Stock upload not possible thru MB1C.

Hi Sap Gurus,
Please help me to solve issue in delivery. I can't upload stock through MB1C. It shows the follwing massage......*Account Determination for entry INT GBB_BSA3100 not possible
Massage no--M8147
Digonisys--
The system didn't find an account for this transaction. This means that the account determination for the key INT GBB_ 3100 is not maintained in MM customization(valuation). The key is node of
-Chart of account
-Transaction Key(=Position indicator)
-Valuation Group code
-Account grouping code'
-Valaution class
System Response
The system can not update G/L A/c for this transaction. U can't post the transaction.
Procedure
Check Account Determination in Customizing for Valuation.
Note- The relevent Posting transaction can be found in Table T030A.
I have Material of Trading Goods (HAWA) with valuation class 3100 which is properly maintained in material master.
Need ur help at earliest !!

Dear Arindam,
Could you pls share me how did you solve the above issue and i am also getting same error while uploading initial stock with move ment type 561 in MB1C.
i had maintained same plant and same storage location.
Awaiting for experts inputs on the same.
Regards,
PJR

Similar Messages

Tariff scheme was created manually - upload not possible

Hi guys
I tried to upload german import numbers (purchased from BANZ provider). I used transaction /SAPSLL/LLNS_UPL101
Unfortunately I am getting the error message 'Scheme was created manually - upload not possible'
This scheme was already in the system (I guess it's standard) - how to deal with that?
For sure I need to delete an entry somewhere in the customizing - but where???
Your help is very appreciated..Thanks in advance!
Best regards
t.

Hi Tsunami,
If you maintained data manually and then after trying import from official XMLs you get this error.
Please clear these tables for your CTS scheme :
/SAPSLL/CTSNUM
/SAPSLL/CTSNUMT
/SAPSLL/CTSGEN
/SAPSLL/CTSGENT
or set field CREO in these tables to a value (for all commodity/tarrif codes) that will allow upload.
Probably a small ABAP report will help you in the fastest way.
Hope this helps,
Branislav Petricek
Edited by: Branko Petricek on Aug 2, 2011 2:54 PM

Intial stock uploading not taking place. after initial price uploading

Dear Pandits,
I am process of uploading initital stock uploading.
1.   Initital prices have been maintained thro MR21 as on 31.3.2009.( 12/2008)
2.   MM period has been opened for April 2009 ( 1/2009)
3.   When uploading the stock system giving error msg. "Price for Material 0000000004 in Plant 1000
      for Not found"
Please advise what could have gone wrong.
thanks
v balajee

Consumable materials are not having accounting view in normal practice, but if you are uploading through LSMw, tick of accounting view remove it, and if you are using the accounting view then add the value field in your LSMW and add the value columun and then upload because its moving average price its not the standard price.
regards,
qsm sap

Open stock updation not performed with MB1C

Dear Frieds,
While performing open stock updation with MB1C T-Code, an error message will appeared as " Material xxxx does not exist in warehouse xxxx". Kindly give the solution.
Regards,
Gopi

Hi,
Go to MM01, select warehouse - 1 & 2 views, specify the warehouse nos & extend the warehouse views for this material. Once the above is done, you can proceed to use MB1C.
Regards,
Vivek

Stock posting not possible

Hi All,
I am trying to put some stocks for a material using movement type 561 and transaction code mb1c,but I am getting an error which states"No stock posting possible for this material".
Please suggest how to proceed.
Regards,
Neelam

dear neelam
Please go to OMS2 Transaction,there u give ur material type, and enter then on the left side chose Quantity/Value Updation under dialog structure click on it.chose ur Valuation Area (.i.e,ur Plant) and material type.there will be tick under the Quantity Updation and also under the Valuation Updation.please remain the tick mark as it is under Quantity Updation.But please
REMOVE TICK MARK UNDER VALUATION UPDATION.then please don't forget to save, save n exit. then maintain stocks MB1C.
Defenetely i am sure that u will get the soluton for ur problem
rewards if it helps
siva

YouTube upload not possible

I want to upload my video to YouTube, but it appears a warning called "no interface".
How can I upload videos directly to YouTube?

See the FAQ entry How can I get the best quality video on YouTube? and see if that helps.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Error while saving INtial stock upload thru t-code MB1C

I am getting an error while saving the entered material quantity for initial stock overload thru MB1C
the error is "FOr object RF_BELEG GB10, number range interval 49 doesn't exist FBN1..
I am from SD module. Please help me resolve this issue.
THank you
Brian

Dear Brian
When you are carrying out the MB1C Txn, system document for account ing for the current is not existing, so you are getting this error.
Use FBN1 you will bet the screen Number Ranges for accounting Documents enter Your company code here "XXXX" then click the Intervals push button, you will go to the screen maintain number range Intervals , Check for 49 serial number whether you are having a number range for the current period if not then use the Insert Interval + button and enter 49 ,Year and the from & to number ranges. You can repeat the last years no. range in the current year also.
Best Regards
SAM
Edited by: samuel mendis on Apr 8, 2009 6:26 AM

The reporting point backflush is not possible for make-to-stock repetitive

Hi All,
we are using the assembly backflush in the MTS REM process. we are need to do the reporting point backflush
if we tick against the RP backflush. what will be the effect in the process while confirmation.
i read the sap library . it say like
The reporting point backflush is not possible for make-to-stock repetitive manufacturing.
is it correct.
Thanks
VRaj

Hi mangal,
i did all the setting as you said. but when click on the reporting point.
system thru error
Error reading reporting point information
Message no. RM111
Diagnosis
The repetitive manufacturing profile is set for the reporting point procedure. However, either no reporting points exist for the material or they are incorrect. Two common reasons for this are:
The repetitive manufacturing profile has been changed in the current session.
You have not defined any milestone operations in the routing.
When creating the product cost collector, no reporting points were created.
Procedure
Two alternative solutions are possible:
Assign a repetitive manufacturing profile with no reporting point procedure to the material in the material master record.
Recreate the reporting points by recosting the product cost collector. To do this, the following prerequisites must be met:
In the material master record, in the production version, you must enter a routing under either detailed planning (first priority) or under rate-based planning (second priority).
Milestone operations must exist in this routing. The system ususally automatically creates the reporting points from these milestones when creating a product cost collector or when creating a production version.
how to create the REPORTING POINT

Profit center document not created for initial stock upload

Hi Gurus
We have created initial stock upload for one of the inventory items through movement type 561.Though the profit center was populated in the line items the profit center document has not been created and when we go and run balance sheet profit center wise there are no results for display? Any suggestions ?

Hello,
Check your 3KEH Settings
Check your OKB9 account determination
Make sure you have profit center number ranges in GB02
Regards,
Ravi

HT1535 Can I upload music I have on my pc not purchased thru iTunes to my iPod Touch?

Can I upload music I have on my pc not purchased thru iTunes to my iPod Touch?

Yes. You just have to have the music in your iTunes Library. It doesn't matter where it originated.

Error :The function upload is not possible for this documentu2019

Hi,
The users are using Solution manager Help Desk system.
When a specific user tries to create a message from the satellite system, and tries to upload a document, he is unable to do so.
He is getting an error message : 'The function <upload> is not possible for this documentu2019
The message number is BCOS024.
The user is unable to attach word, note pads, excel etc. any types of documents.
He is able to type a description/ title etc and save the message. And the message is reflected in the Solution manager help desk system.
He comes across that message only if he tries to upload an attachment.
Please advice.
Thanks in advance.

Hi Kase,
What version of SAPGUI you use?
We had the same problem.
This problem was solved once we upgraded SAPGUI to 710 Patch Level 11.
Regards,
Sanjai

Upload of a document with arrow "up" is not possible.

Upload of a document with arrow "up" is not possible. The menu opens, but there is all gray and no possibility to click on "upload".
I have to change to lokal site/remote site and there the arrows are activ.
This happens since a have the latest version of Dreamweaver CC 2014

Thank you for the quick answer.
I am referring to the icon „arrows up and down“ in the panel. Right side on the top, next to the icon „Browser“.
I tried CtrlShiftU too. No success. L
Von: MurraySummers
Gesendet: Donnerstag, 6. November 2014 17:20
An: Margot Cane
Betreff: Upload of a document with arrow "up" is not possible.
Upload of a document with arrow "up" is not possible.
created by MurraySummers <https://forums.adobe.com/people/MurraySummers> n Dreamweaver support forum - View the full discussion <https://forums.adobe.com/message/6905675#6905675>

Warehouse management stock upload

Dear all,
I have done the entire config of WMS. When i am trying to upload stock thru MB1C and movement type 561 i am getting the error..' storage bin 002 998 AUFNAME' does not exist.
Thanx in advance.
Regards,
Pankaj Jain

Have posted IM transaction with 561 movement? This posting will create quant in 998 storage type. When you do 561 in WM then system will pick stock from 998 storgae type & put in destination bin.
First do IM posting & then WM.
Regards,
Prashant

Goods receipt not possible for delivery 800015869: error code 1

Dear friends,
I am doing MIGO-GR for outbound delivery, but getting error once inputting outbound delivery no.
Goods receipt not possible for delivery 800015869: error code 1
Message no. M7865
Diagnosis
The goods receipt for the delivery cannot be posted.
The error according to the error code:
1. The delivery does not exist.
2. The delivery type is unknown.
3. The delivery is not goods issue posted.
4. There are no delivery items.
5. The receiving plant could not be determined.
6. The delivery items have already been goods receipt posted or contain zero quantities.
7. Goods receipt(effect)movement type to goods issue movement type could not be determined.
8. It is not currently possible to block the delivery.
Procedure
Error code 1      : Check your entry.
Error code 2,3,4,6: Check the delivery and its document flow.
Error code 5      : The delivery must be related to a purchase order or
                    the customer must be a retail business.
Error code 7      : Check the settins for your movement types.
Any poniters to check the setting in PO or delivery or any setting in SPRO.
Regards
Ashutosh

Hi Anupam,
That is the requirement of my scenario
That is happening in intercompany posting.
I am explaining to you.
say total stock for article AR is 1000 ( In DC --A it is 500 and in store B it is 500)
I have two company codes X and Y
One DC (A) belongs to X and second store (B) belongs to Y.
I have stock available for say article ( am working here in IS Retail instead of material ) in both DC --A and Store --B.
Now I have created PO thru replenishment planning WRP1 , now in PO supplying plant is DC.
Now I did delivery thru VL10B and then picking and then PGI.
Now my stock is reduced in DC by PO quantity created.( let us assume it is 100)
So now total stock in DC=400
Now this stock is in transit we can check thru MB5T. so total stock in transit = 100
Now I have to do GR against delivery , if I will do GR for 100 nos , there will be no stock in transit
and stock of receivibg store (B) will increase by 100 nos.
But I am not able to do GR against delivery so I did GR against PO for say 50 nos. In this case stock in store is increase by 50 nos.
But there is another stock in transit available=50
Now why GR is not happening against delivery but it is happening against PO???
Any pointers

Direct Posting is not possible for G/L accounts

Hi,
Procurement of Consumables thru Maintenance Order(for Breakdown Maintenance):
1. Generation of Purchase Requisition thru maintenance order .
2. Purchase Order from purchase requisition
3. MIGO
4. MIRO
The required consumables are assigned in maintenance order. when converting PR to PO this consumables will automatically flow. According to the valuation class and gl account in material master GL account will also flow automatically.
When converting PR to PO the system throws an error saying that Direct posting is not possible for the G/L account.
I made this GL account as post automatically to ensure that there should be no manual postings for such automatic account determinated GL accounts thru valuation class.
This error can be resolved by removing the tick mark post automatically but is this correct. If it is so then what is the implication of automatic a/c assignment thru valuation class.
<removed_by_moderator>
Thanks in Advance
Regards,
Radhika
When I am trying to use a G/L account for a Consumable (eg: diesel) (that is required for Maintenance) at PO level (through maintenance order) system throws an error sying that Direct posting is not possible for the G/L account.
Also, teh Same G/L

Hi,
Your balance sheet accounts for stock should be defined as for direct postings only. But the P&L accounts should not be marked.
Regards,
Eli

Stock upload not possible thru MB1C.

Similar Messages

Maybe you are looking for