Stock Transport Order Setup

Hi
I have to setup Stock transport order between plants in same company code through inventory route (by 351 movement). Kindly guide me for the
1.Standard customizing and master data setup required for the same.
2. Any additional Customizing & Master data setup required for the same in the Cin Scenario.(i.e. customer/ vendor relation etc.)
Regards
Arvind

Hi,
If you are doing STO through 351 mvt in MIGO , PLease follow the below steps:
Steps:
-Create a Stock Transport Order (ME21N, Purchase Order doc type UB)
-Process Goods Issue against STO (MIGO > Goods Issue > PO) u2013 movement type 351
-Process Goods Receipt against STO (MIGO > Goods Receipt > PO) u2013 movement type 101
Customisation:
1. Config: MM > Purchasing > Purchase Order > Set up Stock Transport Order > Assign Document Type, One-Step Procedure, Underdelivery Tolerance.
Here the source plant, destination plant and allowed STO document type is specified.
2. MM > Purchasing > Purchase Order > Set up Stock Transport Order >define shipping data for plant. Here create receiving plant as a customer and assign.
Regards
Ram

Similar Messages

Problem in creation of STO(stock transport order)

hi all SAP gurus,
i am facing the problem in creation of stock transport order with ME21N code. i m getting the error msg of "Not possible to determine shipping data for material in STO "
i have checked the stock transport order setup in customization. but not getting the clear idea to come out from this problem.
if anybody have the idea of " how to do the customization of stock transport order setup, pls. let me explain.
thnx in advance.
rgrds,
rajesh

Hi Rajesh,
when ur creating STO with UB doc type, then you have to maintain material in both the plants.
Regarding the error which is comming for you, you have to check the settings at
SPRO- IMG- MM-Purchasing-Set up stock transport order- Assign delivery type & Checking rule
here for document type UB and your supplying plant-XXXX select nothing for Dlv type(delivery type) and chr - 01 and after this save.
After this you create STO as you are doing and see what the system is prompting.
For any further clarification let me know.
Regards,
NJ

Tables for delivery and stock transport orders

Hi Members,
I have a requirement where i have to display (in a report output) a requirement quantity of deliveries and stock transport orders which are displayed in MD04 transaction for particular material and plant.
I don't know which tables these quantities sit into.
If you know please help.
Points will be suitably rewarded.
Reagrds,
Boby

>
Boby wrote:
> Hi Members,
>
> I have a requirement where i have to display (in a report output) a requirement quantity of deliveries and stock transport orders which are displayed in MD04 transaction for particular material and plant.
> I don't know which tables these quantities sit into.
> If you know please help.
> Points will be suitably rewarded.
>
> Reagrds,
> Boby
if you only have to display deliveries and stock transport orders you can take LIKP and LIPS for the deliveries and LTAK and LTAP for transport orders.
for all the other elements displayed by MD04 we would have to know about your setup: are you using dispo-areas (which would populate tables MDMA ...) so in that case please provide more information.

Inter - Company Stock Transport Order Issue

MM SAP Gurus,
When I try working on "inter company stock transport order between two company codes."
I found the errors while creating PO(using document type UB)
ie.
*1st Error -Material 1 not maintained in Plant 2.
2nd Error - Customer 1 does not exist (please check entry in plant 1)
3rd Error - Not possible to determine shipping data for material1)*
i couldnt find out the error................................
Here is the configuration done by me......
Company codes:c1,c2
Plant for c1:p1
Plant for c2:p2
I m going to create and transfer stock from p2 to p1.
Here i m using stock transport order with billing(SD)
Purchase org for c1:porg1
Vendor for c1,porg1:v1
I assigned plant p2 in additional purchase data of vendor v1.
Sales area for c2:sorg2,ds2,d2
Customer for sales area(sorg1,ds1,d1):cust1
Now i go to mm->purchasing->purchase order->setup for stock transport order
> for receiving plant p1 i assign cust1,sales area(sorg1,ds1,d1)
> delivery type for supplying plant:NLCC
>checking rule RP.
i assigned doc.type UB into receiving plant p1 and supplying plant p2.
Then, in ME21N used doc type UB, these r the errors::::::::::::::::::::::::::::::
*1st Error -Material 1 not maintained in Plant 2.
2nd Error - Customer 1 does not exist (please check entry in plant 1)
3rd Error - Not possible to determine shipping data for material1)*
I already maintained all this.
The doc type NB also I tried ,,,,,,,but same errors r being shown.
Also where to create the inter company a/cs for billing?
Please check the attached file for the error and let me know.
Thanks & Regards
Keerthi ...

Business partner
● Vendor master u2013 supplying plant
Create the vendor for the purchasing organization of the receiving plant.
Assign the vendor to the supplying plant in the vendor master record.
From the menu, choose Logistics ® Materials Management ® Purchasing ® Master Data ® Vendor ® Purchasing ® Change (Current). Go to the Purchasing View and choose Extras ® Additional Purchasing Data.
● Customer master u2013 receiving plant
Create a customer master record for the receiving plant. From this, both the address and the data that is relevant for shipping point determination, such as transportation zone and shipping condition are taken.
From the menu, choose Logistics ® Sales and Distribution ® Master Data ® Business Partner ® Customer ® Create.
The above is from help.SAP:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm
Plz check this link for tht information.
So, basing on this: I have customer 1 and vendor 1 for CC1......
--> Customer 1 is assigned to the receiving plant with sales area1 in setup STO configuration.
--> Vendor 1 is assigned to the supplying plant in the vendor master.
--> My question for u is:
1) In ME21N, in the vendor field u assign the vendor from CC1 or CC2 (Because it says the vendor - external supplier if u read in F1 in tht vendor filed)
Company code , Purc Org, plant all this will be from CC1 in ME21N, right?????????
Material exists in both the plants P1 and P2.......right?????
2) How to configure the inter - company accounts for the billing in sd for this STO scenario.???
Please clarify these things.....
You will be appreciated and rewarded too.
Thanks
Keerthi

Vendor determination for Intra company stock transport order

Team,
We need the vendor and the partner function to be determined for intra company stock transport order.
I have create Vendor and assigned the vendor to the plant code. When i create scheduling agreement with LU , the vendor filed is not getting updated as the agreement is with supplying plant.
Is there any possibility that the vendor code and the partner functions can be populated to the Intra company stock transport order.
Regards
Gobinthan G

Hi,
To plant, you have to assign customer. Create a cutsomer and assign it to the plant through following path.
SPRO-> Materials Management -> Purchasing -> Purchase order - > Setup stock transport order - > Define shipping data for plants.
Then you assign delivery type and checking rule as per following path.
SPRO-> Materials Management -> Purchasing -> Purchase order - > Setup stock transport order - > Assign delivery types and checking rules. Here you can create the assignment of po document type with delivery doc type and checking rule.
The last step is to maintain the all sales views of the material you tranfer, both of the receiving and sending plant.
Now you will get the tab 'shipping' in the purchase order item details section.
For intra company transaction as you said, in the vendor master, relevent customer code has to be updated. This will make suitable updation in sales process in line with your scheduling agreement / purchase order.
Thanks,
Hari.

Stock Transport Order Without Delivery

I m trying to transfer stock from one plant to another (within same company) without delivery.
what all configuration do i need to do.
pls. guide.
I m little bit confused over stock transfer,
Regards,
Pramod Kumar

Oh no, not at all! This forum is meant to answer all your problems!
Configure Inter company Stock Transport Order
Material should exist in both the plants (Delivering & Ordering),
Internal customer should be assigned to the ordering plant ( MM -> Purchasing ->
Purchase Order -> Setup stock transport order -> assign the internal customer to the
ordering plant and assign the Sales area of the internal customer.
Assign its Sales area to the delivering plant
Assign the document type and Delivery type NB and NLCC
Assign the Supplying plant --> Receiving Plant --> NB
Take the delivering plant and assign the sales area.
Vendor master has to be created and assign the supply source (Delivering Plant).
Create a purchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assign the purchase order
number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery
document.
Billing (Intercompany pricing conditions should be set).
AND
1. Customer No. for the Goods Receiving Plant - OMGN
2. Availability Check- Checking Rule (if necessary) - OMGN
3. Assign a Delivery Type for the Delivering Plant - OMGN (for Stock Transport Orders,
NLCC)
4. PO type (which i believe you have done) - OMGN
5. Assign Vendor No. to the Supplying Plant (done) - VK02
6. Assign Customer No. to the Purchasing Plant for the Inter-Company Invoice (but you
need to assign this to the Sales Organization pre-assigned to the Purchasing Plant),
IMG-SD-Billing-InterCompany Billing-Define Internal Customer No. by Sales Org
***and by the way for the Invoice to work between Cross-Company Plants, you need
also to have a Sales Org for the Supplying Plant and a Pricing Determination Procedure
STO:
STO CONFIG:
The following steps have to be followed in order to configure stock transport order
between two plants.
1. Create a vendor for the Company code of the receiving plant using account group 0007
via T-Code XK01.
2. In the purchasing data view assign the supplying plant and the schema group
3. Create customer with the sales area of the vendor.
4. The shipping conditions, the delivering plant and the transportation zone determine the
route in the STO.
5. In the pricing procedure determination relevant to the STO assign document pricing
procedure and customer pricing procedure to get the pricing in the invoice.
6. Maintain condition records for pricing condition.
7. Maintain carrier as a partner in the customer master.
8. In OMGN select the supplying plant and assign the company code and sales area.
Similarly select the receiving plant and assign the company code and sales area (The
company code to which the plant is assigned to).
9. Assign the delivery type and checking rule to the document type.
10. And finally, assign the purchasing document type to the supplying plant and the
receiving plant.
11. Create the STO using T-Code ME 21N and save.
12. Check for release strategy if any and release using T-Code ME 28.
13. Create delivery in background using VL10G.
14. If delivery is created, it is an indication of correct configuration and master data
creation.
Stock transfer between two plants in deffernet company codes is known as inter company
stock transfer.
Material shoud be maintained in both supplying and receiving plant MM01
Sotck should maintain only in supplying plant MB1C
Create receving plant as a customer in suplying plants company code and sales area
XD01
Assign this customer number in receving plant detials OMGN
Assign supplying sales area in supplying plant details OMGN
Assign delivery tupe NB for in combination of supplying/ receving plants.
Create STO ME21N
As it is normal there in the item details wer should get shipping date i.e customer number
Go for Deliveryy VL10B
Shipping point *****
Select PO go for execute
then select the delivery then go for delvy ............create delvy,,,, delvy nubmer generated.
Goods Issue VL02
Delvy doc **********
Click on picking
enter the picking qty
Click on PGI
in the mean time check in the PO history you will get the details
Goods receipt MIGO
Stock overview the stock will be updated....

How to control Inspection for Stock Transport Order Just like Reg Receipt

Hi Folks,
We do Stock transport order to bring stock to the dock from a Hub. I would like the inspection process (using inspection plan to drive) similar to the regular receipt.
I tried setting up material master with 08 , but in this case everything went to quality and all transfer posting done between storage locations created an inspection lot.
Basically i want to setup 2 inspection types for a material, 01 for regular receipt and something else for all stock transport order. Both should use the same inspection plan to determine the quality process.
Let me know if this is possible.
Thanks
Jithin

Again I am saying very much depends upon the process that you follow.
My way to look at it is "Main Intention of your is to cut down the inspection lots while transfering storage location to storage location".So what would I have preffered is
1.Either make copy of mvt type 311 & deactivate QM for that .Every time when I transfer material from Sto to Sto then use this movt type so that lot will not be generated.
or
2.Deactivate QM for 311 & only use the mvt type which is copy of 311 for STO orders along with 01.
can i setup the material with both 01 and 08 inspection type and will it work with inspection plan for both type of PO's?
Yes ,as per above explaination !!

Stock transport order /stock in transit

Hello
For a stock Transport order scenario { Recieving Plant , Delivering plant } , the documented procedure is:-
1) stock transport order>Goods issue by delivering plant--
>stock in transit(valuated) -- >Unrestricted/inquality/blocked/consumption
just sticking to the above method, how many Material documents & accounting documents would be generated ?
Thanks

Hi,
It depends on your setting, whether you go for 2-step Stock Transport or 1-step.
If It is 1-step then 1 material document and 1 accounting document.
This material document will be of movement type 647 and stock will not come in transit, stock will directly get moved from Supplying Plant to Receiving Plant.
And if it is 2-step then 2 material documents and 1 accounting document.
1 material document for GI from Supplying Plant to Stock in Transit (Movement Type - 641), and another from stock in transit to receiving plant (Movement Type - 101).
And it will update PO History in both the cases.
You can config. this in SPRO > MM > Purchasing > Purchase Order > Setup Stock Transport order > Assign Document Type, One-Step Procedure, Underdelivery Tolerance > here activate "One-step" indicator if you want 1-step otherwise keep blank for 2-step.

Planned order conversion to Process Order and Stock Transport Order

Hello Friends,
Help me to setup the below scenario
We have an requirement wherein MAT1 can be inhouse produced or can also get stock from other plant via stock transport order.
For which in Material master I have configured
MRP 2 view
Procuremrent Type - X
Special Procurement - 40 (wherin the splly plant is maintained)
MRP 3 view
Strategy group - 40 (as it is planning with final assembly)
But when i run MRP system created Planed orders for PIRs. Selecting Planned Order conversion only Purchase req tab is available we do not have an option to convert to production order.
Kindly help me correcting the settings, so that i should be in a position to convert planned order either to process order or Stock transport Purchase requisition.
Thanks and Regards,
Chandra

Hi Chandra,
Stock transfer is only possible with procurement type 'F'. when you take spl.procurement type 40, its a combination of F(procurement type) and U (Spl.procurement). it will over write the procurement type ('X' in your case) in material master. that is the reason u r getting only pur req.
if you know the proportion quantity i.e how much inhouse and how much stock transport, then use quota arrangement.
or
don't use any spl procurement key. define the materials in both the plants. when converting planned order to pur req. manually assign supplying plant and item category 'U'. try this.
Thanks & regards
Dilip

Multiple stock transport orders in single inv

hi all,
Pl.tell me how to make Multiple stock transport orders in single inv.
For Ex: We have create 2 Sto's in differnt dates, while going VL10B in Outbound delivery it is splitiing in two invoices.
Pl.can any body explain how to control the Multiple invoices.
kaushik

Hi Kaushik
Internal customer should be assaigned to the ordering plant ( MM -> Purchasing -> Purchase Order -> Setup stock transport order -> assign the internal customer to the ordering plant and assign the Sales area of the internal customer.
Assign its Sales area to the delivering plant
Assign the document type and Delivery type NB and NLCC
Assign the Supplying plant --> Receiving Plant --> NB
Take the delivering plant and assign the sales area.
Vendor master has to be created and assaign the supply source ( Delivering Plant).
Create a puchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assaign the purchase order number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
Billing (Intercompany pricing conditions should be set).
One more Process
STO CONFIG:
The following steps have to be followed in order to configure stock transport order between two plants.
1. Create a vendor for the Company code of the receiving plant using account group 0007
via T-Code XK01.
2. In the purchasing data view assign the supplying plant and the schema group
3. Create customer with the sales area of the vendor.
4. The shipping conditions, the delivering plant and the transportation zone determine the
route in the STO.
5. In the pricing procedure determination relevant to the STO assign document pricing
procedure and customer pricing procedure to get the pricing in the invoice.
6. Maintain condition records for pricing condition.
7. Maintain carrier as a partner in the customer master.
8. In OMGN select the supplying plant and assign the company code and sales area.
Similarly select the receiving plant and assign the company code and sales area (The
company code to which the plant is assigned to).
9. Assign the delivery type and checking rule to the document type.
10. And finally, assign the purchasing document type to the supplying plant and the
receiving plant.
11. Create the STO using T-Code ME 21N and save.
12. Check for release strategy if any and release using T-Code ME 28.
13. Create delivery in background using VL10G.
14. If delivery is created, it is an indication of correct configuration and master data
creation.
Stock transfer between two plants in deffernet company codes is known as inter company
stock transfer.
Material shoud be maintained in both supplying and receiving plant MM01
Sotck should maintain only in supplying plant MB1C
Create receving plant as a customer in suplying plants company code and sales area
XD01
Assign this customer number in receving plant detials OMGN
Assign supplying sales area in supplying plant details OMGN
Assign delivery tupe NB for in combination of supplying/ receving plants.
Create STO ME21N
As it is normal there in the item details wer should get shipping date i.e customer number
Go for Deliveryy VL10B
Shipping point *****
Select PO go for execute
then select the delivery then go for delvy ............create delvy,,,, delvy nubmer generated.
Goods Issue VL02
Delvy doc **********
Click on picking
enter the picking qty
Click on PGI
in the mean time check in the PO history you will get the details
Goods receipt MIGO
Stock overview the stock will be updated....
STO
Reward if useful to u

Commercial Invoice and Stock Transport Order

Hello Experts,
My client is using stock transport orders which sometimes results in cross border goods movement. I am not able to find any functionality for creating commercial invoices to be used for these types of shipping.
Any ideas?
rgds
GAR

Hi Gar,
Usually when there is a crossing of borders, it is a movement between 2 different companies code, therefore the intercompany purchase is the usual flow.
If you mean that the flow is between plants of the same company code between different countries, maybe you are talking about "Plants abroad" functionality.
http://help.sap.com/saphelp_45b/helpdata/en/34/60b1a0ae724effe10000009b38f91f/content.htm
Previously, the plants of a company code had to belong to the country of that company code.
As of Release 4.0A, it is possible to deviate from this rule for European company codes with European plants.
I never had to use this functionality at a customer site, but that sounds like your requirement
Also allows internal billing document for intrastat reporting, so feel free to evaluate!
Best Regards
Franck Lumpe
Freelance SAP Consultant

Minimum order qty for Stock transport orders

Hello
I wonder if there is any way to make the following fields from the Sales org 1 view in the material master to apply on Stock transport orders (ME21N, with subsequent delivery created in VL10B):
Minimum order qty
Minimum delivery qty
Delivery unit
As of now in our system, it only works for Sales orders and related deliveries. But not for Stock transport orders with a supplying plant.
Also, if there is any other way to implement minimum order qty funcitonality and delivery for Stock transport orders, pls advice.
Thanks,
OT

Hello
We are in an intracompany business case. The supplying and recieving plant are in the same company.
The situation is as follows: we are planning all replenishment manually without any involvement of MRP.
What we would like to achieve is the same functionality as of the minimum order/delivery quantities material master fields in the material master.
So when the planner creates the stock transfer order, he keys in supplying plant, material and quantity manually, then the warning message about the minimum order qty should appear.
So far I have not found any way to do this. Any ideas are greatfully received.
BR,
OT

Table to See Stock Transport Order Partners

Hi All.
What table can I see the partners defined in a Stock Transport Order?
I've realized that VBPA is just for sales order documents.
Thanks,
Jim

Hi,
Select the PO's from the EKKO table of DOCU type "UB" which is STO's
Then Select the parters from the EKPA table for the entries of the selected EKKO Po's
Reward Points if it is Useful.
Thanks,
Manjunath MS

Proforma Invoice (F8) for Stock Transport Order

With regard to intra-company STO, we have a specific requirement:
Referencing delivery document generated using Xn: VL10B (delivery from Stock Transport Order), we create proforma invoice type F8. Subsequently, excise invoice is created referencing the proforma invoice.We need to capture the material cost plus 10 % of material cost as PR00 value in the invoice.
Problem:
However, here comes the problem: condition type PR00 does not come automaticcally in the proforma invoice, though pricing procedure has PR00 condition type. We have to manually entere the PR00 condition type for every line item (a routine calculates 110% of the value once value is enetered in the manually entered condition)
Is it the standard system behaviour ? Any way out?
with kind regards
Muraleedharan.R

Hi,
Have you maintained the condition records for PR00 , if not than you have to enter it manually at the item level .
If your price is same for all the items than maintain use header condition or else at item level you have to enter PR00 item by item.
Regards,
Krishna O

Error occuring while creating a Delivery for Stock transport order

Hi,
I am getting error while creating the delivery for thr stock transport order.The error message is given below.
                                                                                Error Log for coll. run 0001248218
4       6000038321 000010 Only 0 ST of material F784100 available
     4       6000038321 000010 An item with no delivery quantity is not permitted. Item will be deleted.
     4       6000038321 000020 Only 0 ST of material F784100 available
     4       6000038321 000020 An item with no delivery quantity is not permitted. Item will be deleted.
     4       6000038321 000030 Only 0 ST of material F784100 available
     4       6000038321 000030 An item with no delivery quantity is not permitted. Item will be deleted.
The stocks are present in the plant.
Can anyone help me to solve this issue?
Thanks
Srinivasan

Hi,
Check in
SPRO--IMG-MM-IM and PI---stock determinationassign stock determination in applications---Inventory management
Check for 641 or 647,there is a SD rule assigned.
Regards,
Deepak.

Stock Transport Order Setup

Similar Messages

Maybe you are looking for