Stock Transport Order - Material Costs

Hi,
We have created one stock transport order with two parts (for example part A and part B). The problem is, for Part A, condition type Z101 is fetching the cost of current period but for Part B same conditin type is fetching the cost of previous period. Ideally both should be current period.
I have check Material master and also condition type but could not figure this out.
Could you please let me know whereelse I can look for..?
Thanks & Regards,
Samay Mehta

Sanjay -
Ut question is vague.
check the condition records. Some thing might went wrong in setting up the condition records.
Thanks,
Shiva.

Similar Messages

Stock Transport Order Without Delivery

I m trying to transfer stock from one plant to another (within same company) without delivery.
what all configuration do i need to do.
pls. guide.
I m little bit confused over stock transfer,
Regards,
Pramod Kumar

Oh no, not at all! This forum is meant to answer all your problems!
Configure Inter company Stock Transport Order
Material should exist in both the plants (Delivering & Ordering),
Internal customer should be assigned to the ordering plant ( MM -> Purchasing ->
Purchase Order -> Setup stock transport order -> assign the internal customer to the
ordering plant and assign the Sales area of the internal customer.
Assign its Sales area to the delivering plant
Assign the document type and Delivery type NB and NLCC
Assign the Supplying plant --> Receiving Plant --> NB
Take the delivering plant and assign the sales area.
Vendor master has to be created and assign the supply source (Delivering Plant).
Create a purchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assign the purchase order
number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery
document.
Billing (Intercompany pricing conditions should be set).
AND
1. Customer No. for the Goods Receiving Plant - OMGN
2. Availability Check- Checking Rule (if necessary) - OMGN
3. Assign a Delivery Type for the Delivering Plant - OMGN (for Stock Transport Orders,
NLCC)
4. PO type (which i believe you have done) - OMGN
5. Assign Vendor No. to the Supplying Plant (done) - VK02
6. Assign Customer No. to the Purchasing Plant for the Inter-Company Invoice (but you
need to assign this to the Sales Organization pre-assigned to the Purchasing Plant),
IMG-SD-Billing-InterCompany Billing-Define Internal Customer No. by Sales Org
***and by the way for the Invoice to work between Cross-Company Plants, you need
also to have a Sales Org for the Supplying Plant and a Pricing Determination Procedure
STO:
STO CONFIG:
The following steps have to be followed in order to configure stock transport order
between two plants.
1. Create a vendor for the Company code of the receiving plant using account group 0007
via T-Code XK01.
2. In the purchasing data view assign the supplying plant and the schema group
3. Create customer with the sales area of the vendor.
4. The shipping conditions, the delivering plant and the transportation zone determine the
route in the STO.
5. In the pricing procedure determination relevant to the STO assign document pricing
procedure and customer pricing procedure to get the pricing in the invoice.
6. Maintain condition records for pricing condition.
7. Maintain carrier as a partner in the customer master.
8. In OMGN select the supplying plant and assign the company code and sales area.
Similarly select the receiving plant and assign the company code and sales area (The
company code to which the plant is assigned to).
9. Assign the delivery type and checking rule to the document type.
10. And finally, assign the purchasing document type to the supplying plant and the
receiving plant.
11. Create the STO using T-Code ME 21N and save.
12. Check for release strategy if any and release using T-Code ME 28.
13. Create delivery in background using VL10G.
14. If delivery is created, it is an indication of correct configuration and master data
creation.
Stock transfer between two plants in deffernet company codes is known as inter company
stock transfer.
Material shoud be maintained in both supplying and receiving plant MM01
Sotck should maintain only in supplying plant MB1C
Create receving plant as a customer in suplying plants company code and sales area
XD01
Assign this customer number in receving plant detials OMGN
Assign supplying sales area in supplying plant details OMGN
Assign delivery tupe NB for in combination of supplying/ receving plants.
Create STO ME21N
As it is normal there in the item details wer should get shipping date i.e customer number
Go for Deliveryy VL10B
Shipping point *****
Select PO go for execute
then select the delivery then go for delvy ............create delvy,,,, delvy nubmer generated.
Goods Issue VL02
Delvy doc **********
Click on picking
enter the picking qty
Click on PGI
in the mean time check in the PO history you will get the details
Goods receipt MIGO
Stock overview the stock will be updated....

Change the valuation class of material [Stock transport order scenario]

Dears,
Client would like to change the valuation class of material.
There is no open Purchase order/Process order/Purchase requistion and stock in plant.
Scenario- One Stock transport order is created.
For same goods issue (351-issuing plant) and goods receipt (101-receiving plant) is done.
When we are going to change the valuation class of said material, message is "purchase order is open
and it shows the no of STO [for which receipt and issue is done]"
To resolve this issue we had first delete the STO line item no(ME22N). Then change the valuation class.
(this allows). and then undelete the STO line item. Through this we can change the valuation class of material.
Please advise in such business process that this is right way or there may be other option.
Thanks & Regards
Rajan

rajanshah219,
Here's my take on how to fix:
*Manually change Config TCode OMT4 - change message MM 326 & 327 to type "W" (if open order exists...now you can enter through warning messages)
*If inventory exists, then issue out of stock to a cost center
*Change valuation class
*Put stock back into inventory (reverse to that same cost center) Note issue out and reverse back into inventory must happen in the same posting period.
**Valuation class should be changed as expected
**Manually change config TCode OMT4 - change message MM 326 & 327 back to type "E"
Thanks,
Jason

Freight Cost in Stock Transport Order

Hello:
We have requirement where we want to include freight charges into inventory valuation of material in receiving plant of stock transport order. Is it possible using shipment cost document of LE-TRA module?
If yes, How can I do it??
Also, I want have different pricing conditions like washing charge, Demurrage etc. These pricing conditions are included in pricing procedure. Can I post value of these conditions in different G/L accounts? If Yes then How??
Also I want to crate a multi dimensional freight rate condition using Distance, Weight. How can I do this?
I will really appreciate your response or any docs you have on this subject.

Hi dev,
We did something similar last week. To charge the freight cost to the receiving party we did a manual service entry sheet for that.
We created a separate Po with Transport vendor and the receiving plant and account type is Z shipment costing and service item description as intercompany freight.
You will specify the limit of the amount here, and specify the G/L account here. Now create the service entry sheet withthe freight amount and settle.
I think you can follow the similar thing with additional lines for your requirement for other charges.
Since we want let the receiving plant pay the freight we didn't create the shipment cost document of LE-TRA.
Let see if any other suggestions comes.
Regards,
ratna

Freight cost within Stock transport order

Hi MM experts,
We have created a stock transport order to shift material from one plant to other plant and want to book the freight cost while receiving the same material at receiving plant during MIGO.
The problem we are facing is, that no accounting document gets generated by the system while doing MIGO against delivery created for STO
The prompt response for the same will be highly appreciated please.
Regards,
Pawan Khurana

Hi
I believe you might be using STO without delivery.
In case of stock transport order, the material document associated FI document will be generated during GI.
So, please display the GI document (mvmt type 351) and check for the FI document.
warm regards
sairam akundi

Stock Transport Order for non valuated material

Hello,
I am creating a Stock Transport Order for non-valuated material. I posted GI for STO mvt 351 and it decreases stock from issuing Storage Location, however when I am posting GR for STO mvt 101 the Storage Location field is not there in MIGO and after posting the quantity does not increase in receiving Storage Location which is not expected. Note that both issuing and receiving Plants are the same and the material type has quantity update in the Plant.
Also in the STO the system is asking for Account Assignment Category which I do not need because there are no transportation costs. Can i overcome that ?
Thanks,
Wael

Hi,
The quantity update is set for the material type in the plant as I mentioned. Also since both issuing and receiving plants are identical and there is stock in the issuing SLoc this means quantity update is active.
Thanks

Delivery costs in stock transport order

Dear SAP experts,
We want to add certain delivery cost in the stock transport order.
We create a new pricing schema with 3 delivery cost conditions "Z" conditions. The new pricing schema is assigned to the stock transport order doc type.
In transaction code me27, when the try tp enter the delivery cost conditions by clicking on the conditions icon, system given an error message saying that "Function not possible for this item". Message No. 06096.
Pricing is as follows -
STKP - Stock transfer price
Z001    10% on STKP
Z002     2% on STKP
Z003     1% on STKP
Kindly help.
Thanks & Regards,

Hi,
Check the following things
1. Make sure manual entry is allowed for Delivery Costs Condition
2. Make sure PO is not yet processed or no subsequent documents exists for the PO so that you can manually edit the PO using ME22N.
Thanks & Regards,

Stock Transport order - Transport cost on

Hi
What is the best way of accounting for Freight costs on a stock transport order, with and without using Logistics execution and limiting the transactions processed.
For Primary distibution between to plants where the cost are Variable based on km and fixeds based on points.
For intercompany stock transfer,

Hi,
For Logistics execution Enter the freight component in the STO, either based on qty or fixed value, the same can be paid against the invoice verification for the planned delivery cost once the Post Goods Issue / GR is done.
The other option will be a direct FI posting, but the same will not get inventorised if your inventory account is an auto posting account, the same will need to be charged off against some expenditure.
Regards
Merwyn

Stock Transport order Should not Reserve material

Hi
When i create a stock transport order the material is getting reserved.
What should be done so that material is not reserved against the stock transport order
Regds
RB

Hi,
Check in OPJJ whether auto reservation is checked
Regards

Proforma Invoice (F8) for Stock Transport Order

With regard to intra-company STO, we have a specific requirement:
Referencing delivery document generated using Xn: VL10B (delivery from Stock Transport Order), we create proforma invoice type F8. Subsequently, excise invoice is created referencing the proforma invoice.We need to capture the material cost plus 10 % of material cost as PR00 value in the invoice.
Problem:
However, here comes the problem: condition type PR00 does not come automaticcally in the proforma invoice, though pricing procedure has PR00 condition type. We have to manually entere the PR00 condition type for every line item (a routine calculates 110% of the value once value is enetered in the manually entered condition)
Is it the standard system behaviour ? Any way out?
with kind regards
Muraleedharan.R

Hi,
Have you maintained the condition records for PR00 , if not than you have to enter it manually at the item level .
If your price is same for all the items than maintain use header condition or else at item level you have to enter PR00 item by item.
Regards,
Krishna O

Commitment Item error in Stock transport order

Hi all
I have a stock transport order (STO) for a material non valuated in both sending and receiving plants.
While creation , there is an error with respect to completion of an "committment item" *.
If I input the committment item in STO create transaction in R3 , the STO is saved (permitting blank account assignment for the STO item as intended) and there is no further issue till post goods issue in sending plant or GR in receiving plant.
The problem is however that this STO is triggered from APO and transferred via CIF to R3 while there is no chance to input the commitment item. This results into a CIF error with the STO not created in both R3 and APO.
Is there a way I could bypass this "committment stuff" in this situation?
Thanks in advance
Anton
*The exact error message is as follows;
" No commitment item entered in item 00001 plant < >
Message no. FI311
Diagnosis
The posted document contains at least one company code in which Funds Management, Cash Budget Management, or Project Cash Management is active. Therefore you must enter a commitment item in all involved company codes.
Procedure
Enter a commitment item.
If you cannot enter a commitment item, check with your system administrator that your account assignment derivation is adjusted so that the system can automatically derive a commitment item from another account assignment, or from the G/L or cost element. "

Hi,
Did you try using derivation rule using FMDERIVE in case funds management is active.
Please also refer to the link below which guides on the item category to be assigned in Commitment item.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/f0/ca5716260211d28a430000e829fbbd/frameset.htm
Regards
K.R

Stock Transport Order between Two Company codes

Dear All
Scenario-- Stock transport order Between two company codes.
The valuation of Comapny Codes is at Moving Average Price.
I have a scenario
MAP of Issuing Plant-- Rs. 10 / kg
I am able to pick up the price of Rs.10 (MAP) of issuing plant while creating PO.
in receving plant.
At the time of Goods issu the MAP has changed & become Rs.12/kg. Hence the goods issue takes place at Rs.12/- perkg.
When we make GR at receiving plant ,the valuation of GR is at Rs.10 i.e at PO price.
Is it possible to have a GR valuation at Goods issue price for that delivery note?
Request Your feedback urgently.

The invoice has the material costs at time of goods issue.
You receipt is valuated to PO price. But when you post the invoice, then the MAP is adjusted,
By setting up EDI, SAP will probably post the invoice before the goods receipt is done, hence the GR should be valuated with the invoice price.
from Note 518368 - FAQ: Valuation for the purchase order;
With which price is the goods receipt posted for a purchase order?
Answer:
If the goods receipt is executed before the invoice receipt, the goods movement is valuated with the purchase order price. If an invoice is already posted, the system uses the price of the invoice. If a partial invoice is received, the partial quantity corresponding to the invoice is valuated with the invoice price, the rest is valuated with the purchase order price.
For more detailed information, refer to both the documentation of the material valuation and Note 380883.
see as well Note 547570 - FAQ: VPRS in pricing

Procurement cycle in third party order and stock transport order.

please provide me in steps the procurement cycle in third party order and stock transport order.

Hi,
STO Process: -
1.Create a vendor for the company code of receiving plant, using account group :0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In Pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings , Create the STO using T-Code:ME21N and maintain pricing conditions of freight and Save.
11. Create Delivery :VL10G
Click on the Background Button after selecting line item
A message is flashed : See log for information> next Click on Log for delivery creation Button >click on line item>click on document button to get Delivery document No
12. Picking, PGI:VL02N
13. Billing:VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Pricing configuration for STO: -
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
You can create new freight / delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08 and also assign the Accrual Key to this and do the Account Determination for this Accrual Key in OBYC
At the time of PGI, following accounting entry will get generated;
Stock A/c - Dr - 110 INR (Receiving Plant)
Stock A/c - Cr - 100 INR (Supplying Plant)
Freight Clearing A/c - Cr - 10 INR (Supplying Plant)
Third Party Process Flow: -
1) MM01 - General Item category Group should be BANS in basic view of material master.
2) VA01 - Creation of sales order with VA01 transaction in SD module
3) When sales order is created system automatically creates a PR for the material with item category as "S"--> Third Party Item
4) ME21N - Directly PO with item category as "S" and delivery address as customer address
5) MIGO - Statistical GR by MM ( When it is made goods are received and delivered)
6) MIRO - Invoice by MM for vendor
7) VF01 - Billing by SD on Customers

Freight accrual - Stock Transport Order - Moving Average Price.

Hi all
   I am trying to add delivery costs (freight accrual) to Stock transport order, where the material in receiving plant is valuated at Moving Average Price (MAP). So, the freight cost is getting rolled over into the material price in the receving plant because of MAP valuation.
    But my client doesnot want that. Instead we want the freight accrual to post to a expense or COGS freight account. Is there way to control this when material is valuated at MAP in receiving plant?
Thanks
Vamsi

Currently, with the outbound delivery for STO and PGI, the following the accouting document is generated.
Cr Inventory Account (sending plant)   10000
Dr Inventory Account (receiving plant) 10200
Cr Freight Clearing Account                       200
Where as I want the accounting document as follows when outbound delivery is created.
Cr Inventory Account (sending plant)   10000
Dr Inventory Account (receiving plant) 10000
Dr COGS Freight Account                          200
Cr Freight Clearing Account                       200
Edited by: VamsiM on Sep 14, 2011 12:17 AM

SRM 7.0 & Ordering for stock / inter-company-code stock transport orders

Hello SRM Colleagues,
We are implementing SRM 7.0 used with ECC 6.0 and the client has the requirement to be able to order goods for stock and to initiate the inter-company-code stock transport orders (which I mean is actually and MM standard function).
Any advice about this topics please?
Thanks in advance,
Michal

Hi Michal,
The client want's to use SRM as a tool for issueing all requisitions among the company and transfering it to ERP.
Seams, there will be limitations.
Does this mean that your client will not use ECC MRP for planning the intercompany requirements. This is just for my calrification.
IF you are using calssic scenario there will be limitation while you create SC for the intercompany requirement, as it is required to falg "Order as direct material"(for direct stock procurement) in the SC system starts treating this as a extended calssic scenario to overcome this you have to enhance and trick the system by assiging as dummy cost object to SC cart in the background and strip off the cost object while sending the SC to ECC for creating PR or PO as per your client requriement.
Is your client requirement only restricted to inter company procurment using SRM or do they want to use SRM for all direct procurement(project stock, consignemnt, subcontracting). Irrespective of Classic to Extended classic SRM will not support out of box all the specail procurement scenarios.
with regards
Manjunath

Stock Transport Order - Material Costs

Similar Messages

Maybe you are looking for