Stock upload - Goods receipt date, FIFO

We are doing our initial stock upload using LSMW based on goods movements.
When posting a goods movement the posting date will be used for FIFO considerations.
That's fine when your system is operative, but during the initial stock upload the posting date will be the same for all movements, which is not what we want.
Is there a way to transfer a GR date from the legacy system?
(Opening the posting periods to any date in the past is not an option).
Any ideas?
Thanks
Andreas

If you had a GR on May 2nd of 1000 and another GR on Oct. 1st for 500  and your currect stock is 800, then you just know that the last GR date was Oct. 1st. But this is not the truth for all stock on hand. So FIFO cannot work. So the field has just information caracter.
SAP will capture such info at batch level. Different software, different concepts. so each batch can have its own last GR date, and you distinguish the stock by batches, and can use batch search strategy to find the oldest one.
Without batch managment, SAP has this information about last goods receipt at quant level in warehouse managment.  Do you use WM module?
(even then I have no standard solution to manipulate this field while doing the stock load)

Similar Messages

  • WM LT01 Source BIN# not FIFO on Good-Receipt-Date, instead on QUANT# ?

    Hello,
    Encounterd a strange FIFO logic when doing LT01, the PICKING sequence is based on QUANT# instead of the Good-Receipt-Date.
    Could anyone please help to advise how to fix the problem ?
    PS : YOu may have to give more detail advice as I am not very good in WM.
    I could provide details if required.
    Thank you.

    from http://help.sap.com/erp2005_ehp_03/helpdata/EN/c6/f845874afa11d182b90000e829fbfe/frameset.htm
    Strategy F: FIFO (First In, First Out)
    Use
    With this picking strategy the system proposes the oldest quant in the storage type as the quant that should be transferred.
    The system generally calculates the "age" (length of time in storage) of a quant on the basis of the goods receipt posting date from the Inventory Management (IM) application component. The system automatically sets the goods receipt date in the quant and in the transfer requirement for every goods receipt posting in IM. When the transfer order is created, this date is copied over to the quant record of the destination storage bin.
    You can accept the goods receipt date that the system sets or you can enter a different date. Regardless of whether the system proposes the goods receipt date or you enter a different date, the date is used to calculate the age of the quant. This date influences the sorting sequence for each material.
    Prerequisites
    When you define the storage type record to use this strategy, enter f in the Picking strategy field.

  • Mixing materials with different Goods Receipt date in the same Storage Unit

    Hello everybody,
    I´d like to know how  FIFO strategy would affect to this example:
    Adding boxes from one storage unit (pallet) to another storage unit (pallet). Both storage units have different goods receipt dates, so there is a pallet which has boxes with different GR dates.
    Would FIFO make difference among boxes inside the storage unit?. As far as I know, when adding stock (boxes) to a handling unit (pallet), the system keeps the oldest GR date and does not create new quant number for the incoming boxes
    Thanks in advance for your help

    Hi Nagesh,
    Thank you for the input. I am receiving Stock from vendor and while creating Inbound delivery i created the Handling Unit and also packed it and i could also post it (PG Receipt). Now when i am creating TO i have that error message. The Storage Location where i am receiving is 9001and i have also maintained the partner Storage location,,, its like this Plant(1000)-SLoc(9001)-Partner SLoc(9002).... now the Storage Location 9002 is not HU managed,, the reason i gave this Storage location is, initially i gave 9001, but system said "Storage Location 9001 and 9001 must have different management systems". So now kindly tell me what is the purpose of the partner Storage location and which storage location should i give, as my partner Storage location across "1000-9001-????" thank you again for ur inputs.
    Regards,
    Samuel

  • Last Goods Issue Date & Last Goods Receipt Date

    Hi ,
    I would like to know in which table (and fields) I can find the "<b>Last Goods Issue Date</b> " & "<b>Last Goods Receipt Date</b>" based on Material Code, Plant and Storage location.I have to prepare a existing stock report for slow moving material.
    Thanks.

    Hi,
       Check table LIKP deliver header and LIPS deliver Item
    Regards,
    Prashant

  • Posting Goods Receipt Data in SRM

    Hi,
    We are implementing SRM 4(Extended Classic Scenario). For all open Purchase Orders (PO's) in R/3 we will be getting goods receipt data from R/3 in an excel sheet.
    Now how de we upload (create/post) the Goods Receipt data into SRM?
    Are there any BAPI's or function modules that I can use in the program that I am developing to create/post goods receipt in SRM from the data in the excel sheet?
    Thanks and Regards,
    Mick

    Thanks Christophe.
    I am not sure I have understood why we need to use BBP_CF_ASSIGNMENT. Is it that it will give the item quantities that have already been confirmed? And what is the balance quantity to be received? But if that is the case how does it help us as the excel sheet will contain the quantity for which the confirmation has to be created in SRM.
    Apart from the FM's that you mentioned (BBP_PD_CONF_CREATE, BBP_PD_CONF_UPDATE and BBP_PD_CONF_SAVE), I came across this bapi, BBP_BAPI_CONF_CREATE_IN. Will this not create the confirmations in SRM? Please let me know your thoughts.
    Regards,
    Mick

  • Goods Receipts data from ECC 6.0 to APO system

    Hello Team
    Good day to you. Now i have the below requirement.
    1. From legacy system i am getting Goods Receipt data and i want to create GRs in ECC system. for this i found a relavent bapi (ie  BAPI_GOODSMVT_CREATE). please correct me if i am wrong.
    2. As soon as GRs gets create in ECC system, i want to push this data to APO system for udpates. -- > so for this requirement i want to know is there any user-exit/badi exists in which i can write a code to trigger the RFC function module which takes data from ECC system and updates into APO system or is there any other way to perform this task. please suggest me on this.
    my Interface landscape is as below.
    Legacy system -
    > ECC system -
    > APO sytem
    i want to push GR data from legacy system to APO sytem as mentioned in the above two steps. so requesting you to please suggest the solution accordingly.
    Thanks in advance.
    REgards
    RAj

    Hi Mario
    Thank you very much for your detail explanation. But i think i have put a wrong question to you, i am so sorry for this. i am very new to this process. so i am putting my requirement and the options suggested below. so i request you to please check and suggest me accordingly. In Option 3 what is the BADI i need to use and what is the process to follow to complete my option 3 which is suggested. your suggestions will help me a lot.
    Thanks in advance very much.
    My requirement is below with the options suggested are given below.
    Design Decision and Options
    Description
    Describe the problem which requires a decision to be made.
    In the current design for Phase 1 go live, goods receipts from production will be generated through interfaces I608 (when production is receipted in PRISM) and I622 (when production is receipted via OPUS). This will update the stock levels in the ECC system. As the Core Interface (CIF) between ECC and APO will be active, the stocks will also be updated in APO.
    In APO, the production orders will not be reduced by the confirmed amounts until the PRISM to APO interface (I642) runs overnight. Until the production orders are reduced there will be double counting in APO leading to incorrect planning and GATP results.
    *Options(
    List the options that have been considered as potential solutions
    Option 1: Increase the frequency of the current PRISM to APO interface.
    Option 2: Build additional Interface between PRISM & APO for production confirmations.
    Option 3: Build enhancement to ECC GR to update APO production orders.
    Option 1: Increase the frequency of the current PRISM to APO interface
    Describe the pros and cons of option 1
    Pros
    No change to system design
    Cons
    Significant potential for issues with synchronous timing between Goods Receipts in the ECC system and Production Orders from PRISM to APO
    Interface method requires deletion/creation of production orders in APO which will cause issues for APO users
    Option 2: Build additional interface between PRISM and APO for production confirmations
    Describe the pros and cons of option 2
    Pros
    Interface method of updating production orders will not cause issues for APO users.
    Cons
    New interface
    Development work required in PRISM to feed new interface
    Significant potential for issues with synchronous timing between Goods Receipts in the ECC system and Production Orders from PRISM to APO
    Delay between GR from OPUS and production confirmation from PRISM to APO
    Option 3: Build enhancement to ECC GR to update APO production orders.
    Describe the pros and cons of option 3.  If only 2 options, then delete this section.  If more than 3 options, then add further sections.
    Pros
    Ties the APO production confirmation to the ECC goods receipt, mimicking phase 2 scenario
    Will not cause issues for APO users
    Removes timing issue between goods receipt and production order confirmation
    Cons
    New development.
    Assumptions for Proposed Development:
    Utilise available BADi upon posting of goods receipt
    Will generate qRFC that will run Production Confirmation BAPI in APO
    BADi executes in update task of goods receipt
    Interface for goods receipts will contain PRISM production order number
    Recommended Decision
    State which option is recommended as the decision, and the reason why this option has been recommended.
    Option 3:  Build enhancement to ECC GR to update production orders in APO.
    Regards
    Raj

  • Batch search strategy based on goods receipt date

    Hello,
    Can some one help me with setting up Batch search strategy based on goods receipt date currently is on batch number.
    Thanks a lot
    Thanks!
    Best Regards
    Srw

    Hi
    If you want to set up Batch search strategy based on goods receipt date......then you have to create GR Date as one charecteristics in T.Code: CT04 and assign this charecter in Class with respect to class type  023
    Then assign this class in Material Master Classification view..
    Make sure in Material master, Purchasing view...you have activated Batch management active check box....
    Then when ever you do GR in MIGO, In batch tab, In classification field maintain the GR Date..
    Then Create sort sequence in  T.Code: CU70 and you can maintain in what basis ie)in assending or desending GR Date you have to search the batch..
    And then Create Batch Search Statergy in MBC1 and there you assign the sort sequence in Details...
    Now  you do your regular procedings.....the material Batch will be searched based on GR Date...
    Reward if useful
    Regards
    S.Baskaran

  • Report for date variances between delivery and goods receipt date

    dear guru ,
    i search a standard report for date variances between delivery date in the purchase order and the goods receipt date.
    Do you help me ?
    Thanks

    Hi,
    Use Report ME80FN and here check the delivery schedule option in output screen.

  • Goods receipt date cannot be in the past

    hii
    While doing Po i getting below error
    " Goods receipt date cannot be in the past  "
    How to rectify this ?? and why its occuring ??
    Thanks

    >
    MM group wrote:
    > hii
    >
    > While doing Po i getting below error
    >
    > " Goods receipt date cannot be in the past  "
    >
    > How to rectify this ?? and why its occuring ??
    >
    > Thanks
    Check the error No. If error is standard, then we can change the error message to warning, if the error is ABAP generated, we cannot get it changed. Usually ABAP generated errors are created as per clients requirement and can be changed with client and ABAP consultation.

  • PO report for field:Latest Possible Goods Receipt Date

    Hi Gurus,
    can you please recommend me a standart report of Purchase orders, where is possible to see field from PO - item level - tab Delivery - field:Latest Possible Goods Receipt Date. It should be field MEPO1313-LEWED
    thank you!

    hi,
    please check it in me2n
    Purchase order list displays by Vendor                           ME2L
    Purchase order list displays by Material                           ME2M
    Purchase order list displays by General                           ME2K
    Purchase order list displays by Material Group     ME2C
    Purchase order list displays by Tracking Number     ME2B
    Purchase order list displays by PO Number     ME2N
    Purchase order list displays by Service                          MSRV3
    Aggregate PO History                                               ME87
    Analysis of Purchase Order Values                          ME81N
    Thanking you

  • Bill Passing to be done on the rate which is valid on the Goods Receipt Dat

    Dear All,
              My client has a very valid requirement which I am unable to provide. My client is basically a real estate company which is responsible for building. So the purchase cement, Paint etc. as raw material. The market rate of these raw materials varies almost everyday. So they maintain info record for material vendor combination. Then every day they change the price in percentage in MEKP.
              So suppose someone has created a PO on today or 20th July. So system will pick the value from info record whatever is maintained there say Rs10/- . Then suppose on 22nd July market price change to Rs15/- . So they will change the value in info record. Goods receipt against this PO is done on 23rd July .
               After GR they will do Bill passing on say 23rd itself. But system will take Rs10/- as this is the PO value. But my client wants it should take Rs15/- as this is the market price on Goods Receipt Date .
              My question : Can this be done ? Can Bill passing amount take the value from info record condition rate as on the date of goods receipt ?
              Please Reply ...
    Regards
    Abhijit

    Dear,
                   That is a goods point . But is there any provision that this updated price will reflect in MIRO automatically or by a single click . Because anyhow they can change the amount manually in MIRO . But accounts person should not have the authorisation to change the price during MIRO .
                   Price should come from price master or a single click somewhere in MIRO which will update the price to market price .

  • Goods issue date and goods receipt date

    Hi Guys,
                 i was asked to display STO list.They asked me add goods issue date and goods Report date in the o/p columns.So any body can tell me what are the fields for goods issue and goods Receipt date's.?can u guys tell me the Tr code for these fields .?
    Thanks,
    Gopi.

    Hi there,
    I already solve it by myself.
    Actually is i call the initialization twice:
    Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenEntry)
    Thats what make this problem happened.
    Sorry.
    Best Regards,
    danny

  • FI DOCS -Good Receipt Date

    Hi
    I need to calculate difference between invoice clearing date and good receipt date.Anyone know any datasources that contains those field? if there is no datasource like i am looking for how can i do this ?
    I am using 0FIAP_O03 ods and 0FI_AP_4  datasource which contains clearing date and some fields releated to invoice.Also i know there is a ods 0PUR_O01 and datasource 2lis_02_sgr contains good receipt date.Is it possible to create  multiprovider using 0PUR_O01 and 0FIAP_O03 ?
    Thanks

    Hi
    Have you tried infoset query in BW.
    You can join ODS and a table or ODS and cubes in the infoset joins i
    0FI_AP_4- LIFNR- 0CREDITOR
    2lis_02_sgr- LIFNR- 0VENDOR
    Common field you requested you can use them to join and get the results you want
    Regards
    N Ganesh
    Regards
    N Ganesh
    Regards
    N Ganesh

  • Substitution - Baseline Date to be replaced by the Goods Receipt date

    Dear Forum,
    We have the payment terms defined in the system, with the baseline date corresponding to the 'Document Date' and the credit terms as 60 Days. The users now desire that the Baseline Date should instead correspond to the Goods Receipt Date. To enable this we need to define the substitution such as the Baseline Date at the time of Invoice Verification gets substituted by the Goods Receipt Date, if the GR Date is earlier than the IV date.
    Would appreciate help from the friends as to how to configure this and which feilds to be chosen and replaced.
    Thanks!
    Regards,

    Hi
    You can make the Baseline Date in Invoice (MIRO) with Goods Receipt Date using BADI.
    BADI -->MRM_PAYMENT_TERMS
    Tell your ABAP Guy to work on this BADI.
    In the BADI,  MRM_PAYMENT_TERMS Read the Value in WEBUD of Internal Table TI_DRSEG and Pass it into E_ZFBDT.
    Also if the Baseline Date is changed manually, then after posting you can see the Goods Receipt Date in Baseline Date.
    This resolves your issue.
    regards
    venkat

  • How to pass  Goods receipt date in calling  BAPI_INB_DELIVERY_CONFIRM_DEC?

    Hi all experts,
    In my case ,I want to use FM:BAPI_INB_DELIVERY_CONFIRM_DEC to post the inbound delivery .  I want to pass goods receipt date when calling this fm. according to fm documentation as below,can use HEADER_DEADLINES to do it ,but in coding , How to implement it?
    thank you in advance.
    Bests & Regards.
    In this table, header dates are passed on in time stamp format (YYYYMMDDHHMMSS). In field BAPIDLVDEADLN-TIMETYPE the individual date fields are qualified as follows:
    - WSHDRLFDAT  Delivery date
    - WSHDRWADAT  Goods receipt date (planned)
    - WSHDRWADTI  Goods receipt date (actual)

    Hi,
    I have got the same scenario to populate the Actual Goods Receipt date from IDOC. Can you please let me know the solution that you implemented for this? I understand that this was long time back. But if you could recollect, please let me know the details.
    Thanks,
    Vanitha

Maybe you are looking for