Stock Trasfer reqs are not seen in R3

Hi,
PReqRel (Category - BH) and ConRel (Category - BI) elements visible in R3 and not seen in R3. These are STReq between 2 plants.
- Publications are maintained on APO side.
- Integration models are activated.

Hi,
Please check your settings for Transfer to OLTP systems in APO SPRO, as suggested (this is for Preqs).
Also, create Preqs and POs in R/3 using transactions ME51 and ME21 respectively and see whether the same are reflected correctly in APO.
Are you trying to convert Preqs in POs using RRP7? If this is the case, check following settings:
1. Distribution definition in APO
2. Document type for STO in R/3
3. Accounting settings in material master.
Find out what you errors do you get in CCR in APO or CFG1 in R/3?
Regards,
Bipin

Similar Messages

Attachments and history of my emails are not seen by Windows users

attachments and history of my emails are not seen by Windows users

Just guessing at what you mean, try this:
In Mail, while composing a message, go to Mail's menu and click:
Edit > Attachments > Always send Windows-friendly attachments

In my iPad mini some apps are not seen (voice recorder, calculator, compass etc)

in my iPad mini some apps are not seen (voice recorder, calculator, compass etc)er

Those apps aren't included in iOS on iPads
iPad Mini built-in apps : http://www.apple.com/ipad-mini/built-in-apps/
iPad manual (which has a chapter on each of the built-in apps) : http://support.apple.com/manuals/ipad/

Colormunkie Photo printer profile (*.ICM and *.ICC ) are not seen by LR4.2 in the Print Job section

Colormunkie Photo printer profile (*.ICM and *.ICC ) are not seen by LR4.2 in the Print Job section
I used Colormunkie Photo to create an .ICM file for printer calibration. When that failed I tried changing the suffix to .ICC. Under neither circumstance did LR4.2 display the file in the menu to select printer profile. There were several display files with both suffixes but no printer files at all. I tried three times with no success and cannot think of what else to try. The first two were the same. I varied the file creation name suffix in the third. Help will be appreciated. My OS is Win 7 ultimate SP1 Printer is HP 2550L laserjet.

Tillman
Glad you found your answer, Colormunki is smart enough to figure out the color space for the printer as I found out - But for quality work the latest generation of inkjet printers from Epson and Canon are hard to beat, and compared to a laserjet the quality is like night and day. The other benefit of changing up to an inkjet printer is the choice of papers available which you could not put through a laserjet.
I had a colleague that tried printing on Photoglossy paper through his color laser and it fried the fuser, and HP, while they replaced the fuser unit under warranty, made it very clear that that was a daft thing to do.
So if I were in your position I would go with an inkjet and you will then enjoy the benefits of better quality output, better paper choices and with your Colormunki be able to make custom profiles that will work in LR
Cheers
Mike

How do i set colors on javascript coding page, colors are not seen after installing Firefox version 8

How do i set colors on javascript coding page, colors are not seen after installing Firefox version 8 . I am using WaveMaker application for web development

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

TS2512 i m trying to convert dpx files to mov in colour 1.5.3 but in file browser files are not seen in proper order for ex files names are 12345 it is coming as 23145 bcoz of which in output also its coming in wrong order

i m trying to convert dpx files to mov in colour 1.5.3 but in file browser files are not seen in proper order for ex files names are 12345 it is coming as 23145 bcoz of which in output also its coming in wrong order

1) What you downloaded should be a packed file (zip, tar.gz, etc) that needs to be unpacked into the directory of your choice.
2) & 3) are answered by Ant's installation documentation (the page you're quoting from):
http://ant.apache.org/manual/index.html

I have an iPhone, an iPad, 2 iPad mini's and 2 iPod Touch's that all share the same apple id. I want to separate the iPhone so that texts are not seen on the other devices but I still want them to have the iMessage ability. How do I do that?

I have an iPhone, an iPad, 2 iPad mini's and 2 iPod Touch's that all share the same apple id. I want to separate the iPhone so that texts are not seen on the other devices but I still want them to have the iMessage ability. How do I do that?

Not sure if you can have 2 Apple ids contact Apple.com/I'd You may to set IPhone up as new with a different Apple ID & password. Bsydd uk

Contacts created with Lotus notes are not seen in Exchange 2007 SP3 Rollup 7.

Contacts created with Lotus notes are not seen in Microsoft Exchange 2007 SP3 Rollup 7. the same is seen in Microsoft Exchange 2010 without issues.
when we create a new contact on Microsoft Exchange 2007, the contacts gets created but it is not seen unless we filter the EMC to list the contacts. Microsoft Exchange 2010 does not have any issues.
any help or inputs will be appreciated.
Thanks,
Sid

You shouldn't be using the 2007 EMC or cmdlets to create new objects if you have a more recent release installed in your organization. Use the 2010 software.
If you create the mail-enabled contact with the 2010 EMC or cmdlets do you see it in the 2007 EMC?
When you say the contact "is not seen unless we filter the EMC to list the contacts", does that mean you don't see the contact when you're looking at the "Recipient configuration" container? Is there a default filter on that container? Do you have a limit
on the number of objects shown?
As for the objects created by 3rd-party software (Lotus), are they creating the contacts correctly?
--- Rich Matheisen MCSE&I, Exchange MVP

Stock transfer PRs are not getting created in APO

Hi,
I have a plant-to-plant transfer is configured using special procurement type. When APO creates stock.PRs , it does not provide any numbers to PRs and they are not getting trasnfered to R3. CIF model for PIR & POs are running good.
In CIF post processing these PRs as stuck and I see " Vendor master data does not exist for plant A" . There is vendor master data created for plant A in R3 and material info record also exists.
How to de-bug this post processing queue to see what is missing in vendor master data?
regards,
shan

Hi
Can you explain in detail your scenario..you say plant A so I suppose there is plant named B in your scenario. which one is the source location and which one destination location?
In Stock transfer from plant to plant scenario, key is to have correct settings for the system to do source determination.
Assuming plant A as destination and plant B as source. First, The material should be maintained at both the plants.
You need to have a purchasing info record(ME11) linking your material and the source plant B.
I assume you are using external procurement type in your material master. Special procurement type 40 (stock transfer)should be maintained in material master.
Then the system creates a STReq and PurReq using the source plant B. For the system to do this source determination should happen. To verify that..you can check the following...
When you transfer the purchasing info record, system automatically generates the external procurement relationships with source location as plant B, destination location as plant A and info record reference.
When you transfer material master data, the system auto'lly generates transportation lanes between plant A and plant B. (keep in mind transportation lanes should be manually created here)
So in essence you have to check if all the above things are done by the system.
Hope Im clear in this
regards
Mohan V R Chunchu

BB Passport: After upgrading to 10.3.1, the USB key are not seen by the OS

Blackberry Passport:
After upgrading to 10.3.1 Any kind of USB key is not seen by the OS, even after restarting the operating system.
With original OS 10.3 could connect USB key to transfer my photos with file manager.
Any suggestions?

There a lot of issues being discovered by users doing the upgrade OTA or using Link. And they are varied. It's had to say whether your problem another of these issues or something else. Those I trust are recommending a clean OS install using an autoloader as so far there are not the same problems afterward.
You could try the autoloader route. Do a backup first. After the clean OS install, test before you do a restore and install app. If problem is gone, then you know the clean OS works. The next question will be if the problem returns when you restore or add apps.
- Ira

Organizations are not seen from Application R12

Hi,
I have installed R12.1 Fresh Database in my laptop and its running fine. I created Location, Organization and Organization classification using HRMS super user responsibility. When I opened the organizations window the organization that I created is not seen but they are stored in database. Is there any setup that I am missing?
Thanks in advance.

Hi,
To access UK SHRMS Manager I changed the profile value for UK SHRMS Managers responsibiity. I choose "HR User" value at Responsibilty level for "HR User Type" Profile.
Then I created location.
UK SHRMS Manager>Work Structures>Location
Then I created Organization
UK SHRMS Manager>Work Structures>Organization>Description
I classified this organization as Business Group.
I closed all the windows. When I tried to query the organization that I created, only the default Business Group (Setup Business Group) is seen. But I can see all the organizations that I created in the database.
I hope this will give you some idea to fix my problem.
Thanks in advance

Info area not seen in the "open query"window

Hi all
For some reason my Info area is not seen in the "open query"window, in the BEx Anal. can some tell me how to fix this.
Thanks
kavi

Hi kavi
I am not sure
Is it Business content infoarea, for me also business content infoarea is not seen, but in "open query" window if u select the icon for create new query,there it will ask for the cuben here u click binaculor icon for search and type ur infocube technical name there u can get ur cube.
Hoope it is helpfull........Let me know
Regards
NR
Assign points if it is helpfull

CRM 7.0 WEB IC - context node values are not seen in webIC

Hi
can anyone help me in resolving my problem in CRM WEB IC.
Actually i have added a new context node Using wizard , by right clicking the context nodes. i have four custom fields in that node, these i have to show on the View Account overview and the context node for this is Account where i have to fetch data based on the BP_number i have in Account, i have to display custom fields from the context node BALANce which i have created .
I gave all my coding in do_prepare_output method. But the values are not passing to my custom fields as a result the view in WEB IC dissappears saying
&NBSP;
Cannot display view IUICOVW/AccInfo of UI Component IUICOVW
An exception has occurred Exception Class CX_SY_REF_IS_INITIAL - Dereferencing of the NULL reference
Method: ZL_IUICOVW_ACCINFO_IMPL=>DO_PREPARE_OUTPUT
Source Text Row: 82
Edited by: nelachinni on Dec 16, 2010 10:04 PM

Hi,
Could you please share what are you trying to access at line 82 in do_prepare_output ? sharing code snippet might help in understanding the issue.
Cheers,
Sumit Mittal

Comm Channels are not seen in the Communication Channel Monitoring in RWB

Hello All,
I am facing a strange Problem. In the RWB i am not able to see the Comm Channels that i have configured in the Integration Directory. In the Adapter Monitoring also I am not able to see the Adapters with Green Status.
I am on PI 7.0 and SP9. For a simple IDOC to File Scenario, the IDOC is getting sent but the File is not getting written. I have to monitor it for this. As the Comm Channels are not showing so I am not able to Montitor.
Can anyone please suggest me how to do this montoring and how can I see the Comm Channels that I have created.
Thanks in Anticipation
Best Regards
Chakra and Somnath

Hi,
1. Check created the Busieness system to identify your XI System.
Role of Business system : Integration Server
Pipleline : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
2. In XI Tcode : SXMB_ADM
Role of Business system : Integration Server
Pipleline : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
3. Go to SXMB_ADM
Execute Integration Engine and Configuration
Click on Check button check the SLD working fine or not.
Regards,
Venu.

Enabled users are not seen in the rtc database

Hi,
I have installed Lync 2013 into our environment and I am having an issue where users enabled for Lync are not able to log into the client, receiving the error:
"You didn't get signed in. It might be your sign-in address or logon credentials, so try those again. If that doesn't work, contact your support team."
We have an EE FE pool and all the AD prep and server install sections completed successfully.
When a user is enabled via the Control Panel or using Enable-CsUser, all the relevant attributes within AD are populated and visible in AD and the Get-CsUser command. However, running dbanalyze with /report:user returns the following error:
###50010:ReportUserData: [email protected] is not found in this database.
Also, running dbanalyze with /report:diag returns:
No contacts found in the database.
I have checked SQL profiler and can see similar issues to this post -
http://jamesosw.wordpress.com/2013/08/04/cant-sign-in-to-lync/ with the same errors in SQL Profiler and OCS Logger Tool, but we only have one domain, so this fix doesn't work and isn't relevant anyway.
Is there anyone who could shine a light on this problem?
Thanks,
James

Run
Update-CsUserDatabase and after 5 minutes Can we get the output of Get-csuserpoolinfo -identity "domain\username"
Please remember, if you see a post that helped you please click ;Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph

Stock Trasfer reqs are not seen in R3

Similar Messages

Maybe you are looking for