Stock transport order between storage locations and assignment category type E not in MRP

Hello Gurus,
I have a stock transport order between 2 storage location which belongs to the same plant. Besides the stock transport order is allocated to a sales order (account assigment category E). When I run the MD03, the system take into account the quantity of the stock transport order as a future entry and this is wrong. I need that the MRP has not into account the stock transport order as an entry.
As an important information, If I modify the stock transport order removing the account asignment category E (sales order), then the MRP doesn't take into account it, so this is correct.
Could anybody tell me how to get it?
Thanks in advanced.

Laura,
It is normal that MRP will consider an STO as a receipt element; this is basic planning.  It is unclear to me why you think you do not want it to do so, but I will assume you have some logical reason.
Contrary to what some others may have suggested, changing the scope of check for availability checking has no effect on which elements are considered for MRP.  MRP is a completely separate functionality from Availability Check.
For Location > Location STOs (within a plant), then, you normally have the receipt element of the STO in the destination storage location, and the requirements element of an equal amount in the source storage location.  Net of these two elements is zero, unless you have already issued the STO at the source location.
Changing the Account assignment from "E" means that the STO will not be relevant for your Sales order (in other words, when you receive this STO into the destination storage location, it cannot be used for your sales order).  In a general MTO scenario, it also means that the proceeds of this STO (the stock you received) cannot be used for ANY sales orders.
One way that some people make an STO 'not relevant' for MRP is to alter the destination storage location such that it is not relevant for MRP.  You can change the MRP relevancy of the storage location in MM02 > MRP4 tab
Best Regards,
DB49

Similar Messages

  • Stock transport order between storage locations

    Dear All,
    Could you please advise how to achieve the following:
    as a target i need to have a stock transfer order automatically generated for stock move from one sloc to another within one plant. ( MB1B for 311 is not needed since planning is required).
    E.g. i need to have a STO purchase requisition to be automatically generated by MRP from open Sales Order, so further i could convert it to purchase order manually.
    I have done the following:
    1)
    Customized a special procur. type with parameters for plant A:
    Procur. type: F;
    Spec. Procur. U
    Plant: A
    Stck Trsr: blank
    2) SPRO-MM-Purch Order-STO-STO btw slocs:
    - activated
    - assigned delivery type for UB doc. type
    3) in master data, MRP2 tab: production sloc= vendor's sloc; Sloc for EP= recieving sloc.
    4) included external plant number as for vendor to source list for target material.
    After the settings above, MRP creates a normal purchase req. but not STO purch. req as i need.
    What settings i'm missing?
    Thanks in advance,
    Regards,
    Andrey

    Dear,
    Check as found: http://www.sap123.com/showthread.php?t=176
    Regards,
    Syed Hussain.
    Edited by: Syed Hussain on Sep 14, 2009 7:43 PM
    Edited by: Syed Hussain on Sep 14, 2009 7:43 PM

  • Set Up stock transfer order between storage location

    Hi,
    We are already using Inter company Stock transfer order.
    Now we have found that it is possible to set up Inter company stock transfer order between two storage location.
    Can i have some configuration steps. I have tried it but not working.
    Thanks in Advance
    Samir Bhatt

    HI,
    Create a puchase order ME21N ---> Save
    Delivery VL10 G ---> Calculation rule (appropriate) --> Assaign the purchase order number here and execute.
    Select the Delivery creation line and do the back ground process.
    Start the log display and see the delivery document number by the documents button
    Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
    Billing (Intercompany pricing conditions should be set).
    Regards,
    Chetan.

  • Stock Transport Order - Issuing Storage Location

    Hi gurus -
    When raising a Stock Transport Order (UB type) and Issuing Storage Location is populated manually with an SLoc not extended for material in supplying plant, will system give an error or allow STO to be saved/created without throwing an error?
    Thanks,
    Karen

    Hey Karen!
    I am not sure if I understand your problem correctly.
    You do not want the system to create a new MARD entry when postin goods issue.
    You can enable/ disable this function with transaction OMB3 in the customizing.
    have fun
    Flo

  • Stock Transport order issueing storage location determination

    Folks,
    In case of a Stock transport order scenario in which plant A with SLOC1 delivery to plant B with SLOC 2. Is there any option how the issueing storage location can be determined? The delivering plant can be determined through the special procurement key but there is no option for the issueing SLOC.
    Regards,
    MdZ

    Hey Karen!
    I am not sure if I understand your problem correctly.
    You do not want the system to create a new MARD entry when postin goods issue.
    You can enable/ disable this function with transaction OMB3 in the customizing.
    have fun
    Flo

  • Stock Transport Order between Two Company codes

    Dear All
    Scenario-- Stock transport order Between two company codes.
    The valuation of Comapny Codes is at Moving Average Price.
    I have a scenario
    MAP of Issuing Plant-- Rs. 10 / kg
    I am able to pick up the price of Rs.10 (MAP) of issuing plant while creating PO.
    in receving plant.
    At the time of Goods issu the MAP has changed & become Rs.12/kg. Hence the goods issue takes place at Rs.12/- perkg.
    When we make GR at receiving plant ,the valuation of GR is at Rs.10 i.e at PO price.
    Is it possible to have a GR valuation at Goods issue price for that delivery note?
    Request Your feedback urgently.

    The invoice has the material costs at time of goods issue.
    You receipt is valuated to PO price. But when you post the invoice, then the MAP is adjusted,
    By setting up EDI, SAP will probably post the invoice before the goods receipt is done, hence the GR should be valuated with the invoice price.
    from Note 518368 - FAQ: Valuation for the purchase order;
    With which price is the goods receipt posted for a purchase order?
    Answer:
    If the goods receipt is executed before the invoice receipt, the goods movement is valuated with the purchase order price. If an invoice is already posted, the system uses the price of the invoice. If a partial invoice is received, the partial quantity corresponding to the invoice is valuated with the invoice price, the rest is valuated with the purchase order price.
    For more detailed information, refer to both the documentation of the material valuation and Note 380883.
    see as well Note 547570 - FAQ: VPRS in pricing

  • RE: Difference between Storage location and warehouse

    Hi All,
    What is the difference between storage location and warehouse?

    Hi,
    First of all Storage Lcoation is part of Inventory Management.
    Warehouse is part of Logistics Execution.
    Storage location is part of SAPu2019s enterprise structure that holds the stock quantity
    Option: To maintain a single storage bin for every material in every storage location
    To simplify: To utilize a storage location as the u201Cstorage facilityu201D means that the materialu2019s actual bin location is not important, or that the material is located in a single bin throughout the storage.
    Warehouse is part of SAPu2019s enterprise structure that holds the stock bin location
    To simplify: When a warehouse (Warehouse Management) is utilized as a storage facility, a materialu2019s actual bin location is of great importance
    Advantage: Track a materialu2019s changing bin location
    Warehouse Management has greater applications for use in a storage facility
    Disadvantage: More complexity and usually requires more  data entry
    Hope this helps.

  • Stock transfer between storage locations and lead time

    Hello,
    We use stock transfer orders between different storage locations. Is it possible to maintain the transport lead time between storage locations somewhere or do in need to use routes and scheduling?
    rgsd
    GAR

    Hi,
    Try using movement type 313 and 315
    313 -- Transfer posting SL to SL --- Remove from issuing SL
    315 -- Transfer posting SL to SL  -- Placing in Receiving SL
    Regards

  • Link between storage location and batch number to retrive the salk3 field

    HI,
    In my report i need to give the output as follows
    For each lgort with related batch number we need to get the salk3.So i need to get a link between lgort , batch number to retrive the salk3.can any one give the tables from which i can get the link and retrive the data.
    note: My report output should look like the fields lgort batch  and unrestriced value of stock in tcode mb52.
    subhashini.
    Edited by: subhashinikb on Apr 1, 2011 9:38 PM

    Hi,
    In 2 steps, u can get the unrestricted stock value.
    step1: Get material no (MATNR), plant (WERKS), batch (CHARG) and unrestricted stock (CLABS) from table MCHB by sending Storage location and batch number.
    Step2: Get standard price STPRS from table MBEW based on condition where MATNR = MCHB-MATNR, BWKEY = MCHB-WERKS and BWTAR = MCHB-CHARG.
             unrestricted value in MB52 will be (MCHB-STPRS) * (MCHB-CLABS).

  • Stock on posting date -storage location and batch wise

    Dear All
    I need to developa report exactly same as MB5B but with storage location and batch wise.
    We need  storage location wise opening stock, total receipts, total issues and closing stock, and values for given time period.
    I have gone through some history tables like MCHBH and MBEWH.
    But all the history tables are having fileds for period wise but not date wise.
    Any focus on this?

    You have to read the coding of MB5B to see how SAP is doing it.
    The stock per date is calculated, starting from a month end, adding or reducing quantities based on movements until the date in question is reached.

  • Invoice verification in Stock transport order between two company codes

    Hi
    I made 3 good issue in supplying plant of company codeagainst stock transport oder & 3 good receipt in receiving plant of company code.
    During invoice verification in MIRO, 3 lines items (Pertaining to 3 GRs) are not displayed But consolidated quantity (Sum of 3 GR qty) & value is displayed.
    Please tell me how to get 3 line items (as per GR) during invoice verification.
    Thanks
    Vinay

    Hi,
    Tick the GR based IV in the PO.
    Regards,
    deepak.

  • Apple script to locate and assign photos that do not belong to an album

    Is there an Apple script to locate photos that do not belong to an album and assign them to one specific album where you can distribute them. I just finished using an apple script for iTunes that does that job and have been searching for an apple script to do the same.
    Thanks For The Help
    Dan

    You can easily find photos that are not in any albums by using a Smart Album with the criteria:
    Album is not Any
    From there you'll have to manually drag them to their destination album.
    However, once you move photos to another album you'll have to leave it and then go back to it to see the changes you've made. It doesn't automatically update changes while you're viewing it.

  • Stock transport orders between 2 plants

    Hi,
    Daily lot of STO orders will be booked,but i am getting one planned order comibining all STO's when i run MRP,i want individual planned order per each STO for finished product.

    Hi,
    In MRP4 view put 1 in individual/collective field and than again run MRP.
    Probably this will solve your problem.
    Reward points if it helps.
    Rgds,
    Anup Dubey

  • Stock Transfer between Storage Location with Order

    Dear MM experts, 
    I am into SAP SD.
    Our client wants to Transfer Stock from one Storage Location to another Storage Location of the same Plant. (This can be easily done thru MB1B via Transfer Posting)
    But the unique requirement here is they require some kind of Delivery Order or Tansfer Order to be created first & only based on that document user can transfer Stock between Storage Locations of a same Plant. (Similar to Inter-Plant Stock Transfer where we create Stock Transfer PO & then move goods between plants).
    Can you please suggest on how to achieve the above scenario.
    Thanks,
    Jignesh Mehta
    Mumbai

    hi
    Stock Transfer between Storage Locations
    u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
    u2022 As a result of which user can input issuing storage location with supplying plant.
    u2022 Facility of using different delivery types for different issuing storage locations is available.
    u2022 Shipping Point data can also be determined based on the issuing storage location.
    refer following
    http://sapfunctional.com/MM/StockTransfer/Configure.htm
    http://help.sap.com/saphelp_scm41/helpdata/EN/23/29cf20eabe094e957763a46aa5be9d/content.htm
    regards
    kunal

  • Stock Transport Orders within AII, also using HUM

    Dear all,
    we currently have the following issue at my customer:
    We are implementing SAP AII on top of an existing solution, using WM and HUM.
    In the current solution for STOs from 1 plant to another, the GI of an outbound delivery triggers the SPED output and an inbound delivery will automatically be created in the receiving plant, copying the batches and HUs. All pretty standard so far.
    However, when using AII, the GI of the outbound delivery triggers an eASN, which will load the serial numbers in AII and at the same time create an inbound idoc DESADV that is supposed to create the inbound delivery in the receiving plant. IF we would not be using HU, this process works fine and the IBD is created.  BUT when using HU's we get the message that the HU is already GI'd and cannot be used again.
    When we take out the HU of the idoc, have the inbound delivery created and later on add the HU manually to the delivery it works fine as well, so the error is really linked to the idoc (HUSELECT008). We have already checked each and every note related to inbound idocs and the mentioned error, but no solution was found.
    Did any of you also experience this problem while implementing AII for a complex environment with STO's?
    Any help would be very much appreciated.
    Thanks in advance!

    Hi
    Please go thru the following navigation to set up STO between Storage location with delivery.
    SPRO-> Material management -> Purchasing -> Purchase order -> Set up stock transport order -> step up stock transport order between storage locations
    In first step Activate Stock transfer between storage locations and do other configurations.
    Regards
    Ramakrishna

Maybe you are looking for

  • How do I share music from my ipad to my desktop?

    I bought some music using my ipad and I cannot seem to get it on my desktop.  Why?  How do I fix this?

  • OIM 11g R1 - Modifying a Resource Erases Custom Process Task ???

    I've created a Generic Resource in OIM that uses the Database Applications Table connector 9.1.0.5.0. Then I add my own process tasks through Design Console under "Process Management -> Process Definitions". On each custom process task I've attached

  • TO ADD TAB AT HEADER LEVEL IN ME21N

    Hi guys I have to add a tab at header level of ME21N using BADI ME_GUI_PO_CUST and ME_PROCESS_PO_CUST can someone guide me how to do this? Thanks

  • Compaq armada m700 forgot power on password

    hello,i forgot my power on password(the key we need to enter on power on green box)for my compaq armada m700.Actually i opened it after a long time(2-2 1/2yrs).I enter the correct password but it is not accepting it.please help. thanks in advance

  • Kodak Zi8 import

    I have a new Kodak Zi8 digital video camera which records video to a SDHC card. I have attempted to transfer the video from the card to my computer using a IOGEAR universal memory card reader/writer, model GFR 280. However I get no image on the deskt