Stock Transport Order : Plant to Plant

Hi All,
When doing a stock transport order, it is saying there is no inventory available for XXXXXXXXx, when we do have inventory. We have been shipping these and now all of a sudden there is a problem.
Please let me know, what could be possible reasons for this message.
Regards
Venkat

Hi Venkat,
Please check the following points for the material :
1. Whether you have availability check in place during STO creation and Saving.
2. If yes, can you check what are stock it going to consider , whether you have considered open STO yet to be delivered.
3. on a micro level just check whether the Sloc enterd in STO is the correct.
Please reward if it helps.
Thx,
MJ

Similar Messages

Stock transport orders within one plant

Hi all,
I am wondering how to process a stock transport order, that is created to transfer stock within one plant (from one stor.loc to another). My general scope is to use the shipping module to process the logistic part of that transaction.
So I created a stock transport order (purch. order type UB) where the shipping plant and the receiving plant are identical. Now I can't create the delivery note (VL10B does not show the order. In SAP docu, I found only a hint that a STO can be also used within one plant, but how to create the delivery note?
Thanks to all for answers
Jörg

Hi
Please go thru the following navigation to set up STO between Storage location with delivery.
SPRO-> Material management -> Purchasing -> Purchase order -> Set up stock transport order -> step up stock transport order between storage locations
In first step Activate Stock transfer between storage locations and do other configurations.
Regards
Ramakrishna

Stock transport order for same plant -UB

Hi,
I created STO with UB and when created delivery giving error material has zero quantity. I checked in MMBE , stock is available.
Can nyone plese give soem solution and suggestions.
Thanks in Advance.
Smitha

Hi,
Then please check any safety stock has been assigned to the material, check it in the respective material master.
Also,
1. check the material movement in MB51.
2. check the STO's delivery schedule line, whether any delivery block has been maintianed.
3. check whether order is blocked for credit, you cna check it in VKM1.
Please check delivery date in schedule line of sales order same as delivery date in VL01N
Thanks
Hrishi
Edited by: Hrishi on Apr 18, 2011 3:54 PM

Stock transport orders between 2 plants

Hi,
Daily lot of STO orders will be booked,but i am getting one planned order comibining all STO's when i run MRP,i want individual planned order per each STO for finished product.

Hi,
In MRP4 view put 1 in individual/collective field and than again run MRP.
Probably this will solve your problem.
Reward points if it helps.
Rgds,
Anup Dubey

Inter - Company Stock Transport Order Issue

MM SAP Gurus,
When I try working on "inter company stock transport order between two company codes."
I found the errors while creating PO(using document type UB)
ie.
*1st Error -Material 1 not maintained in Plant 2.
2nd Error - Customer 1 does not exist (please check entry in plant 1)
3rd Error - Not possible to determine shipping data for material1)*
i couldnt find out the error................................
Here is the configuration done by me......
Company codes:c1,c2
Plant for c1:p1
Plant for c2:p2
I m going to create and transfer stock from p2 to p1.
Here i m using stock transport order with billing(SD)
Purchase org for c1:porg1
Vendor for c1,porg1:v1
I assigned plant p2 in additional purchase data of vendor v1.
Sales area for c2:sorg2,ds2,d2
Customer for sales area(sorg1,ds1,d1):cust1
Now i go to mm->purchasing->purchase order->setup for stock transport order
> for receiving plant p1 i assign cust1,sales area(sorg1,ds1,d1)
> delivery type for supplying plant:NLCC
>checking rule RP.
i assigned doc.type UB into receiving plant p1 and supplying plant p2.
Then, in ME21N used doc type UB, these r the errors::::::::::::::::::::::::::::::
*1st Error -Material 1 not maintained in Plant 2.
2nd Error - Customer 1 does not exist (please check entry in plant 1)
3rd Error - Not possible to determine shipping data for material1)*
I already maintained all this.
The doc type NB also I tried ,,,,,,,but same errors r being shown.
Also where to create the inter company a/cs for billing?
Please check the attached file for the error and let me know.
Thanks & Regards
Keerthi ...

Business partner
● Vendor master u2013 supplying plant
Create the vendor for the purchasing organization of the receiving plant.
Assign the vendor to the supplying plant in the vendor master record.
From the menu, choose Logistics ® Materials Management ® Purchasing ® Master Data ® Vendor ® Purchasing ® Change (Current). Go to the Purchasing View and choose Extras ® Additional Purchasing Data.
● Customer master u2013 receiving plant
Create a customer master record for the receiving plant. From this, both the address and the data that is relevant for shipping point determination, such as transportation zone and shipping condition are taken.
From the menu, choose Logistics ® Sales and Distribution ® Master Data ® Business Partner ® Customer ® Create.
The above is from help.SAP:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm
Plz check this link for tht information.
So, basing on this: I have customer 1 and vendor 1 for CC1......
--> Customer 1 is assigned to the receiving plant with sales area1 in setup STO configuration.
--> Vendor 1 is assigned to the supplying plant in the vendor master.
--> My question for u is:
1) In ME21N, in the vendor field u assign the vendor from CC1 or CC2 (Because it says the vendor - external supplier if u read in F1 in tht vendor filed)
Company code , Purc Org, plant all this will be from CC1 in ME21N, right?????????
Material exists in both the plants P1 and P2.......right?????
2) How to configure the inter - company accounts for the billing in sd for this STO scenario.???
Please clarify these things.....
You will be appreciated and rewarded too.
Thanks
Keerthi

Cannot Input Goods Receipt for a Stock Transport Order

Dear all,
I created a stock transport order from one plant to another. But in the following "MIGO" transaction, the system indicates "Document xxxxxxxxx does not contain any selectable items".
In the stock transport order, I simply input the supplying plant, material, the receiving plant for the material. The item category is "U" (Stock Transfer).
Anybody have any idea?
Thanks, Jerome

Hi
What is your process? is it via shipping or via only purchasing?
If it is ony via purchasing, have you moved stock from Supplying plant to stock in transit. Then you can make MIGO.
If it is via shipping, create delivery VL10B and PGI, Then do MIGO.
regards
Srinivas

Stock Transport Order Pricing Procedure

Dear Experts,
Please let me know the opssibility to configure pricing procedure for STO (Stock Transport order between two plants of same Company code..
Pls explain in detail

Hi,
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
Calculation Schema "RM2000" has condiiton type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
You can create new freight/delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08

Stock Transport Order deletion in case of GR

Hi all,
I have an stock transport order (STO) between plants with delivery output posted (Goods Issue) and also with a goods receipt in destiny plant.
Problem is that if I set deletion flag in STO, system allows me to do that without any warnings.
Is there a way to validate when a STO has been received by the destiny Plant?
Thanks & Regards,
AW

Yes. It is a standard behavior. System will allow to delete the line item which has completed the good issue and goods receipt both.
Actually the status of this STO got completed after you post goods issue and goods receipt.
It is also like normal PO, when goods issue and MIRO has done, then you can set deletion flag to line item. System will allow deletion flag for archive process.
If you want to restrict that, then you have to use badi or exit for that by your own logic.
You can use the badi ME_PROCESS_PO_CUST.

HELP for all 5 TYPES of STO Stock Transport Orders with detailed scenario

PLEASE help me understanding the detailed scenarios for all 5 TYPES of STO s
as in my day to day job activities , i frequently handles issues related to STO s
PLEASE HELP WITH DETAILED STEP BY STEP SCENARIOS

Hi Jagatram,
Standard SAP has the following methods For Stock transport order:
1) One Step Transfer stock without using purchasing documents; Use movement type 301.
2) Two Step Transfer stock without using purchasing documents; Use movement type 303 in Supplying plant and movement type 305 in receiving plant.
3) Using Standard Transport Order (STO) without delivery in two steps. STO created in T-Code ME27, receiving plant posts goods issue (for returns), movement type 351 and supplying plant post goods receipt from using movement type 101.
4) Using Standard Transport Order (STO) with delivery in one step. STO created in T-Code ME27, Receiving plant creates shipment and Goods issue document (for materials to be returned) with movement type 647 and goods receipt document with movement type 101 both created in one step.
5) Using Standard Transport Order (STO) with delivery in two steps. STO created in T-Code ME27, Receiving plant creates shipment and Goods issue posted (for materials to be returned) with movement type 641.Goods receipt is posted in the supplying plant, movement type 101.
6) Using Transportation scheduling agreement (TSA) with delivery in two steps. TSA created in T-Code ME37. Receiving plant creates shipment and Goods issue document (for materials to be returned) with movement type 641. Goods receipt is posted in the supplying plant, movement type 101.
To achieve it, necessary configurations has to be done in Tcode- OMGN.
SPRO>> Materials management>> Purchasing>> Purchase Order>> Set up Stock transport Order:
1. Plant: For the receiving plant, maintain customer No-Plant (If using STO with delivery), for the Sales Org, Dist channel and Division.
2. Checking Rule: Create checking rule.
3. Define checking rule : Usually no change required here.
4. Assign delivery type/checking rule: Assign the document type(UB) - Supplying plant- Delivery type(NL).
5. Purchasing document type: Maintain the supplying plant- Receiving plant relationships for the doc type-UB, either 1-step or 2-step, as per business.
Hope this helps!
Regards,
Shilpa

Stock Transport order with Freight Charges- Payable to an external vendor

Hello
we are implementing the stock transport order between two plants in SAP 4.7. The document type is UB and it has to be a two step process. We need to post the Freight Charges as well. The freight Provider is external vendor.
What is the best way of configuring this scenario for freight cost?
I did put the freight forearder vendor code on the conditiond tab detail of condition tyep FRA1 but can't do the invoice verification for the same.
Any tips are appreciated.

Hello,
This EhP4 feature addresses only the one step Stock Transport Order to subcontracting vendor for intra company.
Does anybody know how to do a two steps Stock Transport Order to subcontracting vendor for intra company?
By "two steps" I mean:
1- Goods Issue from supplying plant A to in-transit stock of the subcontracting vendor at receiving plant B.
2- Inbound Delivery Notification (IDN) at receiving plant B + Goods receipt against this IDN into the subcontracting stock at receiving plant B.
Thanks and regards,
Stéphane

Excise Pricing procedure for Stock Transport Order in MM with TAXINN

I am an SD guy running STO from manufacturing plant to sales depot
AND not able to create JEX proforma excise invoice from NL
to TEST my configuration, I created excise invoice in J1IS with respect to goods issue from NL from UB means configuration is ok
BUT base amount in J1IS is coming as zero because of missing excise conditions in MM STO pricing procedure
CAN anybody give me a sample EXCISE pricing procedure for STO
AND do i need to create records for the condition types in FV11 OR MEK1 please clarify
I know that calculation type 362 attached to BASB in TAXINN has something to do with this
I am able to see chapter ID in J1IS
And the relation between condition types in TAXINN and excise pricing procedure for STO
And I am able to create excise invoice in J1IG with zero excise values
I also maintained pricing procedure determination for JEX in OVKK that is document pricing procedure N pricing procedure JINSTOCK
I think my explanation is sufficient enough
please give A sample of TAXINN

Hi Yoga,
Here u not need to do VL10b.just follow this steps and try.
In PO,Document type is UB and Item Category is U.
After creating PO,In MB!B with reference that PO number and using movt type 541
then u can see that stock in Transit.Now u do GR with respect to PO number.
Thanks & Regards
Suresh.
> Hello MM Gurus,
>
> I am doing Stock transport order between 2 plants
> under same company code.
> I have maintained all the required settings.Following
> is the process flow.
>
> 1.Creation of Purchase order with document type
> UB.(ME21N)
> 2.Creation of outbound delivery with respect to
> Purchase order.(VL10B)
> 3.Post Goods Issue from the supplying plant. (VL02N)
> 4.Creation of Excise Invoice in supplying plant.
> (J1IS)
> 5.Goods receipt at the receiving plant.(MIGO)
>
> While I am doing Goods receipt in the receiving
> plant, system is giving an error
> message "Maintain Vendor for the Excise Invoice" -
> Message no. 4F185.
> Why this message is coming and how to resolve this?
>
> Thanks & Regards
> Yoga

Planning stock transport orders

Hello experts,
does anybody know how to create a purchase requisition per stock transport order when executing MD01/ MD02 process. For example, we have three plants, Z002, Z024 and Z025. If we create two stock transport order, one with plant Z024 and the other one with plant Z025, both supplying plant Z002 same material and same delivery date. When executing MD02 for plant Z002 the system groups all needs derivated from the two stock transport orders and proposes only one purchase requisition, but we need to create, in this case, two purchase requisition.
Thanks

Firt of all, I´d like to thank you for having answered so quick.
I had already tried what you tell me and the resault wasn´t as expected.
Thanks

Stock Transport Order Without Delivery

I m trying to transfer stock from one plant to another (within same company) without delivery.
what all configuration do i need to do.
pls. guide.
I m little bit confused over stock transfer,
Regards,
Pramod Kumar

Oh no, not at all! This forum is meant to answer all your problems!
Configure Inter company Stock Transport Order
Material should exist in both the plants (Delivering & Ordering),
Internal customer should be assigned to the ordering plant ( MM -> Purchasing ->
Purchase Order -> Setup stock transport order -> assign the internal customer to the
ordering plant and assign the Sales area of the internal customer.
Assign its Sales area to the delivering plant
Assign the document type and Delivery type NB and NLCC
Assign the Supplying plant --> Receiving Plant --> NB
Take the delivering plant and assign the sales area.
Vendor master has to be created and assign the supply source (Delivering Plant).
Create a purchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assign the purchase order
number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery
document.
Billing (Intercompany pricing conditions should be set).
AND
1. Customer No. for the Goods Receiving Plant - OMGN
2. Availability Check- Checking Rule (if necessary) - OMGN
3. Assign a Delivery Type for the Delivering Plant - OMGN (for Stock Transport Orders,
NLCC)
4. PO type (which i believe you have done) - OMGN
5. Assign Vendor No. to the Supplying Plant (done) - VK02
6. Assign Customer No. to the Purchasing Plant for the Inter-Company Invoice (but you
need to assign this to the Sales Organization pre-assigned to the Purchasing Plant),
IMG-SD-Billing-InterCompany Billing-Define Internal Customer No. by Sales Org
***and by the way for the Invoice to work between Cross-Company Plants, you need
also to have a Sales Org for the Supplying Plant and a Pricing Determination Procedure
STO:
STO CONFIG:
The following steps have to be followed in order to configure stock transport order
between two plants.
1. Create a vendor for the Company code of the receiving plant using account group 0007
via T-Code XK01.
2. In the purchasing data view assign the supplying plant and the schema group
3. Create customer with the sales area of the vendor.
4. The shipping conditions, the delivering plant and the transportation zone determine the
route in the STO.
5. In the pricing procedure determination relevant to the STO assign document pricing
procedure and customer pricing procedure to get the pricing in the invoice.
6. Maintain condition records for pricing condition.
7. Maintain carrier as a partner in the customer master.
8. In OMGN select the supplying plant and assign the company code and sales area.
Similarly select the receiving plant and assign the company code and sales area (The
company code to which the plant is assigned to).
9. Assign the delivery type and checking rule to the document type.
10. And finally, assign the purchasing document type to the supplying plant and the
receiving plant.
11. Create the STO using T-Code ME 21N and save.
12. Check for release strategy if any and release using T-Code ME 28.
13. Create delivery in background using VL10G.
14. If delivery is created, it is an indication of correct configuration and master data
creation.
Stock transfer between two plants in deffernet company codes is known as inter company
stock transfer.
Material shoud be maintained in both supplying and receiving plant MM01
Sotck should maintain only in supplying plant MB1C
Create receving plant as a customer in suplying plants company code and sales area
XD01
Assign this customer number in receving plant detials OMGN
Assign supplying sales area in supplying plant details OMGN
Assign delivery tupe NB for in combination of supplying/ receving plants.
Create STO ME21N
As it is normal there in the item details wer should get shipping date i.e customer number
Go for Deliveryy VL10B
Shipping point *****
Select PO go for execute
then select the delivery then go for delvy ............create delvy,,,, delvy nubmer generated.
Goods Issue VL02
Delvy doc **********
Click on picking
enter the picking qty
Click on PGI
in the mean time check in the PO history you will get the details
Goods receipt MIGO
Stock overview the stock will be updated....

Inter and Intra Company Stock Transport Orders

Hi All,
has anyone set up the following scenarios?
1. Intra Company Stock Transport Orders between 2 plants in the same company code and same Sales Org
i.e Plant 0001 (Supplying Plant) exists for Company Code 0001 and Sales Org 0001
Plant 0002 (Receiving Plant) exists for Company Code 0001 and Sales Org 0001
2. Inter Company Stock Transport Orders between 2 plants in different company codes and different Sales Orgs
i.e. Plant 0003 (Supplying Plant) exists for Company Code 0002 and Sales Org 0002
Plant 0002 (Receiving Plant) exists for Company Code 0001 and Sales Org 0001
We are unable to get both scenarios to work at the same time due to the fact that only one Sales organization for intercompany billing can be assigned to a plant.
Regards
Chris

Hi chris,
Followings steps are involved for configuring intra stock transport order.
Intra Company STO Scenario: Plant B receives material from Supplying plant A.
1.create combination of Shipping condition, Loading Group and Supplying plant.
2.Create Customer master with sales org, Distribution channel and Division.
3.Assign customer master to receiving plant with same Sales area.
4.Assign Delivery Type and Checking Rule.
5.Assign Document Type, One-Step Procedure, under delivery Tolerance.
6.Make Sure Assignment of sales organization - distribution channel - plant
7.Create material master with purchasing view in plant B.
8.Extend material master with sales view to plant A.
9.In Plant A create STO (UB), with supplying plant. Check for shipping point XXXX.
10.In Plant B create STO (UB), with supplying plant.Check for shipping point XXXX.
11.Create delivery for XXXX shipping points.
12. Post Goods issue.
Thanks,
Muth's

Sales order stock with stock transport orders

Dear all,
We are on ECC 6.0.
We are using intracompnay stock transport orders from one plant to other. Sales orders are created in one plant with a purchase requisition and then converted to a purchase order with order type UB on the supplying plant. The supplying plant is also defined as a customer using the different account group for the plant as customer.
When this purchase orders are delivered from the supplying plant using replenishment delivery NL we get an error performing the goods issue for the delivery.The error message is M7 184 -Sales order stock & & does not exist. System is checking for the sales order number in the supplying plant while performing the goods issue. However the sales order is in the receiving plant.
Does some body have an idea how to resolve this?
We are also using material ledger and the transfer pricing mechanism between intracompany sotck transfers.
Thank you in advance.
Regards,
Kartik Shah

Hello ,
i have the same issue.I checked in MD04 transaction and for this delivery i get this message
Diagnosis
The finish date of the order proposal lies in the past.
System Response
This exception is displayed in the MRP list and in the stock/requirements list.
This situation may occur if in Customizing for the plant in question, the automatic forward scheduling was switched off for MRP.
Procedure
Check whether the order proposal should be rescheduled.
anyone can help me ?
Regards

Stock transport order /stock in transit

Hello
For a stock Transport order scenario { Recieving Plant , Delivering plant } , the documented procedure is:-
1) stock transport order>Goods issue by delivering plant--
>stock in transit(valuated) -- >Unrestricted/inquality/blocked/consumption
just sticking to the above method, how many Material documents & accounting documents would be generated ?
Thanks

Hi,
It depends on your setting, whether you go for 2-step Stock Transport or 1-step.
If It is 1-step then 1 material document and 1 accounting document.
This material document will be of movement type 647 and stock will not come in transit, stock will directly get moved from Supplying Plant to Receiving Plant.
And if it is 2-step then 2 material documents and 1 accounting document.
1 material document for GI from Supplying Plant to Stock in Transit (Movement Type - 641), and another from stock in transit to receiving plant (Movement Type - 101).
And it will update PO History in both the cases.
You can config. this in SPRO > MM > Purchasing > Purchase Order > Setup Stock Transport order > Assign Document Type, One-Step Procedure, Underdelivery Tolerance > here activate "One-step" indicator if you want 1-step otherwise keep blank for 2-step.

Stock Transport Order : Plant to Plant

Similar Messages

Maybe you are looking for