Stock value

hi all
how can i get stock value of a particular material on particular date
note: date may be in current period or in previous period.
Regards
Ravi

Hi,
You can use Transaction MC.9 for details about stock in previous period.
Go thru the step(if required) [MC.9 Previous Period Stock|http://www.kowboyz.nl/blog/stock-previous-periods-mc9/]
Or go thru the thread which discusses which tables are relevant to get data about previous period stock.
[Table for previous period stock|Table for previous period stock;
Hope this is what you are looking for!!
Reetesh

Similar Messages

  • MC.9 Stock value not correct

    Dear Friends
    In  mc.9 stock value is showing different than MMBE stock. What will be the reason?
    Regards,

    In   selection screen please select radio button u201C Current Priceu201D instead of u201C Standardu201D . It will give correct value.
    With regards,
    Ajay

  • Stock value is not getting updated in APO system From ECC automatically

    Hi All,
    Stock value is not getting updated in APO system From ECC automatically but if we do it manually from transaction CFM2 it will get updated.
    for this we are using EXIT_SAPLCSTK_001.
    I am using VL10A for delivery and VL06G for PGI
    I have also checked integration model for material and stock.
    Please help me out as it is very urgent.
    Thanks,
    Gaurav Mittal
    Edited by: GAURAV MITTAL on Feb 6, 2008 6:09 PM

    Hi,
    for transferring the stock data from R/3 to APO automatically, you need to have the integration model for material and stock activated.
    please check the same.
    if this does not help, let me know in detail the steps which you are following..
    Ram

  • Items with  zero stock quantity show negative stock value in Stock reports

    When running Stock reports for controlling the stock value towards the GL accounts, some items appear with zero stock quantity, but the report still shows a stock value  (negative value in my case)
    How can this happen, and how can I correct this situation ?
    System parameters are :   negative stock is not allowed, Items with zero cost price not allowed. On item level average cost price method is used.
    P.K.Johnsen

    Hi Johnsen,
    I believe you have checked the" Manage Inventory by warehouse". I have noticed this issue in SAP B1 2005B but this is rectified in 2007B. The system behaves in this way as the system maintains item cost for the item for all warehouses and even if the stock is not present in the warehouse, the system would still show you a value for the same. Hope this helps. please search the forum. You'll find related threads.
    Thanks,
    Joseph

  • Changes in stock value of the material even after closing period

    The client closes the accounts every month end. Say they close the books of accounts for the month of Jan’07 on 31st Jan 2007. After closing the account they are running MC.9 to know the stock value of different plants for the previous month. i.e.  for the month of Jan’07. But every day when the client runs the MC.9 they found some differences in the stock price & quantity.
    For better understanding, consider they close the period on 31st Jan. When they run the MC.9 on 2nd Feb it shows the value say 100$ and qty of 100. When we run the same report on 4th Feb the value got changed to say 98$ and qty remain same. Again when we run on 6th Feb the value is changed again to say 102$ and stock is 100.
    We checked the MB51 with posting date & entered date. We could not find any back posting.
    What could be the reason for the  variation in the stock price & qty ? Any pointers will be highly appricated.

    Hi Venkat,
    Your previous posting talked about variation in stock value and now you are saying that there are changes in stock qty also. So the better option would be to check those material which has variation and compare them with other standard reports to get a solution. Export the list of material to an excel sheet and compare them with that of the other reports. This would help you to find the materials which has changes and you can narrow down to the root cause. Once you get the material then u can go by posting date and find the movements.
    Hope this helps. Reward if u find it useful.
    regards
    Anand.C

  • Custom Report for the Stock and Stock value for a specific date

    Hi SAP Gurus,
    Is there any SAP standard t-code or any logic to get the transcations (additions (for example: Purchases) and subtractions (Sales) to the inventory) for a particular materials in a plant and with Total Stock and also Total Stock value when that particular transaction happened?
    Our system is R/3 4.7
    I looked at the MB5B, MBCE, MBCA, MC44, MB51 and some other standard T-codes but could not find the total stock value at the time of Transaction happened.
    The history tables MBEWH and MARDH  are updated after the month end closing procedures, right, which means I will have the inventory value changing every month if material has Price "S".
    Thank you,
    -Harter

    Hi Harter,
    Unfortunately, you cannot see in a single tcode the value of stock and stock quantity on a specific date. As you yourself have pointed out, we only have to make use of the history table MBEWH, MARDH for the month wise stock quantity and value. Along with that you should also make use of the table MBEW to take teh stock quantity and value. So the total value of stock on a particular date will be
    Stock qnty = MBEWH value until the previous month (for teh specific valuation class, period etc) + MBEW value for the present date.
    But this will nto work out if you want to find out teh stock quantity and stock value on a past date basis. For past data, only  m onthwise data is available. For this anyway you can refer to MC.1 and so on reports.

  • Stock value and report

    Hi,
    how determing <b>stock value with reports</b>?
    Best regards

    Hi,
    There are quite a few standard reports which will give you the stock value report, you can try
    MC.1 to MC.9 (gives you various stock value analysis reports), MMBE, MB5W etc.
    Alternatively you can extract this data from MARD table.
    If you are looking for a specific report, please let us know the same & we can be more precise in the output.
    Hope i was able help you on this issue.
    Regards,
    Vivek

  • Stock value showing Negative but Qty is Null

    Hi Gurus,
    I am using the Transaction MCBA, where i am getting the details regarding the Received Stock qty, issued stock qty ,Total stock on hand and the Total stock Value.
    Here i am getting the values Zero for Received stock qty, Issued stock qty and the Total stock. But i am getting the Stock value in Negative.
    When i checked the Tables it is showing as Zero only.
    Please advice what needs to be done or what went wrong where.
    Thanks in Advance.
    With Regards,
    Saakithyan.

    Answered

  • Need to display the Stock Values at storage location level - 0IC_C03

    Hi All,
    I am developing Stock Movent Report on 0IC_C03 - Material Stocks/Movements.
    I have more than one storage location for plant. Stock quantities are calculating at storage location level and Stock Values are calculating at plant level.
    I have no issues with quantities. Only problem with Values.
    2LIS_03_UM is not picking the starage location, so that the revaualtion values are falling under unassigned nodes. When i set filter on storage location these values were not showing as they are under un assigned nodes (#).
    I want to get the Stock Quantity and Stock Values at Storage location level in my report.
    I found that soulution for that is Applying SAP Note : How to Realize summarized display of stock values on storage
    I have done development as per the document. But when i run the Query it is going to debug mode first and then it saying This program cannot display the webpage
    Can any one faced the same situation, Please help me if so.
    Thanks in Advance.
    Gopal N

    Hi Sachein,
    I am getting this An exception(CX_RSR_PROPAGATE_X) occured when debugging, and then it leads to next screen saying that:
    This program cannot display the webpage
       Most likely causes:
    You are not connected to the Internet.
    The website is encountering problems.
    There might be a typing error in the address.
       What you can try:
         Check your Internet connection. Try visiting another website to make sure you are connected. 
         Retype the address. 
         Go back to the previous page.
         More information
    Please let me know you need any more information.
    Thanks in Advance
    Gopal N

  • No Stock value at Storage location level in BW report

    I am facing problem in getting stock valuation at storage location level.
      The problem is that, in R/3 Stock valuation is done at plant level, when we do storage location to storage location movement , only stock quantity gets changed and no FI entry is getting generated . So there is no movement of stock values at all. when we load this transaction data into BW , obviously i will arrive with wroung value . so what to do in this case ?
    Thanks & Regds,
    Kavan

    Hi Kavan,
    Could you please explain the scenario & provide the Ds you are using.
    Thanks & Regards,
    Suneel

  • SIT Value and Stock value at storage location level

    HI
    Can anyone tell me how to get the following:
    1. The value of the Stock in Transit on monthly basis
    2. The value of the stock at storage location level. The Stock value is correct at      plant level
    Thanks in advance.
    Soumen

    Hello,
    (1) please have a look into the Howto Guide:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92c0aa90-0201-0010-17b1-bf5b11c71257
    (2) Please have a look into the note:
    589024
    And consider to use the feature Constant selection.
    http://help.sap.com/saphelp_nw04s/helpdata/en/d2/02223c5f00612be10000000a11402f/content.htm
    I hope this helps, Michael

  • Report for monthly stock value

    Hi SAP Gurus,
    Is there any report or transaction that can show monthly stock value based on plant/GL account balance ?
    Thanks for your help.
    Regards,
    Raj

    I personally do not trust info structure data which are basis to MC.9 and MC.5
    basis for MB5L is audit relevant data, while info structures are only statistics.
    Ideally the data should match, but if for some reason the update to the info structure fails, then the financial posting still happens as they are technically not in the same LUW.

  • Report for stock value at Warehouselevel

    Hi
    I need to generate  a report of stock value at the warehouse level.
    please let me know the tables to be linked to get the report.
    Thanks

    Hi Nainar,
    You can use MB52 and if you get the list you can use 'sum' icon to get the total value (on the selection screen you can set wether SAP should display values or not).
    You can also use MB5L, MC.A transactions. If you want to check the stock only for one material you can check it in material master record on Accounting1.
    BR
    Csaba

  • Storage Location Wise Stock Value field and Table

    Hi ,
    Please let me know the storage location wise stock value field and table.
    Regards
    Suresh

    Hi Suresh,
    As per my understanding it is not possible in a single Table.
    If this is required for customized Z report then use this logic it may gives the correct information.
    In the combination of MARD and MBEW.. From MBEW you can get the value for each Base Unit of Measure then multiply that value with storage location stock.
    It may usefull to u..in the mean time i will try for some other option.
    Please revert if u have any query.
    Regards
    Durga Sana

  • BW Stock Values (0IC_C03) by batch

    Has anyone successfully gotten stock values to display out of InfoCube 0IC_C03 at the Batch level?  I've reviewed OSS note 589024 and will continue to study it, but it isn't clear to me if this is possible.
    Stock values are correct at the plant-material level, but when a user drills down on batch, the values are wrong.  They want the report to "spread out" the inventory values amongst the batches but instead it just displays wrong values.
    We may end up implementing a back-end solution somehow but am wondering if anyone else has done development to get around this issue.
    Thanks,
    Chris

    Hello Chris.
    Miguel is right. We also implemented the code from the "How to" paper that comes with that note and is working just fine. However I've come with a problem that I can't find an answer yet...
    The paper tells you how to use a prequery for a single month, but what about an interval of time ??? I've tried to do it but I don't get correct values...
    Did you Chris or Miguel come with this issue as well ??
    Thanks,
    Luis

  • Stock Value on a Particular Date

    Dear Sir,
    As a part of our Inventory Monitoring , we need to have a list showing Item wise Stock Value on a particular date (or end of any month date) .
    Kindly guide us as what Tcode is available in SAP for getting such a list .
    Kindly help us pl .
    Rgds
    B Mittal

    Hi
    In MB5B report please select the Stock type as valuated stock, this will give you the Stock Value also.
    Thanks & Regards
    Kishore

Maybe you are looking for