Stock valuation different for different storage location in same plant

Hi SAP Gurus,
Please provide me a detailed idea and solution for this.
My client has simulated several transactions in MM.
Say it has two storage location 1110 and 1120 under plant 1100
Now in 1120 there are stock movements pertaing to a project (includes stock transafers from 1110 and issues made to project)
Finally, the MB52 report is showing valuation of stock (unrestricted) at different rates for 1110 and 1120.
My client is raising issue, saying the value should be same for stock under a single plant as valuation is done at plant level.
Also, both the stock is under unrestricted category, so valuation should be same.
What could be the issue?
Any solution?
The auditors will raise issue over this.
Please help ASAP.
Regards,
Sumit

Hi Sumit,
In valuation using the moving average price (price control u201CVu201D), the system valuates goods receipts with the purchase order price and goods issues with the current moving average price.
So, for Plant 1110 the rate could be the PO price used for procuring the material whereas for Plant 1120, it is the moving average price and hence the difference in rates.
However the auditors would look after the Material Valuation at the Valuation Area level which is the Plant.
Thanks,
Ankur

Similar Messages

  • Transfer project/ SO stock between 2 storage locations of same plant

    HI,
    We have a requirement in which the we have to transfer  project/sales order stock between 2 storage locations of the same plant.

    Transfer between storage location.
       311 Q - Project Stock
       311 E - Sales Order Stock
    Transfer between storage location to own stock
       411 Q - Project stock to own
       411 E - Sales Order to own

  • Transfer between storage location to storage location within same plant

    Dear Gurus,
    We r doing storage location to storage location transfer within same plant through purchase order.
    Due to excise requirement we have to raise excise invoice for the same for captive consumption purpose.
    Is it possible to make it One step procedure so that GR will take place at same time as GI the way it works for plant to planrt.
    In ECC 6.0 option is there for transfer between storage location. I configured but it is not working.
    Please check the same.
    Rgds,
    Saurabh

    Hi Saurabh,
    The proceedure you are following is a bit wierd. But I think this is as per your business requirements.
    You can continue to follow the same proceedure as this may  not be possible through one step movement type.
    Best Regards,
    Prateksha.

  • Stock transfer between 2 different storage location

    Hello ,
    Is anybody can help ? We have below scenario :
    Plant : P1 P2
    WH  :   W1 (W1 cross 2 different plants P1 and P2)
    Storage Location : S1 S2 under W1
    We want MRP can trigger the replenishment between 2 different storage location within same warehouse
    but the warehouse is cross 2 plants
    Thanks !

    Dear Denny,
    Pls. maintain following setting which will fulfill your requirement :
    Go to Material Master -> MRP-2 View -> Special procurement type
    40     Stock transfer (proc.from alter.plant)
    Try above & revert in case any doubt.
    Hope this helps.
    Regards,
    Tejas

  • Stock transfer order between two storage locations in IS Retail

    Hi,
    I want to have a Stock transfer order between two storage locations in the plant.
    I have activated the "Activate Stock Transfer Between Storage Locations", now i can create a STO and have the "Issuing SLoc" tab.
    Having that i get an error message "Not possible to determine shipping data for material XXX" Message no. 06280.
    I am trying to have the shipping data in customizing for set stock transfer - "Define Shipping Data for Plants", but my site is not listed due to the use of IS Retail. Is there a way to configure it?
    Tnx
    Lior

    Hola.
    Voy a contestar tu pregunta en espanol. Debes crear al centro  emisor  como  deudor  en la transaccion WB02  y ampliar a la organizacion  de compra.
    Posterior, debes crear al centro  receptor como  acreedor en la transaccion  wb02.
    Cesar Moreno. Funcional MM Retail.

  • Po list   for perticuler storage location

    dear sirs,
    is it possible to see the po list for perticuler storage location of perticuler plant ?
    Regards
    kailas ugale

    HI,
    Yes, it is  possible to see the Purchase Order list for particular Storage Location of particular Plant as follows.
    Using T-code ME2N - Purchasing Documents per Document Number, the input data to be given as follows.
    Plant : _______
    Scope of List : ALV
    Document Date : __________ to __________ (report require period)
    If the report input data Storage Location require, you have to select Dynamic Selection button(Red,Green,Blue color button) and shown 2 options are as follows.
    1) Purchasing Document Header
    2) Purchasing Document Item
    The above option, you have to click Purchasing Document Item shown Storage Location field double click and give input data  Storage Location  ______ (list of PO require Storage Location)  and execute the report. The particular Plant and the particular Storage Location  list of purchase orders displayed.
    Hope, it is useful for you.
    Regards,
    K.Rajendran

  • Can we delete material for particular storage location using MMSC

    Hi,
    Can we delete a Material for particular storage location of a plant usign MMSC Transaction?
    Thanks in advance.
    NDS

    Hi, It is not possible to delete the storage location from MMSC once it is saved, Material gets extended for that storage location, U have to delete the material at the storage location level.
    Now the only option to delete this assignment is with archiving.
    T-code: SARA object MM_MATNR
    Refer below link for procedure
    [Deletion Storage Location From MMSC  |Re: Deletion Storage Locaion From  MMSC]
    [Cannot delete Sloc in MMSC|Re: Cannot delete Sloc in MMSC]

  • Different safety stocks for differnt storage locations?

    Hi all,
    Can any one tell me if it is possible to set two different safety stocks for two diffetent storage lacations for one materila?
    If yes, How?
    Thank you,
    Utpal

    Hello UNP,
    Normally, planning is useally carried out at plant level, however you can do MRP at Sloc level as well.
    Safety stock is planning data which is defined for entire plant where as reorder level and replinishment quantity can be defined saperately for each storage location, but not safety stock.
    hope this helps.
    Regards
    Arif Mansuri

  • Movement type for blocking to a different storage location

    Hi Gurus,
    Is there any movement type by which the stock should move to blocked from unrestricted but to a different storage location. In the mvt type 344, the stock moves from unres to blocked but it is in the same location.
    Regards,
    Kumar

    Hi Kumar,
    344-Transfer posting blocked stock to unr.-use stock - reversal, is reversal of 343-Transfer posting blocked stock to unrestricted-use stock that TP Block to TP unrestricted.
    Better use 343 for transfer posting from Block to Unrestricted.
    If the reciveing storage location is not avliable while TP with 343 then goto OMJJ enter 343 movement enter , duble clikc on
    Field selection (from 201)/Batch search procedure and then goto Details(Lens) and then in the Select group double click on "Transfer Postings" and then make receiving storage location as req/opt entry and save.
    Then try do to TP for different storcge location for same plant with 343.

  • QM/MM: Stock transfer from QI to QI in different storage location

    Hi Gurus,
    I want to transfer a QI stock to QI stock in the same plant but different storage location using MB1B – 323 movements. But it has got QM status active. So without taking usage decision it doesn't allow us to move the stock. It needs a special inspection type which allow this transaction.
    I don’t want to create another inspection lot and don’t want usage decision.
    Can anyone suggest me the solution?
    Thanks
    Shiv

    Hi Laxman,
    Thanks again for your suggestion to use QAC2.
    Is there any way of of scapping the same stock stock having inspection lot , status QI w/o UD?
    Thanks
    Shiv

  • Different Storage Location required for RGA

    Hi,
    My requirement is that whenever Returns is done for SO, different Storage location should default, which is currently not happening.
    For ex - Standard Storage location(0001) is determined whenever SO is created but we want that different storage location(say 0096 which is created for Returns) should be determined whenever Returns is created.
    For these I have made the following config settings :
    Defined 1000(Shipping Point Std) which is assigned to Plant(BPX1)
    Also 1100(Shipping Point for Returns) is assigned to Plant(BPX1)
    Storage loc (0001- std) is assigned to Plant(BPX1) and warehouse no (BP1)
    Storage loc (0096 - for Returns) is assigned to Plant(BPX1) and Warehouse no (BP1)
    In OVL3 following settings done:
    Shipping Point (1000) , Plant (BPX1) than storage loc - 0001(Std)
    Shipping Point (1100) , Plant (BPX1) than storage loc - 0096(Returns)
    Still when we are creating returns storage loc 0001 is defaulting in Returns and NOT 0096 (Which is my requirement).
    Kindly advise which config settings are still missing to determine 0096 storage loc in RGA.
    Thanks in advance

    Hi,
    I have ticked the Plant and movement type in OMJ8, but still same storage location is coming while posting the Returns.
    Thanks

  • Could WM setup same location in different storage location type ?

    Hi
      Now we have same part  but which is bought from different vendor by currency RMB or USD.
    We hope when we receive material,  it will receive material by currency into different storage locatio type , Or Could we use mb1b to move mateiral in different storage location type ?
    If there is any advice, please tell me , Thanks
    Thanks
    Alice

    Hi, Expert
    Really appreciated for your help. Currently for same part, we possibily buy it by different currency . Somteimes it's RMB, sometimes it's USD.
    We use migo to receive these mateirals , most are in WM module, Some in IM module.  Currently, when we receive po, in stock, we only track the qty. but now we hope to find a way if we also could mark the currrency on the same materails. 
      To provide matierals to production , we still need place the material in on location. Since when we delivery material /componet, we don't care its currency.
    So we think if in WM, we could use different storage locaiton type for one location and seperated by different currency ?
    Thanks
    alice

  • How to run MRP on different storage location level ?

    Dear Experts,
    Need your valuable guidance to solve the below requirement form the client-
    1) My client want to enter a "safety stock level" for one spare part/ Material on the basis of individual storage locations.
               For sake of example: in SL01 he wants the safety stock for particular material set to 5
                                  In FS18 he wants the safety stock set to 2
                                  In FS15 he wants the safety stock set to 1
    Kindly tell me whether it is possible? & guide me how to do it.
    2) Also tell me how to run MRP on a storage location level?
               This is because after maintaining different safety stocks for one material in different storage locations,  is it possible to appear each storage location with their differing safety stock levels?
    I checked the MRP type maintained & its-1 (plant) & not as- 2 (storage location).
    Kindly guide me for the above issue
    Thanks in advance for your support.
    Regards,
    Mehul

    Hi Umashanker,
    Thanks for your suggession . Accordingly I have resolved the issue.
    Regards,
    Mehul

  • Picking quantity from a different storage location during batch split??

    Hi Gurus,
    Have an issue with doing batch split in a delivery with batches from several storage locations.
    Have delivery XXXXXX where I want to pick batches from several different storage locations.
    I click on the batch split button and select the different batches and quantitys.
    The issue here is that I would like to have the different storage locations entered automatically based on the selection of the batch I have made.
    The only storage location that is entered here or possible to be entered is the defaulted storage location that is in the first screen...
    My question is why can I get the storage location where the batch is located and acctually exists when I do select the batch in the batch split...
    The table LIPS and LGORT is not filed with the storage location so I do not know how I could fill this field with the correct storage location data...
    Thank You for all Your help!
    BR,
    Christian

    Hi Christian,
    you have not jet got an answer  -- here my suggestion.
    You have to use the Userexit Mv50afz1. Here you can do some checks and  you can do a popup, where you can sign the LGORT, where the batch is.
    In any case, you need an ABAPer
    In documentation, there is signed, that you should not change database other as Save_prepare - and that's too late.
    In one solution at my company, i show in a message the right information. In an other solution, i made a modification of table lips.
    But dont change the index of the current lips/xlips. That may have the effect of incorrest LIS - System.
    If nessesary create an ylips- Line of the position.
    Use an assign-command to avoid the change of the index.
    hans

  • Mrp - Purchase request split by different storage location

    Dear all,
    I have a plant with many storage location; One of these , s001, is located in a different street , so have a different address.
    When user needs material for this storage location s001, he creates a reservation by trx MB21.
    Storage disposition is deterministic , NO reording point .
    I need to split purchase request in case of this storage location s001, but Mrp standard collect purchase request for same vendor / plant .
    Do you know a user-exit for do that ?
    Regards,
    Silly

    Hi Satya,
    1. The Requirements are consolidated at plant level and not at the storate location level.
    2. Also in the PR/PO the storage location is derived from the data of the material master record. ( default rcvg s.loc)
    3. So in case if you need to split, first you need to Split your PO and in the PO the Item data, Recieving s.location should be
        edited in this.
    4. Even if you Find a User Exit, We need to have manual intervention on this.
    Reg
    Dsk

Maybe you are looking for