Stock type field editable in Cancellation document in 106 mvt

Dear Experts,
We are doing MIGO by 103, 105 movement. User requirement is After completing 105movement, when user cancels the 105 document by using 106 movement, user requirement is stock type field should be editable. User will select field from unrestricted, quality field or blocked stock. Because when we do 103 movement stock goes to GR blocked stock, then 105 against GR blocked stock goes to quality. Quality clears this material & material comes to Unrestricted. Now when we try to reverse 105 document system automatically takes stock type as quality inspection & goods are at unrestricted.
Could any body guide?
Thanks
Trupti

Hi,
MIGO - Goods Receipt - PO - Mov type 106.
Here select the 105 document you want to reverse and choose "Stock Type" as you want (unrestricted / Quality / etc) system will allow you to choose stck type.
But in cancellation MIGO doc system will not allow you to change Stock ype.
Regards,
Rakesh

Similar Messages

  • PTP - Change to stock type field status configuration in Purchase Order

    When creating or changing a PO for direct material - or even during goods receipt, the stock type field which by default is "X - Quality Inspection" can be changed to "Unrestricted Use" by the purchasing personnel.  This is not in line with QA requirements where the change from QI to Unrestricted use can only be done by QA personnel.
    Need to configure the system not to allow purchasing personnel to change the status.
    Please tell me  where i need to configure the above requirement.
    Regards
    Sreekanth

    HI,
    You will need to change screen layout at document level in ME21N and ME22N. Follow below steps
    SPRO -> Mateial Management -> Purchasing -> Purchase Order -> Define Screen Layout at Document levle -> ME21N -> Look for Quality Inspection (I believe this is the field, I did not test it) and make it Display only. By default it comes as Optional entry.
    Regards,

  • How to disable 'Stock type' field in MIGO depending doc. type or mvt. type

    Does anybody knows how to deactivate (just display but not modify) field 'Stock field' in MIGO transaction if we just want to do that for an specific document type (UB)? If it's not possible, does anybody know how to do that but by movement type (351/101)?
    Now stock type can be changed from unrestricted (set by default) to blocked or under quarantine when we post GI or GR related to a STO (351/101) and we want to avoid users changing this field.
    Thanks in advance,
    Raquel

    USE t Code OMJX,  and set the Stock type to DISPLAY ONLY, but that'd be for all Mov.t types. The PO document type would not matter here!! You could use a USER EXIT upon SAVE to revert to what ever you need irrespective of user changes other wise.. Thats an option!! Talk to your ABAP' er
    Edited by: Pavan Kumar on Jul 18, 2008 12:32 AM

  • Stock Type Field on Outbound Delivery Screen

    Hi,
    In transacrion VL02N At line item level on Administration tab there is this field called Stock Type (LIPS-INSMK). Does anyone know what is the purpose of field. How and when this field is populated in case of outbound delivery?
    Regards,
    Pawan.

    Jürgen L. wrote:
    LIPS table is not only used for outbound deliveries, it stores as well inbound deliveries.Deliveries are used as well to communicate with decentralized warehouses or instead of transport order in the warehouse.
    >
    > outbound deliveries can only be made from unrestricted use stock
    Hi Jurgen,
    Thanks for your reply.
    In other words this field is NOT used in case of outbound delivery?
    Regards,
    Pawan.

  • Make a field editable in Billing document

    I have a billing document. If i click 'Selection list' a screen will get displayed displaying the open quantity and some other fields. I want to make the open quantity field as editable. How ?

    Hi,
    If you are using the standard billing document then we need to check with the exit.
    If your are using a report then using ALV we can make a field as editable.
    Or we can use the keyword "FORMAT INPUT ON".
    Please elaborate your query.
    Reward if helpful.
    Best Wishes,
    Chandralekha

  • Cannot change Transaction Type (COBL-RMVCT) for posted documents. (FB02)

    Hi guys,
    I'm encountering some problems with Document Change Rules. I already configured in SPRO the line item change rules for Transaction Type (COBL-RMVCT).  I already set it to "Field can be changed" but the system still does not allow changes. I also set it for all account types and company code, but still no luck. I hope somebody can assist me since we require that the transaction type be editable for posted documents. Thanks!

    Hi
    I am not sure about the reason for why the "changing" is not working.
    However, thought I should give my experience and opinion on this.
    I have not seen a system that allows "Transaction type" to be changed. If allowed, in my opinon it is similar to allowing the cost assignment field such as cost centre, profit centre or an order being allowed to changed. Thus should not be changed once posted. Further is these are allowed to be changed the imact to the prevous reported data will have to be estimated. E.g. if the transaction types are used for consolidation what is the impact of changing previous month data.

  • Reference Key 3 field editable in FB02

    Hi Friends.
    We have a requirement to make Reference Key 3 (BSEG-XREF3) field editable in FB02 (Document change).
    Kindly suggest how we can achieve this.
    Regards
    Srini

    Hi Srinivas,
    The conditions are as follows. You may change the field if
    1 - The posting period is still open
    2 - The line item is not yet cleared (for accounts with open item management)
    3 - The document involves either a debit posting to a customer account or a credit posting to a vendor account
    4 - The document is not an invoice-related credit memo
    5 - The document is not a credit memo from a down payment
    Regards,
    Viswa

  • Transfer Posting problem with "sales order stock type" status

    Hello, i have this problem, i spend 2 days looking in the forum, but
    nothing, the question is:
    The SD users sell an item, and the item get the status of "sales order
    stock type" in the MMBE, but at the same time, the MM user made a
    trasfer posting in two steps, he take out material with transaction
    MIGO, mvt 351, to another plant, but the materail was already
    compromised with SD; now he cant sell the items, because he dont
    realize that the material was in sales order stock type, and he already
    transfer it to another plant. how can i block this? if a material in
    MMBE is with "sales order stock type" status, he CANT transfer it with
    351 mvt type, what config i have to make?  thanks a lot!!!!
    now the quantity of the unrestict use
    stock is lower than the sales order, we dont want to have this issue,
    thanks again
    Edited by: Alex Arti on Aug 6, 2008 7:14 PM
    Edited by: Alex Arti on Aug 6, 2008 7:16 PM

    Hi!
    Have you recently upgraded to EHP4? In this case, please, check the note 1441195. This note should solve the issue that you are reporting.
    I hope this helps,
    Esther.

  • Field editable in FB02 for only one document type and user

    Hi:
    I have a question about editing a field and I hope you can help me. I need to make a field editable in FB02, but only for one document type and two users. The field is BSEG-ZFBDT, Baseline payment dte.
    I have tried in ‘Document Change Rules’, make this field editable when line item not cleared, but it works for all document types and users.
    Please, any idea?
    Thanks in advance for your time.
    Best regards.

    Hi,
    You have to write a ABAP code to achieve this.
    Validation is another Option where you can mention that value is allowed in the Baseline Date field only if the User and Document type value satisfies.
    BR
    Amitash

  • Order type field for PO/Document type field for PR

    Hi Everybody
    a) In Purchase Order creation screen (ME21)-for order type field -NB(standard order) is coming as default-How to make it blank(since we are using plantwise PO NOs)
    b)In purchase requisition screation screen(ME51)also Document type-NB(standard order) is coming as default-How to make it blank(since we are using plantwise Purchase requisitions)
    Thanks in advance
    Joseph David

    Simple,In order of ME21/ME51,Press F4,Select Required order/requistion type,Add it to Favourite list
    or else
    Create a transaction variant for ME21 & ME51 using t.code SDH0.
    Transaction Variant - A Step by Step Guide for Creation,Check below link,
    http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation
    Edited by: Jeyakanthan A on Apr 2, 2010 5:42 PM

  • PR(ME52N) field change for one document type

    Hi all,
    I have a requirement to have quanity field in display mode in ME52n (PR change) for only one document type say NB. for other document type the quantity field should be change mode. is this possible..if so cna you please explain in detail.
    Thanks,
    vatchan

    Hey vatchan,
    Here should be slight change to the earlie posted version.
    1. Materials Management - > Purchasing -> Purchase Requisition -> Define Screen Layout at Document Level
    2. select the Screen layout ME52N & copy this to new 'Felid selection group' (Say ZZZZ) and check Quantity field to be 'display' check box. (It is usually not advisable to make changes to standard 'Felid selection group')
    3. Then, Materials Management - > Purchasing -> Purchase Requisition -> Define Document Types
    4. define the screen layout in Field Selection Key created (ZZZZ) against the document type 'NB' and your ME52N should restrict 'quantity' field as 'Display' while other document types can still show 'Quantity' field as editable.
    Regards,
    Kik.

  • Make material as a mandatory field for a particular document type in PR

    Hi,
        Currently we are in SAP 4.6c version. There is a business requirement for making material as a mandatory field for a particular document type of purchase requisition as they don't want the user to raise non material purchase requisition using that document type. The field for material is currently not available in the configuration for Define Screen Layout at Document Level for purchase requisition.
    So could you kindly let me know the possible options to prevent user from raising a non material purchase requisition using that document type. If not could you kindly suggest me the user exits available at the time of saving purchase requisition which i could use so that we can write a code to check if the material number is entered or not. If not entered prevent the user from saving the purchase requisitions.
    Also it would be helpful if you could let me know how the fields for enjoy transaction (like material,document type) can be made available for selection in the configuration for Defile Screen Layout at Document Level for purchase requisition.
    All you help in the solving the above problem is highly appreciated.
    Thanks & Regards
    Ram

    Hi,
    Check below method works out for you, if you do not want to proceed with any ABAP development.
    Have a custom field selection key with Material Description field as "Mandatory" and "Display" in Basic Data, Item selection group.
    Assign this to your PR document type which need material as mandatory. With this you are making user to enter material indirectly as mandatory & user will not have an option of entering text which avoids indirect / service procurement.
    "Material Group" option won't help as User can have default settings with some value and it updates even in display mode of field.
    Regards,
    Ram
    Edited by: Ramprashanna S on Jan 11, 2012 11:51 PM

  • Regd..Document Type field..

    Hi All,
    Can u plz explain the significanse of the field Document Type found on the details screen of billing docs (VOFA).
    Can u PLZ explain when and with what value should we fill theis field.
    I have gone thru the sap help but couldnot make out much.
    Points Assured.
    Best Regards,
    Subbz..

    hi
    the document type is related to Accounting document which you assign the accounting document type to billing document,
    there are different accounting documents for different billing documents, for example RV is used for posting of invoices and like wise there are different documents are used
    your role in assigning in the billing documents is nothing
    the accounting documents are assigned at account key level which is done by FI consultant
    you need not worry about this field
    regards
    srini

  • Change field Stock Type in transaction MIGO

    HI Gurus
    My user wants to change the field Stock Type in good receipt after that good receipt has been created .
    Is there a way to change this field ? Using transaction  MIGO  can only display the good receipt .
    Thanks in advance

    Once GR has been done you can not change the stock type in display.
    Using MIGO at the time of goods receipt you can change the stock Type. Once you have posted to a wrong stock type then you need to do the transfer posting from stock type to stock type.
    Explain your requirment?
    Check [Stock types|http://help.sap.com/saphelp_46c/helpdata/en/a5/63393f43a211d189410000e829fbbd/content.htm]

  • Field Exit for Sales Document Type in VA01

    hi
       i want to do field exit for Sales Document Type in VA01.
    but i dont know to find the correct exit.
    pls tell the exit name and the steps to find it.
    thank u

    Hi,
    Goto this link u will get the information u required....
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9cd334f3-0a01-0010-d884-f56120039915
    Check the numerous threads that already exist in SDN :
    CMOD and SMOD
    http://www.sap-img.com/abap/what-is-user-exits.htm
    Regards,
    Manish

Maybe you are looking for

  • Open VI Reference Function won't execute in multi process application

    I have a sub vi with Reentrant execution, and it has recursive call on some cases. It is very similar to OpenG VI "Read Key (Variant)__ogtk.vi", my sub vi works without any problem unit LabVIEW's Two Button Dialog is opened in other process loop. I h

  • Query regarding G/LAccounts in psoting

    Hi Experts, I have one query regarding PCP0. After executing PCP0,If We double click on the posting document we can see the number of G/L accounts in that posting Document.If we double click on each G/L Account it shows all the revision information i

  • Prime Infrastructure v1.3 -- Boot fails, displays debug info

    Prime website stopped responding so I logged onto the console (VM) and it had these debug errors on it. I rebooted and received same thing. This happened on a previous install as well. However, I can SSH to the appliance, but the website doesn't load

  • Make my directory as FTP

    Hi,               My scenario is File to File. The sender communication channel has to pick the file from my local desk top. I configured sender communication channel as a FTP. Now how can I make my local desk top as a FTP folder

  • Family photo/video album with comments

    I am organizing all my families photos/videos. I have 9 brothers/sisters, so you can imagine a lot of family events, many which I will not know much about. I was wondering the best way for me to put these on mobileme/iweb/iphoto which will allow for