Stock Value on Posting Date

Hi SAPians,
I can get Stock Quantity on Posting Date from report MB5B.
Is there any Report which can give me Stock Value on Posting Date?
I have searched a lot but yet not found it.
Please help in this regard.
regards,
Jignesh

Thanks a lot friends for your answers.
i have execute report and analyzed it but i have one query.
If i am executing report for 31.03.2008.
The shown material Stock Value on 31.03.2008 is on the basis of MAP at 31.03.2008 or on the basis of MAP at Current Date.?
Thanks in advance.
Regards,
Jignesh

Similar Messages

Bapi/function module to get opening or closing stock for a posting date

I am creating a report where i need to get the opening stock value and closing stock value for the given starting date and ending date respectively for the PP report.
The T-code for that is MB5B.
So,can any1 plzz tell me how i can get the stock value for a starting date/ending date...
Is there any BAPI or function module to find this out..
or any logic?
Thanks.

Hi Kiran,
You would like to findout opening and closing stock of a particular period and of a particular period....
If we would like to findout opening and closing stock of material A as of 18 / 8 / 2008,
then do like this.
go to MBEW table .. there u get opening stock as on today. Today the date is 20/8/2008. from today's opening stock if we add / subtract the movements which have happened on 19/8/2008 and 18/8/2008 u'll get opening and closing stock as on 18/8/2008.
U get the movements from MKPF ( material doc header) and MSEG (material doc item ) based on posting date. In MSEG u get movement type.
If the movement type is 101, it means the stock is added.
If the movement type is 102, it means the added stock is reversed.
from today's opening stock deduct the stock with moverment type 101 and add the stock with movement type 102.
This will give u opening stock as on 18/8/2008.
To get closing stock of 18/8/2008 ..... the opening stock of 19/8/2008 is 18/8/2008's closing stock.

MB5B - Closing Value for Posting Date inconsistently reported.

Greetings,
I am executing transaction MB5B in ECC 6.0 for a single Posting Date in November of 2008. The parameters include 3000 ROH materials (selected by MIN/MAX material number ranges) in 30 plants within 3 different companies (selecting all by leaving these values blank). The problem I am having is that I am getting a different total USD valuation each time I run the report. If I run the report 3 times in 15 minutes I will get 3 different USD totals. Difference is usually small (.006%).
At times I will get exact matches. Yesterday, 3 out of 5 runs were exactly the same result.
Can anyone advise what might be causing this variability? And how it might be corrected. Either by using different selection parameters of another more reliable transaction code.
Regards,
Joe

Hi,
If you post in the previous period and the material price in the previous period differs from the current price, the system generates a stock posting and revaluation line with the same value but opposite signs.
You can ran an inconsistency check report using SE16: MBEW
Go through SAP Note 518368
Bye,
Muralidhara

Highest stock value on particular date.

Hi all,
Where we can find the highest stock value for particular material for particular date .
for the insurance purpose, we want to identify on which date highest stock value is lying with us.
Thanks & Regards,
Vinay Patel

Hi Hareesha,
You have given me transaction code for mean stock & mean value.This is not solution for my question
total stock    total value          date
100                   500             01.02.2007
50                    300            02.02.2007
200                  600             03.02.2007
225                   580             04.02.2007
so here 0n 03.02.2007 its showing highest value.
Thanks & Regards,
Vinay Patel

Unable to view stock on a posting date

I'm implementing inventory scenario in BI.
Initialized the stock in R/3 and uploaded into cube 0IC_C03 through 2LIS_03_BX.
Also initialized 2LIS_03_BF and uploaded into the same cube.
When i run a query, I see opening stock.
But if i change posting date to view stock for that date, I dont see any change in quantities.
Seems like the material movements are not being captured into BI.
Please help...
Thanks in advance

Elangovan,
yes, with 2LIS_03_BF, 888 records were added.
I compressed both requests, 2LIS_03_BX WITH marker update and 2LIS_03_BF with NO marker update.
You asked about maintaining markers, not sure if there was anything else to be done?
Also, please help me with the transaction keys...not sure what that is. I'm new to inventory management in BI.
Thanks

STOCK VALUE ON PERTICULAR DATE

Hi Experts,
Here my clent having one requirment i.e they want to see stock position on perticular date by storage location wise and sub contractor wise also for that I have to give specification to my ABAP Consultant please help me for this specification.
Regards,
Suresh

Dear Suresh,
use table s033 table to pull the data of Movements for Current Stock ,
where u can use the key object as SPTAG,
lakshmi reddy

STOCK QUNTITY on posting date at a plant level

I need the stock quntity , issue quntity , reciept quntity and averege quantity at plant level for a period of week, and month
Is there any function that can do it or any table that has those detailes or any program?

Hi,
Check S031 table. It is a LIS info structure which store all goods movements in your system. But the key would based be on the variant your system configured to. I mean it will be either by Fiscal period/ Week/ Calendar Month for plant material.
Hope this will give you some clue.
Regards,
Nagaraju Chidurupalli.

Stock on posting date GL wise

dear sir,
can i have the transaction code for stock on posting date GL wise.
IN MB5B THERE IN NO FIELD WITH GL AND IN MB5B THERE IS NO POSTING DATE

Hi,
There is a posting date in MB5B !!!!!!!!!!!!!!!!!
The whole point of MB5B is to give you the stock on a posting date.
The field is called "Selection date".
Steve B

Restrict goods issue if stock on posting date is zero

Requirement:
Current Inventory period : July 2011
Stock of a material from 01.07.2011 to 30.07.2011 is zero(in MB5B report)
I upload stock of material or GRN occur on 31.07.2011. Say Quantity u2013 100
Now stock as on 31.07.2011 is 100 in MB5B
Still, Stock of a material from 01.07.2011 to 30.07.2011 is zero(in MB5B)
Now, If I do goods issue of a material quantity 100 on 15.07.2011. System allows goods issue. though opening and closing stock as on 15.07.2011 is zero.
After goods issue transaction if I check stock of material on any date between 16.07.2011 to 30.07.2011 , The opening stock and closing stock shows negative.
I want to restrict goods issue if stock on posting date is zero or less then stock available on posting date.
Please suggest

Hi,
This is not the way SAP is designed. As the previous speakers wrote (and as you noticed yourself), SAP maintains stock figures in the database per month rather than per day. MB5B makes complex calculations in order to find out how much stock you had on a specific date - as you probably noticed on the response time. Performing such calculations every time you do a GI would be unfeasibly heavy task for the system - remember there are organisations that perform hundreds of inventory movements a minute!
An alternative solution I suppose would be to maintain the daily stock figures in the database. This would make the finding of the stock figure very quick, but on the other hand, the maintenance of such table would be unfeasible - if you post today a GI on say July 1st, you would need to calculate 36 stock figures and update 36 database records!
Hope this explains the technical issue.
BR
Raf

Stock at a certain date.

Hi,
how can I find the quantity of stock at a certain date ?
Yours truly

Hi
Use transaction code MB5B for stock on a posting date.
Thanks & Regards
KK

Stock upload - Goods receipt date, FIFO

We are doing our initial stock upload using LSMW based on goods movements.
When posting a goods movement the posting date will be used for FIFO considerations.
That's fine when your system is operative, but during the initial stock upload the posting date will be the same for all movements, which is not what we want.
Is there a way to transfer a GR date from the legacy system?
(Opening the posting periods to any date in the past is not an option).
Any ideas?
Thanks
Andreas

If you had a GR on May 2nd of 1000 and another GR on Oct. 1st for 500 and your currect stock is 800, then you just know that the last GR date was Oct. 1st. But this is not the truth for all stock on hand. So FIFO cannot work. So the field has just information caracter.
SAP will capture such info at batch level. Different software, different concepts. so each batch can have its own last GR date, and you distinguish the stock by batches, and can use batch search strategy to find the oldest one.
Without batch managment, SAP has this information about last goods receipt at quant level in warehouse managment. Do you use WM module?
(even then I have no standard solution to manipulate this field while doing the stock load)

Change Posting Date In MIGO

Hi,
I've a requirement in which i need to change the value of posting date (previous date) based on a particuler value of plant and material type for transaction MIGO. Is this possible through any of the exit or Badi or field exit.
I had tried through field exit but in that i am unable to access the value of plant and material type. Is it possible.
PLZ HELP!

Annie,
            you can try with this
Business Add-in
MB_DOCUMENT_BADI_SAP                    BADI for Creation and Changing of a Material Document
MB_DOCUMENT_UPDATE                      BADI when updating material document: MSEG and MKPF
MB_CIN_LMBMBU04                         posting of gr
Amit.

GR Document number & posting date in drill down option? (Reporting)

Dear Experts,
As im new to reporting,i had a requirement from my client..the question is
This is with regards to report Order Values on Posting Date (0PUR_C01_Q00021)
Can you add GR Document number & posting date in drill down option?
i guess if i keep both of the in free characteristic,it will be the result,please suggest me on this
Thanks & Regards,
Srikant

Dear Experts,
My Client requirement is he want GR Document number and GR Positing Date in the drill down option,im not able to find them in the query designer level. the query is under the cube 0PUR_C01. any suggestions will be a great help..
Thanks and Regards,
Srikanth

Restriction of posting date in transaction CO11N for partial confirmations

Hi all,
 I am trying to restrict(by checking thru an exit) the posting date in co11n , for this i m using enhancement CONFPP04.
 Import parameter AFRUD_IMP IS USED.
 Now when i m putting production order no , operation activity no.(for e.g 10 , 20 etc ) and posting date IN SEL SCREEN OF CO11N
 AFRUD_IMP-BUDAT( POSTING DATE ) CONTAINS VALUE in debugging mode , hence i m getting the value of posting date
 and in that case check is written in code. This is the case of full confirmation.
 But in case of partial confirmation i have to give production order no , operation activity no , *Partial confirmed qty * and posting date , in this case the posting date value changes to 0 in the debug mode ie.
AFRUD_IMP-BUDAT is showing 0 and hence no calculation can be done base on the date.
 Our requirement is such that if there is a prd order no say X,
then in CO11N if user enters prd no X , operation activity no 10 , post date say D1
then again for prd no X , operation activity no 20 , post date of activity 20 should not be less than D1
SIMAILARY for X, ACTIVITY 30 , post date should not less than that of activity 20. and so on.
 But if partial quantity is mentioned value of AFRUD_IMP-BUDAT is becoming null.
 If anyone knows about this scenario please share.
Thanks and regards
Pankaj Gupta

Hi, In the T-code Mb31
The Posting Date which is used is when entering the document in Financial Accounting or Controlling. The fiscal year and the period for which an update of the accounts specified in the document or cost elements is made, are derived from this posting date.
When entering documents, the system checks whether the posting date entered is allowed by means of the posting period permitted.But this posting date can differ from both the entry date (day of entry into the system) and the document date (day of creation of the original document).This is for the practical purpose .
So its for the Monthly permitted and not for a day or range .
Secondly when you are saying :
"We want this default date to get freeze the moment you enter
the transaction (MB31). If you are opting for second option we want
some flexibility to change the date as required."
Both freezing and opting for changes is not possible , either one can occur .
You can freeze/display mode only the field for the T-code and the document type, but that will not solve your problem .
What i understand from the description is you want to Do GR on A particular date or GR should be allowed after a particular date . Please let me know if this is the case then there's a way around to do this that is you can do GR and Post on the dates near to your desirable dates .
cheers KP

Inventory: Movement after count with post date before the count date.

Hi,
We have stock movements all the days of the week.
We conduct physical inventories on Sunday mornings. There are not stock movements on Sunday mornings (stock movements on Sunday starts at night).
Usually we create the SAP Physical Inventory Document on Fridays, assigning Saturday as the Planned Count Date.
We enter the SAP Physical Inventory Count on Sunday (at the end of the count) or on Monday.
How you recommend us to use SAPu2019s Physical Inventory feature in order to calculate the Book Inventory considering all stock movements with posting date less than or equal to Saturday?
Please, suggest us a solution that If we register a movement after we enter the count but with post date before the count date (and the count is not posted yet), the Book inventory is modified accordingly.
Thanks in advance for your support!!

SAP takes the book inventory in the moment you enter the count.
Best you set block movements , this block will be removed automatically when you enter the count. So you can prevent users from posting until you have entered the count.
If you set the freeze book inventory, then SAP takes the book inventory in the moment you create the document.
This is not a good way if you still have movements after inventory document creation and actual count.
You have to make sure - organisational wise, outside SAP - that all movements that happened before inventory count are posted before you start entering the count. There is nothing in SAP that can help you in this case.

Stock Value on Posting Date

Similar Messages

Maybe you are looking for