at the plant
2. Deployment of the current stock at the plant
3. Planning run at the plant to create planned order for any demand left out
Is that the order? This does not make good sense for me but I don't know your scenario.
What kind of deployment run are you suing? deployment heuristics or optimizer?
In both the cases, you have "delete" and "reduce" option.
The system deploys the stock at the DC based on the distribution demand ( coming from DC to Plant).
If you use delete option, the system deploys for the amount of stock it has and deletes the remaining distribution demand.
So, if you got distribution demand of 100 PCs, there is only 50 PCs stock at plant, the plant deploys 50 and deletes the other 50 PCs distribution demand at the plant. You need to rerun DRP at DC if you want to get back this demand.
If you use reduce option, the system deploys for the amount of stock it has and reduces the remaining distribution demand.
So, if you got distribution demand of 100 PCs, there is only 50 PCs stock at plant, the plant deploys 50 and reduces the distribution demand at the plant to 50 PCs.
I think you have the second case and you are running planning run at the plant and it's creating orders. If you don't want the system to create them, use the "delete" option in deployment run.
Please let me know if I am getting your point right.

Stock transfter Sch. Agreement not taken for Planning

Similar Messages

Maybe you are looking for