Stock transport not creating entry in MARD

Hi,
I have created a stock transport order UB from one storage location to another within the same plant.
I created a delivery and posted the goods issue. It generated a material document with movement type 641.
The delivery is not yet received in the receiving storage location.
Now, the problem is that the quantity does not show as "stock in transfer" in the Plant stock view of the material master.
Also, the value for MARD-UMLME is zero, even though I have posted the GI for the delivery and not done any GR in the receiving storage location.
Does anyone know what is wrong?
Regards,
Ola

MARD-UMLME
Stock in transfer (from one storage location to another)
Quantity that has already been withdrawn from the issuing storage
location but has not yet arrived at the receiving storage location.
This stock in transfer contains the quantity being transferred as the
result of transfer postings in Inventory Management, but not the
quantity being transferred on the basis of stock transport orders.
See OSS note 25220:
When goods issue is posted for a cross-company purchase order (for a delivery with movement type 643), stock in transit is not updated in the receiving plant.
Cause and prerequisites
This procedure was chosen because usually the issuing and receiving companies have to be managed on different computers. In addition, goods receipt in the receiving plant can be posted before goods issue in the issuing plant with this kind of stock transfer, i.e., the corresponding stock in transit would temporarily be negative.
Solution
You can use the reporting function in Purchasing to display the stock quantities in transit.
Starting with release 3.0D, the stock found with cross-company orders in transit is displayed in the stock overview (transaction MMBE) as well as displayed dynamically determined in the plant availability (MB53).

Similar Messages

  • BDC for PA30 action hire is not creating entry in IT 1001

    Hello All,
       I created a BDC for to create hire action in system to create some dummy data, but its not creating entry in infotype 1001 for relation between person (P) and position (S). If i create entry in PA30 it create ebtry, if i try BDC in Dialog mode even then its not creating it.
      I read a lot about Dynamic action in this kind of issue but i seen table T588Z but there is no any insert dynamic action for IT 1001.
    Can anybody throw some light on the cause of the same.
    i tried to create same data with FM HR_MIANTAIN_MASTERDATA but i have to drop that idea becasue it was not able to crate record with empty PERNR field. if your answer is use this FM then please provide some working code as i searched a lot on the same issue but no any concrete proof on the same.
    appreciate any reply.
    Mani

    Hi,
    Are you getting any error?
    If not i think you have to lock the employee before creating an entry to the IT 1001 using FM
    'BAPI_EMPLOYEE_ENQUEUE'
    and create an entry to IT 1001 using BDC or HR_MIANTAIN_MASTERDATA
    and unlock an employee by using FM
    'BAPI_EMPLOYEE_DEQUEUE'
    Regards
    Krishna

  • Can not create entries in httpurlloc in SAPNW2004s SneakPreviewABAP

    Hello Comunity,
    I have SneakPreview SAPNW2004s Abap Version installed and now I try to configure the HTTPURLLOC in SE16 for Reverseproxy-Scenarios. Anyway I can´t create entries, "The system settings do not allow any changes".
    Anyone tried that before or run in the same problem?
    I already checked SDN, there are some entries how to switch to debug mode but I´m not sure if this is the right way. Maybe I only miss something.
    Regards

    Hi,
    we had the same problem in the sneak preview, it seems to be a feature that was switched off on purpose, because it's just a preview system for playing around, in the normal development systems it's no problem to change HTTPURLLOC. It might just be the same as with HTTPS which is not included in the sneak preview.
    Regards, Heidi

  • Automatic recording of changes - transports not created

    Hello
    I have strange problem with ERP2004 customizing system. 
    I have 2 clients in the system: customizing and test client.
    While customizing work system doesn't show screen with selection of transport request, and some changes are not recorded in transports. What could be the reason? Automatic recording of changes is enabled in customizing client. Sometimes editing client in SCC4 helps - but for a short time.

    Hello,
    Transport request will be created for all the changes made in customization or workbench changes. Every customization/workbech object may create seprate change request. When you are doing customization for a object, first time you will be prompted for Transport request. After creating new transport request further chnages you will not be asked becuase your changes for the same object and changes will be saved in the same transport. Once you relesed the transport then again when you do any changes you will be prompted for new transport.
    Cheers,
    -Sunil

  • Stock Transport Order Create

    Hi All,
    I need help regarding Stock Transfer Order.
    I have created the Stock Transfer Order by using the transaction 'me27',while creating it is asking the Item Conditions ,what are these item conditions, are they vary from material to material,are the conditions are predefined
    Is there any bapi to get the 'Item conditions' like purch org...
    What is the Bapi to Create Stock Transfer Order ,what are the input parameters.......
    Thanks in Advanance.
    Srinivas

    Hi,
    Please check the delivery date in the STO created.and adjust the del creation date etc input fields at VL10G and try the posting.If there exists no error in the po created.

  • Stock transport order  problem

    hai guys
    <b>Requirement:</b> Supplying plant good issued valuation type should be automatically updated in the receiving plant while posting goods receipt.
    1.Stock transport order created in receiving plant with valuation type V1.
    2.supplying plant posting goods issue With respect to the Stock transport order with valuation type V2.
    3.But in the receiving plant it is showing valuation type V1 only.i want this should be automatically updated to Valuation type V2 from the supplying plant while posting goods receipt.
    <b>NOTE:</b>both valuation type V1,V2 configured both in the Supplying and receiving plant.
    How to resolve the above problem.

    Use TCode MBSU to recive the material in receing plant against the suppling plant document
    If u do goods recipt against STO it will pick up the data from sto only ie V1 and not V2
    Reward if useful

  • Stock Transport Order (STO)will not create delivery

    I have created a intercompany Stock Transport Order (STO) and it has created the shipping tab in the Purchase order(PO), and all seems to be correct.
    I have material in the plant, yet when I go to create the delivery using VL10G, the PO does not show as a choice. I also do not get an error, so I cannot tell why it is not creating the delivery.
    Is there a way to see an anaylis of why the STO is not showing as a choice?
    Thanks,

    Hi,
    Please check the delivery date in the STO created.and adjust the del creation date etc input fields at VL10G and try the posting.If there exists no error in the po created.

  • Default stock type as quality inspection when i create Stock transport orde

    I want default stock type as quality inspection when i create Stock transport order with T-code Me21n.All the settings in he material master are maintained for inspection type 08. (donot wnat to change the  stock type manually,it should come as default)Please provide solution.

    Hi
    This is not QM setting this is Achieved by MM setting in SPRO.
    SPRO>MM>purchasing>PO>define screen layout at document level>select UBF(STO) or ME21n>overview>GR/IR control>
    select Qulaity inspection--> decheck the Opt Entry click on Display.
    This will solve your problem
    Regards
    Sujit

  • Error occuring while creating a Delivery for Stock transport order

    Hi,
    I am getting error while creating the delivery for thr stock transport order.The error message is given below.
                                                                                    Error Log for coll. run 0001248218                                                                               
    4       6000038321 000010 Only 0 ST of material F784100 available                                   
         4       6000038321 000010 An item with no delivery quantity is not permitted. Item will be deleted. 
         4       6000038321 000020 Only 0 ST of material F784100 available                                   
         4       6000038321 000020 An item with no delivery quantity is not permitted. Item will be deleted. 
         4       6000038321 000030 Only 0 ST of material F784100 available                                   
         4       6000038321 000030 An item with no delivery quantity is not permitted. Item will be deleted.                                                                               
    The stocks are present in the plant.
    Can anyone help me to solve this issue?
    Thanks
    Srinivasan

    Hi,
    Check in
    SPRO--IMG-MM-IM and PI---stock determinationassign stock determination in applications---Inventory management
    Check for 641 or 647,there is a SD rule assigned.
    Regards,
    Deepak.

  • Stock transport order between storage locations and assignment category type E not in MRP

    Hello Gurus,
    I have a stock transport order between 2 storage location which belongs to the same plant. Besides the stock transport order is allocated to a sales order (account assigment category E). When I run the MD03, the system take into account the quantity of the stock transport order as a future entry and this is wrong. I need that the MRP has not into account the stock transport order as an entry.
    As an important information, If I modify the stock transport order removing the account asignment category E (sales order), then the MRP doesn't take into account it, so this is correct.
    Could anybody tell me how to get it?
    Thanks in advanced.

    Laura,
    It is normal that MRP will consider an STO as a receipt element; this is basic planning.  It is unclear to me why you think you do not want it to do so, but I will assume you have some logical reason.
    Contrary to what some others may have suggested, changing the scope of check for availability checking has no effect on which elements are considered for MRP.  MRP is a completely separate functionality from Availability Check.
    For Location > Location STOs (within a plant), then, you normally have the receipt element of the STO in the destination storage location, and the requirements element of an equal amount in the source storage location.  Net of these two elements is zero, unless you have already issued the STO at the source location.
    Changing the Account assignment from "E" means that the STO will not be relevant for your Sales order (in other words, when you receive this STO into the destination storage location, it cannot be used for your sales order).  In a general MTO scenario, it also means that the proceeds of this STO (the stock you received) cannot be used for ANY sales orders.
    One way that some people make an STO 'not relevant' for MRP is to alter the destination storage location such that it is not relevant for MRP.  You can change the MRP relevancy of the storage location in MM02 > MRP4 tab
    Best Regards,
    DB49

  • Stock Transport Order - Partners not Determined

    Hi Colleagues,
    We have a simple Intra company Stock Transport Order and want to get the partner function 'VN' into the purchase order and then into the Inbound Delivery
    We have configured the partner schemas and assigned to the vendor account group 0007. Partners are created in the plant vendor record
    We have configured the purchase document schema and assigned this to document type 'UB'. However, the partners are not defaulted into the STO. We can assign them manually
    However, when we create the Inbound Delivery for the STO the vendor is not defaulted into the delivery and gives an incompletion error. We can manually enter vendor in the inbound delivery and then save the document.
    Any Ideas what is wrong or missing?
    Thanks
    Steve

    have a look into OSS note 863541 - Standard vendor for inbound delivery w/ purchase order refer

  • Stock Transport Scheduling Agreement - PO - created but Shipping Conditions

    Hello Gurus,
    Our client has a process of STSA (stock transport scheduling agreement - instead of PO) where they want to transfer the materials from US to Europe, being Europe customer. Europe creates STSA and requests out of 100 qty first 25 by Air Shipping Conditions and the rest 75 by Ocean Shipping Conditions.
    Once we create STSA Shipping conditions we can not change in STSA in Item data ->morefunctions->shipping data. Where as same can be played around in Sales order. So currently no workaround so they are changing the customer master from Air to Ship and creating multiple STSA.
    I would like to know whether a good solution is available already and I am not aware of yet. Please let me know.
    Mahesh

    Hi Mahesh,
    We have the same issue - just wondering if you ever found a solution?
    Thanks,
    Mark

  • Stock Transport Order-shipping point not determined

    Hi MM Gurus,
    We need to set up STO for transferring stock from plant 2000 to 1000. I have completed following setting.
    IMG
    Enterprise Structure-Assignment-Sales and Distribution-Assign sales organization to company code
    Both the sales orgnizations are in same company code. We have only one company code.
    Enterprise Structure-Assignment-Sales and Distribution-Assign sales organization - distribution channel - plant
    The sales area 1000 is are assigned to both the plants 1000 & 2000 and sales area 2000 is also assigned to both the plants.
    Enterprise Structure-Assignment-Logistics Execution-Assign shipping point to plant
    Plant 1000 is assigned to sales area 1000 & 2000. Plant 2000 is assigned to sales area 1000 & 2000.
    Materials Management-Purchasing-Purchase Order-Set up Stock Transport Order-Define Shipping Data for Plants
    For plant 1000 & 2000 cusomer master 56 & 57 respectively are maintained. The sales orginzation for these plants are 1000 & 2000 respectively.
    Materials Management-Purchasing-Purchase Order-Set up Stock Transport Order-Assign Delivery Type and Checking Rule
    Delivery type NL has been assigned to document type UB.
    The details of customer master 56 & 57 are as below
    Account Group - Sold To Party
    Reconcilliation account -121000
    Delivery plant 1000 & 2000 respectively
    Please note - No vendor number is maintained in these cusomer masters.
    Created these plants as vendors
    Account group 0007(Plants) and assigned plant numbers in the  additional data of purchasing.
    Material 251 is created and maintained in both the sales orgnization.
    Now when I am creating the STO for transferring goods from plant 2000 to 1000, I am getting error message.
    "Not possible to determine shipping data for material 251"
    Am I missing something? Some documentation say that I should create a receiving plant as customer in the sales area of supplying plant. If this is true, how to do it?
    Also, what is the significance of return vendor (maintaining vendor master in the customer) in this case?
    Your any clue will be appreciated.
    Thanks,
    Shekhar

    Shekhar,
    Customer must be maintained as a shipto as well.  
    In your STO config settings you don't need a customer assigned to the source plant, unless it will also be a destination plant (e.g. you also intend to execute STOs in the reverse direction, or from another plant).
    While looking at your customer (shipto), you will also want to look at Route Determination for this customer.  Typically, your route will be defined by customer zone (from cust master), shipping point zone (from shipping point definition configuration), and shipping conditions (customer master).  Route will be used during delivery creation to schedule the delivery.  Logically, the total duration between Material Availability date to Delivery date of the delivery (picking/packing/load/transit) should be something close to the planned delivery time in the Material Master, in order to maintain consistency throughout the entire planning and execution process.
    Don't forget to maintain your STO Purchase req stuff IMG>MM>Purch>PurReq>Set up Stock Transport Requisition.
    Rgds,
    DB49

  • Could not create Purchase Order Stock Transfer Order

    Hi Expert!
    Need your help.
    User could not make Could not create Purchase Order Stock Transfer Order for new plant 1075 & 1076 at P05 with error message Not posible to determine shipping data for material. Our new vendor are 510022060 for new plant 1075 and 510022061 for new plant 1076.
    The problem was caused by the missing STO setup for these two plant 1075 and 1076, as no customer code being referred.
    Now i got the customer number for these two plants but how to set it up in configuration? Please guide me step by step.

    Hi Crystal,
    The following customising need to be carried out for Inter Company Stock Transfer.
    Path : sproMaterials ManagementPurchasing-Purchase OrderSet up Stock Transport Order
    Define Shipping Data for Plants :
    For the Supplying plant (1) the Sales Org data to be maintained.
    For the Receiving plant (2) the Customer No to be maintained.
    Create Checking Rule - U can use existing one Eg : B
    Define Checking Rule : Use Standard one Eg :01 linked to B.
    Assign Delivery Type and Checking Rule -- For the Supplying Plant (1) and document type NB use the delviery type NLCC and Checking Rule B.
    Assign Document Type, One-Step Procedure, Underdelivery Tolerance :
    For the supplying Plant (1) and Receving Plant (1) ; assign the document type : NB.
    Points to be noted :
    The Material should exists in both the plants ( 1 & 2 ) with the sales view maintained . Note that the Loading grp / Transporting Grp is mantaory in Sales Views.
    The Vendor is to be assigned to the supplying Plant (1 ) in Purchasing View of Vendor Master.
    For that click on Extras - Add Purchasing data in Purchasing view of Vendor Master (XK02 )
    Do maintain the customer in Control data of Vendor Master.
    Do maintain the Vendor in Control data of Customer Master.
    Also note that shipping conditions are maintained in the Customer Master . The same can be found in Sales Area - Shipping Tab.
    Shipping Point determination :
    SPROLogistics ExecutionShippingBasic Shipping FunctionsShipping Point and Goods Receiving Point Determination--Assign Shipping Points ( For a particular Shipping condition/ Loading Grp /Plant - the shipping point is assigned ).
    Regards
    Ramesh Ch

  • Stock Transport order Should not Reserve material

    Hi
    When i create a stock transport order the material is getting reserved.
    What should be done so that material is not reserved against the stock transport order
    Regds
    RB

    Hi,
    Check in OPJJ whether auto  reservation is checked
    Regards

Maybe you are looking for

  • Ipod nano-song jumps prematurely

    In my ipod nano the song jumps to next in few seconds mostly. People suggest it is due to defective CD from which the song was downloaded on to itunes in PC Is it possible to dwload itunes from PC to a CD or DVD,erase itunes prtly or fully from the p

  • I need help connecting drums with MIDI-USB cable.

    I've been trying this for years, but I just don't know what to do or what I need to connect my electronic drums to GarageBand or any other MIDI programs, I pretty much connect the module and my mac with a MIDI to USB cable and nothing seems to recogn

  • How can i see the output of a form

    I am having one driver program and form.From these two how can i see the output.

  • Problem with resolveExpression method! IMPORTANT NEED HELP!!!

    HI! I use resolveExpression method public static Object resolveExpression(String expression) { FacesContext ctx = getFacesContext(); Application app = ctx.getApplication(); ValueBinding bind = app.createValueBinding(expression); return bind.getValue(

  • Is there a way to delete music from an iPhone without sync?

    I am a long time apple product user traveling in South America. My main computer is back in the states. I desperately need to find a way to selectively delete music to make space for more audiobooks I download wirelessly and more photos. I would real