Stock Type Field on Outbound Delivery Screen

Hi,
In transacrion VL02N At line item level on Administration tab there is this field called Stock Type (LIPS-INSMK). Does anyone know what is the purpose of field. How and when this field is populated in case of outbound delivery?
Regards,
Pawan.

Jürgen L. wrote:
LIPS table is not only used for outbound deliveries, it stores as well inbound deliveries.Deliveries are used as well to communicate with decentralized warehouses or instead of transport order in the warehouse.
>
> outbound deliveries can only be made from unrestricted use stock
Hi Jurgen,
Thanks for your reply.
In other words this field is NOT used in case of outbound delivery?
Regards,
Pawan.

Similar Messages

  • How to add Total Quantity in Inbound and Outbound Delivery screen

    Hi,
    I want to add Total quantity field in Inbound and Outbound Delivery screens.
    In document flow i can see the line item quantities in ALV Format, but if i select Display the totals above the entry check box
    in Change Layout--> Display, i didn't see any totals displayed.
    Please help me on this?
    Regards
    Bhuvana

    Hi
    If the field is a customer field, see BADI 'LE_SHP_TAB_CUST_HEAD'
    Regards
    Eduardo

  • PTP - Change to stock type field status configuration in Purchase Order

    When creating or changing a PO for direct material - or even during goods receipt, the stock type field which by default is "X - Quality Inspection" can be changed to "Unrestricted Use" by the purchasing personnel.  This is not in line with QA requirements where the change from QI to Unrestricted use can only be done by QA personnel.
    Need to configure the system not to allow purchasing personnel to change the status.
    Please tell me  where i need to configure the above requirement.
    Regards
    Sreekanth

    HI,
    You will need to change screen layout at document level in ME21N and ME22N. Follow below steps
    SPRO -> Mateial Management -> Purchasing -> Purchase Order -> Define Screen Layout at Document levle -> ME21N -> Look for Quality Inspection (I believe this is the field, I did not test it) and make it Display only. By default it comes as Optional entry.
    Regards,

  • How Goods Issu happens in the Stock transfer process with outbound delivery

    Hi,
    Can you please explain me how the goods issue happens in the Stock transfer scenario with outbound delivery?
    can we use VL02n for goods issue for single delivery doc(Delivery type-RL).
    Can we use the transaction VL23 for collective processing of goods issue for stock transfers.
    Thanks

    Hi Anil,
    ->You can use VL02N transaction to do PGI for the outbound delivery in the Stock transfer scenario.
    -->But you have mentioned that delivery type is RL -is this returns delivery
    Normally NL delivery will be used in STO(Rplenishment
    delivery)
    -->You can use VL06G transaction for collective PGI
        The transaction VL23 for delivery schdule in the back ground
    I hope it will help you,
    Regards,
    Murali.

  • Stock type field editable in Cancellation document in 106 mvt

    Dear Experts,
    We are doing MIGO by 103, 105 movement. User requirement is After completing 105movement, when user cancels the 105 document by using 106 movement, user requirement is stock type field should be editable. User will select field from unrestricted, quality field or blocked stock. Because when we do 103 movement stock goes to GR blocked stock, then 105 against GR blocked stock goes to quality. Quality clears this material & material comes to Unrestricted. Now when we try to reverse 105 document system automatically takes stock type as quality inspection & goods are at unrestricted.
    Could any body guide?
    Thanks
    Trupti

    Hi,
    MIGO - Goods Receipt - PO - Mov type 106.
    Here select the 105 document you want to reverse and choose "Stock Type" as you want (unrestricted / Quality / etc) system will allow you to choose stck type.
    But in cancellation MIGO doc system will not allow you to change Stock ype.
    Regards,
    Rakesh

  • Cost center field in outbound delivery item level.

    I want to make Outbound Delivery without Sales order referance - VL01NO
    In Outbound Delivery, Goto > Item > Financial Processing, there is Cost center field.
    AS a CO user's requirements, I have to input this field.
    But I can not put in there, because it is not active - just display ; screened.
    I want to use this cost center field.
    How can I do it?
    Regards.

    Hi
    The Cost Center Determination settings is in OVF3 -  but there are some cases where the Cost Center must be exceptionally changed. 
    If the document category for order type in IMG VOV8 is defined to be "I" which belong to order type FD - Deliv.Free of Charge, then the field cost center is active for input during transaction VA01. 
    Alternatively, you can specify an order reason and assign a cost center to an order reason. 
    However the standard SAP works only at the header level though, so it would not work if cost center is needed on the line item. 
    The cost center are assign for such business transactions as :
    - Free deliveries
    - Returns
    - Deliveries of advertising materials
    You can also make cost center allocation dependent on the order reason, for example:
    Order reason: Damage in transit
    Order reason: Free sample
    Both the IMG settings are done in transaction OVF3, either with/without the order reason.
    Regds
    MM

  • Open Qty Field in Outbound Delivery

    Hi All,
    I would appreciate any assistance that you could offer on this issue.
    It is concerning the little known 'Open Qty' field in the outbound delivery.
    The business process here is to create outbound deliveries, which are then continually added to as and when stock becomes available.
    The Open Qty field should display the open qty from the sales order line, which includes the qty just delivered.
    So for example, a user attempts to add several lines to an existing outbound delivery (ie outbound delivery > deliver sales order).
    The user would then compare the qty delivered against the Open Qty - if they match then ok.  If the qty delivered is less than the open qty, then the user would delete this line as they are only interested in delivering the full qty.
    However the 'Open Qty' is not working as expected.  Eg if open qty on sales order is 2000.  But qty delivered is only 1500, the open qty would = 1500.  This is incorrect.  After the user saves the deliver and then re-checks he would see qty delivered = 1500 and Open Qty = 2000, so then he would know that the full qty was not delivered.
    This business has just migrated from 4.6c (where this field behaved correctly) to ECC 6.0.
    Thanks for any advice.
    Regards
    Guy

    Delivery qty - LIPS-LFIMG.
    You cannot get open quantity directly.
    use this way.
    Delivery qty   - LIPS-LFIMG.
    order qty       - VBAP-KWMENG.
    open qty = delivery qty - order qty.

  • Text from Stock Transfer Order to Outbound delivery

    Hi guys
    We wish to enter line item test in a Stock transfer order UB and transfer it to an Outbound delivery type NL.
    The required text are 'ITEM TEXT' and 'DELIVERY TEXT'.
    Please advise on the appropriate configuration that is required to achieve this.
    Thanks, Felix

    Hi Felix,
    Please go to transaction VOTXN ,
    Please follow Note 751441.
    Revert back for any queries.
    Thanks,
    AMOD

  • Need IDOC type to create outbound Delivery in SAP

    Hello,
    I am looking for the IDOC basic type, message type and process code which will be able to create an outbound Delivery in SAP.   
    Scenario:
    Inbound data needs to be integrated into SAP to create an outbound delivery with reference to a Sales Order.
    Thanks
    Satie

    Satie,
    To confirm, you want the Delivery create triggered as a result of a file received from your Customer ? Is it purely a trigger, or will there be other information included in the file that might be included on the SAP Delivery ? If it's purely a trigger, I think I'd probably look into blocking the Sales Order in some fashion (e.g. Header Delivery Block), and using the trigger to release the Sales Order, i.e. ORDCHG. You could probably write additional data, such as Delivery Instructions, at the same time. If however, you need the inbound file to directly create the Delivery, I suspect you will need to create a custom iDoc / Function Module to call a BAPI to create the Delivery with reference to the Sales Order.
    Cheers, Paul.

  • How to disable 'Stock type' field in MIGO depending doc. type or mvt. type

    Does anybody knows how to deactivate (just display but not modify) field 'Stock field' in MIGO transaction if we just want to do that for an specific document type (UB)? If it's not possible, does anybody know how to do that but by movement type (351/101)?
    Now stock type can be changed from unrestricted (set by default) to blocked or under quarantine when we post GI or GR related to a STO (351/101) and we want to avoid users changing this field.
    Thanks in advance,
    Raquel

    USE t Code OMJX,  and set the Stock type to DISPLAY ONLY, but that'd be for all Mov.t types. The PO document type would not matter here!! You could use a USER EXIT upon SAVE to revert to what ever you need irrespective of user changes other wise.. Thats an option!! Talk to your ABAP' er
    Edited by: Pavan Kumar on Jul 18, 2008 12:32 AM

  • How to populate custom fields for Outbound delivery header (LIKP)

    Hi All,
    I have added one field in the structure LIKP using APPEND structure. Now want to populate this field from a batch program. I have delivery number. Is there any API or BAPI. I already tried using the FM BAPI_OUTB_DELIVERY_CHANGE by populating the extension. Is there any another area (EXIT or BADI) where I need to change.
    Thanks in advance
    Subhankar

    Hi Keshav,
    No . Nothing was happend.
    l_wa_header_data-deliv_numb = '8600007138' .
    l_wa_header_control-deliv_numb = '8600007138'.
    l_wa_extension1 = 'X'.
    append l_wa_extension1 to i_extn1.
    l_delivery = '8600007138'.
    call function 'BAPI_OUTB_DELIVERY_CHANGE'
      exporting
        header_data    = l_wa_header_data
        header_control = l_wa_header_control
        delivery       = l_delivery
      tables
        extension1     = i_extn1
        return         = l_i_return1.
    After processing l_i_return1 is coming as blank.
    Thanks
    Subhankar

  • Req: Save Valuation Type in PO when Outbounde delivery is created and Saved

    Hi Gurus,
    I have a requirement.
    1) PO is created
    2) Outbound Delivery is created with ref to PO and saved . The VALUATION TYPE entered in outbound delivery needs to be updated in the PO.
    please guide me in which user exit in Outbound Delivery can I update a PO valuation type.
    and also how can i change it whether through a BAPI or Direct table change.
    Avi.

    Hi,
    I have resolved this issue, I'm posting here so that it could be useful to someone.
    To trigger output from Inbound delivery, I have setup a new output and also developed a process code XXXX. A new FM is developed for this process code.
    In the new/ customized FM, I have called the standard FM 'IDOC_OUTPUT_ORDERS' which is used to pull PO data for ME10 process code.
    It is know that we have to pass PO number as object-key to the FM to pull the PO data but when a output is triggered from inbound delivery object-key will be a delivery number.
    Write a simple select statement which will get the PO number from EKES and set this as object key and pass it to FM  'IDOC_OUTPUT_ORDERS' .
    Thus, you can generate an outbound IDOC which has PO data when triggered from E1 application (Inbound Delivery).
    Thanks,
    Santo
    Edited by: santo29 on Jan 13, 2011 9:44 PM

  • LIPS-HANDLE How use is it in Outbound Delivery order?

    Hi, everyone.
    Could you advise for me.
    I want to modify the Item of Outbound delivery order using enhancement spot "ES_SAPFV50D".
    If I can separate the item into several parts, I have a trouble how to set the data.
    I don't know how to set the data to LIPS-HANDLE.
    How is it used in Outbound Delivery Order?
    it seems GUID Key..
    Soma

    steps by step procedure to cancel outbound delivery :
    1. reversal of the checkpoint departure
    2. reversal of goods issue
    3.reversal of load end
    4. use /n/scwm/adhu , go to advanced search , upload HU . unload the truck using the warehouse process type 3065 ( check the standard codes )
    5. reverse load begin
    6. delete the outbound delivery in TU screen
    7. cancel picking and packing activity by using /n/scwm/cancpick and release all the HU . this makes the stock free from the outbound delivery
    8.in /n/scwm/prdo screen , goto process code -> adjustment tab . and save
    9.click on "outbound delivery " tab in item overview section . this updates in ECC
    9 . check in the item tab ( in item overview section ) -> form view , whether the stock is zero or not
    10. check the queue
    11 .check the stock overview in the ecc by clicking vl03n -> goods movement - >... the status will be shown as "completed" and the quantity will be displayed as zero
    i hope , i hve made the steps clear but still any issues , plz tell me .

  • Goods receipt not possible for outbound delivery...error code 4

    hi ,
    i created a stock transfer order.
    an outbound delivery was created.
    pgi was done..
    gr was done against this delivery.
    but this gr was then cancelled.
    now when i am doing gr against this outbound delivery.
    i get this eror message.
    Goods receipt not possible for delivery 1134930096: error code 4
    i have then reversed PGI of this delivery in vl09.
    then did PGI again.
    but still same error message.
    please help.
    regards
    shashank

    Hi,
    When system gave you the message with the error code 4, you can click on the message.
    There may be various reasons for the error of GRn agaist delivery -
    1) GRN already posted against the Delivery
    2) Delivery is deleted
    3) Delivery is currently processed by another user
    System gives you the detailed analysis aling with the codes. You can check what reason is mentioned for reason code 4.
    Regards,
    Prashant

  • IDOC to create from outbound delivery from sales order as INBOUND process

    Hi Experts,
    We have third party interface for sales processing. Sales order, Outbound delivery and PGI will be done in Third party software and XML files will be send to SAP.
    We have to process this XML file into SAP with IDOC.
    Sales order processing is done but i am not able to find correct IDOC type for creating outbound delivery.
    Can you suggest Basic IDOC type / Message type and process code for the same.
    Regards,
    Sahadev Abhyankar

    Good morning !
    In the transaction WE20 to create the customer EDI  KU with EM function.
    Output parameter: message type DESADV and basic IDOC DESADV01.
    I associate the IDoc message type to LAVA, you should link it to the XML file, that is not how.
    Please : Could you please explain how you linked the XML file to IDOCS to create sales order ?
    Sorry for my poor English
    A greeting.

Maybe you are looking for