Stock WM (922 Q)
Hi gurus,
I have a problem. I want to clean stock WM in 922 storage location but i don´t know how to do it.
There are negative (Q stock) and positive (no Q stock) in 922 storage location (U-ZONE ubication) for some materials.
For example, Material A in LS26 transaction (922 storage location - U-ZONE ubication)
-10 unit Q stock
10 unit stock
There are not opened transfer order or PCN
Stock IM is zero for these materials
Thanks in advance,
Good day.
I apologize. It was a mistake. The movement is a 714, no 711. Sorry
WM initial situation
IM initial situation (no stock)
When i move WM stock from 922 to 999 (LT01)
With LI21 post to increase QI stock (movement 714). It was increase IQ stock 10 units (MMBE)
Thanks
Similar Messages
-
Hi,
I am seeing some -ve stock in 922- posting change area.
how can i get rid of this stock?
thansk
AkkshayaHi,
The WM and IM stock are needed to be in sync. if the goods are received in the GR area and it has not been putaway, the WM stock will be lesser than the IM stock by the GR qnty. Hence, SAP uses this -ve stock to keep both WM and IM stock equal. once the material is put away and TO is confirmed in WM, the WM stock increases and -ve stock in the IM GR area is removed.
Regards,
Vijay Kumar -
Dear Friends,
I have a query in Warehouse Management, physically the stocks are not available in Invertory Management level but in LS24 the stock shows like below
Storagage type Storage bin Stock category total stock for putaway avialable stock pick quantity
922 TR-ZONE Q 5- 5-
922 TR-ZONE Q 5 5
now i want the stock to be zero,
please provide me the input how can make the quantity zero
Thanks inadvance
Regards
SriHi Jurgen,
Thanks for your valuable response.
Please tell how to process LU04, as i donot have idea on this part
regards
Sri -
Urgent 922 negative stocks and no open posting changes (LU04)
Hello Guys,
I will really appreciate your help to this problem:
I have in LX02 the figure shown below for a specific material over all storage types. I dont have open posting changes in LU04. All what I physically have are 9 pieces in 915 as shown below.
How can I eliminate the stocks in 922 ?
My ideas until now and the problems I encountered:
a) Idea: An inventory on 922. Problem: Iventory can be made, but it does not work for negative quantities.
b) Idea: To move the positive 14 unrestricted from 922 to 915 with a stock transfer. Then in MM to change the stock category. Problem: The availability in MM will still be 9 and i will not able to make a MM-Movement 322-Type to move 14 from 915->922 with stock category "Q"
c) Idea: Open Posting Changes in LU04. Problem: No posting changes open.
d) Idea: Reversal of documents. Problem: We already issued customer deliveries and invoiced them.
The differences internally in 922 and 999 are 0, but the stock category is another
-->Can I somehow make a stock transfer internally in WM from one stock category to another (from unrestricted to Quality)? Or which other method do you suggest.
<b>Material___Plnt_SLoc_C__Batch_____St.Type__Stor.bin____Available stock</b>
18009766___2580 5800_Q_N1232AA04____922___U-ZONE________14- EA
18009766___2580 5800____N1232AA04___922____U-ZONE________14 EA
18009766___2580 5800____N1232AA04___999____DIFFERENCE___14- EA
18009766___2580 5800_Q_N1232AA04____999___DIFFERENCE____14 EA
18009766___2580 5800____N1232AA04___915____BRAIN5_________ 9 EA
Thank you for your help
ManuelHi,
If you do not have any LU04 pending, you just need to use 2 times LT01 :
first LT01 movement 999
from : 999 Q 14 pieces
to 922 Q - 14 pieces.
Second LT01 movement 999
From 922 14 pieces
to 999 - 14 pieces
Then you will have only your 9 pieces in stock.
Rgds,
Philippe -
Issue in WM enabled with HU (Transfer of stock frm Quality to Unrestricted)
Hi,
We've a scenario in such a way of both WM with HU engagged together.
Transfer of a Material from Quality to unrestricted stock type using transfer posting.
1. in MB1B using mvt 321, stock of Matl A with qty 20 has been transferd from Quality to unrestricted.
2. Due to HU mapped, an OBD for posting change had been created.
3. wrt OBD, matl get packed,(as per packing instruction) which is identified with the HU no.
4. Subsequently a TO had been created and confirmed.
as of this stage the stock view in IM & WM is as follows:
IM
Unres -
nil
Quality --- 20
Due to effect of PCN, TO has been created to transfer the stock catogry within the same bin
WM
Bin 1 (Q) 20 --- 922 (Q) 20
922 20 --- Bin 1 20
5. Then as per the process of completion PGI has to occur so as to nullifying the the -ve stock in 922 storage type
so the stock levels will be
IM
Unres --- 20
Quality --- nil
WM
Bin 1 20
Issue case :
A mannual TO has been created moving the stock from Bin 1 to 922 , without doing step 5 (i.e w/o completion of PGI).
This lead my stock figs as
IM
Unres -
nil
Quality -
20
WM
922(Q) 20
This also causes storage unit status as " To be Picked". leads to stuck up to proceed further.
We also tried to do mannual TO to transfer the stock from 922 to BIn 1. Due to unavailabilty of the stock system throws error as -ve stock is not possible for 922 Storage type..
Seeking experts to help out this issue if possibly w/o any customising settings.
Regards,
Prasanna
Edited by: prasanna govindarajan on Sep 22, 2010 2:55 PMDear Venkat,
There is a tick mark in post to inspection stock indicator thereafter inspection lot tab in qa32 or qa11 is not activated.
Secondly, this is a stock item.
Thirdly, No PS module is implemented in my client
I think the user has posted the stock through MB1C with Movt.Type 503 into quality stock.At the time of this posting the 05 inspection type is not activated in QM view of Material Master thatswhy system does not created any inspection lot for this.
After some days,with out stock posting from inspection stock to unrestricted stock,he has activated 05 inspection stock for the first time.
Pl.suggest any possible solution .
Prashant -
Block stock or quality inspection
Hi,
We usually block the stock through MB1B 321/322 or 343/344 movements types. But we cant indicate warehouse number and storage type:
example: We have two units:
Material A
Batch: 1
Quantity 2
Storage type 010: 1 unit
Storage type 011: 1 unit
We need to block or put in quality control just 1 unit. We go to MIGO and we indicate:
Material: "A"
Bacth: 1
Quantity: 1
Movement type: 343.
But we can not indicate that we want to block just the unit on the 010 storage type or 011.
How can i do it? Through wich tcode?
Thanks in advance for the help.
Regards
EnzoHi
When you perform the MB1B in IM you shou;ld create a Posting Change Notice in WM (this is a setting you should maintain in OMLR) you will also create a negative and positve in interim st type 922
If you are blocking stock you will have a negative of unrestricted stock and a positive of blocked stock
You will find the Posting change notice in LU04 (you can set the system to call the WM transaction immediately also in OMLR)
You them create the TO for the PCN and specify from where you want to block the stock and the system will move the correct quantity of unrestrictede stock to 922 and move the stock in 922 to the bin where the unrestricted stock was and the process is cmp;lete (The TO will need to be confirmed and can be set to confirm automatically)
This will correct the stock
The system cannot 'assume' which bin you want to block the stock in and so you use the PCN, Just like a TR
I hope that this helps
Frenchy -
WM problem - material is locked in 922 TR-ZONE
Dear All,
We are facing a problem.
There were MB1B 344 booking and their WM counterpart wasn't executed well. The result that we had stock in 922 TR-ZONE (example):
<b>922 TR-ZONE</b>
materialA 'blocked' 10 pc
materialA 'free' -10 pcs (free means stock for unrestricted use)
<b>WH</b> (location in WH)
materialA 'free' 1000 pcs
I wanted to move 10 pcs 'free' to 922 TR-ZONE. In the first step I moved 5 pcs of them:
<b>922 TR-ZONE</b>
materialA 'blocked' 10 pc
materialA 'free' -5 pcs (free means stock of unrestricted use)
<b>WH</b> (location in WH)
materialA 'free' 995 pcs
But after that I'm not able to move 'free' stock to 922 TR-ZONE any more because the material is locked in 922 (I can see it in LT10). (confirmations are OK)
(I can move the 'blocked' stock from 922 TR-ZONE)
There was problem with materilB also and similar bookings were carried out and the remaining minus 'free' quantity in 922 TR-ZONE became locked too.
What is the reason? How can we solve this?
Please help in this issue.
Thanks,
CsabaDear Jürgen,
Thanks for your help.
I think you are right:
1. Quality guys should have do MB1B 344 counterpart in WM
2. I shouldn't have posted stock to 922 TR-ZONE and I sohould have used LU04.
I think if I had moved from normal bin the whole qty to 922 TR-ZONE to eliminate the whole negative stock at once I would have succeeded.
I guess the problem is because I just partially eliminated the negative stock in 922 - that is why the remaining qty is locked.
I don't know exactly why it is so, but the situation is that this problem do exist and I have to solve it somehow.
(my idea was to eliminate the negative 922 qty and after that move the blocked qty from 922 to its destination).
What can I do now?
thx
Csaba -
Hi,
We receive stock to a storage location FG10 which is warehouse managed by confirming Process orders.
Some one by mistake transported some changes in Production where this storage location was reomoved from Plant- Warehuse number assignment in config.
so for two days ,GR for production order stock was only visible in MMBE and not in WM LS26.
When this mistake was rectified(Config corrected), we see that there is some negative stock in interim 922 storage type (transfer).
We do not have any idea how we can get rid of this negative stock in 922 since there are no TRs and posting
change notices .
Can anyone please guide
br,
akkshayaHi,
in order to keep IM and WM "in balance" the system probably did create some negative postings on 922, but you should also have the same positive postings somewhere else within your warehouse. Did you make a search for a material where you have a negative with LS24 in order to see if you have a "counterbalancing" entry ?
I guess if you have that you could maybe use a TO to align WM.
Regards. -
hi gurus,
Can someone make me clear about posting changes in WM , we do a 321, we see negative quant in the interim storage type 922(posting changes) , but when I goto LU04 to see posting change notices , there is no posting change notice for the material.can someone help me clear this;
Thanks
Cheris THi gurus,
Thank you all for your valuable suggestions.I really appreciate your help.
I have identified the problem.The warehouse workers have been issuing goods from 922 storage type( cretaed TOs from 922 to 916) .,our warehouse monitor is not configured to show negative stocks. now we'll have to make adjustments(move stock form 001(actual storage type) to 922. I think this will clear the negative stocks in 922.
Can someone suggest me if this is the right way to solve this.
Thanks
Cheris T -
MB1B - Mvt Type 322 to Move Unrestricted to Quality.
I am trying to move stock to Quality using Movement type 322 in transaction MB1B and getting the message "Change Inspection Stock of Material XX in QM Only".
I checked the Material Master QM view and found that Inspection Setup is active which wont let me use MB1B to do the transfer posting.
Please suggest an alternate way to perform this task, I can't change material master data.
Thanks,
Rohit.Hi Gopinath,
Can u please suggest the Txn to clear the lot from QM before trying this step.
Also, this posting is moving the stock to 922 (Storage Type) TR-ZONE (Bin). Is there a way to directly move stuff to a specific storage type instead of the transfer one.
Thanks,
rohit.
Edited by: rohit singh on Apr 22, 2008 9:03 PM -
Re: stock is not in reality but shows at warehouse level
Dear Friends,
i have a problem. Mateiral is not avialble in inventory but it shows in warehouse at interim storage area (902,922 & 999)
as the material not exists in reality and shows in the above interim storage area.
how can i clear the stock from the ware house
please guide me on this issue
regards
RahulDear Rahul
Please go to Transaction code : LL01
Input your warehouse number and execute
Give the storage type values in Stock in interim storage types main screen Warehouse activity monitor screen and execute.
Output will display the open TR/TO etc
Please go thru and settle the open TR and TOs.
warm regards
Ramakrishna -
INterim storage bin to unrestricted stock movemnet
Dear All,
I have a problem in warehouse management
Step 1 After the GR(65000 units) my system will automatically create a TR and TO to the quality inspection .
Step 2 will clear the inspection lot by giving a Usage decision through the T.code QA32 to move the stock from quality to unrestricted stock
step 3 But the stock will not be going to the unrestricted area instead it is going to the intrim storage type 922 TR-Zone.
Step 4 If i see in the LS26 i am able to see the stock for put away as 65000 units and pick quantity as 65000 units and the stock type as quality
So the stock is still in quality, if i see the PO also it is showing that the stock is in quality
How can i move this out of the interim storage bin
I am pretty new to WM kindly advice me how to go about this ,
Regards,
D vasanthA PCN must have got created. Go to LU04, mtype 321, enter your material. It will display the PCN if any exists.
Select the PCN and create Transfer Order and confirm the TO -
Hi,
I have activated QM for a material done PO>GR however stock is not direceted to 917 it is going to 902.
I have standard settings for QM under interfaces where i have made settings so that i can create TO manually.Please suggest.
Regards
ShrinivasHello,
I assume that your QM is active with WM. If QM is active then system works as per following.
1.When you do GR system creates TR with 902 source storage type . This TR converted into TO with destination storage type 917& bin as a quant number.
2.You can take quality decision then system creates posting change notice & moves material from 917 to 922 & from 922 to final putaway storage type & bin.
For this you have to setup
1.movement type
2.Storage type search with 917 & Q.
Please use all the abiove hints to complet this scenario.
Regards,
Prashant -
Dear All
my senario is as following
After TO confirmation system showing stock in particular storage bin as well in interim storage bin 922 and system allowing to create TO for so many times against same TR
Please help in this regards
Regards
SumanSuman
If you have stock showing in 922 you must have an open Posting change notice.
Check in LU04 and process them
I hope that this helps
Frenchy -
MM Movement types for stock transit!
Dear Experts!
Can anyone let me know the movement types used for corresponding goods transaction in MM,
i.e. for goods reciepts all possible movement types and goods issues all movement types.
Regards,
ParwezHi,
GI: goods issue (consumption/usage, withdrawal) or goods receipt without reference
GR: goods receipt with reference to a purchase order or production order
GD: goods movement with reference to a delivery (from the Shipping component)
RE: return delivery, return, reversal
RE: returns reversal
TP: transfer to company's own stock
TF: transfer posting
TR: reversal of transfer posting
SLS: sales value receipt
101 GR goods receipt
102 Reversal of GR
103 GR into blocked stck
104 Rev. GR to blocked
105 GR from blocked stck
106 Rev.GR from blocked
107 GR to Val. Bl. Stock
108 GR to Val. Bl. Rev.
109 GR fr. Val. Bl. St.
110 GR fr. Val. Bl. Rev.
112
121 GR subseq. adjustm.
122 RE return to vendor
123 RE rtrn vendor rev.
124 GR rtrn blocked stck
125 GR rtn blkd stck rev
131 Goods receipt
132 Goods receipt
141 GR G subseq. adjustm
142 GR G subseq. adjustm
161 GR returns
162 GR rtrns reversal
201 GI for cost center
202 RE for cost center
221 GI for project
222 RE for project
231 GI for sales order
232 RE for sales order
241 GI for asset
242 RE for asset
251 GI for sales
252 RE for sales
261 GI for order
262 RE for order
281 GI for network
282 RE for network
291 GI all acc. assigmts
292 RE all acct assigmts
301 TF tfr.plnt.to plnt.
302 TR tfr.plnt.to plnt.
303 TF rem.fm.stor.to pl
304 TR rem.fm.stor.to pl
305 TF pl.in stor.in pl.
306 TR pl.in stor.in pl.
309 TF tfr.ps.mat.to mat
310 TR tfr.ps.mat.to mat
311 TF tfr. within plant
312 TR transfer in plant
313 TF rem.fm.str.toSLoc
314 TR rem.fm.str.toSLoc
315 TF pl.in str.in SLoc
316 TR pl.in stor.inSLoc
317 Create struct. mat.
318 RE create struc. mat
319 Split structured mat
320 RE split struct.mat.
321 TF quality to unrest
322 TR quality to unrest
323 TF quality in plant
324 TR quality in plant
325 TF blocked in plant
326 TR blocked in plant
331 GI to sampling QI
332 RE to sampling QI
333 GI to sampling unre.
334 RE to sampling unre.
335 GI to sampl. blocked
336 RE to sampling blkd
340 TF bch revaluation
341 TF unrestr.to restr.
342 TF unr. to rstricted
343 TF blocked to unre.
344 TR blocked to unre.
349 TF blocked to qual.
350 TR blocked to qual.
351 TF to stck in trans.
352 TR to stck in trans.
401 TP own from sls.ord.
402 TP own to sales ord.
403 TP own from consgt.
404 TP own to consgt.
405 TP own from project
406 TP own to project
411 TP own to own
412 Reversal own to own
413 TP SLoc to sls order
414 Rev. SLoc to sls ord
415 TP SLoc to project
416 Rev. SLoc to proj.
441 TP unrstr.to tiedEmp
442 TP tiedEmp.to unrstr
451 GI returns
452 RE returns (rev.)
453 TP returns to own
454 TP own to returns
455 TF st.tfr. returns
456 TR St.tfr. returns
457 TP Ret.to own QIS
458 TP Own QIS to ret.
459 TP Ret.to own blckd
460 TP Own blckt to ret.
501 GI receipt w/o PO
502 RE receipt w/o PO
503 GI receipt to qual.
504 RE receipt to qual.
505 GI receipt to blockd
506 RE receipt to blockd
511 GI deliv. w/o charge
512 RE deliv. w/o charge
521 GI receipt w/o PrOrd
522 RE receipt w/o PrOrd
523 GI quality w/o PrOrd
524 RE quality w/o PrOrd
525 GI blkd w/o prod.or.
526 RE blocked w/o PrOrd
531 GI by-product
532 RE by-product
533 GI by-product
534 RE by-product
535 GR by-prod. sls.ord.
536 GR by-prod. sls.ord.
541 GI whse to subc.stck
542 RE subctrStck toWhse
543 GI issue sls.ord.st.
544 GI receipt sls.or.st
545 GI rcpt SC by-prod.
546 GI issue SC by-prod.
551 GI scrapping
552 RE scrapping
553 GI scrapping QI
554 RE scrapping QI
555 GI scrapping blocked
556 RE scrapping blocked
557 GI adjust. transit
558 GI adjust. transit
561 GI entry of st. bals
562 RE entry of st.bals.
563 GI EntrStBals: QI
564 RE EntrStBals: QI
565 GI EntrStBals: blckd
566 RE EntrStBals: blckd
571 GI receipt assembly
572 RE receipt assembly
573 GI rcpt QI assembly
574 RE rcpt QI assembly
575 GI rcpt blkd assmbly
576 RE rcpt blkd assmbly
581 GI by-prod. network
582 RE by-prod. network
601 GD goods issue:delvy
602 RE goods deliv. rev.
603 TF rem.fm.stor.to pl
604 TR rem.fm.stor.to pl
605 TF pl.in stor.in pl.
606 TR pl.in stor.in pl.
617 Cre. Str. Mat. Cons.
618 RE Cr. Str. Mat. Con
619 Rem. Str. Mat. Cons.
620 RE Rem. Str Mat Cons
621 GI ret.pack.:lending
622 GI ret.pack:ret.del.
623 GI iss:cust.ret.pack
624 GI rcpt:cust.re.pack
631 GI consgmt: lending
632 GI consgmt:ret.delvy
633 GI iss: cust.consgmt
634 GI rcpt:cust.consgmt
635 TF consgmt lending
636 TR consgmt ret. del.
641 TF to stck in trans.
642 TR to stck in trans.
643 TF to cross company
644 TR to cross company
645 TF cross company
646 TR cross company
647 TF to stck in trans.
648 TR to stck in trans.
651 GD ret.del. returns
652 GD ret.del. retn rev
653 GD returns unrestr.
654 GD returns unr. rev.
655 GD returns QI
656 GD returns QI rev.
657 GD returns blocked
658 GD returns blk. rev.
661 GI returns to vendor
662 RE ret. to vdr revrs
671 TR to stck in trans.
672 TF to stck in trans.
673 TF to cross company
674 TR to cross company
675 TR cross company
676 TF cross company
677 TR to stck in trans.
678 TF to stck in trans.
6A1 TF GI1
6A2 TR GI1
6A3 TF CC GI1
6A4 TR CC GI1
6A5 TF CC GI1
6A6 TR CC GI1
6A7 TF GI1
6A8 TR GI1
6B1 TF GI2
6B2 TR GI2
6B3 TF CC GI2
6B4 TR CC GI2
6B5 TF CC GI2
6B6 TR CC GI2
6B7 TF GI2
6B8 TR GI2
6K5 TF GI2 consi
6K6 TR GI2 consi
6W5 TF GI1 consi
6W6 TR GI1 consi
701 GR phys.inv.: whse
702 GI phys.inv.: whse
703 GR phys.inv: QI
704 GI phys.inv: QI
707 GR phys.inv.:blocked
708 GI phys.inv.:blocked
711 GI InvDiff.:whouse
712 GR InvDiff.:wrhouse
713 GI InvDiff: QI
714 GR InvDiff: QI
715 GI InvDiff.:returns
716 GR InvDiff.:returns
717 GI InvDiff.: blocked
718 GR InvDiff.: blocked
721 SlsVal.rec.n.afftMgs
722 SlsVal.iss.n.afftMgs
731 SlsVal.rec. afftgMgs
732 SlsVal.iss. afftgMgs
801 GR adv. inv. + tax
802 RGR ad. inv. + tax
803 GR AI ICMS/IPI
804 RGR AI ICMS/IPI
805 GR bl. AI w. tax
806 RGR bl. AI w. tax
811 GR TP dely w. tax
812 RGR TP dely w tax
815 GR B TP dely w. tax
816 RGR B TP dely w. tax
821 GR val. VS w. tax
822 RGR val. VS w. tax
825 GR B val. VS w. tax
826 RGR B val. VS w. tax
833 Reval. iss. w. tax
834 R reval. iss. w tax
835 Reval. rec. w. tax
836 R reval. rec. w tax
841 GR RTP
842 RGR RTP
843 GR RTP w. tax
844 RGR RTP w. tax
861 GR TF SD/MM
862 GI TF SD/MM
863 GI TF SD/MM return
864 GR TF SD/MM return
901 GI internal c.center
911 GI receipt w/o PO
922 RE return to vendor
Maybe you are looking for
-
Enter the following numbers into sequencial cells: 1, 3, 21, 15, 31 Next create a 2D line graph, in the inspector window select the Chart tool and select the Series tab. Change the Connect Points to Curve. I'm seeing the curved line between the first
-
IR Default Search operator change
Hi APEX version: 4.0 I want to change the IR default search operator as 'LIKE' instead of 'CONTAINS'. but I know both are simply different by upper(). The APEX generates the IR filter query in where clause as below, In default the where clause (I sel
-
Goldengate:error in sqlexec clause
This is more than a table synchronization, using specific values instead of code map cz.tbs_test1, target cz.tbs_test2, sqlexec (id cs, query "select a.ryxb,b.csdm,b.csmc xbmc,a.rymz,c.csdm,c.csmc mzmc from cz.tbs_test2 a, (select csdm,csmc from cz
-
My 4s is locked on the iTunes screen. Rebooted it several times to no avail. I was in the middle of updating to the 7.1 and it shut down, then froze on itune
-
ORA-01008 in CallableStatement
It goes like this: String sqlStatement = "{ ? = call myFunction(?,?,?)}"; CallableStatement cstmt = getConnection().prepareCall(sqlStatement); cstmt.registerOutParameter (1, OracleTypes.CURSOR); cstmt.setDate(1, new java.sql.Date(date.getTime())); cs