Stock transport order issue

Hi
My bussiness process is i have created stock transport order purchase order in me21n t.code doc type UB,item category 'U'then i do mb11 t.code 351 movement type Transfer posting to stock in transit from unrestricted-use.then i do the goods receipt in migo t.code.
Now my system taking goods receipt with Zero quantity without 351 movement goods not happening,is there any configuration i miss,
Regards
Sam

Hi,
For the STO , with 351 movement type its issue goods receipt from issuing plant n the stock will b in transit( on a way), so goods receipt will not happen in receiving plant and stock value is zero. For goods receipt to happen please do GR wrt 101 movement type. Then stcok will b updated.
Hope this clears.
Smitha

Similar Messages

  • Stock Transport order issueing storage location determination

    Folks,
    In case of a Stock transport order scenario in which plant A with SLOC1 delivery to plant B with SLOC 2. Is there any option how the issueing storage location can be determined? The delivering plant can be determined through the special procurement key but there is no option for the issueing SLOC.
    Regards,
    MdZ

    Hey Karen!
    I am not sure if I understand your problem correctly.
    You do not want the system to create a new MARD entry when postin goods issue.
    You can enable/ disable this function with transaction OMB3 in the customizing.
    have fun
    Flo

  • Stock Transport Order - Issuing Storage Location

    Hi gurus -
    When raising a Stock Transport Order (UB type) and Issuing Storage Location is populated manually with an SLoc not extended for material in supplying plant, will system give an error or allow STO to be saved/created without throwing an error?
    Thanks,
    Karen

    Hey Karen!
    I am not sure if I understand your problem correctly.
    You do not want the system to create a new MARD entry when postin goods issue.
    You can enable/ disable this function with transaction OMB3 in the customizing.
    have fun
    Flo

  • Inter - Company Stock Transport Order Issue

    MM SAP Gurus,
    When I try working on "inter company stock transport order between two company codes."
    I found the errors while creating PO(using document type UB)
    ie.
    *1st Error -Material 1 not maintained in Plant 2.
    2nd Error - Customer 1 does not exist (please check entry in plant 1)
    3rd Error - Not possible to determine shipping data for material1)*
    i couldnt find out the error................................
    Here is the configuration done by me......
    Company codes:c1,c2
    Plant for c1:p1
    Plant for c2:p2
    I m going to create and transfer stock from p2 to p1.
    Here i m using stock transport order with billing(SD)
    Purchase org for c1:porg1
    Vendor for c1,porg1:v1
    I assigned plant p2 in additional purchase data of vendor v1.
    Sales area for c2:sorg2,ds2,d2
    Customer for sales area(sorg1,ds1,d1):cust1
    Now i go to mm->purchasing->purchase order->setup for stock transport order
    > for receiving plant p1 i assign cust1,sales area(sorg1,ds1,d1)
    > delivery type for supplying plant:NLCC
    >checking rule RP.
    i assigned doc.type UB into receiving plant p1 and supplying plant p2.
    Then, in ME21N used doc type UB, these r the errors::::::::::::::::::::::::::::::
    *1st Error -Material 1 not maintained in Plant 2.
    2nd Error - Customer 1 does not exist (please check entry in plant 1)
    3rd Error - Not possible to determine shipping data for material1)*
    I already maintained all this.
    The doc type NB also I tried ,,,,,,,but same errors r being shown.
    Also where to create the inter company a/cs for billing?
    Please check the attached file for the error and let me know.
    Thanks & Regards
    Keerthi ...

    Business partner
    ●     Vendor master u2013 supplying plant
    Create the vendor for the purchasing organization of the receiving plant.
    Assign the vendor to the supplying plant in the vendor master record.
    From the menu, choose Logistics ® Materials Management ® Purchasing ® Master Data ® Vendor ® Purchasing ® Change (Current). Go to the Purchasing View and choose Extras ® Additional Purchasing Data.
    ●     Customer master u2013 receiving plant
    Create a customer master record for the receiving plant. From this, both the address and the data that is relevant for shipping point determination, such as transportation zone and shipping condition are taken.
    From the menu, choose Logistics ® Sales and Distribution ® Master Data ® Business Partner ® Customer ® Create.
    The above is from help.SAP:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm
    Plz check this link for tht information.
    So, basing on this: I have customer 1 and vendor 1 for CC1......
    --> Customer 1 is assigned to the receiving plant with sales area1 in setup STO configuration.
    --> Vendor 1 is assigned to the supplying plant in the vendor master.
    --> My question for u is:
      1)  In ME21N, in the vendor field u assign the vendor from CC1 or CC2 (Because it says the vendor - external supplier if u read in F1 in tht vendor filed)
      Company code , Purc Org, plant all this will be from CC1 in ME21N, right?????????
    Material exists in both the plants P1 and P2.......right?????
    2) How to configure the inter - company accounts for the billing in sd for this STO scenario.???
    Please clarify these things.....
    You will be appreciated and rewarded too.
    Thanks
    Keerthi

  • How to implement issuing stock in-transit for stock transport orders

    Hello,
    We are using stock transport orders in SAP. At the moment the supplying plant does a post goods issue for the delivery, the stock in-transit is "owned" by the receiving plant. Our Finance department wants this to be changed in such a way that the stock will be owned by the issuing plant until it has been received by the reciving plant.
    It seems there is a possibility to do that, but I can not figure out what exactly needs to be done. Can someone explain to me the steps that need to be taken to implement this?
    Thanks,
    Ed

    Try MB5TD. Please also check OSS notes 1120843, 1268193, 925384.
    Edited by: Csaba Szommer on May 22, 2009 8:28 AM

  • Automatic Post Goods Issue Of Stock Transport Order

    Here is the scenario:
    We are using stock transport order to logically move inventory from one company to another company inside the same physical location. The material# is the same but the plant# is different.
    Process is as follows:
    Associate enters the purchase order
    If inventory exists - delivery is created automatically
    The delivery is also auto picked
    Currently, we have the inventory to PGI in a batch job several times a day.
    However, the user would like to have the inventory - move as soon as the delivery is created.
    Does anyone know of any technique - to post the inventory immediately.
    I was thinking along the line of a workflow/create of an idoc (WHSCON) to faciliate this.
    Kind Regards, Steve

    You could simply scedule the batch job to PGI right after the delviery creation job runs (just delay it a few seconds after the longest period of time the delivery creation job runs).
    So there would only be a very short delay, Looking at vl10g now to see is auto PGI is an option but I am thinking it is not
    (I will update my post if I find it is)
    Edit: It doesn't look like a standard option but I would imagine you could change a function code profile with custom user exit to trigger goods issue

  • Error occuring while creating a Delivery for Stock transport order

    Hi,
    I am getting error while creating the delivery for thr stock transport order.The error message is given below.
                                                                                    Error Log for coll. run 0001248218                                                                               
    4       6000038321 000010 Only 0 ST of material F784100 available                                   
         4       6000038321 000010 An item with no delivery quantity is not permitted. Item will be deleted. 
         4       6000038321 000020 Only 0 ST of material F784100 available                                   
         4       6000038321 000020 An item with no delivery quantity is not permitted. Item will be deleted. 
         4       6000038321 000030 Only 0 ST of material F784100 available                                   
         4       6000038321 000030 An item with no delivery quantity is not permitted. Item will be deleted.                                                                               
    The stocks are present in the plant.
    Can anyone help me to solve this issue?
    Thanks
    Srinivasan

    Hi,
    Check in
    SPRO--IMG-MM-IM and PI---stock determinationassign stock determination in applications---Inventory management
    Check for 641 or 647,there is a SD rule assigned.
    Regards,
    Deepak.

  • Commitment Item error in Stock transport order

    Hi all
    I have a stock transport order (STO) for a material non valuated in both sending and receiving plants.
    While creation , there is an error with respect to completion of an "committment item" *.
    If I input  the committment item in  STO create transaction in R3 , the STO is  saved  (permitting blank account assignment for the STO item  as intended)  and there is no further issue till post goods issue in sending plant or GR in receiving plant.
    The problem is however that this STO is triggered from APO and transferred via CIF to R3 while there is no chance to input the commitment item. This results into a CIF error with the STO not created  in both R3 and APO.
    Is there a way I could bypass this "committment stuff" in this situation?
    Thanks in advance
    Anton
    *The exact error message is as follows;
    "  No commitment item entered in item 00001 plant < >
       Message no. FI311
    Diagnosis
    The posted document contains at least one company code in which Funds Management, Cash Budget Management, or Project Cash Management is active. Therefore you must enter a commitment item in all involved company codes.
    Procedure
    Enter a commitment item.
    If you cannot enter a commitment item, check with your system administrator that your account assignment derivation is adjusted so that the system can automatically derive a commitment item from another account assignment, or from the G/L or cost element.   "

    Hi,
    Did you try using derivation rule using FMDERIVE in case funds management is active.
    Please also refer to the link below which guides on the item category to be assigned in Commitment item.
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/f0/ca5716260211d28a430000e829fbbd/frameset.htm
    Regards
    K.R

  • Stock Transport Order u2013 Duplicate goods receipt quantity

    We implemented the scenario: the stock transport order process with SD. To post the goods issue , we have created a new goods movement  type (937) with reference to the movement type: 641, to differentiate these movements of other goods movements that are made in the company, because in this case, for issuing plant it is necessary to manually confirm these goods issues in WM (We need use storage bins in issuing plant). The outbound delivery, in issuing plant, is created through the transaction VL10B with reference to Stock transport Order, and goods issues is posted using transaction VL02N. In receiving plant, we use transaction MIGO to post goods receipt.
    Then, when we post the goods receipt for one replenishment delivery in Transaction MIGO, the system issues error message: M7022 telling us: u201Cthat the stock in transit has been exceeded by XXXu201D. The difference between the stock in transit and the Quantity in Unit of Entry is exactly equal to the quantity that was reported in the goods issue in Issuing Plant (outbound delivery). That is, Quantity in Unit of Entry is duplicated with respect to outbound delivery quantity. But if the goods receipt is posted with reference to the stock transport order, the Quantity in Unit of Entry is calculated correctly and corresponds with the quantity of outbound delivery of the issuing plant. This does not happen when using the standard goods movement type 641. As mentioned above, we have configured Warehouse Management for issuing plant.
    The only difference between the standard scenario and implemented one in the company is the goods movement type, which is a copy of movement type 641. So, my question is: Can not copy the goods Movement type 641 (Transfer to stock in transit)? Please, I appreciate your support to resolve this issues.
    Best regards,

    All goods movements are being posted in the same unit of measure (base unit of measure ), since the material has no alternative units of measure configured. And we think that has to do with the movement type, because when using the standard movement type (641), the whole process is flowing properly. However, when using the new movement type, the system behaves the way it was explained earlier.
    Through various tests, we identified that the quantity is duplicated  when the table T321 (Assignment MM Movement Type --> MM-WM Movement Type) and  the IMG view V_156S_WM (Reference Movement Types for Warehouse Management) are set, since it also was created a new movement type for WM. For this reason we think that the problem lies in the configuration of the new movement type.
    Anyway, thanks for your help.

  • Overdelivery in intra-company stock transport order

    Hello,
    I have the following scenario - I have two plants, 1000 and 2000, both under the same company code.
    I transfer 450KG of material 123456 from plant 1000 using STO with SD (mvt. type 641), material is packed in HUs. In the receiving plant, the HUs are being place on a weight to check their actual weight. It;s possible for the actual weight be greater than the GI weight of 450KG (for example, due to weight scale accuracy issues) . When doing GR, I need to be able to receive quantity greater than the GI quantity. That is not allowed in stock transport order (per note 212387). For the same scenario with intercompany STO (GI mvt type 643) I'm able to post GR quantity which is greater than GI qty.
    Any suggestion on how to solve this? Can I create a customer order type that is both intra-company and allows for overdelivery?
    Thanks,
    Yossi

    a overdelivery does not make any sense in stock transfers, you would solve the problem of the stock accuracy in the receiving plant, but at the same time you create another problem with a negative stock in transit, that never gets cleared.
    a STO having stock left in transit is never considered as closed. even intercompany stock transfers are not considered as closed, even you can receive more than issued.
    Latest when archiving purchasing documents then you will see all your error in the process design, because only closed business cases can be archived.
    in stock transfer business you always have to care about both sides, you cannot just care about the receiving plant and ignore the problems of the sending plant.

  • Intra Company Stock Transport Order

    Hi,
    This is a scenario of Intra Company Stock Transfer (using Stock Transport Order with document type UB) from one manufacturing plant to another manufacturing plant within the same company code.
    I have created STO, prepared Outbound Delivery with T-Code VL10B and did PGI. Billing was done with T-code VF01 and Outbound Excise Invoice was created with T-Code J1IIN
    While doing Goods Receipt in the Receiving plant with the T-code MIGO, when I referred the outbound excise invoice that was created in the previous step with the T-code J1IIN (put Excise Invoice No. and Date), I got the following error message "Excise invoice doesn't exist in the supplying plant" and not any Excise Value is flowing from the Excise Invoice in the screen of MIGO.
    The CIN configuration and master data in J1ID seems to be ok.
    Please provide the expert opinions to overcome the issue.
    Thanks in advance
    Rajesh Praveen

    I did Goods Receipt with reference to Outbound Delivery in the Receiving Plant without referring any Excise Invoice Number (as our system has been designed now like this). I updated part RG23A part 1 using the material document number (generated as a result of Goods Receipt) in J1I5.
    Now I am trying to post RG23A part 2 in J1IEX with reference to the material document number (generated as a result of Goods Receipt) and putting the Excise Number created in J1IIN earlier. The system is picking BED, ECS and SECess values but the value of Base Value is not being picked up as a result of which I am not able to post the Excise Invoice.
    Please provide some idea to resolve this
    Thanks in advance

  • Stock Transport Order between Two Company codes

    Dear All
    Scenario-- Stock transport order Between two company codes.
    The valuation of Comapny Codes is at Moving Average Price.
    I have a scenario
    MAP of Issuing Plant-- Rs. 10 / kg
    I am able to pick up the price of Rs.10 (MAP) of issuing plant while creating PO.
    in receving plant.
    At the time of Goods issu the MAP has changed & become Rs.12/kg. Hence the goods issue takes place at Rs.12/- perkg.
    When we make GR at receiving plant ,the valuation of GR is at Rs.10 i.e at PO price.
    Is it possible to have a GR valuation at Goods issue price for that delivery note?
    Request Your feedback urgently.

    The invoice has the material costs at time of goods issue.
    You receipt is valuated to PO price. But when you post the invoice, then the MAP is adjusted,
    By setting up EDI, SAP will probably post the invoice before the goods receipt is done, hence the GR should be valuated with the invoice price.
    from Note 518368 - FAQ: Valuation for the purchase order;
    With which price is the goods receipt posted for a purchase order?
    Answer:
    If the goods receipt is executed before the invoice receipt, the goods movement is valuated with the purchase order price. If an invoice is already posted, the system uses the price of the invoice. If a partial invoice is received, the partial quantity corresponding to the invoice is valuated with the invoice price, the rest is valuated with the purchase order price.
    For more detailed information, refer to both the documentation of the material valuation and Note 380883.
    see as well Note 547570 - FAQ: VPRS in pricing

  • Stock transport Order

    Dear All
    Scenario-- Stock transport order Between two company codes.
    The valuation of Comapny Codes is at Moving Average Price.
    I have a scenario
    MAP of Issuing Plant-- Rs. 10 / kg
    I am able to pick up the price of Rs.10 (MAP) of issuing plant while creating PO.
    in receving plant.
    At the time of Goods issu the MAP has changed & become Rs.12/kg. Hence the goods issue takes place at Rs.12/- perkg.
    When we make GR at receiving plant ,the valuation of GR is at Rs.10 i.e at PO price.
    Is it possible to have a GR valuation at Goods issue price for that delivery note without entering the invoice before Good Receipt?
    Request Your feedback urgently.

    I mean that it is possible to do the GR valuation at goos issue price if we make Invoice verification prior to GR.
    I want to know whether any other solution is avialable?

  • Excise Duty handling for Inter company Stock Transport Orders in SAP 4.6C

    I want to handle Excise Duty handling for Inter company Stock Transport Orders in SAP 4.6C. I know that SAP has provided standard solutions in 4.7C by giving one standard table OIH09 which can be maintained through Customisation.
    In 4.6C, even the Goods issue & Goods receipt button in item details of Stock Transport order is not available.
    Is there any work around for the same.

    In IS-OIL, cross company postings were stopped with Note #  623910 & would
    require a core modification to achieve this functionality.

  • Stock Transport Order of Handling Unit

    Hello All,
    I create a stock transport order for a material that is packed, at the point of issuing the material out, i get the following message:
    "HU item contains different data than the stock posting
    Message no. HUGENERAL319
    Diagnosis
    The stock that is to be posted is not in handling unit .
    System Response
    The system cannot post this material.
    Procedure
    Check the accuracy of the HU and IM inventories. If they are correct, contact your system administrator about this problem."
    Please how do i solve this.
    thanks.

    It seems in delivery one line item is not packed.Check is all the line items has the same HU location or not.If any item has different location then check is the line item related to HU location.Check all line items are packed or not in Pack box.If any thing not packed then pack and do PGI.System should allow the PGI.

Maybe you are looking for